Related
HELLO,
this is a port of the codename android rom found here
put into jokersax cm9 found here
brought to you by:
TEAM MOTO TEGRA
INSTRUCTIONS:
fresh install:
format system, data, cache
flash rom, flash rom, flash gapps
fix permissions and reboot phone
trouble installing using that method? try using this one found here
* no kernels have been tested flashing one is at your own risk
* if you run into a few fc's go into recovery wipe dalvick cache and fix permissions then reboot phone
current build: based on jokers cm9 6.1 and CNA rc2 release via twitter 5/12/2012
CODENAME ANDROID LINK
released on 5/13/2012
if can't use jokers site go here
goo-inside.me devs/spleef/atrix
*Please report any and everything i do not own an atrix so i am counting on the atrix community to test these build and let me know what needs fixing...thanks
MAJOR THANKS TO QBKING77 FOR HIS INSTALL AND REVIEW VIDEOS!!!!
{ note these videos are of the photon }
qbking77 youtube channel: http://www.youtube.com/user/qbking77/featured
*How to install:
http://www.youtube.com/watch?v=ZZvVQ7GpDFg
*Review:
http://www.youtube.com/watch?v=Db_7oyfX2w0
reserved
reserved ...
camera
does the video camera work??? and i am using cm7 neutrino can i flash this over it
abdussamad said:
does the video camera work??? and i am using cm7 neutrino can i flash this over it
Click to expand...
Click to collapse
No, as has been loud and clear for a very long time, and we wont do until proper ics libs have been released
abdussamad said:
does the video camera work??? and i am using cm7 neutrino can i flash this over it
Click to expand...
Click to collapse
no video does not work it is an ics rom and all ics roms have bugyy/no video without the use of a market app
to flash this you will have to fully wipe coming from any rom except for cna
Installed but forgot to fix permissions and couldn't get passed boot animation.
Trying again
---------- Post added at 06:57 PM ---------- Previous post was at 06:55 PM ----------
Nope.
Still stuck at boot animation.
Gonna try new AOKPCB and report.
ATRIXXIRTA said:
Installed but forgot to fix permissions and couldn't get passed boot animation.
Trying again
---------- Post added at 06:57 PM ---------- Previous post was at 06:55 PM ----------
Nope.
Still stuck at boot animation.
Gonna try new AOKPCB and report.
Click to expand...
Click to collapse
k going to try to swap in a few things see if that works will edit when reuped
Sounds good.
New AOKPCB is working awesome!! So far at least.
Sooo happy to have wifi back!! lol. Latest MiUi didn't have wifi for me.
Nice to see the themes there too.
How exactly do I go about themeing this badboy?
ATRIXXIRTA said:
Sounds good.
New AOKPCB is working awesome!! So far at least.
Sooo happy to have wifi back!! lol. Latest MiUi didn't have wifi for me.
Nice to see the themes there too.
How exactly do I go about themeing this badboy?
Click to expand...
Click to collapse
that im afraid to tell you is going to be a trial and error bit make a backup first off
then can search in google for aokp/cm9 themes or even ehre on xda and whichever ones come up make sure it fits your phone hdpi/mdpi and so on
also new cna is up again i think i used the wrong runtime it was the aokp runtime not the cna should at least boot now
You developers really need to take a break or vacation. Can't keep up with these ROMs.
Sent from my MB860 using XDA
What boot animation is supposed to be with CNA?
When I tried it before I had the AOKP Team Kang unicorn boot animation.
Was that something to do with that or is that the normal boot animation for CNA now?
Deggy said:
You developers really need to take a break or vacation. Can't keep up with these ROMs.
Sent from my MB860 using XDA
Click to expand...
Click to collapse
lol...yeah i hear ya once i get them going right wont be as many updates maybe one a week...but as long as i get reports of it dont boot or cam not working or bt sends to reboot or any type of issue ill keep tweaking and changing things around until we find the sweet spot like ive got for aokp/aokpcb last twp releases on them (as far as i know) have been running great
gummy as far as i know working good
cna only problem child as of now but hopefully the reup i just did resolves that
ATRIXXIRTA said:
What boot animation is supposed to be with CNA?
