Hello guys I have black with stock rom I want to install custom rom CM9
Code:
http://forum.xda-developers.com/showthread.php?t=1650537
Install CM9 on black:
Instructions:
Download the FreeOptimusProject-xxx.zip
Backup your /data contents: contacts, apps, sms, etc. or backup via recovery
Enter CWM and:
- Select 'backup and restore -> Backup' (not necessary but recommended)
- Select 'wipe data/factory reset' (Obligatory)
- Select 'wipe cache partition' (Obligatory)
- Select 'advanced/wipe Dalvik cache' (Obligatory)
- Flash the FreeOptimusProject-xxx.zip. To do this, Select 'install zip from sdcard -> choose zip from sdcard' and select the FreeOptimusProject-xxx.zip
Reboot (first boot will take ~3 mins)
but I should install recovery mode first
Code:
http://forum.xda-developers.com/showthread.php?t=1098083
How to install recovery mode:
1. Extract ZIP-File to your Local Computer
2. Connect the Phone with USB-Debugging enabled
3. Run The File install_recovery.bat (on Windows Systems) or install_recovery.sh(on Linux Systems)
4. Grant Root Access on the Phone
also but I should get the root access first
but how i used gingerbreak but it doesn't success
in my previous phone I flashed other firmware then I rooted it but in black I don't know how to flash this fw (before,I was using kdz uploader) and what is the good fw for rooting then flashing new rom
please quickly
thnx in advance
hemo-ali said:
Hello guys I have black with stock rom I want to install custom rom CM9
Code:
http://forum.xda-developers.com/showthread.php?t=1650537
Install CM9 on black:
Instructions:
Download the FreeOptimusProject-xxx.zip
Backup your /data contents: contacts, apps, sms, etc. or backup via recovery
Enter CWM and:
- Select 'backup and restore -> Backup' (not necessary but recommended)
- Select 'wipe data/factory reset' (Obligatory)
- Select 'wipe cache partition' (Obligatory)
- Select 'advanced/wipe Dalvik cache' (Obligatory)
- Flash the FreeOptimusProject-xxx.zip. To do this, Select 'install zip from sdcard -> choose zip from sdcard' and select the FreeOptimusProject-xxx.zip
Reboot (first boot will take ~3 mins)
but I should install recovery mode first
Code:
http://forum.xda-developers.com/showthread.php?t=1098083
How to install recovery mode:
1. Extract ZIP-File to your Local Computer
2. Connect the Phone with USB-Debugging enabled
3. Run The File install_recovery.bat (on Windows Systems) or install_recovery.sh(on Linux Systems)
4. Grant Root Access on the Phone
also but I should get the root access first
but how i used gingerbreak but it doesn't success
in my previous phone I flashed other firmware then I rooted it but in black I don't know how to flash this fw (before,I was using kdz uploader) and what is the good fw for rooting then flashing new rom
please quickly
thnx in advance
Click to expand...
Click to collapse
search for 20o patched bin and fls files and flash them with smartflash and from there flash any ROM you like.
CM9 is not suitable as an everyday rom, try another one, personally I will recommend you CM7 or Zeus(thou I dont know if the have LTR support).
In face I rooted it by unlock root before then I flashed the cm9
I detected the errors then I re-flashed the stock rom with smart flash tool
but now I want to root again I can't
why???
also is cm7 stable and can I download it from cm website directly or where can I download it??
is cm7 supports rtl support(especially arabic)??
Is cm7 have thread in this forum??
Patched v20o comes with cwm recovery so from there you can flash any rom, yes you should.always get cm from official site or look for temasek kang in general forum.
FDN
re4lsk said:
Patched v20o comes with cwm recovery so from there you can flash any rom, yes you should.always get cm from official site or look for temasek kang in general forum.
FDN
Click to expand...
Click to collapse
hey I flashed v20O but unlock root doesn't success to root it why???
oh sorry i didn't download patched one
now I will download patched V20b(no matter which one)
I want it only to flash cm7 and in future cm9(when bugs are fixed by our heros)
thnx all wait for my feedback
I flashed it successfully thnx but when I used cm7 rom I don't have market and when I installed it Now I cannot add gmail account why??
Done I flashed the gapps zip file thnx
Sent from my LG-P970 using XDA
Related
Hi guys
I am newbie and till now I dint rooted my phone. Today I am going to root my phone and Flash ICS ROM. Please confirm the following steps are correct-
1) Download hardcore's Kernel with the ClockworkMod Recovery 2.5
2) Install Heimdall Suite 1.3.1
3) after doing all the settings and chosing correct options, flashing teh kernal -Heimdall Suite 1.3.1
4) Disable the lagfix
5) Backup your data via Titanium Backup
6) do a Nandroid backup in recovery, just for case
7) download and save build_14 and gapps_7.1 to your internal SDcard.
