miniCm9 3.0.3 not booting..... - XPERIA X8 Q&A, Help & Troubleshooting

Hi,
I just recently unlocked my bootloader and attempted to flash the nAa-ics-004 kernal on my X8.
After booting into ClockworkMod Recovery I wiped and flashed MiniCm9 3.0.3.
Now when I boot, I get stuck on the "nAa" screen and the logo keeps repeating itself but I can still press back to get into recovery.
So how can I boot into minicm9 now?
Ummmm.... help would be nice.
EDIT: I'm a noob, I unlocked with X8Toolbox, flashed with flashtool but flashtool only said "loader.sin is flashing" or whatever it says, should it say both? I did select both loader.sin and kernal.sin using SHIFT.

Yharooer said:
Hi,
I just recently unlocked my bootloader and attempted to flash the nAa-ics-004 kernal on my X8.
After booting into ClockworkMod Recovery I wiped and flashed MiniCm9 3.0.3.
Now when I boot, I get stuck on the "nAa" screen and the logo keeps repeating itself but I can still press back to get into recovery.
So how can I boot into minicm9 now?
Ummmm.... help would be nice.
Click to expand...
Click to collapse
are u using nAa ics kernel or reflash nAa kernel

It says "2.6.29.6-nAa-ics-C..." but the rest goes off the screen.
I think I flashed the ics nAa.

Yharooer said:
It says "2.6.29.6-nAa-ics-C..." but the rest goes off the screen.
I think I flashed the ics nAa.
Click to expand...
Click to collapse
is your baseband 15

Yharooer said:
It says "2.6.29.6-nAa-ics-C..." but the rest goes off the screen.
I think I flashed the ics nAa.
Click to expand...
Click to collapse
Reflash the ics kernal..Download here http://forum.xda-developers.com/showthread.php?p=24304432
Turn on your device..wait for 3-5min..
Make sure u flash the gapps for ics

Yharooer said:
Hi,
I just recently unlocked my bootloader and attempted to flash the nAa-ics-004 kernal on my X8.
After booting into ClockworkMod Recovery I wiped and flashed MiniCm9 3.0.3.
Now when I boot, I get stuck on the "nAa" screen and the logo keeps repeating itself but I can still press back to get into recovery.
So how can I boot into minicm9 now?
Ummmm.... help would be nice.
EDIT: I'm a noob, I unlocked with X8Toolbox, flashed with flashtool but flashtool only said "loader.sin is flashing" or whatever it says, should it say both? I did select both loader.sin and kernal.sin using SHIFT.
Click to expand...
Click to collapse
If install finished was there install satus 0?

fotak-x said:
is your baseband 15
Click to expand...
Click to collapse
Right now I'm not at my computer but I think that may be the reason why.
Ummm... If you don't mind how do I upgrade, (preferably only thru flash mode only)
Any help would be much appreciated

Yharooer said:
Right now I'm not at my computer but I think that may be the reason why.
Ummm... If you don't mind how do I upgrade, (preferably only thru flash mode only)
Any help would be much appreciated
Click to expand...
Click to collapse
okay
1. first check your baseband is xxx015 (if not, you can find the baseband from B.jay folder and flash it!)
2. Root your phone
- with flash tool by clicking the padlock icon
OR
- copy these files (password=cintaindonesia) and extract on your SDcard, copy paste to system\bin with rootexplorer
4. then unlock bootloader by s1tool or flashtool (NOT FOR 11w29+ !!!)
5. flash the latest ICS kernel
6. backup
7. factory reset, wipe data, etc
8. flash the ROM
9. Done!

Thanks!
Thanks alot guys for your help! I now got MiniCM9 working! Thanks once again.

Yharooer said:
Thanks alot guys for your help! I now got MiniCM9 working! Thanks once again.
Click to expand...
Click to collapse
your'e welcome dude!
nice!

Related

stuck on Splash screen!