When I tried it before I had the AOKP Team Kang unicorn boot animation.
Was that something to do with that or is that the normal boot animation for CNA now?
Click to expand...
Click to collapse
nope not normal cna animation is the stock nexus animation with all the colors square flowing in and out
aokp is the pink unicorn
aokpcb is the old nintendo looking start screen
gummy the fying poptart
went ahead and readded the media files/folder just to be sure its got the right animation am reupping it but its in que behind another aokpcb release...lol they reuped after i downed
their release so like i always do they update i update will ring the dinner bell when its ready
k new cna is up again
Got to the boot animation but no further. Format, flash, flash, gapps and fix permissions. Then tried data we but no go.
Sent from my MB860 using xda premium
What boot animation did you get? just curious
Nexus. I came from AOKPCB with video game animation.
Sent from my MB860 using xda premium
Tablet Mod for CNA is UP on
www.Jokersax.com
Under Mods section by Th3Bill
Personally tested it
Yup me too. No boot with the team kang animation.
new cna posted this morning same name same link let me know how it goes
Everyone is in love with AOKP and some of the other ROMs and kernels around here, but I didn't want or need everything that was added in to them. So, being that Android is open source, I decided to make my own. If you love a lot of customization, pull down toggles, and having everything (kitchen sink included), then this probably isn't going to be the combination for you, so you can save yourself some time and just look elsewhere. My ROM is close to stock AOSP, with a few extras added in that I wanted to help with usability without being over the top. If you like the stock JB experience, but feel that it's missing just a little bit, then this combination may be for you.
To go with the ROM, I put together a mostly stock kernel as well. The kernel is based on the same source as the CM10 kernel, but I've added in a few items and removed stuff that isn't really needed for most users. The GApps are also packaged in, so only one package to flash to get everything you want.
ROM Features
Built from 4.1.2 source
Linaro Toolchain, -O3, & strict-aliasing
Reboot Options
su and Superuser
"Accurate" Battery mod and Smooth Charging
See Github for the other changes made
Downloads
P3100 - MD5 - Alpha
P3110 - MD5
P3113 - MD5
Thanks
codeworkx & Team Hacksung because AOSP wouldn't really be functional without him
Rootzwiki for the new computer. There is no way I would have attempted this with my old computer
AOKP/RootzBoat/CM10 as this is where the few changes I did make primarily came from
TSM just cause they're that awesome
If you like the work, I'd appreciate anything to help support hosting and Github costs if you could
Changelog
9/24
Initial Release
10/1
Pull-down toggles
Launcher2 now obeys the system auto-rotate preference
Set the external SD Card to be external storage and internal SD Card to be secondary storage.
10/19
Updated Google Apps
Updated to 4.1.2
Switched from Launcher2 to Trebuchet
Increased time required to disable touch on screen due to the "water detection" feature change didn't work
Few framework changes from CM10
10/23
Revert back to Launcher2
Change in how the kernel boots, see Github for details
10/24
Initial release for P511X
Fix layout in Settings.apk
10/28
Fixed a couple device asserts to prevent problems with flashing
To Do:
Implement pull-down toggles
Upload device tree to Github
Build for remaining P31xx and P51xx devices
Known Issues:
IR Blaster doesn't work, just like every other AOSP build
gpsd sometimes has some problems, but still works fine for getting location. UPDATE: Still trying to fix this as of 10/19. I've tried many things to get it working, but nothing seems to want to work. If I find a fix, I'll be sure to inform everyone.
Mobile network doesn't work for P3100, waiting for logcat/dmesg info before I can even attempt to fix it
can i flash dis on my iphone 3gs?
nitsuj17 said:
can i flash dis on my iphone 3gs?
Click to expand...
Click to collapse
http://ragefaces.s3.amazonaws.com/503e27e2ae7c700dcb000008/kidding-me.png
nitsuj17 said:
can i flash dis on my iphone 3gs?
