Database Develop

[SOLVED] [Brick again]When return from CM7 SK7-2

when i use both LG updating tools in recovery mode and KDZ Updater to return back to Froyo v10B hong kong, both of them can flash until 100%. however, when the phone start, it have bootloop and i think it is brick.
does anyone have solutions for it?
I need help,thanks

sonicpeter said:
when i use both LG updating tools in recovery mode and KDZ Updater to return back to Froyo v10B hong kong, both of them can flash until 100%. however, when the phone start, it have bootloop and i think it is brick.
does anyone have solutions for it?
I need help,thanks
Click to expand...
Click to collapse
You have to factory reset it, use R&D Test tool. And please, anyone having issues regarding anything, CM7, V20a, flashing, etc. post on dedicated threads instead making one. 'Cause this was solved earlier on those threads. Unless a new issue arises...

This Tutorial: how to unbrick your phone doesn't work?
-CMIIW-

gabwerkz said:
You have to factory reset it, use R&D Test tool. And please, anyone having issues regarding anything, CM7, V20a, flashing, etc. post on dedicated threads instead making one. 'Cause this was solved earlier on those threads. Unless a new issue arises...
Click to expand...
Click to collapse
I am sorry that i dont know what R&D test tool is. I saw that the related thread have very few response that seems to have no help on that.
Moreover, I need to recover my phone ASAP since I just have this phone for my daily work.
Thanks

redy2006 said:
This Tutorial: how to unbrick your phone doesn't work?
-CMIIW-
Click to expand...
Click to collapse
Yes, I did try this method but doesnt help at all.
after 100%, it has a reboot, showing LG logo; then reboot, showing LG logo once again.
then, since the third reboot, however, it turns to a black screen and flashing light of the 4 buttons; and have this loop forever and no LG logo again.
sorry for my poor english.
thanks

sonicpeter said:
Yes, I did try this method but doesnt help at all.
after 100%, it has a reboot, showing LG logo; then reboot, showing LG logo once again.
then, since the third reboot, however, it turns to a black screen and flashing light of the 4 buttons; and have this loop forever and no LG logo again.
sorry for my poor english.
thanks
Click to expand...
Click to collapse
Try this one. It was also posted there. If you managed to unbrick it by his method, reflash again then with your V10b HK. Don't forget CS_EMERGENCY mode. or with CS_EMERGENCY, Try direct V10b flash. Trial and error.
http://forum.xda-developers.com/showpost.php?p=18740082&postcount=45

knzo said:
Attention: if you want to flash back a KDZ, make sure to wipe data in the recovery first.
Click to expand...
Click to collapse
That's what you should have done, I'm not sure what you should do now.

gabwerkz said:
Try this one. It was also posted there. If you managed to unbrick it by his method, reflash again then with your V10b HK. Don't forget CS_EMERGENCY mode. or with CS_EMERGENCY, Try direct V10b flash. Trial and error.
http://forum.xda-developers.com/showpost.php?p=18740082&postcount=45
Click to expand...
Click to collapse
thanks all of you, i have unbricked successfully by this method.

Nice.. Now you change your title with SOLVED.

redy2006 said:
Nice.. Now you change your title with SOLVED.
Click to expand...
Click to collapse
you have alwayz helped me. i have registered mainly because i wanted to say thanks to you
Guys the procedure is perfect just one suggestion...run windowsenabler.exe as administrator and everythng will be silky smooth just unbricked my phone

venky77 said:
you have alwayz helped me. i have registered mainly because i wanted to say thanks to you
Guys the procedure is perfect just one suggestion...run windowsenabler.exe as administrator and everythng will be silky smooth just unbricked my phone
Click to expand...
Click to collapse
Unbricking your phone - one of the best feelings one can ever experience .

In_a_state said:
Unbricking your phone - one of the best feelings one can ever experience .
Click to expand...
Click to collapse
Actually ...i love XDA tearing my phone to every single bit..learning how to edit roms and everything and testing on my own phone (coz i know how to unbrick nw ) hahahahaha...its fun...

