Database Develop

[Q] OverClock -Governor- Antutu CPU Master

HELLO AND SALAM SATU MALAYSIA
Since i was newbie about android,
i try to overclock my Xperia X8.
so i went to market and i found Antutu CPU Master.
the problem is i found something that i never heard before.::::::
"GOVERNOR"
could someone told me..what is governor actually...
and what different better the governor module?
i only found about smartass..the other module..i didnt find in xda forum.
i hope someone could help me here..before i accidentally brick my phone.

Cpu governor is control the Cpu freq.
- The OnDemand governor is the default option used by Android. It scales the CPU speed between the minimum and maximum speeds depending on CPU load. If the system needs more speed, the kernel will rapidly scale up the CPU speed.
- The Conservative sets the CPU speed in a similar way to the Ondemand governor, but scales the CPU up much less rapidly. This would theoretically save battery power, but may lead to less responsiveness.
- The Userspace governor is currently useless. It’s another way for applications to set the CPU speed that setCPU does not use.
- The Performance governor always keeps the CPU at the maximum set frequency.
Additionally, he makes reference to another option, which is not currently part of the setCPU app, so I am assuming that this is one that was removed in later versions.
- The Powersave governor always keeps the CPU at the minimum set frequency.
- Except for “Userspace,” no matter which governor you set, the CPU will always stay within the bounds of the maximum and minimum speeds you set in setCPU.

tony-noob said:
Cpu governor is control the Cpu freq.
- The OnDemand governor is the default option used by Android. It scales the CPU speed between the minimum and maximum speeds depending on CPU load. If the system needs more speed, the kernel will rapidly scale up the CPU speed.
- The Conservative sets the CPU speed in a similar way to the Ondemand governor, but scales the CPU up much less rapidly. This would theoretically save battery power, but may lead to less responsiveness.
- The Userspace governor is currently useless. It’s another way for applications to set the CPU speed that setCPU does not use.
- The Performance governor always keeps the CPU at the maximum set frequency.
Additionally, he makes reference to another option, which is not currently part of the setCPU app, so I am assuming that this is one that was removed in later versions.
- The Powersave governor always keeps the CPU at the minimum set frequency.
- Except for “Userspace,” no matter which governor you set, the CPU will always stay within the bounds of the maximum and minimum speeds you set in setCPU.
Click to expand...
Click to collapse
thanks button click =)
btw,what apps u use to overclock.?
and what governor u preferred? and what is ur min n max scale?

naim.kamiya said:
thanks button click =)
btw,what apps u use to overclock.?
and what governor u preferred? and what is ur min n max scale?
Click to expand...
Click to collapse
I'm not using any app. I overclocked in my system (alfs+GDX). My governor is OnDemand. Min 129mhz - max 748 mhz.

tony-noob said:
I'm not using any app. I overclocked in my system (alfs+GDX). My governor is OnDemand. Min 129mhz - max 748 mhz.
Click to expand...
Click to collapse
owh.ok...
thanks again.
im not using GDX,,but..can i install alfs in my phone?
im using Linux Escha Arch v1

naim.kamiya said:
owh.ok...
thanks again.
im not using GDX,,but..can i install alfs in my phone?
im using Linux Escha Arch v1
Click to expand...
Click to collapse
Offcourse you can install alfs but you should unlock your bootloader...

tony-noob said:
Offcourse you can install alfs but you should unlock your bootloader...
Click to expand...
Click to collapse
i already make it,...
thanks a lot.
last question...what version u have?
it is ok to use alfs kernel with different roms,not GDX?

naim.kamiya said:
i already make it,...
thanks a lot.
last question...what version u have?
it is ok to use alfs kernel with different roms,not GDX?
Click to expand...
Click to collapse
I have vesion 5. You can use alfs with other roms but maybe wifi won't work or vibration....

tony-noob said:
I have vesion 5. You can use alfs with other roms but maybe wifi won't work or vibration....
Click to expand...
Click to collapse
i use alf kernel version 3..
so far,i didnt find any bug.
wifi n vib work very well with my linuxperia arch v1 rom.
i use antutu benchmark..i get 1881..
superb ..thanks a lot.

