Related
Hi, i have galaxy tab:
PDA: XWJMG
PHONE: XXJMA
Now i started ODIN 1.7 and selected p1000-mck-r3-ext4-cwm.tar in PDA. I didnt select Re-Partition and did not tick anything and did not select PIT file. Now when i connect it says 'added' and when i click on start it goes through the process and says "failed' in the end. Now my tab shows yellow triangle on it. Help
Do you by any chance have locked bootloaders? Anyway as long as the computer recognizes your tab you can fix it. Just use search.
Sent from my Desire HD using XDA App
Robi-K said:
Do you by any chance have locked bootloaders? Anyway as long as the computer recognizes your tab you can fix it. Just use search.
Sent from my Desire HD using XDA App
Click to expand...
Click to collapse
I dont know about bootloader, its an untouched piece. Please tell me how to fix this tab... :-(
Look at the stickyes in the gsm tab development. Just download a rom that doesn't contain bootloaders and flash it via odin. Again you can find such roms in the development section. Read read and read again and you will be able to fix your tab. One question, why did you flash your tab in the first place?
Sent from my Desire HD using XDA App
Download this firmware http://files.deodexed.com/ModADroid-Galaxy-Tablet/Rotohammer/JME/
Then goto http://forum.xda-developers.com/showthread.php?t=932082 & read the bit where it says if your tab does not boot...
Hope this helps
Mark
You need to dload the P1 hidden pit & full J4 version fw
Is it maybe because the rom you selected says cwm? Isn't that supposed to be flashed in clockwork mod?
Thanks guys for all your help, i flashed pit to my phone via ODIN and piece is alive and working now and gave the tab back to my friend. Now just need to know for the future i have ODIN v1.31 and P1_EUR.pit. I selected pit and P1000JPJJ2 on PDA. Now just need to know before flashing do i need to select repartition?
As i read through the tutorial you only select repartition when you are flashing with the pit file!
If you are installing firmware, Flash the custom kernel that is linked on the same page as the overcome rom 2.13 without partition, Then hold vol up and power will put you in recovery mode, You can flash the rom through there useing the install zip from sdcard option but you must copy the custom rom onto the sd card first....
Regards
Mark
slyevo said:
As i read through the tutorial you only select repartition when you are flashing with the pit file!
If you are installing firmware, Flash the custom kernel that is linked on the same page as the overcome rom 2.13 without partition, Then hold vol up and power will put you in recovery mode, You can flash the rom through there useing the install zip from sdcard option but you must copy the custom rom onto the sd card first....
Regards
Mark
Click to expand...
Click to collapse
Well, i know how to flash custom rom, just wanted to flash the firmware through odin since it seems easier...i downloaded P1000JPJJ2 from the following site and it says no repartition, my problem solved..thanks anyway
http://www.thegalaxytabforum.com/index.php?/topic/112-samsung-galaxy-tab-firmware-list/
i have the same problem like the first post. I am using P1000 for asia (malaysia). now i can do nothing with my tab but odin still able to detect it. anyone could help forward me the link for the said rom without bootloader. the link given in the previous post already dead.
andrew21 said:
Hi, i have galaxy tab:
PDA: XWJMG
PHONE: XXJMA
Now i started ODIN 1.7 and selected p1000-mck-r3-ext4-cwm.tar in PDA. I didnt select Re-Partition and did not tick anything and did not select PIT file. Now when i connect it says 'added' and when i click on start it goes through the process and says "failed' in the end. Now my tab shows yellow triangle on it. Help
Click to expand...
Click to collapse
I had the same problem earlier and then i learned that bootloader for stock JM is signed so it show error ... completion (write) failed ... when you try to upgrade or install custom rom using Odin. I reverted back to resurrect my tab by Odin with pit (follow pit version) and check repartition, auto reboot. It works for me but not sure if it will work for others. Good luck.
Hello XDA Community,
I am an 2 year XDA veteran, so i am properly familiar with all things related to XDA.
I currently own a Xperia X10 Mini Pro and a Xperia Mini Pro....
I tinker a lot with these 2 phones. SE phones mainly need fastboot.....
I just brought a Samsung Galaxy Note(SGN) N7000 (India) a few days back and am really excited to run CM9 on it.....
But i have alot of unanswered questions.....
So i just need the community's help...
