Hi there,
I have version 026 and I want 027 how do I gingerDX v 027 on my phone?
stock kernel as well
1. Download the v07 from here.
2. Download module from http://www.mediafire.com/?86n454in0jdzyac
3. Copy downloaded file on your memry card.
4. Reboot to recovery.
5. Full wipe (data,cache,dalvik)
6. Flash the downloaded files.
7. Reboot and wait.
8. Nextime please read before asking
deedii said:
1. Download the v07 from here.
2. Download module from http://www.mediafire.com/?86n454in0jdzyac
3. Copy downloaded file on your memry card.
4. Reboot to recovery.
5. Full wipe (data,cache,dalvik)
6. Flash the downloaded files.
7. Reboot and wait.
8. Nextime please read before asking
Click to expand...
Click to collapse
do I delete v026?
how do I flash the downloaded files?
And what should I delete in order to preserve memory
Will it also work for stock kernel?
By flashing it will overwrite your old system.
You flash by the same instructions you made to get v26
I guess you have to read what is written here.
Your questions is all basic maybe take sometime to read this. It will teach you so much
hlo friends
THIS IS. THE BEST AND SPEEDEST DOWNLOAD MANAGER FOR YOUR ANDROID DEVICE U MUST HAVE TO INSTALL IT
INSTALLATION METHOD:-
- EXTRACT THE ZIP
-THEN U GOT 2 ZIPS
-INSTALL (ADVANCE_DOWNLOAD_MANAGER.ZIP
*******×REBOOT RO RECOVERY
-WIPE CACHE
-INSTALL ZIP
-DONE:good:
@majay519 is this working on all phones? I am using sgs2 int with 5.1.1. I don't want to get soft brick
yes buddy it's working on all devices (4.4+).no problem flash it .it can't bricked ur phone
Hey,
All my steps:
1. Root device: LINK
2. Install TWRP: LINK
3. Install new CyanogenMod by this LINK
After installing CyanogenMod 13 and boot.img my device just in boot loop.
I've tried install 12 CM, but no luck.
So ... what I need to do ?!
Thank you for your HELP !
Okay, to install the cm there athe this steps:
1 - Open TWRP (I don't know what you used, but i assume you used this one https://dl.twrp.me/klte/twrp-3.0.0-0-klte-klte.img.tar.html )
2 - Wipe Dalvik / ART Cache, Cache, Data and System (do not wipe Micro SDCard or Internal Storage, you need your zips)
2.5 - Wipe System is the only one you probably doens't HAVE to do, but i recommend to do. The other 3 are 101% necessary, because old apps or app caches WILL bootloop you.
IF YOU WIPED SYSTEM, DO NOT REBOOT
3 - Install the Rom Zip file (Extracted from the post https://download.cyanogenmod.org/get/klte-latest.zip )
4 - Install Open Gapps or (anything) Gapps for 6.0 (Again, extracted form the post http://opengapps.org/?api=6.0&variant=nano )
4.5 - As you know, the korean rom is kind different, it requires te boot.img for some reason, well, flash it. (This one, of course http://forum.xda-developers.com/attachment.php?attachmentid=3823989&stc=1&d=1469502182 )
5 - Reboot and enjoy
If you did anything different or in any different order, i suggest you try again, and just a detail, this is the S5 Mini section, not the S5, DO NOT USE files you found here, they WILL bootloop your device
I create viper4android 2.5.0.5 zip to flash.
Steps:
1. Download zip
2. Put zip to device via cabel
3. Boot to TWRP(you need to have unlocked and rooted device)
4. Flash zip which you download
5. Wipe dalvik cache and reboot
You don't have to set linux to perrmisive, I didn't do it and it's work amazing.
Happy flashing
LINK:
https://drive.google.com/open?id=0B6NFfzOiPwTCaXl2WUEzUEpfbXM
what a bout setting?Is it cool to says "No" on Processing line?!
KarloH said:
I create viper4android 2.5.0.5 zip to flash.
Steps:
1. Download zip
2. Put zip to device via cabel
3. Boot to TWRP(you need to have unlocked and rooted device)
4. Flash zip which you download
5. Wipe dalvik cache and reboot
You don't have to set linux to perrmisive, I didn't do it and it's work amazing.
Happy flashing
LINK:
https://drive.google.com/open?id=0B6NFfzOiPwTCaXl2WUEzUEpfbXM
Click to expand...
Click to collapse
:good:
Guys I successfully installed HAVOC-OS located https://forum.xda-developers.com/project-treble/trebleenabled-device-development/gsi-havoc-os-t3930030. The steps I followed are mentioned below
1. Wipe everything except internal storage.
2. Flashed BRK3 Vendor https://mega.nz/#F!wFFQUYbI!GZvNOBSn1wVn8U9mQDzBiw!IQsjlYzA
2. Installed Endurance GSI kernel https://forum.xda-developers.com/galaxy-s9/samsung-galaxy-s9--s9-cross-device-development/kernel-endurance-kernel-v1-0-t3849434
3. Flashed the system image for ARM 64 A only
4. Boot system
5. Reboot to recovery and Flashed Mgisk
6. Gapps will fail to install at first. Just goto wipe -> Adv wipe -> system partition -> Resize. Reboot to recovery and flash Gapps
7. Reboot and enjoy
8. You can test other GSI Roms also and report. The thread is located at https://forum.xda-developers.com/project-treble/trebleenabled-device-development
Thanks buddy. I was looking for the ways to run the GSI. And the method works. Good job
thanks for the guide! im still on an unrooted s9, but if everything works ill definetly make the jump. Can you tell us more about stability, bugs and if there are things not working
So after testing the ROM for 2 days I can say that
1. It is very stable and can be used as a daily driver
2. Everything works, I am not sure about Bluetooth audio though, haven't checked it
3. It can be heavily customized. Unlike LOS, where we have only few of these features available
4. Battery life is the best I got using any other ROM out there (check the screens below). and I am the guy who gets 3 hrs of SOT, when others claimed 5+ hrs on the same ROM.
