Hi guys, just got a Samsung Galaxy Note GT-N7000 dirty cheap from Hong Kong, and using it now in the states. I am a huge fan of rooting/flashing and stuff, so I decided to give myself a little test and see how long I can keep this phone stock. I lasted two days...haha.
So, I set out to see how to root this thing. After reading thread after thread, I learned about the wipe brick bug on stock Samsung kernels.
Now here's my question:
I want to use method 1A (to be safe) using this guide here, and it led me to this thread. Now here's where I get confused. Which kernel am I supposed to download and flash?
My Stock ROM system info (remember, this is from Hong Kong)
Model Number:
GT-N7000
Android Version:
4.0.3
Baseband Version:
N7000XXLR1
Kernel Version:
3.0.15-N7000ZSLPF-CL558440
[email protected] #3
SMP PREEMPT Tue May 15 15:39:39 KST 2012
Build Number:
IML74K.ZSLPF
Any for of enlightenment is greatly appreciated, thanks guys!
The easiest is flash a safe custom kernel that will be safe to wipe, provides root access, and has Clockworkmod Recovery. Below is how I setup my phone to flash Paranoidandroid. I started with a stock N7000XXLRT rom. I did install and run Triangle Away to later to remove the yellow triangle counter warning on boot. Largely cosmetic. Please check wikis of this speedmod kernel supports ICS 4.0.3.
If all you want is root and a safe kernel then you end with step 3 and apply Triangle Away.
1. Begin with a stock ICS rom on your Note.
2. Use Odin on the PC,select PDA, and flash speedmod-kernel-n7000-ics-k3-13-Odin.tar with usb cable. http://forum.xda-developers.com/showthread.php?t=1673072
3. After flashing speedmod kernel you will have root access, and a custom Clockworkmod Recovery in which to flash custom roms.
4. Get Paranoidandroid zip and Gapps zip from http://forum.xda-developers.com/showthread.php?t=1871713 . Copy the Paranoidandroid and Gapps zip files on your phone's internal sd card.
5. Backup efs folder just to be sure. Use kTool from Google Play or manually copy the EFS folder with Explorer+ also from Google Play. Copy the files to your pc.
6. Press power button, select reboot, reboot into recovery and go to backup and restore section and create a backup. Select go back and reboot.
6. Reboot into recovery (Clockworkmod Recovery) wipe cache partition, wipe data/factory reset, wipe dalvik cache (advanced).
7. From recovery, select install from zip from sd card. Select choose zip from internal sdcard. Select the Paranoid rom zip and flash. Do the same to flash Gapps zip. Go back and reboot.
*When flashing nightlies, no need to wipe cache, data, and dalvik. But install Gapps zip again in Recovery. You will need to set up your Google account again.
ginopunsalan said:
The easiest is flash a safe custom kernel that will be safe to wipe, provides root access, and has Clockworkmod Recovery. Below is how I setup my phone to flash Paranoidandroid. I started with a stock N7000XXLRT rom. I did install and run Triangle Away to later to remove the yellow triangle counter warning on boot. Largely cosmetic. Please check wikis of this speedmod kernel supports ICS 4.0.3.
If all you want is root and a safe kernel then you end with step 3 and apply Triangle Away.
1. Begin with a stock ICS rom on your Note.
2. Use Odin on the PC,select PDA, and flash speedmod-kernel-n7000-ics-k3-13-Odin.tar with usb cable. http://forum.xda-developers.com/show....php?t=1673072
3. After flashing speedmod kernel you will have root access, and a custom Clockworkmod Recovery in which to flash custom roms.
4. Get Paranoidandroid zip and Gapps zip from http://forum.xda-developers.com/showthread.php?t=1871713 . Copy the Paranoidandroid and Gapps zip files on your phone's internal sd card.
5. Backup efs folder just to be sure. Use kTool from Google Play or manually copy the EFS folder with Explorer+ also from Google Play. Copy the files to your pc.
6. Press power button, select reboot, reboot into recovery and go to backup and restore section and create a backup. Select go back and reboot.
6. Reboot into recovery (Clockworkmod Recovery) wipe cache partition, wipe data/factory reset, wipe dalvik cache (advanced).
7. From recovery, select install from zip from sd card. Select choose zip from internal sdcard. Select the Paranoid rom zip and flash. Do the same to flash Gapps zip. Go back and reboot.