[Q] Optimus black stuck on firmware update screen

The story so far...
Bought a new Optimus Black and gave it to my girlfriend for her birthday a couple of days ago. After playing with it for about an hour she put it down, I picked it up and decided to have a tinker. I installed Cyanogen mod 3.5.1 after rooting it with Gingerbreak. So far so good but I didn't really like the look of the ROM and the absence of a Market seemed like hassle so I used ClockworkMod to restore the backed up stock ROM.
It's still working fine but now I see there is an official update from inside the phone. I presume it's the upgrade to Android 2.3 so run it and reboot the phone. That's when it all goes wrong. I'm now stuck in the CWM recovery screen. I try all the options, following any online guides I can find that were supposed to have worked for people. I try restoring the backup, restoring cyanogen, clearing the cache, dalvik, everything but nothing happens and I keep booting back into the CWM recovery screen.
Next day I try the LGUnitedMobileDriver and the phone recovery option but despite trying several times I can get no further. A friend tried to use Odin to restore it but got no success. Finally, we tried restoring with a KDZ file with
KDZ_FW_UPD_EN, Windows Enabler and LG B2CTool and now the phone got stuck in yet another loop - a black screen with 'updating firmware'. The LEDs flash for a minute and it reboots and does the same again.
What's more, the phone will now no longer charge or turn on without being connected to the mains.
What are my options here?

Follow the tutorial given below.
http://forum.xda-developers.com/showthread.php?t=1275315

Thanks, but I've already tried that and it doesn't work. I'm forever stuck in the firmware update screen.

pickarooney said:
Thanks, but I've already tried that and it doesn't work. I'm forever stuck in the firmware update screen.
Click to expand...
Click to collapse
have you tried the CS_EMERGENCY option in R&D TOOLS? Wait I'll find the link..
Here >>> http://forum.xda-developers.com/showpost.php?p=18841596&postcount=8
http://forum.xda-developers.com/showpost.php?p=18740082&postcount=45
The CS_EMERGENCY is the only thing worked, he used a german V10A ROM. If you managed to unbrick it, you can flash it again with your desired KDZ, or use CS_EMERGENCY and flash directly your desired KDZ. TRIAL AND ERROR.

Emergency c-section... nope, I will try that now!

Said that it will get stuck at 4% but it is still flashing. Just wait for the phone to reboot by itself.

It just crashes with a fatal error as soon as it gets to the second tab (downloading) on both PCs I tried it on. I tried several KDZ files with the same result.

Does anyone know if it's possible to physically change the ROM on this phone and if it would be worth trying that before binning the thing?

pickarooney said:
Does anyone know if it's possible to physically change the ROM on this phone and if it would be worth trying that before binning the thing?
Click to expand...
Click to collapse
Does it have warranty? Why not RMA it, I think it has a hardware problem now since you mentioned it doesn't charge anymore. Also, have you tried a different USB cable?

The warranty gets voided as soon as you root or mod a phone and it's probably as expensive to get it fixed outside of warranty as to buy a new one.

pickarooney said:
The warranty gets voided as soon as you root or mod a phone and it's probably as expensive to get it fixed outside of warranty as to buy a new one.
Click to expand...
Click to collapse
Most of the time they change the board right away if it can't boot (as many as I've read) board was changed and none just revived the OS. So they won't know you rooted it. Just specify that they should contact you first before making any changes.

gabwerkz said:
Most of the time they change the board right away if it can't boot (as many as I've read) board was changed and none just revived the OS. So they won't know you rooted it. Just specify that they should contact you first before making any changes.
Click to expand...
Click to collapse
true.. you can just tell them that you received an update and upon getting it the phone wont boot anymore.. just dont tell them that you rooted it or tinkered it in any way.. i'm sure you'll be able to get your warranty that way..

darkzorn said:
true.. you can just tell them that you received an update and upon getting it the phone wont boot anymore.. just dont tell them that you rooted it or tinkered it in any way.. i'm sure you'll be able to get your warranty that way..
Click to expand...
Click to collapse
Well, that's exactly what I did so we'll see in two weeks if I get a fixed phone free of charge

pickarooney said:
Well, that's exactly what I did so we'll see in two weeks if I get a fixed phone free of charge
Click to expand...
Click to collapse
Fingers crossed for you !!!

pickarooney said:
Well, that's exactly what I did so we'll see in two weeks if I get a fixed phone free of charge
Click to expand...
Click to collapse
IT will mostly work..Good luck though and please do reply here and let us know if it worked..