Click to expand...
Click to collapse
Yes, but you'll loose the functionality of Google Now. Same with the iPhone 4. Google Now works on the 4S and 5, but Google Maps will fail to load on all iPhone models.
In other news, I've been using this for a day, so I've tested most of the major items, but there is surely stuff I haven't done or tried yet, so please report any bugs or issues and I'll attempt to fix them.
cant wait to try this out
what about mic ? is that work in this build?
joinx said:
what about mic ? is that work in this build?
Click to expand...
Click to collapse
It's not the samsung release. The mic work perfectly
Very Thankful
I am very thankful for this,I have 2 kids and each has a tab2 p3113 and they love this with no hangups,Thanks again,,anything that keeps them happy keeps me happy,LOL,anyway it is very smooth in what time I have had it loaded on both.....thanks imnuts
gabriel1997 said:
http://ragefaces.s3.amazonaws.com/503e27e2ae7c700dcb000008/kidding-me.png
Click to expand...
Click to collapse
All I can say to that post is
"YESSSSS!"
Toooooo funny.
Mic worked fine for me when I recorded a quick video to make sure it worked. And I'm glad at least one person has tested it out, as I was beginning to wonder if people were viewing the thread and downloading just for fun.
imnuts said:
To Do:
Implement pull-down toggles
Upload device tree to Github
Build for remaining P31xx and P51xx devices
Known Issues:
IR Blaster doesn't work, just like every other AOSP build
Click to expand...
Click to collapse
linaro.....nice
Sent from my GT-P3113 using Tapatalk 2
imnuts said:
Mic worked fine for me when I recorded a quick video to make sure it worked. And I'm glad at least one person has tested it out, as I was beginning to wonder if people were viewing the thread and downloading just for fun.
Click to expand...
Click to collapse
ok then i try to flash it now
Seems that while GPS still works for me, it is having issues and causing battery drain by randomly coming on trying to find my position. Not sure if this is from an app I have installed or not. Has anyone that has flashed it had an issue?
Also, I believe I almost have the pull-down toggles merged in. The next update will have them, and possibly fix the GPS issue if I can find where it is. Once that is settled, I'll build for P3110 and P3100 to try and get them working, and finally, build for the P51xx models.
Updated the OP with a new build, change log is in the second post
thanks
P-nut aka nutpn says thanks ButterNutz, putting on both my kids tab 2
Looking forward to P3110 build!! :good:
---------- Post added at 04:26 PM ---------- Previous post was at 04:12 PM ----------
To be honest could I just use build prop editor to change model number etc to P3110??
Would there be that much difference in your P3110 build?
It seems to run absolutely fine on my P3110 so far
---------- Post added at 04:33 PM ---------- Previous post was at 04:26 PM ----------
This is a simpler and, in my opinion, much better alternative to CM10
matthewgwilt said:
Looking forward to P3110 build!! :good:
---------- Post added at 04:26 PM ---------- Previous post was at 04:12 PM ----------
To be honest could I just use build prop editor to change model number etc to P3110??
Would there be that much difference in your P3110 build?
It seems to run absolutely fine on my P3110 so far
---------- Post added at 04:33 PM ---------- Previous post was at 04:26 PM ----------
This is a simpler and, in my opinion, much better alternative to CM10
Click to expand...
Click to collapse
I think the only difference between P3110 and P3113 is the IR Blaster, which doesn't work anyway, so I'm thinking that it should work fine, as you found, without any real quirks. I will hopefully be finished with another project I'm working on soon, so I'll be able to put all of my P3113 changes into P3110 and P3100 and build for them then too.
Also, glad to see some more feedback and other people using the ROM. Glad people like it thus far.
imnuts said:
I think the only difference between P3110 and P3113 is the IR Blaster, which doesn't work anyway, so I'm thinking that it should work fine, as you found, without any real quirks. I will hopefully be finished with another project I'm working on soon, so I'll be able to put all of my P3113 changes into P3110 and P3100 and build for them then too.