1. Does the SGN have a stock recovery....????
My cousin has a Galaxy Tab 8.9 and it had a stock recovery. I just flashed a zip to root it and another zip for CWM......
2. What exactly is ODIN....?????
The Tab 8.9 had ODIN with a Recovery but our SGN does not seem to have one.......
3. Is it safe to upgrade to official Samsung ICS......????
There is alot of talk going on in the forum about HARD BRICKING our SGN if we upgrade........
4. What do i exactly have to do to get CWM......????
The guides in Development Section by dr.ketan have me totally confused, though i have rooted my SGN using DoomLord's Kit............
I am new to Samsung devices ant dont know the way they work.....
So any help will be extremely appreciated.......
Thanks.
1 there is a stock rom you can flash it with odin
2 odin allow you to flash your sgn
3 no it is safe
4 you can download it and flash it with odin
If you want a link for your odin or for a rom just post.
Sent from my I9300 using XDA Premium
lhamza said:
1 there is a stock rom you can flash it with odin
2 odin allow you to flash your sgn
3 no it is safe
4 you can download it and flash it with odin
If you want a link for your odin or for a rom just post.
Sent from my I9300 using XDA Premium
Click to expand...
Click to collapse
I used Vol down + home + power while starting up, and the phone booted into ODIN but there is no recovery.....
The screen only shows " Start Downloading"...
What is this........???/
Whereas the ODIN in Tab 8.9 gave options to flash .zips and much more......
Help please......
Thats download mode, you use with odin from your PC.... use Vol up + home + power for recovery
Download mode is mostly used to flash stock roms (afaik) and they can be found http://www.sammobile.com/firmware/?page=3&t=1&o=1&m=GT-N7000&r=-1#modelsa
amey2606 said:
I used Vol down + home + power while starting up, and the phone booted into ODIN but there is no recovery.....
The screen only shows " Start Downloading"...
What is this........???/
Whereas the ODIN in Tab 8.9 gave options to flash .zips and much more......
Help please......
Click to expand...
Click to collapse
You are talking about download mod just download your rom and put it on odin and start downloading
Sent from my I9300 using XDA Premium
Xalies said:
Thats download mode, you use with odin from your PC.... use Vol up + home + power for recovery
Download mode is mostly used to flash stock roms (afaik) and they can be found http://www.sammobile.com/firmware/?page=3&t=1&o=1&m=GT-N7000&r=-1#modelsa
Click to expand...
Click to collapse
I am on 2.3.6 and i used vol up + home + power and i successfuly entered recovery.......
Thanks...
I just had another question, is there any .zip file that can be flashed to install CWM, meaning a CWM .zip file...............??????????
Thanks very much.
And i also tried updating to official ICS through KIES on PC but the download is very slow (my d/l speed is 1mbps) and it times out at 45-50 %........
Any idea..... ????/
amey2606 said:
I am on 2.3.6 and i used vol up + home + power and i successfuly entered recovery.......
Thanks...
I just had another question, is there any .zip file that can be flashed to install CWM, meaning a CWM .zip file...............??????????
Thanks very much.
And i also tried updating to official ICS through KIES on PC but the download is very slow (my d/l speed is 1mbps) and it times out at 45-50 %........
Any idea..... ????/
Click to expand...
Click to collapse
Yes there is cwm.zip just download rom manager from market and search for install clock world mod recovery.
About the kies problem just use odin not kies.
You can upgrade with odin in 3 min
Sent from my I9300 using XDA Premium
lhamza said:
Yes there is cwm.zip just download rom manager from market and search for install clock world mod recovery.
About the kies problem just use odin not kies.
You can upgrade with odin in 3 min
Sent from my I9300 using XDA Premium
Click to expand...
Click to collapse
Thanks for your reply....
Can you please tell me the exact procedure on how to update from ODIN PC......????
amey2606 said:
Thanks for your reply....
Can you please tell me the exact procedure on how to update from ODIN PC......????
Click to expand...
Click to collapse
ok. first tell me what rom do you want.
and from what country?
lhamza said:
ok. first tell me what rom do you want.
and from what country?
Click to expand...
Click to collapse
I installed ROM Manager from market but there is no recovery for SGN N7000......
