Hi there,
I have version 026 and I want 027 how do I gingerDX v 027 on my phone?
stock kernel as well
1. Download the v07 from here.
2. Download module from http://www.mediafire.com/?86n454in0jdzyac
3. Copy downloaded file on your memry card.
4. Reboot to recovery.
5. Full wipe (data,cache,dalvik)
6. Flash the downloaded files.
7. Reboot and wait.
8. Nextime please read before asking
deedii said:
1. Download the v07 from here.
2. Download module from http://www.mediafire.com/?86n454in0jdzyac
3. Copy downloaded file on your memry card.
4. Reboot to recovery.
5. Full wipe (data,cache,dalvik)
6. Flash the downloaded files.
7. Reboot and wait.
8. Nextime please read before asking
Click to expand...
Click to collapse
do I delete v026?
how do I flash the downloaded files?
And what should I delete in order to preserve memory
Will it also work for stock kernel?
By flashing it will overwrite your old system.
You flash by the same instructions you made to get v26
I guess you have to read what is written here.
Your questions is all basic maybe take sometime to read this. It will teach you so much
Related
Hello guys I have black with stock rom I want to install custom rom CM9
Code:
http://forum.xda-developers.com/showthread.php?t=1650537
Install CM9 on black:
Instructions:
Download the FreeOptimusProject-xxx.zip
Backup your /data contents: contacts, apps, sms, etc. or backup via recovery
Enter CWM and:
- Select 'backup and restore -> Backup' (not necessary but recommended)
- Select 'wipe data/factory reset' (Obligatory)
- Select 'wipe cache partition' (Obligatory)
- Select 'advanced/wipe Dalvik cache' (Obligatory)
- Flash the FreeOptimusProject-xxx.zip. To do this, Select 'install zip from sdcard -> choose zip from sdcard' and select the FreeOptimusProject-xxx.zip
Reboot (first boot will take ~3 mins)
but I should install recovery mode first
Code:
http://forum.xda-developers.com/showthread.php?t=1098083
How to install recovery mode:
1. Extract ZIP-File to your Local Computer
2. Connect the Phone with USB-Debugging enabled
3. Run The File install_recovery.bat (on Windows Systems) or install_recovery.sh(on Linux Systems)
4. Grant Root Access on the Phone
also but I should get the root access first
but how i used gingerbreak but it doesn't success
in my previous phone I flashed other firmware then I rooted it but in black I don't know how to flash this fw (before,I was using kdz uploader) and what is the good fw for rooting then flashing new rom
please quickly
thnx in advance
hemo-ali said:
Hello guys I have black with stock rom I want to install custom rom CM9
Code:
http://forum.xda-developers.com/showthread.php?t=1650537
Install CM9 on black:
Instructions:
Download the FreeOptimusProject-xxx.zip
Backup your /data contents: contacts, apps, sms, etc. or backup via recovery
Enter CWM and:
- Select 'backup and restore -> Backup' (not necessary but recommended)
- Select 'wipe data/factory reset' (Obligatory)
- Select 'wipe cache partition' (Obligatory)
- Select 'advanced/wipe Dalvik cache' (Obligatory)
- Flash the FreeOptimusProject-xxx.zip. To do this, Select 'install zip from sdcard -> choose zip from sdcard' and select the FreeOptimusProject-xxx.zip
Reboot (first boot will take ~3 mins)
but I should install recovery mode first
Code:
http://forum.xda-developers.com/showthread.php?t=1098083
How to install recovery mode:
1. Extract ZIP-File to your Local Computer
2. Connect the Phone with USB-Debugging enabled
3. Run The File install_recovery.bat (on Windows Systems) or install_recovery.sh(on Linux Systems)
4. Grant Root Access on the Phone
also but I should get the root access first
but how i used gingerbreak but it doesn't success
in my previous phone I flashed other firmware then I rooted it but in black I don't know how to flash this fw (before,I was using kdz uploader) and what is the good fw for rooting then flashing new rom
please quickly
thnx in advance
Click to expand...
Click to collapse
search for 20o patched bin and fls files and flash them with smartflash and from there flash any ROM you like.
CM9 is not suitable as an everyday rom, try another one, personally I will recommend you CM7 or Zeus(thou I dont know if the have LTR support).
In face I rooted it by unlock root before then I flashed the cm9
I detected the errors then I re-flashed the stock rom with smart flash tool
but now I want to root again I can't
why???
also is cm7 stable and can I download it from cm website directly or where can I download it??
is cm7 supports rtl support(especially arabic)??
Is cm7 have thread in this forum??
