Database Develop

can someone help? i think i have bricked my optimus x2

Hi everyone,
My x2 is a vodafone, imei unlocked, stock 2.2 and CWM.
Im in the USA now and im using an iphone here so i wanted to update the x2 while not using it.
I read that lg will update trhe x2 to ICS and i had a pending update on my phone which i couldnt install due to a CWM.. Thinking it might be the ICS i went ahead and removed the CWM.
I removed CWM with "r1-stockrecovery-2x-unsigned", This did allowed me to boot into stock recovery. backed up all my data, did a factory reset and looked for update via wifi.
it found the update, downloaded (it was a small file, so no ics i assume), rebooted it self to install the update and thats it.
Now it boots to the LG logo and it stays there.
power Vol- goes to recovery for a brief moment (15 secs or so) and then back to LG logo.
What i have tryed so far to no avail: http://forum.xda-developers.com/showthread.php?t=1457582&page=2
Uninstalled all LG drivers and software from system, W7 64 bit.
I have downloaded 2x-nvflashdrivers and 2x-v10b-1300166062-nvflash
My comp detects the phone while in recovery mode, but wont take those drivers, hence NVflash cant detect the phone.. Once the phone goes out of recovery more my comp no longer sees the phone as connected.
I know its a lot to read but wanted to clarify in detail as much as i could so we all are in the same page.

UNBRICKED P990 - optimus X2
FIXED!!!
Thanks to a guy on you tube for directions, seach for user "iPhoneIac" tittle "LG Optimus 2x - How to flash to stock rom"
Program used:
SmartFlash P990
SmartFlash drivers, if u see modem driver not working under windows try to do the flash anyways.
Youll need ISO and FLS file as well. I found an open european set.
i can post links but im not sure if its allowed here, if it is let me know and ill post them so others can benefit from it.
Now that i got the phone working i can keep experimenting, i know how to unbrick it now

kamale0n said:
FIXED!!!
Thanks to a guy on you tube for directions, seach for user "iPhoneIac" tittle "LG Optimus 2x - How to flash to stock rom"
Program used:
SmartFlash P990
SmartFlash drivers, if u see modem driver not working under windows try to do the flash anyways.
Youll need ISO and FLS file as well. I found an open european set.
i can post links but im not sure if its allowed here, if it is let me know and ill post them so others can benefit from it.
Now that i got the phone working i can keep experimenting, i know how to unbrick it now
Click to expand...
Click to collapse
Good news for you buddy ^__^
Sent from my LG-P990 using xda premium

LG P990 thinks it's P999

Hi,
I followed al instructions to restore an LG P999 that was an big mistake, im trying for hours to get it back to p990 but any flash method failed (smartflash p990 won't connect with my phone by holding correct buttons) every custom rom for p990 fails to install.
I really don't now what to do anymore. Hope you guys can help (Ooh and i can't find nvflash rescue toolkit)
I'm from the netherlands, sorry for bad english...

Are the drivers installed correctly ?
Do you get any errors while trying to install a custom rom?
Have you tried a full whipe before installing a custom rom?
Any extra information you could give is usefull.
I've been in the same situation (or atleast a similar one) before and for me a whipe worked to get custom roms to install again.
By the way, i'm also from the netherlands so if you'd rather discuss this in Dutch you may also PM me.

yeah!
After trying this thread: http://forum.xda-developers.com/showthread.php?t=1007825
The LG became an P990 again Then I installed an dutch android source (with smartflash, it did finaly work after the thread above) and everything is working as normal again! So I went from p990 to p999 to p990
Thanks to this awsome forum!
IT IS POSSIBLE TO GO FROM P999 (G2X) to P990 And from P990 to p999

Bad baseband and ? battery

i got my hands on what i though was initially a g2x p999 with a bad baseband and ? in the battery symbol. i've unbricked a lot of those in the past so i figured this one was no different. after a couple failed attempts i finally figured out i have a p990 o2x.
i was told in the g2x section that the steps to restore are the same but with a different kdz file.
is this true? if so what is the latest kdz for the o2x?
oh, and will the o2x work in the states on tmo?

blackbeasst said:
i got my hands on what i though was initially a g2x p999 with a bad baseband and ? in the battery symbol. i've unbricked a lot of those in the past so i figured this one was no different. after a couple failed attempts i finally figured out i have a p990 o2x.
i was told in the g2x section that the steps to restore are the same but with a different kdz file.
is this true? if so what is the latest kdz for the o2x?
oh, and will the o2x work in the states on tmo?
Click to expand...
Click to collapse
first I would advise to check that it is a P990 (O2X) and not a G2X.
then you have to smartflash a Baseband...do you have the software upgrade screen when you press the volume+ and volume- buttons simultaneously when you connect to your laptop?if yes, that means you can have the flashing of BB directly. you dont need the kdz method. if your answer is no, then you will have to go through the kdz method.
the latest version depends on the region....presently the most popular ones in GB are V20S.
if you can switch on the device and it works, just try the LG update tool and LG support will de the rest. then if you need, you can root the device and then CWM and all that can follow.
I would advice that you should start with the LG update tool.....(if your device starts normally)
Hope it helps you

SREEPRAJAY said:
first I would advise to check that it is a P990 (O2X) and not a G2X.
then you have to smartflash a Baseband...do you have the software upgrade screen when you press the volume+ and volume- buttons simultaneously when you connect to your laptop?if yes, that means you can have the flashing of BB directly. you dont need the kdz method. if your answer is no, then you will have to go through the kdz method.
the latest version depends on the region....presently the most popular ones in GB are V20S.
if you can switch on the device and it works, just try the LG update tool and LG support will de the rest. then if you need, you can root the device and then CWM and all that can follow.
I would advice that you should start with the LG update tool.....(if your device starts normally)
Hope it helps you
Click to expand...
Click to collapse
i got it working late yesterday.
yeah i knew something was up when the normal g2x flashes weren't working. so i looked at the sticker under the battery, like i should have to begin with, and saw the p990!
all is well with it now........except i see that the o2x does not have 4g capabilities?

That's right. No 4g. It does have quad band, though, so your device will work in the US.
Sent from my LG-P990 using xda premium

[Q] S/W Upgrade to ICS fail

Hi, today i tried to update my LG Optimus 2x to ICS through LG Update service. but middle of the update it stopped and said the phone is not supported how come? and now the logo "S/W please wait while upgrading" is showing and doesnt disappear have restarted and again again but nothing works.
So know its stuck on the S/W logo and i really want to update to ICS.
Please I need help fast
Thank you in advance

Update using smartflash, it's easier.

Smartflash to update to ICS
rashn said:
Update using smartflash, it's easier.
Click to expand...
Click to collapse
But how? i dont the steps . do you know? if so please post

have you tried searching the Optimus 2x Android Development section? You will find there all the answers and if something isn't clear the ask in the proper thread/section. good luck!

ICS
okay, i looked through some and found a solution, but there is still a problem.
Solution was using smartflash, and i've done everything right but when smartflash doesnt detect the mobile, and yes apx was correctly installed according to the instruction.. how do i make smartflash to detect my phone?
Thanks

its not too dificult to find permanent second thread in development section. and there is multifunctional solution for you http://forum.xda-developers.com/showthread.php?t=2020737

Hello, this exact same thing happened to me, don't worry, your phone isn't dead.
First you might wanna recover your phone so you can calm down a little by knowing that your phone is alright. To do that you have to look at the LG logo that appear when trying to turn on the phone, if it's white with white letters, you are on Gingerbread partition, if it's Red (kinda of pink) with white letters, then you have the ICS partition.
As soon as you see that, you have to download from this link: http://forum.xda-developers.com/showthread.php?t=1969797 a toolkit that will recover your phone so you can use it again. If you saw a white LG logo, then download the Gingerbread version of the toolkit, if you saw a red logo, then download the ICS version of the toolkit. To recover your phone just follow the instructions in that post and in the program.
After that, you can relax a little by know that your phone is ok. Know you might want to try using Smartflash to upgrade your phone to ICS.

I also had problems, when using Smartflash do update the files 1 by 1, mine stopped halfway through.
Still having wifi problems though

1. http://forum.xda-developers.com/showthread.php?t=2020737
2. http://forum.xda-developers.com/showthread.php?t=2007968 (Alternative: http://forum.xda-developers.com/showthread.php?t=2038868)

[Problem]LG D320N L70 Black screen problem after installing custom recovery

Hi, I'm new here and I have a problem with my phone. I searched for the resolve, but there was nothing that really helped. Also sorry for my english, it's not really good.
So I just have a problem with my phone, apps were stopped after I run them and when I tried to restart the phone I started to loop on boot. I managed to restore the kdz using LG Flash Tool 2014 and kdz named D280n10c_00_0111 (yeah, I know it is for another model but after typing my IMEI that is what I got).
I was happy and tried to get a CM 12 with Android Lolipop next because I felt confident that I have a kdz and can quickly reinstall if sth goes wrong. So at first I try to install flash CWM.
I did everything like that kid - sorry i can't give you link to YouTube so the name of the vid is "How to flash CWM RECOVERY on your LG L70" by Captain Techdog28 and ended up with black screen. Everything is working, the phone boot up, I can call someone or send a text, install apps and I can see what I am doing because I'm using [email protected] ver 1.2.
I'm not sure if I didn't do any mistake in commands when I was trying to install CWM.
I can't get recovery or Firmware Update screen so i can't use kdz too I guess.
I tried using LG L70 autopacher and installed TWRP too.
ROM Manager shows that I have installed Clockwork and TWRP
I don't really have any idea what I can do more to repair it. Can you guys help me in any way?
Thanks for any help you can give me.
EDIT: Oooops, I screw up more, now I can only use fastboot and nothin else.

LG L70 hard brick unbricking tut
Follow this thread and check my reply there. I have posted the whole process with links.
https://forum.xda-developers.com/android/help/help-bootloop-lg-l70-d320-t3304382#post70962321

L70 (D320n) Black screen part missing
Hi .
Black sreen problem
Part missing.
I ask someone to know what to say and their value.
Thanks in advance, I'm sorry for my English.
kepfeltoltes.eu/images/hdd1/2017/06/14/451help.jpg