Hello, im helping a friend root he's phone.
He is stuck at the "Sony Ericson screen"
This is what we have done so far:
- install superuser/bussybox
- Custom recovery (CWM)
He then went into CWM and clicked:
- backup nandroid
- delete dalvik cache
- reset factory
- install zip from sdcard: Presto ... install it...... . .. . .
- Restart phone.
it gave me an error "bad restore can't restart" then It automaticly jumped to another submenu "no" "-yes -- restore CWN" underneath a warning: may not able to access the restore" I clicked yes and it restarted but never got further then booting
xologist said:
Hello, im helping a friend root he's phone.
He is stuck at the "Sony Ericson screen"
This is what we have done so far:
- install superuser/bussybox
- Custom recovery (CWM)
He then went into CWM and clicked:
- backup nandroid
- delete dalvik cache
- reset factory
- install zip from sdcard: Presto ... install it...... . .. . .
- Restart phone.
it gave me an error "bad restore can't restart" then It automaticly jumped to another submenu "no" "-yes -- restore CWN" underneath a warning: may not able to access the restore" I clicked yes and it restarted but never got further then booting
Click to expand...
Click to collapse
have u tried to use SEUS?
we fixed it.
I dont have this phone, so I didnt know you needed to have custom kernel and unlocked baseband.
How can I get the:
1. Latest baseband
2. Unlocked bootloader
to unlock the bootloader you have to check This
for latest baseband update the phone with Update Service
HashiKyu said:
to unlock the bootloader you have to check This
for latest baseband update the phone with Update Service
Click to expand...
Click to collapse
Thank you.
Where can I find this kernels
nAa AND ALFS KERNEL ?
or do they come with the ROM and automatically flash?
you can find in one of the Development Thread, you have to flash it first with flashtool then you can flash the ROM via CWM..
U means u didn't install X recovery.... If u install cwm its possible u having this problem... Cwm only work on stock rom.... Use flash tool and repair.. Install X recovery....i installed it too.. I got the same before, though it was on that Site.. This will work on stock rom
Sent from my E15i using Tapatalk 2
xologist said:
Thank you.
Where can I find this kernels
nAa AND ALFS KERNEL ?
or do they come with the ROM and automatically flash?
Click to expand...
Click to collapse
here for the nAa not ICS kernel
http://forum.xda-developers.com/showthread.php?t=1350484
and Alfs
http://forum.xda-developers.com/showthread.php?t=1340861
everything that u need, just search on android original development
bandarigoda123 said:
U means u didn't install X recovery.... If u install cwm its possible u having this problem... Cwm only work on stock rom.... Use flash tool and repair.. Install X recovery....i installed it too.. I got the same before, though it was on that Site.. This will work on stock rom
Sent from my E15i using Tapatalk 2
Click to expand...
Click to collapse
it's work on custom rom and kernel too,, i used it till now..
HashiKyu said:
it's work on custom rom and kernel too,, i used it till now..
Click to expand...
Click to collapse
I meant on Stock kernel