1881 good. Do you like LinuXperia v1 ? Come soon LinuXperia Esca Arch 3 ( overclock, bravia hack, xloud, dsp manager vs )

alessiocerci said:
1881 good. Do you like LinuXperia v1 ? Come soon LinuXperia Esca Arch 3 ( overclock, bravia hack, xloud, dsp manager vs )
Click to expand...
Click to collapse
Cant wait for linuxperia v3
Sent from my E15 using xda premium

SetCPU settings for double battery life

Hey guys can someone share what's the best profile and configuration to double the battery life in our devices using setCPU..
Thanks in Advance!
Sent from my CSL-MI410 using XDA App

Hi there,
I think, it depends on how is your settings now. You can try 500 mhz and disable mobile data first.

hmm.. okay.. will 500Mhz double the life and also give a decent performance??

i'm more concern on the voltage control.
can everyone share their fine profile for voltage?
btw, my setcpu setting were recommended by CacingKalung.
25mhz and 1125mhz with smartassv2.

thepranam said:
Hey guys can someone share what's the best profile and configuration to double the battery life in our devices using setCPU..
Thanks in Advance!
Sent from my CSL-MI410 using XDA App
Click to expand...
Click to collapse
The following works for me all the time
Main Profile - MAX - Dont set it all the way to OC if you are using any of the modded kernels, keep it just above 1Ghz, i set at 1200.
MIN - around 600. Use SmartassV2, if unavailable use Performance.
Turn on Profiles and set 2 important profile
Screen Off - MAX & MIN - 122Mhz. Priority 90%, Set governer Conservative
In Call - MAX - Around <=500, MIN = Around 300, Priority - 100, Set governer Performance. This is to avoid any lags when call comes in
With this I am able to stretch the battery easily to 1.5 days. I have observed the performance to be uniform whether on CM7 or MIUI.
Additionally I also configure Adv Task Killer Pro - Always on, Kill Task when screen off, and dont forget to set Ignore for - SetCPU.
This combo of SetCPU and Task Killer works for me ! Try and see if it meets your expectations

How are you able to set exact values of 122 MHz or 300/500 MHz?
On stock ROM, SetCPU only allows for a slider to control the frequency which doesn't allow for precision setting since after about 368 MHz the slider only goes to around 700+ MHz skipping all the frequencies possible in between.
Rgds
Sandy

Im using SET CPU and the ondemand governer gives very good battery life. I keep the min speed to 122 MHZ and Max to 1024 MHZ.
Made three profiles for screen off, temp >40deg and In call. Screen off profile kept to 122MHZ, certainly improved my battery by leaps and bounds.

Setcpu values

HEllo
Im a newbie user of galaxy tab p1000 and currently im using build 34 of
[ROM][ICS 4.0.4] AOKP for P1000/L/N - MILESTONE #5 **MTD** (30/04/2012).
I want to make somthing like this http://forum.xda-developers.com/showthread.php?t=1205854 for galaxy tab.
By default the rom uses max 1000 and min 20.
The idea is to share the setcpu settings of your tabs.
I want to overclock but dont wanna loose stability or force the cpu and break it. I noticed that in some hd games it works a little, little slow....so ive been thinking about making setcpu profiles but need advice.
I thought of reduce cpu on screen off (ej; max 7000 min 150), and make if i can a Game profile with more exhaustive use of cpu ( ej; 1200 max 250 min)
Waiting for your stups and recommandations.
Thanks in advance
Eduardo.

No one posts its values and settings to share ?
Please share your settings and profiles.
Thanks

[Q] Optimal settings for MINI CM9

How well set the settings to the optimal CM9 MINI ROM? I know it was already somewhere, but I can not znaleś.Bardzo mainly I mean if ZRam to be enabled or disabled? And how to set the processor.
Advance thank you very much
If I could give it some help thanks

Smartass v2 cpu governor - cpu frequency 122 - 729.
Z-ram when ur not using supercharger then 18% if u do then disable it..

tiestobunio said:
How well set the settings to the optimal CM9 MINI ROM? I know it was already somewhere, but I can not znaleś.Bardzo mainly I mean if ZRam to be enabled or disabled? And how to set the processor.
Advance thank you very much
If I could give it some help thanks
Click to expand...
Click to collapse
I Use Smartass v2 cpu governor - cpu frequency 122 - 600 works well.
The problem is that the battery is short-lived
Relative Zram I don't have opinion.