[Q] LG Optimus 4x HD gets stuck on boot animation,please help

Hi All,
Sorry if this is a duplicate but everything I have seen at least has not helped me further.
I wanted to root my phone yesterday and everything (tutorial here with o4xr) the went well till it installed busy box where the computer froze and then shut itself down and so I tried to turn restart my phone normally. Now its stuck at the bit where the LG animation is and goes no further.
Here is what I have already tried:
Rerunning the o4xr/root method again
Hard Resetting (selected and running all options available)
LG Service App (windows) -> always fails on communicating with device... works up until that and I do see the SW Ugrade splash.
My version is the EURO Open v10h or something like that.
Please help me fix... This is the first phone I havent been able to root, any suggestions?

try flashing following this tut http://forum.xda-developers.com/showthread.php?t=2069723

Thanks
laufersteppenwolf said:
try flashing following this tut http://forum.xda-developers.com/showthread.php?t=2069723
Click to expand...
Click to collapse
It worked this time. I guess I was so stressed that I accidently downloaded the wrong firmware. Thanks alot for making me try that route again plus I have a backup now should this happen again.

elbuntu 101 said:
It worked this time. I guess I was so stressed that I accidently downloaded the wrong firmware. Thanks alot for making me try that route again plus I have a backup now should this happen again.
Click to expand...
Click to collapse
Nothing like a brick to freak you out with your brand new device, luckily you got it sorted
Sent from my LG-P880 using Tapatalk 2

Not hard brick, but soft brick. There is a huge difference. Just for your info.

from where can I download .kdz file and the main site is telling
ACCESS DENIED
http://csmgdl.lgmobile.com/swdata/WDLSW/LGP880/AAREBK/V10b_00/V10B_00.kdz
is there any other links for the .KDZ file to be download from
thank you

[Q] BIG Problem!!!! Help please

I think i've bricked my phone because it's stuck on lg sign....smart flash tools does not find nothing on communication setup and i don't know what to do. Please help me!
Sorry for my bad english

JoKeR[RO-VL] said:
I think i've bricked my phone because it's stuck on lg sign....smart flash tools does not find nothing on communication setup and i don't know what to do. Please help me!
Sorry for my bad english
Click to expand...
Click to collapse
How long did you wait? 1 minute or 10? Initial boot can take a bit.
Look at the threads:
http://forum.xda-developers.com/showthread.php?t=1111771
http://forum.xda-developers.com/showthread.php?t=1487105
There are some tutorials on un-bricking and fixing stuck installs.

SOLVED
I managed to flash ics stock again with smart flash tool Bricking the phone was my fault,I know
where I did wrong,but I came in this situation because after i've flashed izs occured an error over and over again: lg.setupwizard.apk stopped unnexpectedly.
Any ideas?

JoKeR[RO-VL] said:
I managed to flash ics stock again with smart flash tool Bricking the phone was my fault,I know
where I did wrong,but I came in this situation because after i've flashed izs occured an error over and over again: lg.setupwizard.apk stopped unnexpectedly.
Any ideas?
Click to expand...
Click to collapse
I've had glitches on occasion during install, but was always able to get back to recovery and re-install. Re-wiping is VERY important.
I think the important thing is that you were following a procedure, and because of that, you were able to identify where your error was and recover from it.
Welcome to the world of hacking!

Fully Hard Bricked Moto G xt1072 (Help) DX

So i have a Moto g xt1072 wich i got second hand.. i got it into recovery mode and eventually got it working, but it was really unstable, so i wanted to reflash the stock rom, because it looked like the current one on the phone was corrupted (i was running android 6.0) (btw i have a xt1068 as my daily driver, but i want this to work again)
So i started flashing http://forum.xda-developers.com/moto-g-lte/general/stock-6-0-marshmallow-europe-reteu-t3338075 <-this
but i had errors and it was failing multiple times.. so i looked up some tutorials, and most of them were unlocking the bootloader at the beginning, so i was unlocking and locking the bootloader trying to get the commands to work,
then i found a tutorial wich coppyd all of the commands at once, so i tried that.. screen went black..
Wont boot into recovery, 3sec method or 120 sec method, and connects to my pc as QHSUSB_BULK
luckily i made a picture of the recovery when i tried to flash:
http://imgur.com/8avCk3T
I think i may need to blank flash, but im not certain..
I would also like to find the firmware for this phone that wont brick it..
Can anyone help?
Need more info?
Please just ask me, i will respond immediately
i dont care what i need to do.. even if i need to hardwire (because im really good at those finicky things)
Thanks for reading XD