Also, glad to see some more feedback and other people using the ROM. Glad people like it thus far.
Click to expand...
Click to collapse
It really is awesome... my only moan is the GPS issue.. any progress on that?
I've tried a few things to try and improve the GPS but haven't succeeded
Network location as a whole seems to be dead
Thanks again!
Nice work, sir! Have tried all other ROMs, and came back th this one as a dd. I do not use, nor would I like to feel the need to use, a 3rd party launcher app. Will watch for any other issues I have not listed and report back.
The original link:http://bbs.mfunz.com/thread-753138-1-1.html
Martincz:
Has generated by the edition before the code improvements, new features and new to the impatient for A4G boring ROM oil early adopters.
Continue to wait for the new kernel, other aspects are ready.
0930:
Sync the latest MOKEE‘s code
Fixed some issues
Sync last kernel code
The Final Version download: http://pan.baidu.com/s/1FtGqH
google service pack:http://pan.baidu.com/share/link?shar...&uk=1160557519
Require: Unlock
Features:
HALO
PIE control
Access manager
Desktop thumbnail
Name the custom operators
Music timing closure
Group messaging contacts
Task switching the sidebar (as long as you have installed support program, it will show more and more icon, you can quickly call)
and more
Change log:http://www.mfunz.com/change-log/
Screenshot:
This is based on the 3.1.10 kernel and what is unique about this ROM, what makes this ROM different?
Also, any mirrors?
hi zangmo, can you say what is new in the kernel ...
coz i see the screenshot says june 27 2013... and it is today..
any new updates regarding the kernel??
:fingers-crossed::fingers-crossed::fingers-crossed:
Someone tested this new rom?
ajayfreezer said:
hi zangmo, can you say what is new in the kernel ...
coz i see the screenshot says june 27 2013... and it is today..
any new updates regarding the kernel??
:fingers-crossed::fingers-crossed::fingers-crossed:
Click to expand...
Click to collapse
YES,build date is june 27
BUT,It's sync Kristianp‘s code
If the code is released by then, we will have the same problem of battery consumption high, right? Do not have the flash of the camera, right? Thus, the kernel is now compiled the same as we have in the CM9 and CM10.1 ePinter. Am I wrong?
Rom nifty. Legal purposes. But these bugs detected so far, except the drums.
- Flash does not work;
- Radio is not recognized, or without communication;
- Keyboard does not work.
I would like to give it a try if it is in english..
:highfive:
ajayfreezer said:
I would like to give it a try if it is in english..
:highfive:
Click to expand...
Click to collapse
When you install the ROM on your device, you must install the GAPPS also use the version used in the ROM ePinter. With it, you can select the language on the first start. I used it and selected Portuguese-Brazil quietly. only problem is that radio will not work.
petersonldp said:
When you install the ROM on your device, you must install the GAPPS also use the version used in the ROM ePinter. With it, you can select the language on the first start. I used it and selected Portuguese-Brazil quietly. only problem is that radio will not work.
Click to expand...
Click to collapse
try it .
Thanks for this. Good work will Test later.
---------- Post added at 10:29 PM ---------- Previous post was at 10:06 PM ----------
I'm downloading now, but it is very slow. I will try to reupload to mega as soon as possible.
With the radio suggested, can make phone calls and even use bluetooth, but unfortunately it does not work the wi-fi, which to me, is paramount. So I can not test it for longer. Another thing, from what I saw on the battery widget pro, battery consumption dropped significantly. Any other user who test the rom, please, put your impression.
atrix4g18 said:
Thanks for this. Good work will Test later.
---------- Post added at 10:29 PM ---------- Previous post was at 10:06 PM ----------
I'm downloading now, but it is very slow. I will try to reupload to mega as soon as possible.
Click to expand...
Click to collapse
download it http://pan.baidu.com/share/link?shareid=3053114321&uk=907618231
it fixed Wi-Fi and Setting FC
petersonldp said:
With the radio suggested, can make phone calls and even use bluetooth, but unfortunately it does not work the wi-fi, which to me, is paramount. So I can not test it for longer. Another thing, from what I saw on the battery widget pro, battery consumption dropped significantly. Any other user who test the rom, please, put your impression.