8) turn off your phone.
9) go to recovery via 3BC.
10) factory reset+wipe cache
11) flash the Devil_1.0_BFS.zip
12) flash the build_15 rom 0r rc4.1 rom
13) flash the gapps
14) Flash the faceunlock
15) factory reset+wipe cache
16) reboot
Is these steps are right. Please confirm so that I can do my >: porting
better check this out, its lot more simpler and detailed. best of luck.
( when i was newbie i used to visit there..... )
http://androidadvices(dot)com/info/samsung/galaxy-s-i9000/
Please Ignore
hey guys i was using checkrom and i flashed criskelo's ics rom via abyss kernel...it flashed fine then it got stuck on bootloop...cwm recovery is still working and i can still go to download mode...but i can'y flash anything except franco's r3 kernel...which i had on my sd card...i am not able to flash any rom or even abyss kernel....what options do i have??? the last thing i want to do is to use pc odin...and if that is the only option then which stock rom should i use? Thanks.
EDIT: got it fixed by flashing old franco kernel 10...then flashing abyss kernel...and back to checkrom... Thanks.
try again with the following steps (do the exact steps please) :
If you flashed criskelo's ics rom successfully and you're still in bootloop, reboot to recovery and do a factory reset/data wipe and reboot again.....
- Flash the stock LB1 from the same thread you had up there with Odin, then flash CF Root kernel for LB1 just like you did for LA4
- Boot the ROM, let it settle for 10-15 minutes, then check if you have full root (copy/paste files to /system)
- Reboot your ROM couple of times again and check again for full root access
- After leaving it for another 10-15 minutes, copy "AbyssNotekernel42RedTouchOriginalLogo" and "ICS_Stunner_1.4.19" to your internal sd card (MUST be the SAME zips as mentioned)
- Long-press power button and choose reboot to recovery
- Go to install zip from sd card --> choose zip from internal sd card --> choose "AbyssNotekernel42RedTouchOriginalLogo"
- Check if flashing is successful, it should say "Install from sd card complete" in the end
- Select Go back, then go to Advanced --> Reboot Recovery
- If you do not have the Redpill Touch Recovery then you choose the wrong zip, download the right one and repeat the previous three steps:
It should say "RedPill Touch Recovery by AF974" at the top and "CWM v5.5.0.4" at the bottom in white, the rest of options are in red
- Go to Wipe menu --> wipe data / factory reset, wipe cache and wipe dalvik cache
- Go to Install menu --> choose zip from internal sdcard --> "ICS_Stunner_1.4.19" --> Yes
- After flashing has completed, go to Reboot Menu --> reboot system
- Let the ROM settle for a few minutes, and then check for your root privileges
Hi guys, just got a Samsung Galaxy Note GT-N7000 dirty cheap from Hong Kong, and using it now in the states. I am a huge fan of rooting/flashing and stuff, so I decided to give myself a little test and see how long I can keep this phone stock. I lasted two days...haha.
So, I set out to see how to root this thing. After reading thread after thread, I learned about the wipe brick bug on stock Samsung kernels.
Now here's my question:
I want to use method 1A (to be safe) using this guide here, and it led me to this thread. Now here's where I get confused. Which kernel am I supposed to download and flash?
My Stock ROM system info (remember, this is from Hong Kong)
Model Number:
GT-N7000
Android Version:
4.0.3
Baseband Version:
N7000XXLR1
Kernel Version:
3.0.15-N7000ZSLPF-CL558440
[email protected] #3
SMP PREEMPT Tue May 15 15:39:39 KST 2012
Build Number:
IML74K.ZSLPF
Any for of enlightenment is greatly appreciated, thanks guys!
The easiest is flash a safe custom kernel that will be safe to wipe, provides root access, and has Clockworkmod Recovery. Below is how I setup my phone to flash Paranoidandroid. I started with a stock N7000XXLRT rom. I did install and run Triangle Away to later to remove the yellow triangle counter warning on boot. Largely cosmetic. Please check wikis of this speedmod kernel supports ICS 4.0.3.
If all you want is root and a safe kernel then you end with step 3 and apply Triangle Away.
1. Begin with a stock ICS rom on your Note.
2. Use Odin on the PC,select PDA, and flash speedmod-kernel-n7000-ics-k3-13-Odin.tar with usb cable. http://forum.xda-developers.com/showthread.php?t=1673072
3. After flashing speedmod kernel you will have root access, and a custom Clockworkmod Recovery in which to flash custom roms.
4. Get Paranoidandroid zip and Gapps zip from http://forum.xda-developers.com/showthread.php?t=1871713 . Copy the Paranoidandroid and Gapps zip files on your phone's internal sd card.
5. Backup efs folder just to be sure. Use kTool from Google Play or manually copy the EFS folder with Explorer+ also from Google Play. Copy the files to your pc.
6. Press power button, select reboot, reboot into recovery and go to backup and restore section and create a backup. Select go back and reboot.
6. Reboot into recovery (Clockworkmod Recovery) wipe cache partition, wipe data/factory reset, wipe dalvik cache (advanced).
7. From recovery, select install from zip from sd card. Select choose zip from internal sdcard. Select the Paranoid rom zip and flash. Do the same to flash Gapps zip. Go back and reboot.
*When flashing nightlies, no need to wipe cache, data, and dalvik. But install Gapps zip again in Recovery. You will need to set up your Google account again.
ginopunsalan said:
The easiest is flash a safe custom kernel that will be safe to wipe, provides root access, and has Clockworkmod Recovery. Below is how I setup my phone to flash Paranoidandroid. I started with a stock N7000XXLRT rom. I did install and run Triangle Away to later to remove the yellow triangle counter warning on boot. Largely cosmetic. Please check wikis of this speedmod kernel supports ICS 4.0.3.
If all you want is root and a safe kernel then you end with step 3 and apply Triangle Away.
1. Begin with a stock ICS rom on your Note.
2. Use Odin on the PC,select PDA, and flash speedmod-kernel-n7000-ics-k3-13-Odin.tar with usb cable. http://forum.xda-developers.com/show....php?t=1673072
3. After flashing speedmod kernel you will have root access, and a custom Clockworkmod Recovery in which to flash custom roms.
4. Get Paranoidandroid zip and Gapps zip from http://forum.xda-developers.com/showthread.php?t=1871713 . Copy the Paranoidandroid and Gapps zip files on your phone's internal sd card.
5. Backup efs folder just to be sure. Use kTool from Google Play or manually copy the EFS folder with Explorer+ also from Google Play. Copy the files to your pc.
6. Press power button, select reboot, reboot into recovery and go to backup and restore section and create a backup. Select go back and reboot.
6. Reboot into recovery (Clockworkmod Recovery) wipe cache partition, wipe data/factory reset, wipe dalvik cache (advanced).
7. From recovery, select install from zip from sd card. Select choose zip from internal sdcard. Select the Paranoid rom zip and flash. Do the same to flash Gapps zip. Go back and reboot.
*When flashing nightlies, no need to wipe cache, data, and dalvik. But install Gapps zip again in Recovery. You will need to set up your Google account again.
Click to expand...
Click to collapse
Thanks. So it doesn't matter that I am on Stock Samsung ICS ROM from Hong Kong?
And also, what version of Odin do I use, or does it not matter?
Yes. HK rom pretty much is the same kernel with local enhancements. The XXLR1 seems to be German or European. It should be ok. Again please verify if the speedmod kernel works with ICS 4.0.3. The site says ICS so I think it does.
I used Odin3-v1.85.zip. Make sure you have an excellent usb cable. Test the rig by copying large files between your pc and the Note internal sdcard.
Hi, few days ago I tried to flash CM11 and was disappointed with the no signal / no IMEI / no SIM problem...
I found a solution that worked perfectly for me :
1) Download and install latest recommended CWM recovery 6.0.4.5, easy to find on XDA
2) Download the latest 4.1 (not 4.3 or you will be stuck with KNOX security) firmware (on Sammobile for example).
3) Download latest CM11 nightly (and/or Paranoid GAPPS if you want them...) and copy the archive files on your SD Card then remove the SD Card from your phone.
4) Download latest modem for GT-I9305 (XXUEMK1).
5) Reboot in Download mode and flash CMW Recovery using Odin, Heimdall (tutorials on XDA...).
6) Reboot into CWM Recovery.
7) Wipe EVERY partition including those in "mounts and storage" section.
8) Reboot in Download mode.
9) Extract the downloaded Samsung package and flash the .tar.md5 file using Odin, Heimdall.
10) Reboot again in Download mode.
11) Flash the latest downloaded modem with Odin or Heimdall.
12) Power off your phone and then put back your SD Card with archive files on it.
13) Boot into CWM Recovery and do a Wipe Data/Factory reset and wipe /system partition in "mounts and storage" section then flash your archive files.
14) Reboot normally.
15) Enjoy.
All of these steps may not be necessary, you may just have to flash the latest ClockworkMod Recovery, wipe everything and try again to flash your CM11 ROM. But this is to be sure that the problem does not comes from somewhere else by restoring the phone at its factory state.
I know this is very long, but I think you could have broken some partitions with previous flashes, this guide helps you to repair bad things and you should flash all 4.4.x stuff using the latest ClockworkMod Recovery version.
I hope this will work for you guys, send feedbacks !
Guys after days of searching Internet to find a solution to fix WiFi reboot loop problem, I confirmed that this custom rom is the 100% guaranteed fix
It has fixed Samsung Tab SM-T110 which was restarting every time I enabled the WiFi. thanks to (CriskeloROM Custom Rom).