[Q] Bootloop no access to the phone at all

Hi first of all i unlocked bootloader rooted the phone than cwm recovery and then flashed with free xperia cm10.1 and now its just showing cyanogenMod circle and not starting up, also now it says i cant unlock bootloader (i know there is a fix) but i cant do that as i have no access to the phone storage etc at all, any options ideas how bring it back to life please!?
qucharski said:
Hi first of all i unlocked bootloader rooted the phone than cwm recovery and then flashed with free xperia cm10.1 and now its just showing cyanogenMod circle and not starting up, also now it says i cant unlock bootloader (i know there is a fix) but i cant do that as i have no access to the phone storage etc at all, any options ideas how bring it back to life please!?
Click to expand...
Click to collapse
What kernel did you flash, CM have their own set of kernels and using the stock kernel with CM will cause boot-loops and this may be your problem! Flash the kernel from the CM package first then reflash the ROM, or if the kernel was the problem then flashing it via flashtool will solve the problem altogether without reflashing the ROM!!
Hit THANKS if I helped!!
gire.prasad said:
What kernel did you flash, CM have their own set of kernels and using the stock kernel with CM will cause boot-loops and this may be your problem! Flash the kernel from the CM package first then reflash the ROM, or if the kernel was the problem then flashing it via flashtool will solve the problem altogether without reflashing the ROM!!
Hit THANKS if I helped!!
Click to expand...
Click to collapse
Hi I just flashed cwm recovery and then free xperia project cm10.1 but when im trying to flash in flashtool it says that there is no loader in the phone ;/
qucharski said:
Hi I just flashed cwm recovery and then free xperia project cm10.1 but when im trying to flash in flashtool it says that there is no loader in the phone ;/
Click to expand...
Click to collapse
What where you trying to flash? If it was the CM kernel, then are you sure that you have unlocked the boot-loader the right way?
gire.prasad said:
What where you trying to flash? If it was the CM kernel, then are you sure that you have unlocked the boot-loader the right way?
Click to expand...
Click to collapse
yeah I did but it was saying somewhere there is a problem that after flashing it says the bootloader is unknown or you cant unlock it I was trying the fix didn't work either...
qucharski said:
yeah I did but it was saying somewhere there is a problem that after flashing it says the bootloader is unknown or you cant unlock it I was trying the fix didn't work either...
Click to expand...
Click to collapse
Is it a drivers problem?!! Have you installed the fastboot drivers first?
No, no, no!!
You flash the CM10 kernel via fastboot. Boot loop is because you're missing the correct kernel (you still have stock kernel)
Sent from my C6603 using xda app-developers app

Xperia ZR C5503 can't start up while trying root it(10.4.1.B.0.101)

HELP!!
new bought c5503, upgraded to the latest 10.4.1.B.0.101.
I unlocked the bootloader first, then use 'fastboot' flash the CWM recovery(v6.0.3.6), after that, my phone can't start up, only show the "free xperia" logo, and the xperia logo, then the screen mess, repeat and repeat.
I can go into the cwm recovery with the "UP" volume key.
is there anyone can help me with this situation? many thanks!!!
mythomasy said:
HELP!!
new bought c5503, upgraded to the latest 10.4.1.B.0.101.
I unlocked the bootloader first, then use 'fastboot' flash the CWM recovery(v6.0.3.6), after that, my phone can't start up, only show the "free xperia" logo, and the xperia logo, then the screen mess, repeat and repeat.
I can go into the cwm recovery with the "UP" volume key.
is there anyone can help me with this situation? many thanks!!!
Click to expand...
Click to collapse
well.. if you can enter the recovery mode, you can clean flash again the rom, make sure you wipe factory data, partition chace and dalvik chace, and then flash it, and then flash gapps.. i've been there in that situation manytimes, even worse..! try as many as rom suits you.. for now im using unoficial carbon rom for xperia zr.. hope it would help
mythomasy said:
HELP!!
new bought c5503, upgraded to the latest 10.4.1.B.0.101.
I unlocked the bootloader first, then use 'fastboot' flash the CWM recovery(v6.0.3.6), after that, my phone can't start up, only show the "free xperia" logo, and the xperia logo, then the screen mess, repeat and repeat.
I can go into the cwm recovery with the "UP" volume key.
is there anyone can help me with this situation? many thanks!!!
Click to expand...
Click to collapse
I guess that you have flashed a custom kernel and tried to make a normal boot ...Xperia ZR won't boot normaly when you flash a custom kernel!!Just enter to recovery mode,flash root files,and then flash the stock kernel and the device will boot normaly
use flashtool and flash a fresh .tft
jing000l said:
use flashtool and flash a fresh .tft
Click to expand...
Click to collapse
thank you very much~~
it did work!
vuckiez said:
well.. if you can enter the recovery mode, you can clean flash again the rom, make sure you wipe factory data, partition chace and dalvik chace, and then flash it, and then flash gapps.. i've been there in that situation manytimes, even worse..! try as many as rom suits you.. for now im using unoficial carbon rom for xperia zr.. hope it would help
Click to expand...
Click to collapse
Thank you very much, it does help!!
danyznd123 said:
I guess that you have flashed a custom kernel and tried to make a normal boot ...Xperia ZR won't boot normaly when you flash a custom kernel!!Just enter to recovery mode,flash root files,and then flash the stock kernel and the device will boot normaly
Click to expand...
Click to collapse
Thanks a lot, i tried to flash the stock kernel and it did work !:victory:

