Hi guys
My phone is rooted with liquidSmooth v2.2 this is the second time my phone stay on usb plugged and show that is charging but is not plugged in the usb.
First time whe battery goes to 85% phone start to wake up and i cant swith off the screen.When reach 77% the phone is Okey.
Flash it with mobile odin and put the same Rom.
The second time was yestarday
I flash criskelo v8, first make nandroid backup(liquid),after that i back to the liquid by using nandroid restore and pooof.
I charged my phone unplugg but on the screen still charging.
try to flash again full flash but still the same.
I need some Help
What u think is this software or Hardware problem
My friend got the same problem few days back
I think its a hardware problem
She got it repaired under warranty
Better clear your flash count,flash a stock rom and go to service center
First you can clean usb port with alcohol and cotton bud, sometimes fixes usb issues
Sent from my GT-N7000 using xda premium
Related
please, help me guys and girls!!!! my phone is getting crazy!!! although i am on 100% charge, if i turn it off and trying to turn it back on, it shows me the sign of an empty battery and nothing happens. i am back to latest stock rom, 2.2.1 XWJS5 from darky's 9.3 beta. i did a clean instal with odin with repartition and then a partition format. i did that because, when in charge, the phone was telling me to turn on the usb if i want to transfer files. i really don't understand anything. and besides that, the whole screen was bouncing and telling to check the usb cable even though it was no usb cable plugged.
I would suggest a wipe of phone and flashing with pit and repartition to Eclair .
See if that fixes the problem if it does you can upgrade .
http://forum.xda-developers.com/showthread.php?t=817703
jje
Thank you very much. I did a fresh install with odin and repartition of a stock rom, the latest xjs5. It only happened once. The thing is now, if I turn the phone off, I can't turn it back on, it shows me the same, an empty battery and the phone is dead. Once I plug it in an electrical socket is back to life in 10 seconds
Sent from my GT-I9000 using XDA App
But this sudden death happened before, when the problems started
Sent from my GT-I9000 using XDA App
Probably the word Beta in the rom you used is the original problem .
jje
It happened before i installed the beta
Sent from my GT-P1000 using XDA App
I bricked my phone a while back (SGS I9000 2.1) using firmware from samfirmware. It would get to the galaxy S startup screen then reboot (Stuck in that loop). i still had the 3BC at this point.
Being new to flashing using odin i downloaded Odin3 One-Click Downloader (http://forum.xda-developers.com/showthread.php?t=731989) after i applied the fix i realised i do not have this phone. The phone was bricked couldnt get 3BC no conectivity with adb on my pc, the phone was stuck on an AT&T screen and im in the UK.
I built the Jig with the 301K resistor to get into download mode and it worked first time. After doing alot of research on how to flash the I9000 i flashed a random 2.1 firmware and it booted again.
The problem i have is i cannot enter recovery/download mode and when the phone boots it looks like artifacts pop up for a second then it boots to galaxy s screen (green and purple line across the screen, sometimes looks like a tv screen with no channels black and white fuzzy).
Also when the phone is off and i try charging nothing appears on the screen and it dosent turn on with the charger plugged in. Then as soon as i remove the charger it automaticlly turns on. I think this is causing the last issue, when my phone runs out of battery it dies completly and wont turn back on, somtimes if im lucky i can charge it for about 1 Hour, remove the charger and it will automaticlly turn on and quickly plug the charger back in when it boots its got 1% battery. so i dont think my phone charges when off.
I have tyied applying the 3BC fix for the I9000 but no luck it just bricked my phone had to use the Jig again to recover.
If anyone knows how to fix this annoying problem Please help me!!!
I am running Darky's ROM 9.3 Beta 3 with Voodoo 1.3b oc uv kernel 1280MHz
so the jig is working ???
Try to flash an old firmware, something like eclair with all 3 files and pit, then use pit and re-partition in odin and if that works, try to calibrate the battery.. if you have any luck then upgrade to something newer, maybe thru samfirmware.com or officially thru kies.
i hope you get it fixed
ps. have you tried another battery to make sure your current one isnt faulty ??
Thanks will try it now. I think the battery is fine I get an avarage of 24hr usage set CPU min 100 Max 1280.
Sent from my GT-I9000 using XDA App
Now fixed, installed JVK with the safe bootloader.
Sent from my GT-I9000 using XDA App
Changed the title as it has been solved.
My phone was acting up so I restarted the phone and it gets to the samsung galaxy I9000 screen an shuts off. When I connect it to my PC or a wall outlet via usb cord, the battery charge screen comes on for a sec and goes blank and back and so on.....it wont charge. I tried the hard restart and it doesnt work and when I try the download mode it goes to a yellow screen with a triangle. It says downloading....
Not sure if thats working properly.
Is this a problem where I can flash my phone and fix this.
Because sending my phone off to a center would take forever.
Any advice would be greatly appreciated. Thanks.
Well first of all your download mode is working fine. For your problem i have few questions: does your pc recognize your phone and can you charge it. Have you bought it with that problem or it has suddenly happened? I think that this is a hardware problem but we should wait for other opinion
Sent from my GT-I9000 using XDA App
If your phone was hacked before (rooted, flashed new firmware), you should reflash it with a clean firmware (or ask someone who has experience). If not, that might be a virus which rooted and damaged your software. There were some of these in the market. This could also be repaired by flashing. But you'll lose your warranty.
You have a "boot-loop". Your download mode is working. So you can flash stock firmware. Find your country specific firmware and use ODIN! But please read up on which version of stock you have to flash.
basically i messed up the bootloaders now it does this (bear with me)
http://www.youtube.com/watch?v=QkFsZK79XYQ
it only does this when plugged into the wall and it will not do anything if plugged into usb port on the pc, my guess now is the battery is so flat that it wont do a thing any more! i almost got it to run via odin on the pc but the battery drained so bad that it wont respond, i have left it plugged in for at least 6 hours with then just the same response just on and off on and off.
can i take the battery out and charge it via a separate charger to get some life into it to then flash the stock rom via odin?
any ideas would be great! i don't mind taking it apart but don't want to if i'm going to fry the battery i have all sorts of wall chargers, can i join the + and - from the wall charger to the correct wires on the battery for it to charge? i have a multimeter to test the batteries voltage. any suggestions?
[UPDATE 1 ] flashed overcome stock rom then pc wont connect to odin even in recovery mode, :recovery is stock: :rom is stock: from the overcome website, cant flash any rom via odin as it wotn connect, error message usb device not recognised' how to fix this issue? maybe update.zip via sdcard within stock recovery? which rom and for gt-p1000 united kingdom. i tried to reinstall samsung kies for the correct driver but still the same issue, cannot connect after flashing. i have been following this guide http://p1000.teamovercome.net/?page_id=64 any help with connection would be great or flashing via recovery, almost unbricked but not quite.
my connection problem was due to a faulty usb cable, all is fixed now and i have overcome kratos.installed and running sweet
Hello, I don't think that you have a dead battery. I think your rom has a defect cause your Tab would like to boot. Is it possible to go to recovery or to the download mode? Try to flash something. Does your Tab start this screen flash automaticly by plug on a PC od starts this only if you try to turn it on?
PS: It is possible to remove the battery but it is a little difficult. My suggestion: don't touch the Battery
will not go to download mode or recovery. no response when pushing power power button, all i get is the flashing screen with pc and mobile phone connection.
i left tab connected to the pc for one hour, the tab came on with the pc-phone connection image, i flashed overcome rom via odin with repartition which completed but when it went to reboot it has stayed turned off and wont come on at all even when pressing the power button, no download mode and no recovery, i will wait again for it to come on and try the stock rom, not sure if i've got the correct bootloaders or not.
any ideas?
Have you tried leaving it on the ac outlet? or car charger?
ok slight update. . .
i left it plugged into the pc after it passed the odin flash it then BOOTED i was like WWWAAAAAAHHHHOOOOO bouncing on my chair and feeling very happy indeed the battery is totally dead but is now charging in the wall switched off to get some life back into the battery im so pleased
next steps is to get the overcome rom to flash!
lexriley said:
Have you tried leaving it on the ac outlet? or car charger?
Click to expand...
Click to collapse
i tried for 6 hours to plug it directly into the wall but nothing worked.
Exact same thing happened to me on the Sprint Tab. Called Samsung and sent the unit in. They sent me a brand new unit the next week.
when plugged into my pc now i get an error message, ' usb device has not been recognised' im thinking its the drivers but not sure where to get them, i have searched.
i have updated the 1st post with more information on this issue.
Your tab was showing a secondary bootloader so if you mess up your primary bootloader with the bootloader patch it'll still be recoverable and as for getting overcome I would recommend upgrading to gingerbread which doesn't have protected bootloaders and flash kratos or Jupiter which are faster than the froyo based overcome rims ;-)
Sent from my GT-P1000 using XDA Premium App
Roms*
Sent from my GT-P1000 using XDA Premium App
the only issue im having now is the fact that the pc wont recognise the android phone when in download mode.
the only message i get on the screen is 'usb device not recognised' i am then unable to flash a different rom or a stock rom via odin being gingerbread or froyo. thats why im asking if there is an update.zip file that i can flash from the recovery to make the usb mode work as it wont even work with debugging mode on or off and wont show via samsung kies or odin when the tab is booted.
my connection problem was due to a faulty usb cable, all is fixed now and i have overcome kratos.installed and running sweet
good troubleshooting!!! I
Sent from my GT-P1000 using XDA Premium App
I have been flashing roms and kernels on my note since the day I got it on release.. Could say I'm bit of a flashaholic, but Friday I made the mistake of not using a SAFE kernel from xda but installed clockwork mod recovery from rom manager.. After I wiped data and proceeded to flash a custom rom my phone turnt off and I haven't been able to turn it back on. I can't get into recovery or download mode. My pc is picking up the phone but is throwing out USB not recognisable errors.. Could this be the dreaded hard brick and would a Samsung jig be my way out of it?
u said while flashing the rom the phone went off.. could it be possible that the battery is dead?
The battery was fully charged whilst flashing... And since it happened I have had my phone on charge whilst at work to see if that was the fault.
If phone is taking charging den use jig.
Hit thanks button please
Sent from my GT-N7000 using xda app-developers app
I have no charge screen on the note but my charger has LEDs on to show charging. Should there be a charge screen whilst bricked?
it depends.. if its hard brcked then no just black screen
Thanks a lot. I'm sure with my pc throwing out USB not recognised errors I should be fine when my jig arrives. I'll let you know the results
hopefully. keep us posted