I think i've bricked my phone because it's stuck on lg sign....smart flash tools does not find nothing on communication setup and i don't know what to do. Please help me!
Sorry for my bad english
JoKeR[RO-VL] said:
I think i've bricked my phone because it's stuck on lg sign....smart flash tools does not find nothing on communication setup and i don't know what to do. Please help me!
Sorry for my bad english
Click to expand...
Click to collapse
How long did you wait? 1 minute or 10? Initial boot can take a bit.
Look at the threads:
http://forum.xda-developers.com/showthread.php?t=1111771
http://forum.xda-developers.com/showthread.php?t=1487105
There are some tutorials on un-bricking and fixing stuck installs.
SOLVED
I managed to flash ics stock again with smart flash tool Bricking the phone was my fault,I know
where I did wrong,but I came in this situation because after i've flashed izs occured an error over and over again: lg.setupwizard.apk stopped unnexpectedly.
Any ideas?
JoKeR[RO-VL] said:
I managed to flash ics stock again with smart flash tool Bricking the phone was my fault,I know
where I did wrong,but I came in this situation because after i've flashed izs occured an error over and over again: lg.setupwizard.apk stopped unnexpectedly.
Any ideas?
Click to expand...
Click to collapse
I've had glitches on occasion during install, but was always able to get back to recovery and re-install. Re-wiping is VERY important.
I think the important thing is that you were following a procedure, and because of that, you were able to identify where your error was and recover from it.
Welcome to the world of hacking!
Related
when i use both LG updating tools in recovery mode and KDZ Updater to return back to Froyo v10B hong kong, both of them can flash until 100%. however, when the phone start, it have bootloop and i think it is brick.
does anyone have solutions for it?
I need help,thanks
sonicpeter said:
when i use both LG updating tools in recovery mode and KDZ Updater to return back to Froyo v10B hong kong, both of them can flash until 100%. however, when the phone start, it have bootloop and i think it is brick.
does anyone have solutions for it?
I need help,thanks
Click to expand...
Click to collapse
You have to factory reset it, use R&D Test tool. And please, anyone having issues regarding anything, CM7, V20a, flashing, etc. post on dedicated threads instead making one. 'Cause this was solved earlier on those threads. