Related
I flashed the latest official firmware...
Than after all my attempts i can't install any ROM, except official 2.1.
Please, write me instructions how to install CM7 - i need help...
I have rooted 2.1 with xRecovery - what's next?
Go to xrecrovery choose instal custom zip from sd card hoose zip from sd card find your mini cm 7 install rom and factory reset/full wipe.
It depends on ROM. Some of CM7 works only on custom kernels, so You should first check if You will be able to unlock bootloader. Look behind Your battery - on the stick there should be something like xxWyy which will tell You the year and the week of Your board. If it's older than 11W26 (26th week of 2011) - U may unlock bootloader and install custom kernel (on Your own risk ;P). If not - You shouldn't do this and search for ROMs working on SE stock kernel
Bolussimo said:
It depends on ROM. Some of CM7 works only on custom kernels, so You should first check if You will be able to unlock bootloader. Look behind Your battery - on the stick there should be something like xxWyy which will tell You the year and the week of Your board. If it's older than 11W26 (26th week of 2011) - U may unlock bootloader and install custom kernel (on Your own risk ;P). If not - You shouldn't do this and search for ROMs working on SE stock kernel
Click to expand...
Click to collapse
Also, some ROM required CWM instead of Xrecovery, so read carefully before attempting anything.
Hmmmm
I unlocked bootloader long time ago(10WW48 on the sticker).
to przemek4113: Just installing from xrecovery gives me a unbooting phone.
I tried Froyo, but it doesn't boot too.
Then i'm flashing(Xrecovery doesn't give me a booting phone even if i recover all system) official 2.1.
This phone was bought with GinderDX on it. But latest versions need new kernels(flashing kernel bricks phone).
May be try Previous versions of GingerDX?
Really, i tried about seven customs...
P.S. I'm installing xrecovery ROM's from Xrecovery and CWM ROM's from CWM...
BEaStia said:
This phone was bought with GinderDX on it. But latest versions need new kernels(flashing kernel bricks phone).
Click to expand...
Click to collapse
Mind to elaborate where you read that "latest versions need new kernels"?
GingerDX runs on STOCK KERNEL, LinuxDX as well as Alfs. I fail to find the part in doixanh's post where it says something about forcing a certain kernel to be used.
Make sure you have an older x8 than 11w29, its under the battery. When the number is 11w29 or newer, you'll not get CM. Unlock your bootloader.
Download and flash FXP kernel. Install official CM with the kernel built-in CWM. I recommend to flash nAa kernel after install the CM, it's much better.
Sent from my E15i using xda premium
If you want CM7 you should go to this thread...http://forum.xda-developers.com/showthread.php?t=1362585
That's my fault - i was speaking about another ROM. Not GingerDX - but it doesn't boot too.
I followed advise about miniCM7.
Flashed kernel ->then wiped all(i disliked the message about ext4 - there's no this partition - probably that's the problem???) ->installed ROM. Nothing.
"nAa kernel" logo appears and then it reboots.
UPD:
I've installed GingerXperia(v19) via CWM.
Then -
I've flashed all kernel,fota and smth else(not all files from 2.1.1).
Then it booted...strange)
But i'll try to work with other kernels...
hi
i had rooted my w8 with super1click installed xrecovery and with it gingerxperia v22.today i installed v24b and rebooted.then installed chargemon zip.but after this my phone stuck at se logo ...its not even shutting down so no xrecovery or pc companion working...somebody pls help...
sreeramllb said:
hi
i had rooted my w8 with super1click installed xrecovery and with it gingerxperia v22.today i installed v24b and rebooted.then installed chargemon zip.but after this my phone stuck at se logo ...its not even shutting down so no xrecovery or pc companion working...somebody pls help...
Click to expand...
Click to collapse
Probably:
1)make a backup of all data
2)flash stock kernel
2.5)wipe
3)install custom
3.5)wipe
4)recover data
?
1.As my phone is not booting can't take back up but i have previous back up with me
2,how can i flash stock kernel ?is it with flash tool?
sreeramllb said:
1.As my phone is not booting can't take back up but i have previous back up with me
2,how can i flash stock kernel ?is it with flash tool?
Click to expand...
Click to collapse
Flash Tool - I've seen links on it thousand times on 4pda.ru, but not here - i suppose it to be in the branch about X10.
http://www.mediafire.com/?z7fmpiragbbdxdu - here is flasher.
http://depositfiles.com/files/c2gllgt6t - or here, with official firmware
It would be great if somebody could provide the step by step procedure of flashing my w8 to get past the se logo....
1)Download all archives above
2)Run flasher
3)Press "Flash" and choose necessary firmware
4)follow advices of software
5)reboot -> You have official 2.1
then
1)check your bootloader(http://4pda.ru/forum/dl/post/1227710/S1tool.7z) with this tool
2)unlock it if it is able for you
3)take root(superoneclick with debugging)
4)make xrecovery
5)install any xrecovery zip
or
alt 5)make CWM
alt 6)install any CWM zip
or
install kernel
then install zip
Firstly try it from xrecovery. If you have some problems - write PM to me)
I have done it and successfully flashed as per flashtool...but now even i cant boot stuck at "sony ericsson" now the animated logo works and reboots automatically...pls help
Have you done "user-wipe" in Flash Tool???
Here is from friendly branchcontains a collection of GingerDX 013-022 and some other goodies in the "Sony Ericsson" folder - i.e. Basebands, PCC, SEUS, Flashtool)
http://www.mediafire.com/?eca0sualnao4c4c
Thanks to B.Jay
Atlast with full user data wipe in flash tool I recoverd my phone...THANKS A LOT!!!
Again rooted,Xrecovery and installed GX V24b-I would like to know how to enable multi touch in it please?
How to make xperia x8 able multi touch.
i want to know what i have to do to make xperia x8 able multi touch(im using gingerxperia v23 on my x8)...can anybody help me plz..i appreciate your help...
:-D
chehady said:
i want to know what i have to do to make xperia x8 able multi touch(im using gingerxperia v23 on my x8)...can anybody help me plz..i appreciate your help...
:-D
Click to expand...
Click to collapse
Ok here is a nice way how to enable it hope it helps you
http://forum.xda-developers.com/showthread.php?t=1135965
Sent from my E15i using XDA App
I can't install any custom rom on my x8. I instal it with xRecovery or CWM, do full wipe, rebot, and then stucks at "sony ersicsson" logo!
i have do that for 5 or 6 times whit different roomx..stucks at sony logo. I restore it at 2.1 whit seus. Every time when i try..it fail!
Any help..please!
Sory for bad english
Flash your phone with seus,pc companion or flashtool.I always flash my phone with seus
tujamo1 said:
I can't install any custom rom on my x8. I instal it with xRecovery or CWM, do full wipe, rebot, and then stucks at "sony ersicsson" logo!
Any help..please!
Sory for bad english
Click to expand...
Click to collapse
which ROm are you trying to install? Please provide more info on your problem, so we could help you better
tujamo1 said:
I can't install any custom rom on my x8. I instal it with xRecovery or CWM, do full wipe, rebot, and then stucks at "sony ersicsson" logo!
Any help..please!
Sory for bad english
Click to expand...
Click to collapse
There are some problem that causes custom rom cannot boot. I will state the problem but, you gonna go search it for yourself.
1.Busybox not correctly installed
2.Root incorrectly
3.Baseband incompatible
4.Rom need custom kernel to work (Extra care.)
tujamo1 said:
I can't install any custom rom on my x8. I instal it with xRecovery or CWM, do full wipe, rebot, and then stucks at "sony ersicsson" logo!
Any help..please!
Sory for bad english
Click to expand...
Click to collapse
Im guessing your coming from stock ,, so heres what you gotta do
if you bought the cell recently you don't need tio update your baseband,,
anyways heres what you must do
1. Root your phone
2.install xrecovery /Cwm
3.Move your desired rom to you memory cards,, not on any folder directly on the card
4. reboot and open xrecovery/Cwm(whichever the rom requires)
5.Data reset
6.Flash rom
anyways some roms require custom kernels in that case learn howto unlock your bootloader and flash the required custom kernel
and your good to go
Hit the thanks button if i helped
AbirXtreme said:
Im guessing your coming from stock ,, so heres what you gotta do
if you bought the cell recently you don't need tio update your baseband,,
anyways heres what you must do
1. Root your phone
2.install xrecovery /Cwm
3.Move your desired rom to you memory cards,, not on any folder directly on the card
4. reboot and open xrecovery/Cwm(whichever the rom requires)
5.Data reset
6.Flash rom
anyways some roms require custom kernels in that case learn howto unlock your bootloader and flash the required custom kernel
and your good to go
Hit the thanks button if i helped
Click to expand...
Click to collapse
Also THE MAIN ONE make sure usb debugging is enabled
I do that all the time when i trying..
I do this for some times..5 or 6..whit different rooms. all the time stucks at sony logo and i can't enter in xRec or CWM..i restore it whit seus
przemek4113 said:
Flash your phone with seus,pc companion or flashtool.I always flash my phone with seus
Click to expand...
Click to collapse
I do that all the time when i trying..
AbirXtreme said:
Im guessing your coming from stock ,, so heres what you gotta do
if you bought the cell recently you don't need tio update your baseband,,
anyways heres what you must do
1. Root your phone
2.install xrecovery /Cwm
3.Move your desired rom to you memory cards,, not on any folder directly on the card
4. reboot and open xrecovery/Cwm(whichever the rom requires)
5.Data reset
6.Flash rom
anyways some roms require custom kernels in that case learn howto unlock your bootloader and flash the required custom kernel
and your good to go
Hit the thanks button if i helped
Click to expand...
Click to collapse
I do that..for 5 or 6 times..it fails!
tujamo1 said:
I do that..for 5 or 6 times..it fails!
Click to expand...
Click to collapse
-use flashtool
Okay now,
-root your phone(turn on usb debugging. don't remove usb yet)
-install busybox (don't remove usb yet)
-reboot your phone, if flash tool on PC showing busybox version : XXX XXX or whatever you are good to go if not, redo, (Problem in flashtool, driver or usb debugging not turned on)
-install xRecovery
-continue on Post by AbirXtreme ~
Note: when busybox showing version, there's is no need to use seus to go back again. you may just pull out the battery(with usb unplugged), wait for 10 sec and turn on again. Experiment with installing xRecovery on phone boot-up and try again without using seus... and if you stuck on the sony ericsson logo, wait... then try lock your screen. if screen can be locked (turn dark) mean that your root+busybox are good but xRecovery are not, just try many times to get to it.... and if all those above is not working... search other dev or thread
---------- Post added at 11:47 AM ---------- Previous post was at 11:40 AM ----------
tujamo1 said:
I can't install any custom rom on my x8. I instal it with xRecovery or CWM, do full wipe, rebot, and then stucks at "sony ersicsson" logo!
i have do that for 5 or 6 times whit different roomx..stucks at sony logo. I restore it at 2.1 whit seus. Every time when i try..it fail!
Any help..please!
Sory for bad english
Click to expand...
Click to collapse
ah, sorry to my previous post.... i wasn't read it carefully....
now that you can enter xRecovery/Cwm is good
now what you need is,
1. check the rom post for more info, if it says for custom kernel/alfs kernel/nAa kernel. Sorry you can't use this as your rom.(unlocking your bootloader will fix this issue. WARNING:It's dangerous, search )
2. Try flash my Fix for stock kernel and Fix for low performance at my post in dev section
3. Try full-wipe in every rom if you still have this problem
4. Cannot help your further
A little stupid hint...
Are you sure you are stuck at se logo? I mean, have you wait enough? Sometimes it gets up to 5 min to start and especially first time...
Sent from my E15i using xda premium
I think I understand you problem here
I think I understand your problem here.
Do not Full wipe after installing ROM
Always full wipe before installing, not after....I hope this helps
Change Your Baseband! if Your Baseband finish in .......06
you need change it to ............15
Check your baseband in Settings/about phone
I Haved This problem and I Solve it Changing My Baseband! xD
so as mine can any one know how to upgrade 11W42
it is probably the fact you need custom kernel. But before trying to unlock bootloader, turn phone off,, take back cover and battery off and check your phones date ie
10w56 or 11w34 etc
Sent from my X8 using XDA App
sambavadekar said:
I think I understand your problem here.
Do not Full wipe after installing ROM
Always full wipe before installing, not after....I hope this helps
Click to expand...
Click to collapse
Not in some cases. Some DEVS put when to do full wipe. So it depends on what the installation instructions are
Sent from my X8 using XDA App
CKKnot said:
-use flashtool
Okay now,
-root your phone(turn on usb debugging. don't remove usb yet)
-install busybox (don't remove usb yet)
-reboot your phone, if flash tool on PC showing busybox version : XXX XXX or whatever you are good to go if not, redo, (Problem in flashtool, driver or usb debugging not turned on)
-install xRecovery
-continue on Post by AbirXtreme ~
Note: when busybox showing version, there's is no need to use seus to go back again. you may just pull out the battery(with usb unplugged), wait for 10 sec and turn on again. Experiment with installing xRecovery on phone boot-up and try again without using seus... and if you stuck on the sony ericsson logo, wait... then try lock your screen. if screen can be locked (turn dark) mean that your root+busybox are good but xRecovery are not, just try many times to get to it.... and if all those above is not working... search other dev or thread
---------- Post added at 11:47 AM ---------- Previous post was at 11:40 AM ----------
ah, sorry to my previous post.... i wasn't read it carefully....
now that you can enter xRecovery/Cwm is good
now what you need is,
1. check the rom post for more info, if it says for custom kernel/alfs kernel/nAa kernel. Sorry you can't use this as your rom.(unlocking your bootloader will fix this issue. WARNING:It's dangerous, search )
2. Try flash my Fix for stock kernel and Fix for low performance at my post in dev section
3. Try full-wipe in every rom if you still have this problem
4. Cannot help your further
Click to expand...
Click to collapse
Thant's man. It work!
wilbso said:
Not in some cases. Some DEVS put when to do full wipe. So it depends on what the installation instructions are
Sent from my X8 using XDA App
Click to expand...
Click to collapse
I'm do this all the time when i flash a new rom. But a had make my phone work. Thanks anyway!
samu1player said:
Change Your Baseband! if Your Baseband finish in .......06
you need change it to ............15
Check your baseband in Settings/about phone
I Haved This problem and I Solve it Changing My Baseband! xD
Click to expand...
Click to collapse
My baseband ends with .......15
Hi,
I just recently unlocked my bootloader and attempted to flash the nAa-ics-004 kernal on my X8.
After booting into ClockworkMod Recovery I wiped and flashed MiniCm9 3.0.3.
Now when I boot, I get stuck on the "nAa" screen and the logo keeps repeating itself but I can still press back to get into recovery.
So how can I boot into minicm9 now?
Ummmm.... help would be nice.
EDIT: I'm a noob, I unlocked with X8Toolbox, flashed with flashtool but flashtool only said "loader.sin is flashing" or whatever it says, should it say both? I did select both loader.sin and kernal.sin using SHIFT.
Yharooer said:
Hi,
I just recently unlocked my bootloader and attempted to flash the nAa-ics-004 kernal on my X8.
After booting into ClockworkMod Recovery I wiped and flashed MiniCm9 3.0.3.
Now when I boot, I get stuck on the "nAa" screen and the logo keeps repeating itself but I can still press back to get into recovery.
So how can I boot into minicm9 now?
Ummmm.... help would be nice.
Click to expand...
Click to collapse
are u using nAa ics kernel or reflash nAa kernel
It says "2.6.29.6-nAa-ics-C..." but the rest goes off the screen.
I think I flashed the ics nAa.
Yharooer said:
It says "2.6.29.6-nAa-ics-C..." but the rest goes off the screen.
I think I flashed the ics nAa.
Click to expand...
Click to collapse
is your baseband 15
Yharooer said:
It says "2.6.29.6-nAa-ics-C..." but the rest goes off the screen.
I think I flashed the ics nAa.
Click to expand...
Click to collapse
Reflash the ics kernal..Download here http://forum.xda-developers.com/showthread.php?p=24304432
Turn on your device..wait for 3-5min..
Make sure u flash the gapps for ics
Yharooer said:
Hi,
I just recently unlocked my bootloader and attempted to flash the nAa-ics-004 kernal on my X8.
After booting into ClockworkMod Recovery I wiped and flashed MiniCm9 3.0.3.
Now when I boot, I get stuck on the "nAa" screen and the logo keeps repeating itself but I can still press back to get into recovery.
So how can I boot into minicm9 now?
Ummmm.... help would be nice.
EDIT: I'm a noob, I unlocked with X8Toolbox, flashed with flashtool but flashtool only said "loader.sin is flashing" or whatever it says, should it say both? I did select both loader.sin and kernal.sin using SHIFT.
Click to expand...
Click to collapse
If install finished was there install satus 0?
fotak-x said:
is your baseband 15
Click to expand...
Click to collapse
Right now I'm not at my computer but I think that may be the reason why.
Ummm... If you don't mind how do I upgrade, (preferably only thru flash mode only)
Any help would be much appreciated
Yharooer said:
Right now I'm not at my computer but I think that may be the reason why.
Ummm... If you don't mind how do I upgrade, (preferably only thru flash mode only)
Any help would be much appreciated
Click to expand...
Click to collapse
okay
1. first check your baseband is xxx015 (if not, you can find the baseband from B.jay folder and flash it!)
2. Root your phone
- with flash tool by clicking the padlock icon
OR
- copy these files (password=cintaindonesia) and extract on your SDcard, copy paste to system\bin with rootexplorer
4. then unlock bootloader by s1tool or flashtool (NOT FOR 11w29+ !!!)
5. flash the latest ICS kernel
6. backup
7. factory reset, wipe data, etc
8. flash the ROM
9. Done!
Thanks!
Thanks alot guys for your help! I now got MiniCM9 working! Thanks once again.
Yharooer said:
Thanks alot guys for your help! I now got MiniCM9 working! Thanks once again.
Click to expand...
Click to collapse
your'e welcome dude!
nice!
Hello guys!
I recently tried to update my rom to my xperia x8 and i chose ICS minicm9 - shakira 3-0-4 for xperia x8. I unlocked my bootloader succesful and i installed the nAa kernel version 2.6.29.6 to my phone (i forgot to say i ve already rooted it and did a backup file with xrecovery).
Anyways the phone stuck at the sony ericsson screen after the kernel screen and never opened... I opened CWM , made a backup , wiped the data and tried to install the ICS but every time i tried (3-4 times) i got an error : "Can't open /sdcard/MiniCM9-3.0.4-shakira.zip (bad) Installation aborted". I tried to do my xrecovery backup but CWM couldn't find any backup files! I tried to connect phone with PC companion in flash mode but it recognises it as an xperia x10 and i can't do anything with it!!! I tried everything pls help me!!!:crying:
Leftaas said:
Hello guys!
I recently tried to update my rom to my xperia x8 and i chose ICS minicm9 - shakira 3-0-4 for xperia x8. I unlocked my bootloader succesful and i installed the nAa kernel version 2.6.29.6 to my phone (i forgot to say i ve already rooted it and did a backup file with xrecovery).
Anyways the phone stuck at the sony ericsson screen after the kernel screen and never opened... I opened CWM , made a backup , wiped the data and tried to install the ICS but every time i tried (3-4 times) i got an error : "Can't open /sdcard/MiniCM9-3.0.4-shakira.zip (bad) Installation aborted". I tried to do my xrecovery backup but CWM couldn't find any backup files! I tried to connect phone with PC companion in flash mode but it recognises it as an xperia x10 and i can't do anything with it!!! I tried everything pls help me!!!:crying:
Click to expand...
Click to collapse
first of all.... cwm will never find the backup made by xrecovery because they are in different folders... for cwm to find them take the backup folder from xrecovery folder to the clockworkmod folder...
and then
reflash the kernel and try installation again to remove that stuck at SE logo problem.....
you need to install """"nAa ICS"""" kernel for miniCM9.... i think you installed nAa GB kernel and that is what creating problems..
try installing rom after that if it shows error there is some problem with the zip file i suppose... tell me if it gives error after this and see if it gives status 6 or status 7 error..
anyway you will have to redownload the zip..something might have went wrong during download.
and the flashtool recognizes it as x10 because you set it that way...reinstall it...
when it asks you do you want to "permanenty identify device?" i think you selected x10... next time it asks you select X8
Here's my opinion. I'm not sure how but if what you say is true, that you're running nAa ics kernel, it shouldn't be stuck at the SE logo. 2nd, if you're on a custom kernel, you won't have xrecovery. Third, our phones, after flashing kernels are recognized as X10's, not X8's.
@CnC-ROCK xrecovery backups can't be restored that way. i tried and failed
@OP if you've successfully installed nAa-ICS then you should not see the SE logo. try reflashing and wiping cache partition.
Well nothing worked! I have the proper kernel for my device and everything but i can't install the ICS and i did what you said me about the restore but it told me something about MD5 (doesn't match i think or something)
Reflash stock kernel.Then flash the ROM again. And finally flash your kernel back.
Please Press The Thanks Button
It's my matter how I send this.
Please stop telling me to reflash again! I told you i did it many times and nothing worked! Please tell me how i can change to the basic kernel and then i ll do the process again from the begin , as nothing works! Thank you!
Download flashtool and stock firmware then flash firmware through flashtool
Sent from my MANGO using Tapatalk2
IAmNice said:
Didnt he just say dont tell him to reflash stock again?
As for the OP. Ive never seen this before. Cant think of a solution yet.
Sent from my E15i using xda app-developers app
Click to expand...
Click to collapse
He actually said don't tell him to reflash custom kernel. And to be honest if he's seeing anything with Sony on boot then he definitely isn't flashing right.
OP how exactly did you flash the ICS kernel?
Sent from my GT-I9000 using xda premium
download the file again, sometimes it happens when the file is not properly downloaded.
@op try to restore with pccompanion.
If you can't do this,you have to flash (stock kernel and stock rom)
Sent from my X8 using xda premium
sgt. meow said:
@CnC-ROCK xrecovery backups can't be restored that way. i tried and failed
@OP if you've successfully installed nAa-ICS then you should not see the SE logo. try reflashing and wiping cache partition.
Click to expand...
Click to collapse
they dont work..but they are listed i think... dont remember... i mean just to list and not use....he said he was unable to see them....
---------- Post added at 06:07 PM ---------- Previous post was at 06:05 PM ----------
RohinZaraki said:
Here's my opinion. I'm not sure how but if what you say is true, that you're running nAa ics kernel, it shouldn't be stuck at the SE logo. 2nd, if you're on a custom kernel, you won't have xrecovery. Third, our phones, after flashing kernels are recognized as X10's, not X8's.
Click to expand...
Click to collapse
flashtool recognizes my phone as X8 and not X10...according to what you are saying then there is problem in my flashtool....
NIMBAH said:
He actually said don't tell him to reflash custom kernel. And to be honest if he's seeing anything with Sony on boot then he definitely isn't flashing right.
OP how exactly did you flash the ICS kernel?
Sent from my GT-I9000 using xda premium
Click to expand...
Click to collapse
I connext my phone to the pc with the usb then i open flashtool and select xperia x8. Then i click the flash icon(1st icon) and click flashmode i select the kernel i want and then i click "ok" i wait til it says me it's done and i unplug the usb and reboot my phone.
Sorry for reposting but it has been quite a lot of time i ve posted and none respond! So! I flashed the stock kernel and backuped (the person who told me to do it took a "thank you") and now i want to redo the process... What do you suggest me so that i won't stuck again on this step??
follow instructions!!? (I guess..)
Guys i tried again today and now i get another error!
CWM says :
Installing /sdcard/update.zip
Finding package...
Opening package...
E: opening /res/keys : No such file or directory
E: Failed to load keys
Installation Aborted.
Now?
didn't see all posts ... nvm
Hello guys, im new here but i need your help.
Like i said i have xperia lt30p and I cant install http://forum.xda-developers.com/showthread.php?t=2040066, dont know why i did everytihing with instruction for locked bootloader and still the same. So my problem is : after installing everything im trying to turn on my xperia and its just vibrate and nothing going on... just one vibration. help me please...
igorskyxxx said:
Hello guys, im new here but i need your help.
Like i said i have xperia lt30p and I cant install http://forum.xda-developers.com/showthread.php?t=2040066, dont know why i did everytihing with instruction for locked bootloader and still the same. So my problem is : after installing everything im trying to turn on my xperia and its just vibrate and nothing going on... just one vibration. help me please...