Patched v20o comes with cwm recovery so from there you can flash any rom, yes you should.always get cm from official site or look for temasek kang in general forum.
FDN
re4lsk said:
Patched v20o comes with cwm recovery so from there you can flash any rom, yes you should.always get cm from official site or look for temasek kang in general forum.
FDN
Click to expand...
Click to collapse
hey I flashed v20O but unlock root doesn't success to root it why???
oh sorry i didn't download patched one
now I will download patched V20b(no matter which one)
I want it only to flash cm7 and in future cm9(when bugs are fixed by our heros)
thnx all wait for my feedback
I flashed it successfully thnx but when I used cm7 rom I don't have market and when I installed it Now I cannot add gmail account why??
Done I flashed the gapps zip file thnx
Sent from my LG-P970 using XDA
Well,
Code:
Model number
E15i
Android version
2.3.7
Baseband version
M76XX-TSNCJOLYM-53404015
Mem info
37MB/175MB
Mod version
GingerCruzt
Build number
GC84.246
That's the info on my phone.. It's rooted and all, could someone please explain me like to a 5 year old how to install this rom?
I'm good with computers, still bad with all those phones thingys.
Thanks in advance
i had the cyborgv6 rom its nice. as a cyborg rom to install should be like this:
First if you want make a back up with for ex. Titanium backup or something else.
1. if you dont have xrecovery or CWM recovery search and find them and install one of them. see here:
http://forum.xda-developers.com/showthread.php?t=974527 or
http://forum.xda-developers.com/showthread.php?t=881614
2. download the stock kernel rom and put it on sd card.
3. Reboot to xRecovery (click back button on ericsson logo)/ ClockWorkMod(touch the screen instead of click)
4. Factory Reset (Full wipe) ------> For new users who want to this rom.
5. Install custom zip
6. Choose zip from sdcard
7. Find your zip file, and flash it.
(* If you have any bugs, try full-wipe.) For first time installing CyBorg users, DO FULL WIPE, or you will stuck at the se white logo!!
8. reboot
see his page of previews version, the instructions are from here
http://forum.xda-developers.com/showthread.php?p=17850024#post17850024
if i helped you know...
arikos said:
i had the cyborgv6 rom its nice. as a cyborg rom to install should be like this:
First if you want make a back up with for ex. Titanium backup or something else.
1. if you dont have xrecovery or CWM recovery search and find them and install one of them. see here:
http://forum.xda-developers.com/showthread.php?t=974527 or
http://forum.xda-developers.com/showthread.php?t=881614
2. download the stock kernel rom and put it on sd card.
3. Reboot to xRecovery (click back button on ericsson logo)/ ClockWorkMod(touch the screen instead of click)
4. Factory Reset (Full wipe) ------> For new users who want to this rom.
5. Install custom zip
6. Choose zip from sdcard
7. Find your zip file, and flash it.
(* If you have any bugs, try full-wipe.) For first time installing CyBorg users, DO FULL WIPE, or you will stuck at the se white logo!!
8. reboot
see his page of previews version, the instructions are from here
http://forum.xda-developers.com/showthread.php?p=17850024#post17850024
if i helped you know...
Click to expand...
Click to collapse
oh, wow, seems I accidently a link, this is the right rom I was gonna install
http://forum.xda-developers.com/showthread.php?t=1576968
Are the instructions work the same? cause they have there a whole lot of files (Alfs Kernel Lastest v08a?)
same process! if you are in stock kernel(settings-about phone if its semc) just download only "Stock version rom in Attach Files " and follow the instructions
if i helped press, you know...
arikos said:
same process! if you are in stock kernel(settings-about phone if its semc) just download only "Stock version rom in Attach Files " and follow the instructions
if i helped press, you know...
Click to expand...
Click to collapse
which of the files for download there is the rom? and how do I install the other files?
in the page you gave go to:
{
Downloaded:
LX v.0.11c(Alfs) LX v.0.11(Stock)
LXv0.10-Alfs LXv0.10-Stock
LX V11 GOOGLE APPS LX V11(ALFS)LX V11(STOCK)
LX XG!N V8(Stock)
LX V10(alfs)LX V10 (Stock)
}
LX v.0.11(Stock) THIS is the ROM for stock kernel just download it
the attached files (SensorPatch.zip ...) you can download them IF you want to make it better
by same procedure as to install, "put them on sd card-go to recovery - install custom zip-Find your zip file, and flash it-reboot" but not make Factory Reset (Full wipe) its unnecessary.