[Q] Best CPU Governor and I/O Scheduler for One Power Guard

Hi,
I'm using Co-Core 8.2 and I want to test One Power Guard to improve my battery life.
But I don't have any idea about which CPU governor and I/O scheduler to choose.
Could someone tell me which combination provides the best balance between power-save and performance?
I'm on Jelly Bean 4.1.2
NB. Cocafe recommends PegasusQ as CPU governor and either SIO/ROW for I/O scheduler but I would like to get some feedback from people already using One Power Guard.
Thanks in advance

luisblop said:
Hi,
I'm using Co-Core 8.2 and I want to test One Power Guard to improve my battery life.
But I don't have any idea about which CPU governor and I/O scheduler to choose.
Could someone tell me which combination provides the best balance between power-save and performance?
I'm on Jelly Bean 4.1.2
NB. Cocafe recommends PegasusQ as CPU governor and either SIO/ROW for I/O scheduler but I would like to get some feedback from people already using One Power Guard.
Thanks in advance
Click to expand...
Click to collapse
Pegasus and sioplus
OR
Hotplug and sioplus

DaRkRhiNe said:
Pegasus and sioplus
OR
Hotplug and sioplus
Click to expand...
Click to collapse
Thanks for the answer. I will give a try with Pegasus
However I noticed that sioplus is not available on One Power Guard settings. Only row and sio.
Is sioplus available in Co-core 8.2?

These apps like this just drains your battery. If you want play with CPU, download a CPU controller app. (like SetCPU) and install CoCore 9.0 which is newest version.
When you don't use phone ; 600 MHz Max & HotPlug
When you don't use phone V2 ; 600 MHz Max & Ondemand & deeper sleep status
When you lock phone, don't decrease speed (too much) because it will use whole CPU if it needs ; 800 MHz Max & Ondemand Q/Lulzactive Q/Pegasus Q
When using ; 1000 MHz Max & Ondemand/Interactive/Lulzactive Q/Pegasus Q
When you get mad and crazy about performance, lock the min to max; 1000 MHz min and max & Ondemand & SmartAss (still exists or not I don't know)
If you increase minimum speed it will keep it. So I suggest always keep min to 200MHz. (if exists 0 MHz I don't remember it too)
Edit: and don't go deeper sleep if you use hot plugger governors like Hotplug, Pegasus, Lulzactive Q

FYI
http://forum.xda-developers.com/showthread.php?t=2312491
Powered by CM11

Thanks guys,
I will compare the battery draining with One Power Guard just to give it a try.
If I don't notice any improvement then I will tweak with SetCPU

King ov Hell said:
Edit: and don't go deeper sleep if you use hot plugger governors like Hotplug, Pegasus, Lulzactive Q
Click to expand...
Click to collapse
Hi again,
What exactly do you mean wit "deeper sleep"?
Is that an option or when the display is off after several minutes?
Sorry for my ignorance

luisblop said:
Hi again,
What exactly do you mean wit "deeper sleep"?
Is that an option or when the display is off after several minutes?
Sorry for my ignorance
Click to expand...
Click to collapse
Go to the CoCore's thread you'll see. It's deep sleep level which can increase your battery life when you don't use the device. It's not about using, it's about when it's stand-by.

Ok
After one day even if One Power Guard is a nice app I prefer to switch governor depending on the display status. So I was thinking about using tasker (instead setCPU) which is already running on my phone and this way not adding more background processes.
I set a couple of task using the CPU control from tasker. It is working fine switching governors but I noticed that the frequencies (min and max) don't change. I tried even with shell script and still I don't get to set the max frequency. Then I prefer to make you a couple of questiosn:
-In tasker when using the CPU control. If I change governor. Should it be set in both CPUs (0 and 1) or only in a single one? In my case i set the governor in both.
-I use the terminal to check the current governor and max frequency (for instance for the cpu0)
cat /sys/devices/system/cpu/cpu0/cpufreq/scaling_governor​cat /sys/devices/system/cpu/cpu0/cpufreq/scaling_max_freq​
As said above the governor is succesfully changed but that's not the case for the frequency. Then I tried to run a shell script to change the max frequency as follows:
echo #frequency > /sys/devices/system/cpu/cpu0/cpufreq/scaling_max_freq​
But it seems not working neither. So I wonder if I'm doing something wrong.
NB. By the way I'm happy using the governor hotplug while not using my phone (thanks for the advice). In normal use I set pegasusq with sio and seems working great.