*When flashing nightlies, no need to wipe cache, data, and dalvik. But install Gapps zip again in Recovery. You will need to set up your Google account again.
Click to expand...
Click to collapse
Thanks. So it doesn't matter that I am on Stock Samsung ICS ROM from Hong Kong?
And also, what version of Odin do I use, or does it not matter?
Yes. HK rom pretty much is the same kernel with local enhancements. The XXLR1 seems to be German or European. It should be ok. Again please verify if the speedmod kernel works with ICS 4.0.3. The site says ICS so I think it does.
I used Odin3-v1.85.zip. Make sure you have an excellent usb cable. Test the rig by copying large files between your pc and the Note internal sdcard.
Related
hi all, i'm on GB 2.3.6 N700XXLC1 pre rooted ROM and trying to install CWM with no success. Downloaded CF-Root-SGN_XX_OXA_LC1-v5.3-CWM5.zip and execute already-rooted.bat (USB debug is flagged, zimage file inside zimage folder and all the drivers are installed), the procedure starts but remain stuck in PUSHING ZIMAGE...(waited 30 min but NOTHING!)
Q: is this right or i need to downgrade to a directly rootable rom?
Q2: someone could explain the simplest procedure (step by step) with ALL the softwares and files needed to update from LC1 to stunner? I'm not asking all the links but file names and steps.
This is the lis of all the files i have downloaded till now:
1. Odin 1.85
2. pre rooted LC1 rom (installed - root ok)
3. CF-Root-SGN_XX_OXA_LC1-v5.3-CWM5.zip (do i need it?)
4. I9220LP1-N7000-ICS-REPACK.tar (do i need it?)
5. ICS_Stunner_1.4.19.zip
PS i don't have mobile odin so please explain how to do with odin for pc
Thank you in advance and sorry for the incorrect english
I'm not very experienced with this, but someone just helped me the other day to go to ICS stunner from GB. I see you already installed a pre rooter ROM, thats good. After that I installed the ICS repack using the mobile odin app. Well worth the money seeing I installed the repack + the stunner rom within a couple of minutes.
mrmister80 said:
This is the lis of all the files i have downloaded till now:
1. Odin 1.85
2. pre rooted LC1 rom (installed - root ok)
3. CF-Root-SGN_XX_OXA_LC1-v5.3-CWM5.zip (do i need it?)
4. I9220LP1-N7000-ICS-REPACK.tar (do i need it?)
5. ICS_Stunner_1.4.19.zip
PS i don't have mobile odin so please explain how to do with odin for pc
Thank you in advance and sorry for the incorrect english
Click to expand...
Click to collapse
Since you are rooted already u don't require the 3rd step. Just check your root once!
Download mobile odin free from market or buy it if you can.....then flash the #4. file the LP1 repack through mobile odin. If u use pc odin it will give u yellow triangle and you will have to get rid of it using another app - triangle away.
Boot into LP1 repack and let the room settle.
Then reboot to recovery wipe data and cache and dalvik then flash stunner and clear cache dalvik and data and rebooot. Done
Useful links in my signature if you require.
thank you both!
1 bought mobile odin pro and flashed CF-root (only now i see it was not necessary)
2 flashed LP1 repack (mobile odin pro)
3 reboot in recovery and installed stunner from sd card
DONE!
what is dalvik?
now i'm on stunner..there are other updates i have to do? modems etc? I heard there is an update for the tablet mode..going to search for it
EDIT: i found this fix http://forum.xda-developers.com/showpost.php?p=24860868&postcount=3865 how install it? recovery>install from sd or via mobile odin pro?
EDIT 2: windows xp says USB not recognized when i connect the phone to pc with GB was ok, what can i do?
mrmister80 said:
thank you both!
1 bought mobile odin pro and flashed CF-root (only now i see it was not necessary)
2 flashed LP1 repack (mobile odin pro)
3 reboot in recovery and installed stunner from sd card
DONE!
what is dalvik?
now i'm on stunner..there are other updates i have to do? modems etc? I heard there is an update for the tablet mode..going to search for it
EDIT: i found this fix http://forum.xda-developers.com/showpost.php?p=24860868&postcount=3865 how install it? recovery>install from sd or via mobile odin pro?
EDIT 2: windows xp says USB not recognized when i connect the phone to pc with GB was ok, what can i do?
Click to expand...
Click to collapse
You can flash LP6 modem, works great for me..
There is no "update" to tablet mode, just a zip to enable it if you would like to use tablet mode and it should be flashed through recovery..
That fix for phone crash in 160 dpi should be flashed from recovery, and for general knowledge most of .zip files are flashed through recovery, odin mostly uses .tar files
IIRC there is a post with PC drivers in the Stunner thread, search for it and try it
thank you matius!
i'm on GB 2.3.6. LC1 pre rooted again because the USB was not recognized with my first stunner flash...now USB works perfectly, i want to clean install stunner with clear steps so please i need someone who confirm i'm doing the right steps:
1 reboot in recovery and wipe (data - cache - dalvik cache)
2 reboot phone open mobile odin and install LP1 repack from ext SD card
3 do i have to reboot in recovery and wipe data/cache/dalvik cache after LP1 installation?
4 reboot in recovery and install ICS Stunner 1.4.19 from ext SD card
5 do i have to reboot in recovery and wipe data/cache/dalvik cache after Stunner 1.4.19 installation?
6 reboot in recovery and install ICS Stunner 1.4.25 repack from ext sd card
7 after that i want to install LP6 modem and 160 dpi fix (recovery or mobile odin?)
thank you in advance
mrmister80 said:
thank you matius!
i'm on GB 2.3.6. LC1 pre rooted again because the USB was not recognized with my first stunner flash...now USB works perfectly, i want to clean install stunner with clear steps so please i need someone who confirm i'm doing the right steps:
1 reboot in recovery and wipe (data - cache - dalvik cache)
2 reboot phone open mobile odin and install LP1 repack from ext SD card
3 do i have to reboot in recovery and wipe data/cache/dalvik cache after LP1 installation? No Not required.
4 reboot in recovery and install ICS Stunner 1.4.19 from ext SD card
5 do i have to reboot in recovery and wipe data/cache/dalvik cache after Stunner 1.4.19 installation? No just wipe data/cache/dalvik cache after the installation in done in recovery and before rebooting the phone.
6 reboot in recovery and install ICS Stunner 1.4.25 repack from ext sd card No wait for the next build 1.4.26 to come. Uploading now.
7 after that i want to install LP6 modem and 160 dpi fix (recovery or mobile odin?) Recovery
thank you in advance
Click to expand...
Click to collapse
Infact you can skip the LP1 repack step...check here- http://forum.xda-developers.com/showthread.php?t=1614443...but if you are comfortable you can go with it...no harm
mrmister80 said:
thank you both!
1 bought mobile odin pro and flashed CF-root (only now i see it was not necessary)
2 flashed LP1 repack (mobile odin pro)
3 reboot in recovery and installed stunner from sd card
DONE!
what is dalvik?
now i'm on stunner..there are other updates i have to do? modems etc? I heard there is an update for the tablet mode..going to search for it
EDIT: i found this fix http://forum.xda-developers.com/showpost.php?p=24860868&postcount=3865 how install it? recovery>install from sd or via mobile odin pro?
EDIT 2: windows xp says USB not recognized when i connect the phone to pc with GB was ok, what can i do?
Click to expand...
Click to collapse
Most of your questions seem answered however I noticed nobody mentioned what the dalvik is. First, to get to it:
Reboot into recovery->advanced->wipe dalvik ( and choose yes of course ), that should be done anytime you change roms and I do it every time I update a rom
Info on what the Dalvik Cache is:
Dalvik cache is a program cache area for the program dalvik. Dalvik is a java based virtual machine that is the bases for running your programs (the ones that have the .apk extension). In order to make access times faster (because there's not JIT (just in time) compiler installed by default), the dalvik-cache is the result of dalvik doing a optimization of the running program. Sounds confusing. It's similar to the prefetch files in Windows.
abhisahara said:
Infact you can skip the LP1 repack step...check here- http://forum.xda-developers.com/showthread.php?t=1614443...but if you are comfortable you can go with it...no harm
Click to expand...
Click to collapse
1 reboot in recovery and wipe (data - cache - dalvik cache) + install Abyss Kernel 4.2
2 (skip LP1 repack installation ok?)
3 while in recovery install ICS Stunner 1.4.19 from ext SD card (once is done no wipes right?)
3 reboot in recovery and install ICS Stunner 1.4.26 repack (when will be released, thank you) from ext sd card (once is done no wipes right?)
4 reboot in recovery and install LP6 modem and 160 dpi fix
ok?
skillz9669 said:
Most of your questions seem answered however I noticed nobody mentioned what the dalvik is. First, to get to it:
Reboot into recovery->advanced->wipe dalvik ( and choose yes of course ), that should be done anytime you change roms and I do it every time I update a rom
Info on what the Dalvik Cache is:
Dalvik cache is a program cache area for the program dalvik. Dalvik is a java based virtual machine that is the bases for running your programs (the ones that have the .apk extension). In order to make access times faster (because there's not JIT (just in time) compiler installed by default), the dalvik-cache is the result of dalvik doing a optimization of the running program. Sounds confusing. It's similar to the prefetch files in Windows.
Click to expand...
Click to collapse
very clear, thanks
mrmister80 said:
1 reboot in recovery and wipe (data - cache - dalvik cache) + install Abyss Kernel 4.2 having the redpill touch recovery > reboot recovery
2 (skip LP1 repack installation ok?) Yup
3 while in recovery install ICS Stunner 1.4.19 from ext SD card (once is done no wipes right?) Directly flash the ICS Stunner 1.4.26 , download from the Stunner thread
3 reboot in recovery and install ICS Stunner 1.4.26 repack (when will be released, thank you) from ext sd card (once is done no wipes right?) Not required
4 reboot in recovery and install LP6 modem and 160 dpi fix Yeah
ok?
very clear, thanks
Click to expand...
Click to collapse
Hope this helps!!
Hello guys I have black with stock rom I want to install custom rom CM9
Code:
http://forum.xda-developers.com/showthread.php?t=1650537
Install CM9 on black:
Instructions:
Download the FreeOptimusProject-xxx.zip
Backup your /data contents: contacts, apps, sms, etc. or backup via recovery
Enter CWM and:
- Select 'backup and restore -> Backup' (not necessary but recommended)
- Select 'wipe data/factory reset' (Obligatory)
- Select 'wipe cache partition' (Obligatory)
- Select 'advanced/wipe Dalvik cache' (Obligatory)
- Flash the FreeOptimusProject-xxx.zip. To do this, Select 'install zip from sdcard -> choose zip from sdcard' and select the FreeOptimusProject-xxx.zip
Reboot (first boot will take ~3 mins)
but I should install recovery mode first
Code:
http://forum.xda-developers.com/showthread.php?t=1098083
How to install recovery mode:
1. Extract ZIP-File to your Local Computer
2. Connect the Phone with USB-Debugging enabled
3. Run The File install_recovery.bat (on Windows Systems) or install_recovery.sh(on Linux Systems)
4. Grant Root Access on the Phone
also but I should get the root access first
but how i used gingerbreak but it doesn't success
in my previous phone I flashed other firmware then I rooted it but in black I don't know how to flash this fw (before,I was using kdz uploader) and what is the good fw for rooting then flashing new rom
please quickly
thnx in advance
hemo-ali said:
Hello guys I have black with stock rom I want to install custom rom CM9
Code:
http://forum.xda-developers.com/showthread.php?t=1650537
Install CM9 on black:
Instructions:
Download the FreeOptimusProject-xxx.zip
Backup your /data contents: contacts, apps, sms, etc. or backup via recovery
Enter CWM and:
- Select 'backup and restore -> Backup' (not necessary but recommended)
- Select 'wipe data/factory reset' (Obligatory)
- Select 'wipe cache partition' (Obligatory)
- Select 'advanced/wipe Dalvik cache' (Obligatory)
- Flash the FreeOptimusProject-xxx.zip. To do this, Select 'install zip from sdcard -> choose zip from sdcard' and select the FreeOptimusProject-xxx.zip
Reboot (first boot will take ~3 mins)
but I should install recovery mode first
Code:
http://forum.xda-developers.com/showthread.php?t=1098083
How to install recovery mode:
1. Extract ZIP-File to your Local Computer
2. Connect the Phone with USB-Debugging enabled
3. Run The File install_recovery.bat (on Windows Systems) or install_recovery.sh(on Linux Systems)
4. Grant Root Access on the Phone
also but I should get the root access first
but how i used gingerbreak but it doesn't success
in my previous phone I flashed other firmware then I rooted it but in black I don't know how to flash this fw (before,I was using kdz uploader) and what is the good fw for rooting then flashing new rom
please quickly
thnx in advance
Click to expand...
Click to collapse
search for 20o patched bin and fls files and flash them with smartflash and from there flash any ROM you like.
CM9 is not suitable as an everyday rom, try another one, personally I will recommend you CM7 or Zeus(thou I dont know if the have LTR support).
In face I rooted it by unlock root before then I flashed the cm9
I detected the errors then I re-flashed the stock rom with smart flash tool
but now I want to root again I can't
why???
also is cm7 stable and can I download it from cm website directly or where can I download it??
is cm7 supports rtl support(especially arabic)??
Is cm7 have thread in this forum??
Patched v20o comes with cwm recovery so from there you can flash any rom, yes you should.always get cm from official site or look for temasek kang in general forum.
FDN
re4lsk said:
Patched v20o comes with cwm recovery so from there you can flash any rom, yes you should.always get cm from official site or look for temasek kang in general forum.
FDN
Click to expand...
Click to collapse
hey I flashed v20O but unlock root doesn't success to root it why???
oh sorry i didn't download patched one
now I will download patched V20b(no matter which one)
I want it only to flash cm7 and in future cm9(when bugs are fixed by our heros)
thnx all wait for my feedback
I flashed it successfully thnx but when I used cm7 rom I don't have market and when I installed it Now I cannot add gmail account why??
Done I flashed the gapps zip file thnx
Sent from my LG-P970 using XDA
hey guys i was using checkrom and i flashed criskelo's ics rom via abyss kernel...it flashed fine then it got stuck on bootloop...cwm recovery is still working and i can still go to download mode...but i can'y flash anything except franco's r3 kernel...which i had on my sd card...i am not able to flash any rom or even abyss kernel....what options do i have??? the last thing i want to do is to use pc odin...and if that is the only option then which stock rom should i use? Thanks.
EDIT: got it fixed by flashing old franco kernel 10...then flashing abyss kernel...and back to checkrom... Thanks.
try again with the following steps (do the exact steps please) :
If you flashed criskelo's ics rom successfully and you're still in bootloop, reboot to recovery and do a factory reset/data wipe and reboot again.....
- Flash the stock LB1 from the same thread you had up there with Odin, then flash CF Root kernel for LB1 just like you did for LA4
- Boot the ROM, let it settle for 10-15 minutes, then check if you have full root (copy/paste files to /system)
- Reboot your ROM couple of times again and check again for full root access
- After leaving it for another 10-15 minutes, copy "AbyssNotekernel42RedTouchOriginalLogo" and "ICS_Stunner_1.4.19" to your internal sd card (MUST be the SAME zips as mentioned)
- Long-press power button and choose reboot to recovery
- Go to install zip from sd card --> choose zip from internal sd card --> choose "AbyssNotekernel42RedTouchOriginalLogo"
- Check if flashing is successful, it should say "Install from sd card complete" in the end
- Select Go back, then go to Advanced --> Reboot Recovery
- If you do not have the Redpill Touch Recovery then you choose the wrong zip, download the right one and repeat the previous three steps:
It should say "RedPill Touch Recovery by AF974" at the top and "CWM v5.5.0.4" at the bottom in white, the rest of options are in red
- Go to Wipe menu --> wipe data / factory reset, wipe cache and wipe dalvik cache
- Go to Install menu --> choose zip from internal sdcard --> "ICS_Stunner_1.4.19" --> Yes
- After flashing has completed, go to Reboot Menu --> reboot system
- Let the ROM settle for a few minutes, and then check for your root privileges
Hi, few days ago I tried to flash CM11 and was disappointed with the no signal / no IMEI / no SIM problem...
I found a solution that worked perfectly for me :
1) Download and install latest recommended CWM recovery 6.0.4.5, easy to find on XDA
2) Download the latest 4.1 (not 4.3 or you will be stuck with KNOX security) firmware (on Sammobile for example).
3) Download latest CM11 nightly (and/or Paranoid GAPPS if you want them...) and copy the archive files on your SD Card then remove the SD Card from your phone.
4) Download latest modem for GT-I9305 (XXUEMK1).
5) Reboot in Download mode and flash CMW Recovery using Odin, Heimdall (tutorials on XDA...).
6) Reboot into CWM Recovery.
7) Wipe EVERY partition including those in "mounts and storage" section.
8) Reboot in Download mode.
9) Extract the downloaded Samsung package and flash the .tar.md5 file using Odin, Heimdall.