By the way on instructions i gave, from the step 4 till 8 are in the recovery. to go there follow the step 3 "Reboot and go to xRecovery by (click back button on ericsson logo) or on ClockWorkMod(touch the screen when you see ericsson logo)" you must have one of them if you already have a custom rom installed "GingerCruzt"
Firstly, I have to declare that It's just a Compromising method, Means that it is not a perfect way to root your phone.
1. Rooted .411 Rom with CWM is needed first.
2. Download the ROM (scan the QR code to achieve thanks to sj8023ld) and Flashable CWM v7. Copy all of those zips in memory.If you want to delete system apps, just open the ROM zips with winrar and deleted the apps in system/app before you flash it.
3. Reboot to CWM and flash the ROM firstly, then the CWM v7.
4. Now open flashtool, go to flash mode, select .67 FTF and select only KERNEL and BASEBAND (exclude all other and remove the tics from WIPE DATA, WIPE CACHE, WIPE APPSLOG and tic no final verification ) thank to chinmoy32
5. Finally, you achieve the ROM Deodexed Rooted with CWM. But the reboot problem still existed when u edited system files. If u want to modify system files, u can try the two ways below.
1. Go back to the 411 kernel (see the TIPS 4 above,chang the .67 FTF to .411), after the modification finished do tips 4 again.
2. Make the system files flashable. then flash it using CWM.
You may choose one
tianzhisun said:
Firstly, I have to declare that It's just a Compromising method, Means that it is not a perfect way to root your phone.
1. Rooted .411 Rom with CWM is needed first.
2. Download the ROM (scan the QR code to achieve thanks to sj8023ld) and Flashable CWM v7. Copy all of those zips in memory.If you want to delete system apps, just open the ROM zips with winrar and deleted the apps in system/app before you flash it.
3. Reboot to CWM and flash the ROM firstly, then the CWM v7.
4. Now open flashtool, go to flash mode, select .67 FTF and select only KERNEL and BASEBAND (exclude all other and remove the tics from WIPE DATA, WIPE CACHE, WIPE APPSLOG and tic no final verification ) thank to chinmoy32
5. Finally, you achieve the ROM Deodexed Rooted with CWM. But the reboot problem still existed when u edited system files. If u want to modify system files, u can try the two ways below.
1. Go back to the 411 kernel (see the TIPS 4 above,chang the .67 FTF to .411), after the modification finished do tips 4 again.
2. Make the system files flashable. then flash it using CWM.
You may choose one
Click to expand...
Click to collapse
Are or will there any issues if you stay on the .411 kernel? thks
jameswood24 said:
Are or will there any issues if you stay on the .411 kernel? thks
Click to expand...
Click to collapse
If you choose to stay on the 411 kernel，you will meet no reboot issues，It works well. But you can not enjoy the benefits bring by the .67 kernel.
Dear All,
I am trying to update to kitkat but no luck, searched on net tried following things but no luck:
1) Root
a. tried with frameroot - error #9
b. tried with mt6589_rooter - dont know what happens
Even tried show here:
Micromax Canvas Turbo A250, Stock Rom V1 & V2, CWM Recovery and Rooting method MiUi Rom Planned
Read everything or risk a brick.
Standard disclaimer. Your warranty is now void. Use at your own risk. In other words, it is your choice to use this method; I am not responsible for any damage or problems. (Well this method will definitely work). Don’t do it if you don’t know what is rooting.
First ever rooting method.
Hey Friends…
This is the first ever thread dedicated to Micromax Canvas Turbo A250.
1. Specification: (Thanks to GSMArena)
http://www.gsmarena.com/micromax_canvas_turbo-5805.php
2. Price: 19000/- (I bought it from open market here in Bhopal MP)
3. Real Unboxing and review: (Thanks to Gogi and Youtube)
Actually I was thinking to review this phone by myself but when I found this. I 100% agreed with Gogi. He covered everything that I wanted to share with you friends.
http://www.youtube.com/watch?v=Zzr4TEN7Rvw
4. Stock Rom: (Thanks to NeedRom)
Unbrick your phone. Reset to factory Rom.
http://www.needrom.com/mobile/micromax-a250/
Steps for flashing:
a) You need to download Rom and SP Tool from above link. (Registration required)
// Update Link to Mediafire (Thankx to forever king for doing this)
His Original Thread: http://forum.xda-developers.com/show...php?p=47311042
Drivers-: http://www.mediafire.com/download/hl...rivers_x86.exe
stock firmware-: http://www.mediafire.com/download/de...k+firmware.rar
SP-: http://www.mediafire.com/download/8b...1312.0.139.zip
//
b) Download AND Install MTK Drivers http://www.medIafIre.com/download/nv...rivers_x86.exe Download Here).