Click to expand...
Click to collapse
Right, I know it .
Mfunz member :坏坏的邓国勇 fixed it
http://pan.baidu.com/share/link?shareid=3053114321&uk=907618231
ZangMo said:
Right, I know it .
Mfunz member :坏坏的邓国勇 fixed it
http://pan.baidu.com/share/link?shareid=3053114321&uk=907618231
Click to expand...
Click to collapse
Thank you. Now a question. Why do I only use the radio to put the link? Is it okay to use or 01.100.00R 01.7738P? Flash comes in when you want autofocus, kkk
Young, if not too much to ask, please, list the features of this rom, especially regarding the kernel, visited the site where you got the rom and have not seen much. I'll be very grateful if you give this attention. Thank you.
petersonldp said:
Thank you. Now a question. Why do I only use the radio to put the link? Is it okay to use or 01.100.00R 01.7738P? Flash comes in when you want autofocus, kkk: D
Click to expand...
Click to collapse
sorry,this is the first public beta.
Martincz say he is waiting for the new kernel code synchronization, some problem is the kernel problem caused.
so, we must waiting for Krystianp's code sync.
YES,I noticed this. PLZ waiting some minutes
I'm glad to see the devs in China working on this!
Hopefully the code is made public soon.
rom details
:cyclops: so far using this rom:
this rom is most similar to avatar rom except ...it uses mokee launcher and additional xperia launcher
the aosp keyboard has been fixed.
the front camera doesn't work as usual and no flash
some added tweaks and animations in setings
new shortcuts in recent apps taskmanager .... screenshots below
wifi and data works fine for me...
have new chinese market..
permission manager in settings
some breathing features for sms and missed call :cyclops:
PIE control which i dont know what it is ??
will post more about this in further use :highfive:
hey ZangMo,
I see 24th june build date of kernel...but your screenshots display 27th june...
is it correct or I downloaded wrong file??
ajayfreezer said:
hey ZangMo,
I see 24th june build date of kernel...but your screenshots display 27th june...
is it correct or I downloaded wrong file??
Click to expand...
Click to collapse
the first beta is Martincz's build (June 27) two download link is correct
SlimRoms is a custom android operating system. The main goal is to offer users a slimmed down but still feature rich alternative to other android operating systems.
The entire SlimTeam work together to bring you this tailor-made beauty straight from Android Open Source Project (AOSP) source code.
All of the sources can be publicly viewed through GitHub and you can stop by the public Gerrit to submit patches of any type.
SlimKat is the project name for SlimRoms based on Android 4.4 and offers the following original features:
The Real Dark Slim
Full system-wide dark interfaces. - If you like it smooth and classy.
Custom Shortcuts. Everywhere.
Hardware keys, Navigation Ring, Navigation Bar, Lockscreen, Tiles, Notifications etc. - We've got you covered.
System-Wide Keyboard Controls
Rotation, cursor control, optional emoticions, etc. - You'll be tapping away to your heart's content.
SlimCenter
Downloads, contact information, system app removal. - More fun than you can shake a stick at.
Camera Features
Trueview, Smart Capture. - Capture life moments with ease.
Important links:
slimroms.net - The official webpage where you find everything you need to know about SlimRoms.
Downloads - Download the rom, gapps and other addons.
Installation instructions - Follow these steps to the letter if you're about to install SlimRoms on your device.
Latest Changelog - Read here if you want information on changes in latest build.
FAQ - The most frequent asked questions with answers.
Kernel Source - The source of your device's kernel.
Get in touch! - Contact SlimRoms at these places if you have questions, requests or feedback.
Google+
Twitter
Facebook
Forum
Disclaimer: SlimRoms are not responsible for any damages to your device.
XDA:DevDB Information
SlimRoms, ROM for the Motorola Droid RAZR HD
Contributors
darkspadez, SlimRoms
Version Information
Status: Testing
Created 2014-07-01
Last Updated 2014-07-01
Reserved For Future use
Also Reserved
Wow this is great. I hope someone port this to atrix hd.
---------- Post added at 01:59 AM ---------- Previous post was at 01:51 AM ----------
Which of these models is gsm so i can try flashing this on atrix hd?
Awesome awesome!! Been waiting in anticipation for this will try as soon as possible!
EDIT: Ok, I have only had limited time to test. But briefly put things looks promising here:
Installed without any problems (using latest TWRP in my case).The same bugs that exist in CM 11 are also present here, which is it to be expected (e.g. broken video playback). This is perfectly natural for such an early release and no doubt these will get sorted out as development progress. I am glad to try out this early build. For an alpha it seems very stable and definitely looks promising! I initially tried the official Slim Gapps (as linked to). They seemed fine. Since then I have installed ART compatible Gapps from the CM thread (13/11 i believe). Now running in ART runtime mode. Yes this does introduce some problems and not all apps are compatible, however from my experience ART also introduce a previously unseen level of smoothness. Will continue to use this the next days and of cause eagerly follow development.
@darkspadez (and all other other involved devs of cause): Congrazt on this first public SlimKat build for our phones!
Sent from my XT925 using Tapatalk
SVLAN said:
Wow this is great. I hope someone port this to atrix hd.
---------- Post added at 01:59 AM ---------- Previous post was at 01:51 AM ----------
Which of these models is gsm so i can try flashing this on atrix hd?
Click to expand...
Click to collapse
925 is GSM.
help
I would love to try this ROM but can't seem to get my cmw recovery updated I down loaded the zip mentioned correct version thru ROMmanager and flashed it . But when I go to cmw recovery it still shows older version. Tried flashing it with that but gives me the dead android. Have to restore
DizzyFox said:
I would love to try this ROM but can't seem to get my cmw recovery updated I down loaded the zip mentioned correct version thru ROMmanager and flashed it . But when I go to cmw recovery it still shows older version. Tried flashing it with that but gives me the dead android. Have to restore
Click to expand...
Click to collapse
I am using latest twrp recovery found here in the RAZR development forum. I can't say if this the best option though. I can only say that in my case it worked fine (install, backup and restore).
I'm one of the devices running the buggy EMMC.
Error is the same as all the others (I wish there were a kernel fix for it):
set_metadata_recursive: some changes failed
Back to the drawing board...
DizzyFox said:
I would love to try this ROM but can't seem to get my cmw recovery updated I down loaded the zip mentioned correct version thru ROMmanager and flashed it . But when I go to cmw recovery it still shows older version. Tried flashing it with that but gives me the dead android. Have to restore
Click to expand...
Click to collapse
I was flashing fine with cwm 6.0.3.6 for the epinter build. I did finally update, but I had to use a .bat file in conjunction with a special fastboot.exe file to actually upgrade the recovery, because otherwise it would just fail to upload. I was having backup issues with TWRP, so I just stick with CWM now. Haven't had any issues. If you want to try that .bat .exe combo I found, let me know.
projekt8e said:
I was flashing fine with cwm 6.0.3.6 for the epinter build. I did finally update, but I had to use a .bat file in conjunction with a special fastboot.exe file to actually upgrade the recovery, because otherwise it would just fail to upload. I was having backup issues with TWRP, so I just stick with CWM now. Haven't had any issues. If you want to try that .bat .exe combo I found, let me know.
Click to expand...
Click to collapse
I was wanting to keep cmw also but can't figure out how to install or flash the new version that this ROM requires.
DizzyFox said:
I was wanting to keep cmw also but can't figure out how to install or flash the new version that this ROM requires.
Click to expand...
Click to collapse
I just flashed the CWM this morning via fastboot and everything went fine. Have you tried that way?
Sent from my XT925 using Tapatalk
I was expecting to read about the ROM, but only see comments about recoveries. Any comments on the ROM? Video recording/playback is working?
Working great on atrix hd other then i get no signal. Everything else seen to work. I also had to edit the build.prop to change the resolution to 320 so it doesn't look so small on my atrix hd
SVLAN said:
Working great on atrix hd other then i get no signal. Everything else seen to work. I also had to edit the build.prop to change the resolution to 320 so it doesn't look so small on my atrix hd
Click to expand...
Click to collapse
What kind of video playback works for you? YouTube? MX Player with S/W decoding?
So far yt and netflix
SVLAN said:
So far yt and netflix
Click to expand...
Click to collapse
Wonder when this was commited to compile. I see a bunch of changes related to this in the gerrit and wonder if CM11 will be getting this tonight as well.
Yeah I wonder the same as well. Maybe @skeevydude be able to fix few things with these commits for aosp 4.4
SVLAN said:
Yeah I wonder the same as well. Maybe @skeevydude be able to fix few things with these commits for aosp 4.4
Click to expand...
Click to collapse
Do you have any print services in Settings?
Spidinator said:
I just flashed the CWM this morning via fastboot and everything went fine. Have you tried that way?
Sent from my XT925 using Tapatalk
Click to expand...
Click to collapse
I must not have my PC set right. I get my phone in fastboot but when I try to open fastboot it just blinks and disappears. I may just have to try putting trwp on my phone. Thanks you are all a great bunch of gentlemen
warning installing this on your device is at your own risk!!!!, this is an early stage port by a noob(aka FIRST EVER PORT.....) i take no credit for the work thats been done by our cm 11 team or the port to make this port possible. im simply just learning to port for our device and adding some flavour and spice to our device!!
what is it?
paranoid kitkat 4.4.4 (as far as i know its working for SM-T210/R)
what roms did i use for this port? (May change during source build)
CM11= http://http://forum.xda-developers.com/showthread.php?t=2783617
PORTED ROM= http://http://forum.xda-developers.com/galaxy-tab-3/development/rom-pac-rom-t310-t2855823
what future development will be done with this rom?
(WIP) -kernel overhaul from my own kernel build ( just borrowing gr8nole's work till i figure out some issues in my own kernel)
(WIP) -source re-build (fixing some rom issues im having)
(WIP) -new theme/layout of PA
(WIP) -adding more features to the build
the big question, whats broke?/working?
you tell me..... most things should be working that is working in our cm build beta 3 ( i hope) and a few more things broken from the port rom check out both rom pages (^^^^^^^posted above^^^^^^) for more info on whats working/whats broke before posting here please! DO NOT INSTALL THINKING ITS A DAILY USE ROM!!!!
i am taking (dev) advice where ever i can get it to improve the rom/port and re-build from scratch
like i said this is my first port so be nice.... I'm learning from piles of half built/outdated tutorials on my free time.
thanks out to all who got our device this far and lets hope it grows from here!! All thanks goes to the Rom base and port devs above and everyone in between because I'm just a casual trying to learn.
(WIP) - THIS IS A TEST PORT ONLY!!! NOT BY ANY MEANS A FINAL OR EVEN A BETA PRODUCT !!!!!!!
Download link
http://d-h.st/R25
XDA:DevDB Information
paranoid android sm-t210r , ROM for the Samsung Galaxy Tab 3 7.0
Contributors
wait4me2burn
ROM OS Version: 4.4.x KitKat
ROM Kernel: Linux 3.4.x
Version Information
Status: Testing
Created 2014-09-06
Last Updated 2017-12-09
reserved 1
one more to be safe.....
Downloading
Sent from my SM-T210R using XDA Free mobile app
Link not working
svicenty said:
Link not working
Click to expand...
Click to collapse
Clicked the "DOWNLOAD", keep trying and close the ads, always happens to me
---------- Post added at 08:17 AM ---------- Previous post was at 08:14 AM ----------
Post Kernel sources
HerroYou said:
Clicked the "DOWNLOAD", keep trying and close the ads, always happens to me
---------- Post added at 08:17 AM ---------- Previous post was at 08:14 AM ----------
Post Kernel sources
Click to expand...
Click to collapse
I also uploaded it directly to xda if you click download on the tabs above the Rom along with the direct link.
And as of right now its nothing more then the port itself just the files of the two roms cut and paste working .....like I said its a port in progress.
It's still mostly pa framework riding on our cm devs kernel..... the kernel source is still the kernel of cm 11. I'm having issues compiling a working kernel (my first kernel project) once I have a stable working kernel ill upload if I figure it out.....
svicenty said:
Link not working
Click to expand...
Click to collapse
they both seem to be working to me..... if the link isn't working click the download tab above the op I know its working both are just downloaded from both.....
could not flash
had problems flashing. recovery said error with the update script binary so it couldn't flash the rom. should I change recovery to see if that helps I have twrp recovery..
edit: got it working with phils touch recovery but as soon as it starts up ui crashes and it doesn't seem to want to wake up or screen shuts off
wait4me2burn said:
reserved 1
Click to expand...
Click to collapse
I the rom description, it says t210r only. It will also run on t210.
DevMyAndroid said:
I the rom description, it says t210r only. It will also run on t210.
Click to expand...
Click to collapse
Yes it will
315phatboi said:
had problems flashing. recovery said error with the update script binary so it couldn't flash the rom. should I change recovery to see if that helps I have twrp recovery..
edit: got it working with phils touch recovery but as soon as it starts up ui crashes and it doesn't seem to want to wake up or screen shuts off
Click to expand...
Click to collapse
Needs the latest recovery in order to boot. A clean wipe probably wouldn't hurt. Most of the vendor drivers are not working like in the cm build, so its slow working and laggy..... I'm away for the weekend so if I do any work it will be from my tablet. Going to try to start the kernel build this week when I get home.hopefully have my own device tree/kernel up this week....build permitting...
DevMyAndroid said:
In the rom description, it says t210r only. It will also run on t210.
Click to expand...
Click to collapse
good news will change the op. ill try my best to keep both as this build forks from the cm source. Tho most of the work will be aimed at the 210R as its the device I own.
Many Thanks!
Hey I just tried this port on my galaxy tab 3. The only bugs I had with it is:
1. No Setup Wizard
2. Very slow and laggy
3.Wifi does not work no matter what
Anyways many thanks for this rom and I believe that once laufersteffenwolf recovers he will try to fix the bugs on these type of roms!
Anyways again many thanks I can't tell you how proud i am for you Rom Developers
testers
Cant do much either im a noob but if u would like testers im here
just saying
Hey buddy, thanks for trying this
Very excited for PA in this tab.
If you need any help, just ask
Tried it kinda slow but its a begin
Verstuurd vanaf mijn SM-G900F met Tapatalk
I'll try working on this a bit...
Sent from my Venue 8 Pro 5830 using Tapatalk
Lincoln99 said:
I'll try working on this a bit...
Click to expand...
Click to collapse
feel free to add/fix whatever you see fit and ill add it to the rom!
(any help is help)
i posted this port and havent had time lately to get to core broken features/ problems with it besides a few tweaks due to worklife, but have been picking at it when i have had time.
planing a theme update with some of the system tweaks/issue fixes sometime this month with the kernel i just built. hoping to have a link up for it this week after some more testing cycle is done to it.
Hello. I tried your rom.
Well, WiFi and BT aren't working. It's laggy and the Documents always crashes.
wait4me2burn said:
feel free to add/fix whatever you see fit and ill add it to the rom!
(any help is help)
i posted this port and havent had time lately to get to core broken features/ problems with it besides a few tweaks due to worklife, but have been picking at it when i have had time.
planing a theme update with some of the system tweaks/issue fixes sometime this month with the kernel i just built. hoping to have a link up for it this week after some more testing cycle is done to it.
Click to expand...
Click to collapse
Unfortunately I haven't had time to work on this, however, I may have some time this week. And @gr8nole got hwcomposer working in CM11, so I may try fixing that.
Sent from my SPH-D710 using XDA Premium 4 mobile app