Click to expand...
Click to collapse
sounds like a kernel issue.
Code:
Locked bootloader
1. Root with Bin4ry's method(*)
2. install CWM for locked bootloaders.(*)
3. Go to recovery, wipe cache & dalvik-cache
4. Flash ROM
5. Flash kernel .140 (if you haven't already)
6. Reboot.
7. When CWM asks "ROM may flash stock recovery on boot. Fix?", answer "No".
8. Enjoy
(*) skip these steps if you're already on a custom ROM with CWM recovery or unlocked bootlader.
Are you sure you did all these?
s
gregbradley said:
sounds like a kernel issue.
Code:
Locked bootloader
1. Root with Bin4ry's method(*)
2. install CWM for locked bootloaders.(*)
3. Go to recovery, wipe cache & dalvik-cache
4. Flash ROM
5. Flash kernel .140 (if you haven't already)
6. Reboot.
7. When CWM asks "ROM may flash stock recovery on boot. Fix?", answer "No".
8. Enjoy
(*) skip these steps if you're already on a custom ROM with CWM recovery or unlocked bootlader.
Are you sure you did all these?
Click to expand...
Click to collapse
yes and not once, i have tried 4 times...
ok, does your phone turn on at all?
If so tell me what it says in the last 4 entries in
settings/about phone.
If it doesn't do a repair using pccompanion then tell me the same thing again
after flashing I cant but always i can "reset" by update service by sony , now its
android ver. 4.1.2
bandwidth version 8960A-AAAAAANAZQ-10015031-47
kernel 3.4.0-g5b05b2-00811-g8c0b35e
[email protected]) ) #1 SMP preempt tue mar 19 12:47:46 2013
And the last line : 91.A.1.140
ok, how are you installing CMW? Which link are you following?
cwm
gregbradley said:
ok, how are you installing CMW? Which link are you following?
Click to expand...
Click to collapse
dropbox.com/s/c4ss88zgnx178ot/CWM4XperiaT_v7i_JB.zip
This one..., im just connecting xperia t with usb debugg ,and via PC click install.bat ,something wrong?
That should be fine.
Next try this.
Flash it again, but this time goto
mouts and storage and make sure you mount system first, then flash it...
EDIT:
Just a thought, after flashing the rom are you wiping system as well as dalvik and cache...if so then D'OH, don't wipe system, that deletes the rom you just installed
after flashing rom? i dont wipe anything , just before flashing
ok
gregbradley said:
That should be fine.
Next try this.
Flash it again, but this time goto
mouts and storage and make sure you mount system first, then flash it...
EDIT:
Just a thought, after flashing the rom are you wiping system as well as dalvik and cache...if so then D'OH, don't wipe system, that deletes the rom you just installed
Click to expand...
Click to collapse
I dont undestand, what do u mean goto mouts and storage and make "SURE you mount system first" ?
enter recovery
goto the section that says
mount and storage
then choose mount system
then flash the rom
will do in 30mins, will say progress here
it still nothing... just vibrating
Redownload the .zip file
Sent from my GT-P3110 using xda app-developers app
yeah,but i think its not .zip problem... I had the same problem with CM 10 ... Maybe I just cant install other roms on my xperia T from orange with blocked bot etc...
You cant install custom kernels but you should be able to install stock based roms.
Are you trying to install a kernel? If so then dont.
Repair in pccompanion, root, install cmw recovery and flash rom.
It should work, if not try a different rom that is stock based
Sent from my GT-P3110 using xda app-developers app
I'll be grateful if u can show me rom which can work on my XPERIA T , I'm not experienced enough to choose stock or not ,sorry for problems..
And if u can say, how i can get flashtool? I will try this one http://forum.xda-developers.com/showthread.php?t=2026885
I have got EMMA but its not avaible for me...
Of coyrse you cant use emma. If you read the instructions its for unlocked bootloaders.
In order to get flashtool just look in the dev section for it.
To decide if a rom is stock based, read the op of the roms thread, it will say what it is based on there.
You should be able to flash my rom if you follow the instructions properly
Sent from my GT-P3110 using xda app-developers app