10) Reboot again in Download mode.
11) Flash the latest downloaded modem with Odin or Heimdall.
12) Power off your phone and then put back your SD Card with archive files on it.
13) Boot into CWM Recovery and do a Wipe Data/Factory reset and wipe /system partition in "mounts and storage" section then flash your archive files.
14) Reboot normally.
15) Enjoy.
All of these steps may not be necessary, you may just have to flash the latest ClockworkMod Recovery, wipe everything and try again to flash your CM11 ROM. But this is to be sure that the problem does not comes from somewhere else by restoring the phone at its factory state.
I know this is very long, but I think you could have broken some partitions with previous flashes, this guide helps you to repair bad things and you should flash all 4.4.x stuff using the latest ClockworkMod Recovery version.
I hope this will work for you guys, send feedbacks !
These are the problems. I did a clean flash and cleared the cache partition, and did a factory reset.
1. No notifications appear at all. Even when I have incoming mail and so on, no new notifications appear in the main bar. I only know things are happening when I check individual apps.
2. I have no settings tiles at all in the pull down quick settings. How do I add to this?
3. The default browser cannot be used. When I click on the icon, it opens to a blank screen and closes within half a second. It never stays open.
4. I can't boot into recovery at all. I've installed clockworkmod via Rom manager, but I cannot boot into it, nor can I use the volume up+home+power combo to reach it.
5. The home button doesn't respond at all.
Can anyone help?
Try booting into download mode and flash a stock rom via odin.
1) take titanium backup of the apps
2) copy internal SD data to PC
3) download KK kernel depending on what recovery you want i.e bauner kernel for cm/kitkat for cwm recovery and raw kernel for twrp.
4) download Odin format kernel (.tar) from bauners kernel thread (its the kernel for touchwiz jb) and keep it on PC.
3) download a different ROM and transfer with the desired kernel to SD card and external SD.
[ we are transferring it to both SD cards in case you are not able to boot to recovery and may have to flash a whole ROM to get it back ]
8) power off and put in download mode by pressing power+home+volume down
9) connect to computer and open Odin and select the tar file i.e the bauner jb kernel in PDA and flash, it will show kernel and successful.
10) once you see the galaxy note logo with yellow triangle remove the battery and don't let the device boot into ROM.
11) put the battery back and boot the device into recovery by power+home+ volume up. if it doesn't boot into recovery then try again.
12) once you are in recovery flash the KK kernel.
13) do factory data reset, wipe cache, dalvik cache and format system.
14) flash a ROM other than PA and gapps if required.
15) reboot
16) use triangle away app to get rid of the flash counter and triangle
these are the steps I followed and was able to successfully flash ROM without losing any data.
follow only if you know what you are doing. I am not responsible if you lose data or mess up your device.
Hope it helps
thank you very much
REVENGE SOLVES EVERYTHING
tysonraylee said:
1) take titanium backup of the apps
2) copy internal SD data to PC
3) download KK kernel depending on what recovery you want i.e bauner kernel for cm/kitkat for cwm recovery and raw kernel for twrp.
4) download Odin format kernel (.tar) from bauners kernel thread (its the kernel for touchwiz jb) and keep it on PC.
3) download a different ROM and transfer with the desired kernel to SD card and external SD.
[ we are transferring it to both SD cards in case you are not able to boot to recovery and may have to flash a whole ROM to get it back ]
8) power off and put in download mode by pressing power+home+volume down
9) connect to computer and open Odin and select the tar file i.e the bauner jb kernel in PDA and flash, it will show kernel and successful.
10) once you see the galaxy note logo with yellow triangle remove the battery and don't let the device boot into ROM.
11) put the battery back and boot the device into recovery by power+home+ volume up. if it doesn't boot into recovery then try again.
12) once you are in recovery flash the KK kernel.
13) do factory data reset, wipe cache, dalvik cache and format system.
14) flash a ROM other than PA and gapps if required.
15) reboot
16) use triangle away app to get rid of the flash counter and triangle
these are the steps I followed and was able to successfully flash ROM without losing any data.
follow only if you know what you are doing. I am not responsible if you lose data or mess up your device.
Hope it helps
thank you very much
REVENGE SOLVES EVERYTHING
Click to expand...
Click to collapse
can i use this method too if i had problem with storage can't detected after flashing KK ROM??