Same issue here. I flashed a stock image and something must've gone wrong at some point

hamzahrmalik said:
Same issue here. I flashed a stock image and something must've gone wrong at some point
Click to expand...
Click to collapse
you probably also flashed the vootloader and the bootanimation, these are known to give problems, but ive foubd a test point on the pcb which brings the phone in a les hard bricked state, but ive yet to find a method to unbrick the phone..
ill keep you posted

ora69 said:
you probably also flashed the vootloader and the bootanimation, these are known to give problems, but ive foubd a test point on the pcb which brings the phone in a les hard bricked state, but ive yet to find a method to unbrick the phone..
ill keep you posted
Click to expand...
Click to collapse
Sorry could you please explain. How can a phone be less hard bricked. Thanks
Sent from my A0001 using Tapatalk

hamzahrmalik said:
Sorry could you please explain. How can a phone be less hard bricked. Thanks
Sent from my A0001 using Tapatalk
Click to expand...
Click to collapse
okay, so there are different types of hardbricks, all act the same, but one is harder to unbrick than the other, there is qh usb bulk and qhas bulk with numbers behind it, search for force unbrick lg g2,
now the problem is, it should be easy to unbrick the phone at thsi point, but im not an expert in that and have no idea what to do now xD so i posted it on xda, but no one answered me.. xD hopefully this clears it up some more

ora69 said:
okay, so there are different types of hardbricks, all act the same, but one is harder to unbrick than the other, there is qh usb bulk and qhas bulk with numbers behind it, search for force unbrick lg g2,
now the problem is, it should be easy to unbrick the phone at thsi point, but im not an expert in that and have no idea what to do now xD so i posted it on xda, but no one answered me.. xD hopefully this clears it up some more
Click to expand...
Click to collapse
Oh ok I get you. Mines USB bulk 9000 or something i can't remmeber now
Sent from my A0001 using Tapatalk

ora69 said:
So i have a Moto g xt1072 wich i got second hand.. i got it into recovery mode and eventually got it working, but it was really unstable, so i wanted to reflash the stock rom, because it looked like the current one on the phone was corrupted (i was running android 6.0) (btw i have a xt1068 as my daily driver, but i want this to work again)
So i started flashing http://forum.xda-developers.com/moto-g-lte/general/stock-6-0-marshmallow-europe-reteu-t3338075 <-this
but i had errors and it was failing multiple times.. so i looked up some tutorials, and most of them were unlocking the bootloader at the beginning, so i was unlocking and locking the bootloader trying to get the commands to work,
then i found a tutorial wich coppyd all of the commands at once, so i tried that.. screen went black..
Wont boot into recovery, 3sec method or 120 sec method, and connects to my pc as QHSUSB_BULK
luckily i made a picture of the recovery when i tried to flash:
http://imgur.com/8avCk3T
I think i may need to blank flash, but im not certain..
I would also like to find the firmware for this phone that wont brick it..
Can anyone help?
Need more info?
Please just ask me, i will respond immediately
i dont care what i need to do.. even if i need to hardwire (because im really good at those finicky things)
Thanks for reading XD
Click to expand...
Click to collapse
So that link to another thread in XDA forum, I think I had a similar experience. I too have the XT1072 as I live in the UK. now here on XDA you have to be careful and ask 3 4 maybe 5 times before someone listens properly. I know it is hard for the devs with so many dumb noobs asking so many dumb questions, I include myself as a noob so no worries. Anyway to get to the point that link is not referring to our phone the XT1072. You should ignore LTE in your search criteria, it will always point you towards the 2015 model and believe you me all roms in my experience area very device specific. You need to simply put Moto G 2nd gen 2014 in search criteria when it comes to searching for custom recoverys and/or stock ROMS. The Titan.IMG is always a safe bet if I remember correctly, dont take my word for it, I have been known to have a memory like a sieve now and again, the problem with getting older, cache gets smaller and smaller, lol! Best of luck!

hamzahrmalik said:
Sorry could you please explain. How can a phone be less hard bricked. Thanks
Sent from my A0001 using Tapatalk
Click to expand...
Click to collapse
Read the beginning on this article: http://rootmyandroid.org/how-to-unbrick-your-android-device-the-ultimate-guide.html/
the bricked term is a common misconception for phones that still turn on..