For those asking about the step-by-step Instructions, here you go:
Before you start, you should visit this thread (http://forum.xda-developers.com/showthread.php?t=2766612) and download some files:
1) Root Fix (https://mega.co.nz/#!tFYCkS4Y!W4piaGG5nxP9vlecFR4Z5E85q9-IcivEsBez2Tk_9-c)
2) Stock Recovery (https://mega.co.nz/#!cAZCTAbY!Mwt5N58yxNFzMDDkA5Y2qq5SDr8laAcEBK8CkXi2W_Q)
3) Philz Recovery (https://mega.co.nz/#!sUQyBIBb!NAEMOLl3GOcwj3KAHe6h2hXFYSOdw5fqUr-JNqLJzG0)
4) CriskeloROM (https://mega.co.nz/#!BUgXQKzQ!sa2GBqTG3mDpAquMlU6fCvFLT8lZjn_jvlZflVTU36w)
Now lets start:
1. Wipe Your Device:
1.1: Reboot in "Stock Recovery" Mode: "Volume-Up, Power, Home".
1.2: Wipe your device.
2. Install TWRP Custom Recovery:
2.1 Reboot in "Download" Mode.
2.2 Start Odin.
2.3 Use "AP" to install TWRP custom recovery.
2.4 Restart your Device when finished.
3. Install CriskeloROM Custom Rom:
3.1 Start the device.
3.2 Copy the three zip files after downloading is complete to SDCARD or Device: (Root Fix, Stock Recovery, CriskeloROM Rom) .
3.3 Reboot in "Recovery" Mode.
3.4 Select Install from Zip.
3.5 Use TWRP to browse to location where you copied the three files on your SDCARD or Device.
3.6 Select all zip files one by one.
3.7 Click Install and follow the on screen instructions (no restarts in-between) until all finished.
3.8 Reboot and Enjoy.
4. Install philz_touch (fix bootloop)
4.1 Start Odin.
4.2 Use "AP" to install philz_touch.
4.3 Restrat your Device when finished.
Good Luck !
philz_touch (fix bootloop) - no such thing afaik
khaledkoush said:
4. Install philz_touch (fix bootloop)
Click to expand...
Click to collapse
wtf ure talking about?
afaik there is no PhilZ on T110 which has the boot loop fixed.
Also the T110 does usually not reboot upon Wifi switch-on. That seems to be a individual problem with ure very T110.
khaledkoush said:
Guys after days of searching Internet to find a solution to fix WiFi reboot loop problem, I confirmed that this custom rom is the 100% guaranteed fix
It has fixed Samsung Tab SM-T110 which was restarting every time I enabled the WiFi. thanks to (CriskeloROM Custom Rom).
For those asking about the step-by-step Instructions, here you go:
Before you start, you should visit this thread (http://forum.xda-developers.com/showthread.php?t=2766612) and download some files:
1) Root Fix (https://mega.co.nz/#!tFYCkS4Y!W4piaGG5nxP9vlecFR4Z5E85q9-IcivEsBez2Tk_9-c)
2) Stock Recovery (https://mega.co.nz/#!cAZCTAbY!Mwt5N58yxNFzMDDkA5Y2qq5SDr8laAcEBK8CkXi2W_Q)
3) Philz Recovery (https://mega.co.nz/#!sUQyBIBb!NAEMOLl3GOcwj3KAHe6h2hXFYSOdw5fqUr-JNqLJzG0)
4) CriskeloROM (https://mega.co.nz/#!BUgXQKzQ!sa2GBqTG3mDpAquMlU6fCvFLT8lZjn_jvlZflVTU36w)
Now lets start:
1. Wipe Your Device:
1.1: Reboot in "Stock Recovery" Mode: "Volume-Up, Power, Home".
1.2: Wipe your device.
2. Install TWRP Custom Recovery:
2.1 Reboot in "Download" Mode.
2.2 Start Odin.
2.3 Use "AP" to install TWRP custom recovery.
2.4 Restart your Device when finished.
3. Install CriskeloROM Custom Rom:
3.1 Start the device.
3.2 Copy the three zip files after downloading is complete to SDCARD or Device: (Root Fix, Stock Recovery, CriskeloROM Rom) .
3.3 Reboot in "Recovery" Mode.
3.4 Select Install from Zip.
3.5 Use TWRP to browse to location where you copied the three files on your SDCARD or Device.
3.6 Select all zip files one by one.
3.7 Click Install and follow the on screen instructions (no restarts in-between) until all finished.
3.8 Reboot and Enjoy.
4. Install philz_touch (fix bootloop)
4.1 Start Odin.
4.2 Use "AP" to install philz_touch.
4.3 Restrat your Device when finished.
Good Luck !
Click to expand...
Click to collapse
Please give me new link for files ,because invalid all link!