Database Develop

can someone help? i think i have bricked my optimus x2

Hi everyone,
My x2 is a vodafone, imei unlocked, stock 2.2 and CWM.
Im in the USA now and im using an iphone here so i wanted to update the x2 while not using it.
I read that lg will update trhe x2 to ICS and i had a pending update on my phone which i couldnt install due to a CWM.. Thinking it might be the ICS i went ahead and removed the CWM.
I removed CWM with "r1-stockrecovery-2x-unsigned", This did allowed me to boot into stock recovery. backed up all my data, did a factory reset and looked for update via wifi.
it found the update, downloaded (it was a small file, so no ics i assume), rebooted it self to install the update and thats it.
Now it boots to the LG logo and it stays there.
power Vol- goes to recovery for a brief moment (15 secs or so) and then back to LG logo.
What i have tryed so far to no avail: http://forum.xda-developers.com/showthread.php?t=1457582&page=2
Uninstalled all LG drivers and software from system, W7 64 bit.
I have downloaded 2x-nvflashdrivers and 2x-v10b-1300166062-nvflash
My comp detects the phone while in recovery mode, but wont take those drivers, hence NVflash cant detect the phone.. Once the phone goes out of recovery more my comp no longer sees the phone as connected.
I know its a lot to read but wanted to clarify in detail as much as i could so we all are in the same page.

UNBRICKED P990 - optimus X2
FIXED!!!
Thanks to a guy on you tube for directions, seach for user "iPhoneIac" tittle "LG Optimus 2x - How to flash to stock rom"
Program used:
SmartFlash P990
SmartFlash drivers, if u see modem driver not working under windows try to do the flash anyways.
Youll need ISO and FLS file as well. I found an open european set.
i can post links but im not sure if its allowed here, if it is let me know and ill post them so others can benefit from it.
Now that i got the phone working i can keep experimenting, i know how to unbrick it now

kamale0n said:
FIXED!!!
Thanks to a guy on you tube for directions, seach for user "iPhoneIac" tittle "LG Optimus 2x - How to flash to stock rom"
Program used:
SmartFlash P990
SmartFlash drivers, if u see modem driver not working under windows try to do the flash anyways.
Youll need ISO and FLS file as well. I found an open european set.
i can post links but im not sure if its allowed here, if it is let me know and ill post them so others can benefit from it.
Now that i got the phone working i can keep experimenting, i know how to unbrick it now
Click to expand...
Click to collapse
Good news for you buddy ^__^
Sent from my LG-P990 using xda premium

[Q] S/W Upgrade to ICS fail

Hi, today i tried to update my LG Optimus 2x to ICS through LG Update service. but middle of the update it stopped and said the phone is not supported how come? and now the logo "S/W please wait while upgrading" is showing and doesnt disappear have restarted and again again but nothing works.
So know its stuck on the S/W logo and i really want to update to ICS.
Please I need help fast
Thank you in advance

Update using smartflash, it's easier.

Smartflash to update to ICS
rashn said:
Update using smartflash, it's easier.
Click to expand...
Click to collapse
But how? i dont the steps . do you know? if so please post

have you tried searching the Optimus 2x Android Development section? You will find there all the answers and if something isn't clear the ask in the proper thread/section. good luck!

ICS
okay, i looked through some and found a solution, but there is still a problem.
Solution was using smartflash, and i've done everything right but when smartflash doesnt detect the mobile, and yes apx was correctly installed according to the instruction.. how do i make smartflash to detect my phone?
Thanks

its not too dificult to find permanent second thread in development section. and there is multifunctional solution for you http://forum.xda-developers.com/showthread.php?t=2020737

Hello, this exact same thing happened to me, don't worry, your phone isn't dead.
First you might wanna recover your phone so you can calm down a little by knowing that your phone is alright. To do that you have to look at the LG logo that appear when trying to turn on the phone, if it's white with white letters, you are on Gingerbread partition, if it's Red (kinda of pink) with white letters, then you have the ICS partition.
As soon as you see that, you have to download from this link: http://forum.xda-developers.com/showthread.php?t=1969797 a toolkit that will recover your phone so you can use it again. If you saw a white LG logo, then download the Gingerbread version of the toolkit, if you saw a red logo, then download the ICS version of the toolkit. To recover your phone just follow the instructions in that post and in the program.
After that, you can relax a little by know that your phone is ok. Know you might want to try using Smartflash to upgrade your phone to ICS.

I also had problems, when using Smartflash do update the files 1 by 1, mine stopped halfway through.
Still having wifi problems though

1. http://forum.xda-developers.com/showthread.php?t=2020737
2. http://forum.xda-developers.com/showthread.php?t=2007968 (Alternative: http://forum.xda-developers.com/showthread.php?t=2038868)

[Q] LG Optimus 4x HD gets stuck on boot animation,please help

Hi All,
Sorry if this is a duplicate but everything I have seen at least has not helped me further.
I wanted to root my phone yesterday and everything (tutorial here with o4xr) the went well till it installed busy box where the computer froze and then shut itself down and so I tried to turn restart my phone normally. Now its stuck at the bit where the LG animation is and goes no further.
Here is what I have already tried:
Rerunning the o4xr/root method again
Hard Resetting (selected and running all options available)
LG Service App (windows) -> always fails on communicating with device... works up until that and I do see the SW Ugrade splash.
My version is the EURO Open v10h or something like that.
Please help me fix... This is the first phone I havent been able to root, any suggestions?

try flashing following this tut http://forum.xda-developers.com/showthread.php?t=2069723

Thanks
laufersteppenwolf said:
try flashing following this tut http://forum.xda-developers.com/showthread.php?t=2069723
Click to expand...
Click to collapse
It worked this time. I guess I was so stressed that I accidently downloaded the wrong firmware. Thanks alot for making me try that route again plus I have a backup now should this happen again.

elbuntu 101 said:
It worked this time. I guess I was so stressed that I accidently downloaded the wrong firmware. Thanks alot for making me try that route again plus I have a backup now should this happen again.
Click to expand...
Click to collapse
Nothing like a brick to freak you out with your brand new device, luckily you got it sorted
Sent from my LG-P880 using Tapatalk 2

Not hard brick, but soft brick. There is a huge difference. Just for your info.

from where can I download .kdz file and the main site is telling
ACCESS DENIED
http://csmgdl.lgmobile.com/swdata/WDLSW/LGP880/AAREBK/V10b_00/V10B_00.kdz
is there any other links for the .KDZ file to be download from
thank you

[Q] my phone is bricked guess beyond repair - help!!

1st ' thanx to all the dev. and people at XDA
2nd' thanks in advance for helping me with my problem, might be a little one but, just can seem to get it
Now coming to my problem - in the process of trying new roms and etc recently i successfully managed to get my optimus black to a point than it got stuck at the LG screen at boot and isnt responding. then as a NOOB to my little knowledge i have tried using smart flash which at first was successful partially means as i tried to get it in to CMW recovery it again got stuck. then i repeated the whole process but this time my phone is not booting meaning its stuck on LG screen again
and up on searching in XDA for results guess another person had the same problem but, to my .. it was not solved so people pls save my phone if can and thx

Ok try this
meenank said:
1st ' thanx to all the dev. and people at XDA
2nd' thanks in advance for helping me with my problem, might be a little one but, just can seem to get it
Now coming to my problem - in the process of trying new roms and etc recently i successfully managed to get my optimus black to a point than it got stuck at the LG screen at boot and isnt responding. then as a NOOB to my little knowledge i have tried using smart flash which at first was successful partially means as i tried to get it in to CMW recovery it again got stuck. then i repeated the whole process but this time my phone is not booting meaning its stuck on LG screen again
and up on searching in XDA for results guess another person had the same problem but, to my .. it was not solved so people pls save my phone if can and thx
Click to expand...
Click to collapse
Flash the GB .kdz not the ics with the flash tool
this will help
my phone froze a month ago like this and i got it working
and dont try cwm in ICS
ICS on OB is total BULL****
so i hope it works cheer!!
Try this link : http://forum.xda-developers.com/showthread.php?t=2144577

Problem when flashing recovery

Hello everyone! I have the lg l90 d405n and I've done everything right to put TWPR(root, unlock bootloader etc.). When i tried to reboot into recovery mode with flashify my phone turned black and i couldn't open the phone. My pc detects QHSUB_BULK and i understand that something bad happened. I went to repair it and they changed the motherboad of the phone. The think is that i don't understand why this think happens after done everything detailed and right and i really want to flash the cm13 into my phone. Now my warranty is void and i don't want to destroy my phone again. Can everybody have an answer on this. Thanks by the way!