Black screen after flashing aokp

Hi,
i'm very afriad to have bricked my xperia sp...
I rooted it, unlocked bootloader and then with recovery i wiped and at the end i flashed this http://forum.xda-developers.com/showthread.php?t=2577191
I downloaded not the last nightly, the previous because the last isn't downloadable.
Now the phone doesn't start, it is all black... If i press power botton it vibrates, but not other... If i click it with a power botton the led become green or blue but the screen is already black...
What can i do? bricked? If yes, WHY??
PS: i'm not english, sorry if there are errors.
ixol97 said:
Hi,
i'm very afriad to have bricked my xperia sp...
I rooted it, unlocked bootloader and then with recovery i wiped and at the end i flashed this http://forum.xda-developers.com/showthread.php?t=2577191
I downloaded not the last nightly, the previous because the last isn't downloadable.
Now the phone doesn't start, it is all black... If i press power botton it vibrates, but not other... If i click it with a power botton the led become green or blue but the screen is already black...
What can i do? bricked? If yes, WHY??
PS: i'm not english, sorry if there are errors.
Click to expand...
Click to collapse
Before doing anything ... Remove your device's back cover and push the small button for 5 seconds...
Your device will vibrate 3 times.. After that wait 10 seconds and switch on your device...
Try installing a new recovery... Try the doomlord's advanced system recivery or doomkernel..
After installing the recovery try to flash the zip again..
If nothing happens ... Try a stock rom...
All the best !!! Hit thanks if it helped ...
adil786ali63 said:
Before doing anything ... Remove your device's back cover and push the small button for 5 seconds...
Your device will vibrate 3 times.. After that wait 10 seconds and switch on your device...
Try installing a new recovery... Try the doomlord's advanced system recivery or doomkernel..
After installing the recovery try to flash the zip again..
If nothing happens ... Try a stock rom...
All the best !!! Hit thanks if it helped ...
Click to expand...
Click to collapse
thank you
I installed the stock rom. I re-did the root and re installed this http://forum.xda-developers.com/showthread.php?t=2649923
I tried to install 3 different roms and a kernel but when i power on the phone, the screen is black in each case. Where was I wrong?
ixol97 said:
thank you
I installed the stock rom. I re-did the root and re installed this http://forum.xda-developers.com/showthread.php?t=2649923
I tried to install 3 different roms and a kernel but when i power on the phone, the screen is black in each case. Where was I wrong?
Click to expand...
Click to collapse
Follow these steps... firstly copy the superuser zip file into your external SD card.. Be sure that your device is atleast 60-70% charged..
1. Flash a stock ROM via flashtool in flash mode.
2. when flashing is done... flash the recovery u want from flashtool in fastboot mode.
3. switch ON the device and enter into the recovery ... (CWM recovery)
4. install the zip ... wipe cache and dalvik cache.. and reboot..
try this recovery..
http://doomlord.xperia-files.com/?dlid=WjFfRG9vTUxvUkRfQWR2U3RrS2VybmVsX0ZXLTEwOF92MDU=
Try it bro... and tell.. ALLthe best!!!
adil786ali63 said:
Follow these steps... firstly copy the superuser zip file into your external SD card.. Be sure that your device is atleast 60-70% charged..
1. Flash a stock ROM via flashtool in flash mode.
2. when flashing is done... flash the recovery u want from flashtool in fastboot mode.
3. switch ON the device and enter into the recovery ... (CWM recovery)
4. install the zip ... wipe cache and dalvik cache.. and reboot..
try this recovery..
Try it bro... and tell.. ALLthe best!!!
Click to expand...
Click to collapse
how can i flash recovery from flashtool? I tried selecting kernel and tried to flash boot.img but flashtool says that my device hasn't rooted
ixol97 said:
how can i flash recovery from flashtool? I tried selecting kernel and tried to flash boot.img but flashtool says that my device hasn't rooted
Click to expand...
Click to collapse
Are you bootloader locked or unlocked???
adil786ali63 said:
Are you bootloader locked or unlocked???
Click to expand...
Click to collapse
if i wrote the code in dialer the system says yes
ixol97 said:
if i wrote the code in dialer the system says yes
Click to expand...
Click to collapse
then u have not unlocked bootloader thats why u getting problems follow this guide first before anything http://forum.xda-developers.com/showthread.php?t=2354721
Follow the guide to unlock bootloader and than follow
the steps that i told you... It will work!!!
All the best brother!!!
i resolved and i installed the rom thanks
just a little thing: i don't like the lockscreen of that rom, but i love all the other, can i change it?

[Q] PROBLEM!!! Can't flash anything bellow ics

Hi! I have an lg OB running ics 4.0.4(V30B). The phone it's rooted and I have CWM installed from Rom Manager. I can acces Recovery from Rom Manager and with the phone off ( VOLUME PLUS + G KEY). The problem is that I can't flash any Rom bellow ics (not even with Smart Flash Tools) without getting bootloops. I can flash Roms based on ics and above( IZS,CM10.1,NAMELESS ROM NIGHTLIES 4.4.4).
Could someone help me?
Nobody?
JoKeR[RO-VL] said:
Nobody?
Click to expand...
Click to collapse
I was hoping you fixed the issue. I don't know what to do.
It's a matter of unlocking the boot loader. Once you do that, you can jump back and forth between ICS-based ROMs and everything else.
Gingerbread ROMs include the boot loader (marvel and Huexxx).
androcraze said:
I was hoping you fixed the issue. I don't know what to do.
It's a matter of unlocking the boot loader. Once you do that, you can jump back and forth between ICS-based ROMs and everything else.
Gingerbread ROMs include the boot loader (marvel and Huexxx).
Click to expand...
Click to collapse
Man I can flash ICS-based ROMs .JB and KK, I can't flash GB stock or GB-based ROMs, not even with SFT.
I think the bootloader it's unlocked because I can acces CWM from switch off phone(key combo)....I am confused because i read many tutorials but they are contradictory
That happends also with me 2 times.
Just flash CWM recovery again.
ptxpaulo said:
That happends also with me 2 times.
Just flash CWM recovery again.
Click to expand...
Click to collapse
Already tried....when i try to flash a GB ROM stock or custom GB-based Rom I get stuck in a bootloop.Same story with Smart Flash Tools...SFT says "succes", I hear the "ta daaa" sound ,phone reboots but stuck in a bootloop.
JoKeR[RO-VL] said:
Already tried....when i try to flash a GB ROM stock or custom GB-based Rom I get stuck in a bootloop.Same story with Smart Flash Tools...SFT says "succes", I hear the "ta daaa" sound ,phone reboots but stuck in a bootloop.
Click to expand...
Click to collapse
Try toii install a ROM right after rebooting from flash.
What I did is: Install a JB ROM, After, I reinstall CWM with ADB, reboot and then I could install any rom.
ptxpaulo said:
Try toii install a ROM right after rebooting from flash.
What I did is: Install a JB ROM, After, I reinstall CWM with ADB, reboot and then I could install any rom.
Click to expand...
Click to collapse
Sorry but how to install CWM with ADB? I've installed CWM(6.0.1.4) only from Rom Manager....
JoKeR[RO-VL] said:
Sorry but how to install CWM with ADB? I've installed CWM(6.0.1.4) only from Rom Manager....
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=1613183
ptxpaulo said:
http://forum.xda-developers.com/showthread.php?t=1613183
Click to expand...
Click to collapse
Doesn't work and its stuck on lg logo now
Try to flash first original Froyo 2.2.2 , and then you can upgrade to GB ! Worked for me !
seby24gl said:
Try to flash first original Froyo 2.2.2 , and then you can upgrade to GB ! Worked for me !
Click to expand...
Click to collapse
Did you unlocked the bootloader first? can you put a link with your froyo and SFT?
I am from Romania so I need an Europe Open
No, I don't tried to unlock bootloader, but like you , I got the bootloops every time I downgrade from ICS, Nameless or cyanogen roms . I use original Froyo - flashed with SFT , then upgrade to GB with Cwm recovery patch- flashed with SFT, then boot to recovery and install Nameless. I will give you the links, once I uploaded to my dropbox.
Here, I hope will help you : https://www.dropbox.com/s/psniks1yvqwymy9/firmware v10a-europe-p970.rar
seby24gl said:
No, I don't tried to unlock bootloader, but like you , I got the bootloops every time I downgrade from ICS, Nameless or cyanogen roms . I use original Froyo - flashed with SFT , then upgrade to GB with Cwm recovery patch- flashed with SFT, then boot to recovery and install Nameless. I will give you the links, once I uploaded to my dropbox.
Here, I hope will help you : https://www.dropbox.com/s/psniks1yvqwymy9/firmware v10a-europe-p970.rar
Click to expand...
Click to collapse
Thanks bro! Hope it works.
seby24gl said:
No, I don't tried to unlock bootloader, but like you , I got the bootloops every time I downgrade from ICS, Nameless or cyanogen roms . I use original Froyo - flashed with SFT , then upgrade to GB with Cwm recovery patch- flashed with SFT, then boot to recovery and install Nameless. I will give you the links, once I uploaded to my dropbox.
Here, I hope will help you : https://www.dropbox.com/s/psniks1yvqwymy9/firmware v10a-europe-p970.rar
Click to expand...
Click to collapse
JoKeR[RO-VL] said:
Thanks bro! Hope it works.
Click to expand...
Click to collapse
It's not working. Don't know what to try
UP! When I use the bootloader unlocker app the flashing process take about 2-3 seconds and the app closing by itself without any message like "succes". I even tried to flash a u-boot img uploaded by huexxx and at the second reboot the phone stucks on lg logo without flashing leds
JoKeR[RO-VL] said:
UP! When I use the bootloader unlocker app the flashing process take about 2-3 seconds and the app closing by itself without any message like "succes". I even tried to flash a u-boot img uploaded by huexxx and at the second reboot the phone stucks on lg logo without flashing leds
Click to expand...
Click to collapse
Did you already try the alternative way without the app? Which means load the files to your sdcard and afterwards type the dd if=xxxx of=xxxx? This could show if it works or fails. And did you ever flash the LU5900 port? So the early ICS ROM released by Redy, Gabwerkz and me. Try the manual unlock first.
Sent from my XT1052 using XDA Free mobile app
N00BY0815 said:
Did you already try the alternative way without the app? Which means load the files to your sdcard and afterwards type the dd if=xxxx of=xxxx? This could show if it works or fails. And did you ever flash the LU5900 port? So the early ICS ROM released by Redy, Gabwerkz and me. Try the manual unlock first.
Sent from my XT1052 using XDA Free mobile app
Click to expand...
Click to collapse
NO I did not flash the LU5900 port.Where do I need to type dd if ? I use windows 7 on my laptop.
JoKeR[RO-VL] said:
NO I did not flash the LU5900 port.Where do I need to type dd if ? I use windows 7 on my laptop.
Click to expand...
Click to collapse
As written in the thread, type it into terminal emulator (an app). Read the thread carefully please.
Sent from my XT1052 using XDA Free mobile app
N00BY0815 said:
As written in the thread, type it into terminal emulator (an app). Read the thread carefully please.
Sent from my XT1052 using XDA Free mobile app
Click to expand...
Click to collapse
OK I have the terminal emulator on my phone.
I've read the thread and it says "Move this two files, bootloader and recovery to the root of memory sdcard;
Enter in the command line
su
dd if=/sdcard/u-boot.img of=/dev/block/mmcblk0p2
dd if=/sdcard/recovery.img of=/dev/block/mmcblk0p4
And reboot or reboot recovery."
I have downloaded all on my laptop(bootloader recovery and su) but I am confuse....what's with that "su"?
Do I have to put it on the root of the sdcard too?
Sorry for my noob question

Categories

Resources