I am from India (INU)
I wanted to update to the official Samsung ICS ROM........
ok download rom from here http://www.hotfile.com/dl/156601210/d18d7d5/N7000DDLP8_N7000ODDLP5_INU.zip.html
and odin from attachement
extract the odin file and open it .then choose the pit file .
after the rom finish downloading .
extract it and you well get N7000DDLP8_N7000ODDLP5_HOME.tar.md5
go to odin and click pda then choose the extracted file
then connect your phone in download mode odin will detected (yellow collor )
then press start and wait until odin is finished you can know that with pass
thanks if i helped you
lhamza said:
ok download rom from here http://www.hotfile.com/dl/156601210/d18d7d5/N7000DDLP8_N7000ODDLP5_INU.zip.html
and odin from attachement
extract the odin file and open it .then choose the pit file .
after the rom finish downloading .
extract it and you well get N7000DDLP8_N7000ODDLP5_HOME.tar.md5
go to odin and click pda then choose the extracted file
then connect your phone in download mode odin will detected (yellow collor )
then press start and wait until odin is finished you can know that with pass
thanks if i helped you
Click to expand...
Click to collapse
Thanks but what if i want to install CM9....
they say we need to be on GB to install CM9 and need CWM....
How do i install CWM.........????????
Its not availacle on ROM Manager.....
I tried thishttp://forum.xda-developers.com/showpost.php?p=26455511&postcount=2475 CWM.zip file but i get
" failed to verify whole-file signature".......
Any help on this.....?????
amey2606 said:
Thanks but what if i want to install CM9....
they say we need to be on GB to install CM9 and need CWM....
How do i install CWM.........????????
Its not availacle on ROM Manager.....
I tried thishttp://forum.xda-developers.com/showpost.php?p=26455511&postcount=2475 CWM.zip file but i get
" failed to verify whole-file signature".......
Any help on this.....?????
Click to expand...
Click to collapse
you can install it with odin mobile
http://turbobit.net/download/free/wcsc1f8j8p8c
here is the cwm link http://download.chainfire.eu/163/CF-Root/SGN/CF-Root-SGN_XX_OXA_LPY-v5.3-CWM5.zip?retrieve_file=1
Extract the downloaded file and copy it to your device. Launch Mobile Odin, tap “Open File” and select “tass-recovrery-cwm.tar"
lhamza said:
you can install it with odin
download it from attachement
the same thing choose pda then choose cwm and start
or flash it with odin mobile http://turbobit.net/download/free/wcsc1f8j8p8c
Extract the downloaded file and copy it to your device. Launch Mobile Odin, tap “Open File” and select “tass-recovrery-cwm.tar"
Click to expand...
Click to collapse
This is using ODIN, but how can i install CWM using stock recovery......?????
amey2606 said:
This is using ODIN, but how can i install CWM using stock recovery......?????
Click to expand...
Click to collapse
i change the last post check it
lhamza said:
i change the last post check it
Click to expand...
Click to collapse
ok thanks but i think i am still confused, a lot.....
odin is terrifying me (dont want to brick my note).......
i will try it later.....
XPERIA phones were not so complicated.
thanks for all your help though...... ;-)
you re welcome
Just one thing odin does not brick any device .
I use odin every week. And i never bricked my device.
Just do what i told you and your device will be fine.trust me
Sent from my S9300 using xda premium
lhamza said:
you re welcome
Just one thing odin does not brick any device .
I use odin every week. And i never bricked my device.
Just do what i told you and your device will be fine.trust me
Sent from my S9300 using xda premium
Click to expand...
Click to collapse
I was under the impression that we could install CWM by just flashing a CWM.zip file through Stock Recovery..........................
Moved To Q&A
Please post all questions in the Q&A section
amey2606 said:
I was under the impression that we could install CWM by just flashing a CWM.zip file through Stock Recovery..........................
Click to expand...
Click to collapse
Yes you can do that. Just search for it and you will find it
sent from my S9300 using XDA Premium
Guys I rooted my galaxy ace and installed cyanogenmod after making a backup of stock rom in clockworkmod v.5xx... now I wish to go back on my stock rom.. so I wiped everything in clockworkmod and restored the backup of stock rom... restoring was successful but when I rebooted the phone, it stucks on samsung galaxy ace s5830 screen and doesn't go any further from there... I gave it 20mins but nthn happens n it doesn't go further from that screen... so plz help n tell me what to do ? It would be great if any1 can provide me like of flashable stock rom of galaxy ace which I could flash in clockworkmod... plz help guys.
Sent from using xda premium
stock roms are not flashable via cwm ...u need odin
boot into download mode and flash a stock rom via odin..
King ACE said:
boot into download mode and flash a stock rom via odin..
Click to expand...
Click to collapse
Thanks for replying... but can u plz tell me that how to go in download mode in the phone ?? Plus it would be great if u could provide me download links of odin n stock rom of galaxy ace ?? Am a newbie :-\
Sent from my HTC Wildfire using xda premium
download mode can be done by pressing Middle Key(HOME Key) + Power key and Volume Down Key .
Here is what you will need:
1. You might already have USB drivers for you Ace if you have Kies installed. If not, download manually from here.
2. Download Odin Multi Downloader v4.38 (Imp.- version no. is important) and the cooper_v1.0.ops file from http://www.mediafire.com/?lga31u288f6nvu2
3. Now download a firmware of your choice from samfirmware.com.
link for latest india baseband firmwre :- http://www.hotfile.com/dl/148986856/f274ebd/S5830DDKQ8_S5830ODDKQ7_INU.zip.html
4. Make sure you have the phone’s battery charged to at least 40-50%.
Now that you have everything now you need to go and set Odin.
1. On ODIN select the OPS button and load the Cooper_v1.0.ops file unto it. Ensure that the Auto-Reboot, Protect OPS and Reset Time is checked.
2. Unzip the firmware .Zip file in a folder If you get have the contents in .TAR (or .tar.md5), Check “One Package” option on the left side & skip PDA, Phone, CSC, BOOT options & directly go to ‘One Package’ option. Browse for the .tar (or .tar.md5) file & select it
3.enter into dwld mode
4.click on start
the whole process wud take arnd 5 mins.if it bootloops on restarting.enter into recovery(home + power button) n erase caches.
As its filesystem conflict you just need to flash cf-root to boot your backup...seriously ppl reply with extreme final solutions
Sent from Galaxy Ace which just landed on "MOON"
Nakulkhanna said:
Guys I rooted my galaxy ace and installed cyanogenmod after making a backup of stock rom in clockworkmod v.5xx... now I wish to go back on my stock rom.. so I wiped everything in clockworkmod and restored the backup of stock rom... restoring was successful but when I rebooted the phone, it stucks on samsung galaxy ace s5830 screen and doesn't go any further from there... I gave it 20mins but nthn happens n it doesn't go further from that screen... so plz help n tell me what to do ? It would be great if any1 can provide me like of flashable stock rom of galaxy ace which I could flash in clockworkmod... plz help guys.
Sent from using xda premium
Click to expand...
Click to collapse
download firmware your handphone in samfirmware.com
and flash via odin download on samfirmware too
madman said:
As its filesystem conflict you just need to flash cf-root to boot your backup...seriously ppl reply with extreme final solutions
Sent from Galaxy Ace which just landed on "MOON"
Click to expand...
Click to collapse
What's cf-root ?? N where can I find ?? And in which order should do this ?
Sent from using xda premium
Nakulkhanna said:
What's cf-root ?? N where can I find ?? And in which order should do this ?
Sent from using xda premium
Click to expand...
Click to collapse
CF-ROOT is a custom kernel made by ketut.kumajaya ......flash it via cwm recovery
kidoman said:
download mode can be done by pressing Middle Key(HOME Key) + Power key and Volume Down Key .
Here is what you will need:
1. You might already have USB drivers for you Ace if you have Kies installed. If not, download manually from here.
2. Download Odin Multi Downloader v4.38 (Imp.- version no. is important) and the cooper_v1.0.ops file from http://www.mediafire.com/?lga31u288f6nvu2
3. Now download a firmware of your choice from samfirmware.com.
link for latest india baseband firmwre :- http://www.hotfile.com/dl/148986856/f274ebd/S5830DDKQ8_S5830ODDKQ7_INU.zip.html
4. Make sure you have the phone’s battery charged to at least 40-50%.
Now that you have everything now you need to go and set Odin.
1. On ODIN select the OPS button and load the Cooper_v1.0.ops file unto it. Ensure that the Auto-Reboot, Protect OPS and Reset Time is checked.
2. Unzip the firmware .Zip file in a folder If you get have the contents in .TAR (or .tar.md5), Check “One Package” option on the left side & skip PDA, Phone, CSC, BOOT options & directly go to ‘One Package’ option. Browse for the .tar (or .tar.md5) file & select it
3.enter into dwld mode
4.click on start
the whole process wud take arnd 5 mins.if it bootloops on restarting.enter into recovery(home + power button) n erase caches.
Click to expand...
Click to collapse
hey brother i have 2 questions... so plz reply...
1) i dont have kies installed but when i connect my ace through data cable... it does gets detected n i can even transfer files n stuff in mass storage mode.. so do i still need to download USB drivers?? if yes then from where???
2) i have cyanogenmod isntalled currently, so before starting this process do i wipe everything in clockworkmod, like we do before installing a new rom?? or i just start this process by going in download mode over the cyanogenmod ??
plz reply asap. thanks
deleted...
hey guys one more thing... i just downloaded the .Rar file for .ops file n odin setup in it... named "Flashprogram Samsung S5830 + Ops.rar" from samfirmware, but the file is password protected.. means i cant extract anything coz it asks for password... now plzz help me and tell me a solution or the password.. plzz help guys.
password should be sammobile or samfirmware..
King ACE said:
password should be sammobile or samfirmware..
Click to expand...
Click to collapse
hey thanks a lot brother... it worked...
and i have 2 questions... so plz reply...
1) i dont have kies installed but when i connect my ace through data cable... it does gets detected n i can even transfer files n stuff in mass storage mode.. so do i still need to download USB drivers?? if yes then from where???
2) i have cyanogenmod isntalled currently, so before starting this process do i wipe everything in clockworkmod, like we do before installing a new rom?? or i just start this process by going in download mode over the cyanogenmod ??
plz reply asap. thanks
Nakulkhanna said:
hey thanks a lot brother... it worked...
and i have 2 questions... so plz reply...
1) i dont have kies installed but when i connect my ace through data cable... it does gets detected n i can even transfer files n stuff in mass storage mode.. so do i still need to download USB drivers?? if yes then from where???
2) i have cyanogenmod isntalled currently, so before starting this process do i wipe everything in clockworkmod, like we do before installing a new rom?? or i just start this process by going in download mode over the cyanogenmod ??
plz reply asap. thanks
Click to expand...
Click to collapse
Yes u do need to install drivers or else USB mass storage wont work and your phone wont connect to your pc..google them..
Yep..just boot into download mode and start odin...though wiping data should be done just in case...
before doing all those things you should have atleast taken care of going back to stock.. i am pretty damn sure that google will give you a complete noob guide to use and flash ROMS with ODIN on atleast 100 sites.. i am sure you can use google atleast ?
Complete soution :d [100%]
Nakulkhanna said:
Guys I rooted my galaxy ace and installed cyanogenmod after making a backup of stock rom in clockworkmod v.5xx... now I wish to go back on my stock rom.. so I wiped everything in clockworkmod and restored the backup of stock rom... restoring was successful but when I rebooted the phone, it stucks on samsung galaxy ace s5830 screen and doesn't go any further from there... I gave it 20mins but nthn happens n it doesn't go further from that screen... so plz help n tell me what to do ? It would be great if any1 can provide me like of flashable stock rom of galaxy ace which I could flash in clockworkmod... plz help guys.
Sent from using xda premium
Click to expand...
Click to collapse
Hey.
I made a guide to restore stock rom from your nandroid backup, this will surely help you: http://forum.xda-developers.com/showthread.php?t=1606336
Im going to try this. Thanks!
(DELETED)
Help !!!
Please respond if possible.
I have a rom based on CM 7.2, where the system ext4, Data ext4 and cache to ext4, and I want to go back to the stock rom gingerbread 2.3.3 via Odin 4.38. Do I have previously converted to the RFS or they can just install it over the original rom.
I've tried all over this tutorial but after I Odin says he managed to install the phone reboots and the samsung logo and spins it repeatedly.
Help.
Thanks for your reply.
so my galaxy note is rooted and was working fine until yesterday i plugged it in for charge and then when i took it off and tryed to turn it on it would not turn on it just comes up with the samsung galaxy note n7000 logo and when i press the 3 button combo it comes with WARNING!! a custom os can cause crictical blah blah and press volume up to contine and down to restart it's not coming with android recovery?
I would heavily appreciate any help as this is my daily driver!
Thanks
Download mode is Volume DOWN + Home + Power
Recovery mode is Volume UP + Home + Power
Make sure you are doing the right combination.
azzledazzle said:
Download mode is Volume DOWN + Home + Power
Recovery mode is Volume UP + Home + Power
Make sure you are doing the right combination.
Click to expand...
Click to collapse
Oh ****. Yeah i got it wrong lol Thanks for that mate!
right i've done it right this time and i wiped cache partition and davlik cache but it is still stuck on the galaxy note logo. help?
were you on ICS or GB ??
Id suggest to try and flash stock GB via ODIN, and if it still fails to boot, send it off for repair to Samsung
Flash any gb stock rom via odin...
Sent from my GT-N7000 using XDA Premium App
I'm on ICS and it's the official version i'd rather not send it to samsung as it is rooted but how do i flash a new rom with odin any main steps or tuts?
Thanks for replying!
http://forum.xda-developers.com/showthread.php?t=1424997
Download ICS from there, As well as odin, Load all files into odin and connect phone in Download mode, Hit start and job done
azzledazzle said:
http://forum.xda-developers.com/showthread.php?t=1424997
Download ICS from there, As well as odin, Load all files into odin and connect phone in Download mode, Hit start and job done
Click to expand...
Click to collapse
Thank your very much. I'm Downloading now, i'll post back how i get on!
azzledazzle said:
http://forum.xda-developers.com/showthread.php?t=1424997
Download ICS from there, As well as odin, Load all files into odin and connect phone in Download mode, Hit start and job done
Click to expand...
Click to collapse
Sorry for being such a noob but i have downloaded both files and connected phone with laptop and odin where do i load the file that i have downloaded?
if it is one single file then it will go into the PDA section. If it comes in 3 files it will go in the respective section, i.e PDA, Phone, CSC.
do not select pit or repartition
azzledazzle said:
if it is one single file then it will go into the PDA section. If it comes in 3 files it will go in the respective section, i.e PDA, Phone, CSC.
do not select pit or repartition
Click to expand...
Click to collapse
It's a ZIP file and PDA requires a .tar file?
open it up There will be a .tar file inside it, Extract it and then load it into odin
I would highly recommend to flash Stock GB rom. Root it and flash any custom rom you want to..
You can find all GB stock Roms here :-
http://forum.xda-developers.com/showthread.php?t=1424997
How to install :-
Check here :- http://forum.xda-developers.com/showthread.php?t=1329360
Hope it helps.....
azzledazzle said:
open it up There will be a .tar file inside it, Extract it and then load it into odin
Click to expand...
Click to collapse
:silly: me!
done it now it's installing Thanks you very much people! appreciate your help!
Hi all,
firstly I would like to mention that I know that there are a lot of tutorials how to do this..but..I currently can't find the instructions to the latest "stock ROM" (I think its JW6 - if I am not correct feel free to correct me) root..
I would like to know these things:
1) How to root mentioned phone with this ROM?
2) I am not pretty sure but with my HTC WildFire S I didn't need to flash "kernel"? What it is and am I right that i need to flash it?
3) Will I have recovery (like CWM, ..) right after root or will I need to make some more to get recovery?
Sorry for posting this kind of answers - I think that they are already answered but I am little "confused" from information which I get from the internet.. I have already rooted and flashed custom ROM to my HTC WildFire S but with Samsung it looks for me quite "strange" and I really don't know what to do and I also don't want to end up with broken phone..
Thx all which will help me
First you need to download Odin and the Samsung USB driver.
Then download the root file from here. Search for JW4 since there is no root file for JW6. JW4 will work just fine.
Unpack the root file you downloaded.
Boot your device into Download mode by holding down the volume down + home + power buttons.
Open Odin and click AP. Then select the root file (.tar) you downloaded.
Connect your device to the computer and click Start (Make sure re-partition is not checked).
That's it.
Yes you will have CWM Recovery. To boot into CWM Recovery hold down the volume up + home + power buttons.
Hope this helps.
Guys, last compatible version of Odin for i9000 was 1.83, period.
Use JVU or JVZ as only those contain the bootloader you need for any 4.x custom ROM, no other Gingerbread firmware contains it.
@KoFiler on HTC you needed just a custom recovery. Here is the same, but as the recovery can not be flashed on i9000 separately, the package "zImage" contains also the kernel. So you must find a custom kernel that matches the firmware and flash it with Odin to get the custom recovery in package.
tetakpatalked from N7100