LoXaR2 said:
Hello everyone! I have the lg l90 d405n and I've done everything right to put TWPR(root, unlock bootloader etc.). When i tried to reboot into recovery mode with flashify my phone turned black and i couldn't open the phone. My pc detects QHSUB_BULK and i understand that something bad happened. I went to repair it and they changed the motherboad of the phone. The think is that i don't understand why this think happens after done everything detailed and right and i really want to flash the cm13 into my phone. Now my warranty is void and i don't want to destroy my phone again. Can everybody have an answer on this. Thanks by the way!
Click to expand...
Click to collapse
Flashify gives you 2 choices to flash. 1 is recovery other is aboot i think.. U cant choose that wrong or phone bricks.. If they changed the motherboard check if your phone is still a d405n as some PPL got the wrong motherboard..

Warimation said:
Flashify gives you 2 choices to flash. 1 is recovery other is aboot i think.. U cant choose that wrong or phone bricks.. If they changed the motherboard check if your phone is still a d405n as some PPL got the wrong motherboard..
Click to expand...
Click to collapse
Thanks for the answer! It's still a d405n. I done that 2 times. The first one the phone got bricked and I by myself unbricked it but the second one hard bricked my phone and the motherboard had to be changed. I do every single thing right and I look again and again If I have a mistake to correct it. I don't understand where I am wrong. Or maybe that portion cant flash the recovery?

LoXaR2 said:
Thanks for the answer! It's still a d405n. I done that 2 times. The first one the phone got bricked and I by myself unbricked it but the second one hard bricked my phone and the motherboard had to be changed. I do every single thing right and I look again and again If I have a mistake to correct it. I don't understand where I am wrong. Or maybe that portion cant flash the recovery?
Click to expand...
Click to collapse
I cant help you more as im no developer.. I own a d405n too and I followed this tutorial and it worked fine.. I was On kit-kat but i dont think that have anything to do with your problem..
Forum.xda-developers.com/lg-l90/general/guide-unlock-bootloader-flash-custom-t2839690

Warimation said:
I cant help you more as im no developer.. I own a d405n too and I followed this tutorial and it worked fine.. I was On kit-kat but i dont think that have anything to do with your problem..
Forum.xda-developers.com/lg-l90/general/guide-unlock-bootloader-flash-custom-t2839690
Click to expand...
Click to collapse
I've done it twice with lollipop but i don't think that lollipop is the problem too! Maybe something has my phone and won't let me flash the recovery. Thank you by the way for answering!

Warimation said:
I cant help you more as im no developer.. I own a d405n too and I followed this tutorial and it worked fine.. I was On kit-kat but i dont think that have anything to do with your problem..
Forum.xda-developers.com/lg-l90/general/guide-unlock-bootloader-flash-custom-t2839690
Click to expand...
Click to collapse
By the way, I've done it with that guide you mentioned. To the attached files it says for my phone to download d405n_v10b_about.bin. It's for the version v10b and my phone was v20c. Maybe it's my software's problem?

LoXaR2 said:
By the way, I've done it with that guide you mentioned. To the attached files it says for my phone to download d405n_v10b_about.bin. It's for the version v10b and my phone was v20c. Maybe it's my software's problem?
Click to expand...
Click to collapse
thats why I said I was on kitkat..
nevertheless if you wanna try get to stock kitkat and work from there, at your own responsability, use this tutorial, it worked for me several times:
http://forum.xda-developers.com/lg-l90/general/guide-flash-stock-kdz-offline-lg-l90-t2803479
this for rooting:
http://forum.xda-developers.com/lg-l90/development/tool-dp-tools-manage-lg-device-t3084987

Warimation said:
thats why I said I was on kitkat..
nevertheless if you wanna try get to stock kitkat and work from there, at your own responsability, use this tutorial, it worked for me several times:
http://forum.xda-developers.com/lg-l90/general/guide-flash-stock-kdz-offline-lg-l90-t2803479
this for rooting:
http://forum.xda-developers.com/lg-l90/development/tool-dp-tools-manage-lg-device-t3084987
Click to expand...
Click to collapse
Ok I'll try this and see what happens(always at my own responsibility). Thanks for your help !!