5. Security patch is latest even as compared to the TW ROMs
6. Regarding camera... Its the same as LOS pie. Use gcam by idan 3.5 fixed and you are good to go.
fingerprint working?
andreMusers said:
fingerprint working?
Click to expand...
Click to collapse
Yes it is
Thanks for trying this out. I'm only a few months in with my exynos S9 on android pie, so I haven't yet learned the details about rooting/recovery for this phone.
I'll wait for your next update regarding daily use, and would love a more detailed step-by-step for installation if that's not too much trouble. I'm honestly loving those screenshots.
How about IMEI, BRK3 Vendor safe..?
Ok here is the detailed tutorial on how to install a GSI rom
1. First you need to wipe everything in TWRP. Just like you do, when you clean flash any rom
2. Than install the BRK3 vendor. Link is provided by the OP. It's a flashable zip file so just flash it like any other zip.
3. Flash the Endurance GSI kernel. Link is in the OP.
4. Next, download the GSI rom from the link in the OP. Remember to download the ARM 64 A-only variant.
5. Extract the files and you should get a . Img file. Copy that in the SD card
6. In the TWRP, goto install. Select flash image from the bottom right corner of your screen. Now browse the image file, that you copied and choose system image and install.
7. Boot to the system and than boot back to the recovery.
8. Now flash the magisk
9. If you try to install gapps, it will give an error regarding space. So just goto wipe -> advance wipe > system repartition > resize
After resize, you will be able to install gapps.
Flash gapps, automatic brightness fix ( link in the rom thread), AOD fix ( link in the rom thread) and reboot.
burninitup said:
Ok here is the detailed tutorial on how to install a GSI rom
1. First you need to wipe everything in TWRP. Just like you do, when you clean flash any rom
2. Than install the BRK3 vendor. Link is provided by the OP. It's a flashable zip file so just flash it like any other zip.
3. Flash the Endurance GSI kernel. Link is in the OP.
4. Next, download the GSI rom from the link in the OP. Remember to download the ARM 64 A-only variant.
5. Extract the files and you should get a . Img file. Copy that in the SD card
6. In the TWRP, goto install. Select flash image from the bottom right corner of your screen. Now browse the image file, that you copied and choose system image and install.
7. Boot to the system and than boot back to the recovery.
8. Now flash the magisk
9. If you try to install gapps, it will give an error regarding space. So just goto wipe -> advance wipe > system repartition > resize
After resize, you will be able to install gapps.
Flash gapps, automatic brightness fix ( link in the rom thread), AOD fix ( link in the rom thread) and reboot.
Click to expand...
Click to collapse
Thanks for the extra instruction man, will test this out soon.
burninitup said:
Ok here is the detailed tutorial on how to install a GSI rom
1. First you need to wipe everything in TWRP. Just like you do, when you clean flash any rom
2. Than install the BRK3 vendor. Link is provided by the OP. It's a flashable zip file so just flash it like any other zip.
3. Flash the Endurance GSI kernel. Link is in the OP.
4. Next, download the GSI rom from the link in the OP. Remember to download the ARM 64 A-only variant.
5. Extract the files and you should get a . Img file. Copy that in the SD card
6. In the TWRP, goto install. Select flash image from the bottom right corner of your screen. Now browse the image file, that you copied and choose system image and install.
7. Boot to the system and than boot back to the recovery.
8. Now flash the magisk
9. If you try to install gapps, it will give an error regarding space. So just goto wipe -> advance wipe > system repartition > resize
After resize, you will be able to install gapps.
Flash gapps, automatic brightness fix ( link in the rom thread), AOD fix ( link in the rom thread) and reboot.
Click to expand...
Click to collapse
Doesn't work. Stuck on boot logo, loading forever.
Zwulf said:
Doesn't work. Stuck on boot logo, loading forever.
Click to expand...
Click to collapse
me too dont know any fix
EDIT: Somehow i managed to boot the rom but sim won't get detected
Double tap and AOD - work correctly? On snap it does not work well
My Baseband version is now unknown
I have an SM-G960F and its german
EDIT:I just flashed the latest firmware from soldier and now sim card gets detected
Masterofchicken said:
My Baseband version is now unknown
I have an SM-G960F and its german
EDIT:I just flashed the latest firmware from soldier and now sim card gets detected
Click to expand...
Click to collapse
So camera isn't working ,root is still present with magisk and i couldn't disable it with the adb command so safetynet doesn't pass ,i'll say it's not really usable ?
Has anyone found a fix for getting stuck at the s9 logo?..wanting to move to GSI ROMs
I have tried this,
After flash GSI rom, reboot recovery, reboot system and I have bootloop with the first logo Galaxy S9. Can anybody please help me?
@arunrawat2112
Finally I was able to flash some roms but none of them work properly. Can you please help me?