c) Reboot your PC.
d) Unrar S9311_MP_IN_MMX_15_flasher_user.rar and unzip SP_Flash_Tool_exe_v3.1312.0.139.zip using any Unrar tool like peazip, 7zip, winrar.
e) You will have two folder S9311_MP_IN_MMX_15_flasher_user and SP_Flash_Tool_exe_v3.1312.0.139.
f) Switch of Your Phone. Make sure you have sufficient battery charged or use laptop to do this.
g) Open Flash_tool.exe from folder SP_Flash_Tool_exe_v3.1312.0.139.
h) Click Scatter-Loading button, choose MT6589_Android_scatter.txt file from folder S9311_MP_IN_MMX_15_flasher_user.
i) Wait file to be added into Flash Tool.
j) Choose Option->USB Model, click USB Model.
k) Choose Option->DA DownLoad All->Speed->High Speed, click High Speed.
l) Click Firmwave download and begin to download.
m) Software start downloading.
n) After few minutes you will see big green circle.
o) Done. Boot your phone.
5. Rooting Method
a) Install frameroot .apk
Place downloaded apk in to internal sd card and install it.
http://forum.xda-developers.com/atta...8&d=1380987775
b) select super su
c) click on Boromir
d) reboot.
e) Its Rooted.
f) Done.
6. CWM Recovery Link: http://www.mediafire.com/?33tcc9j7k3o4wgt
Patched Boot IMG Link: http://www.mediafire.com/download/4j...elaa5/boot.img
How to Flash CWM and Boot,img Mobile Uncle (Play Store App)
1. Place downloaded CWM Recover in to root of your internal storage of phone.
2. Download from play store.
3. Grand Root Permissions to it.
3. Select Update recovery.
4. Select the recovery that is in internal storage.
5. Flash.
6. Reboot.
7. Done Enjoy...
Obviously the recovery and patched boot also can be flashed via SP tool.
7. Modes: (I have not created the following MODs Thankx for the developers who worked for them)
a) http://www.mediafire.com/download/5l...cher_2.0.6.apk Xperia Launcher APK work with even on non rooted Device.
Following MODs must be flashed via CWM Recovery.
b) http://www.mediafire.com/download/dj...iaKeyboard.zip Xperia Keyboard with proper prediction and swipe feature.
c) http://www.mediafire.com/download/ja...ami_Sounds.zip Xperia Honami Sound.
8. Untouched Stock ROM Nandroid backup:- can be restore using CWM Recovery after unzipping the file and placing root of your phone's internal memory. (For Those who dont not want to use SP Tool due to some technical reasons.)
http://www.mediafire.com/download/w8...ockworkmod.zip
9. New updated stock ROM flashable via SP Tool. (Thankx to Manish). Stock ROM V2 : http://www.mediafire.com/download/de...asher_user.rar
10. Stock Boot: http://www.mediafire.com/download/ao...tjaly/boot.img
11. Stock Recovery: http://www.mediafire.com/download/8l...m/recovery.img
Now as I have compiled my own recovery.img then this post will include more MODS and custom roms. Cheers...
Press Thankx if I helped.
Custom Rom
1. MiUi Rom ported by me. (Link will be added soon)
Click to expand...
Click to collapse
But bad luck.
Can you guys please guide me how to update to kitkat? a bit step by step.
I will be very happy.
Regards,
Sandip
I create viper4android 2.5.0.5 zip to flash.
Steps:
1. Download zip
2. Put zip to device via cabel
3. Boot to TWRP(you need to have unlocked and rooted device)
4. Flash zip which you download
5. Wipe dalvik cache and reboot
You don't have to set linux to perrmisive, I didn't do it and it's work amazing.
Happy flashing
LINK:
https://drive.google.com/open?id=0B6NFfzOiPwTCaXl2WUEzUEpfbXM
what a bout setting?Is it cool to says "No" on Processing line?!
KarloH said:
I create viper4android 2.5.0.5 zip to flash.
Steps:
1. Download zip
2. Put zip to device via cabel
3. Boot to TWRP(you need to have unlocked and rooted device)
4. Flash zip which you download
5. Wipe dalvik cache and reboot
You don't have to set linux to perrmisive, I didn't do it and it's work amazing.
Happy flashing
LINK:
https://drive.google.com/open?id=0B6NFfzOiPwTCaXl2WUEzUEpfbXM
Click to expand...
Click to collapse
:good: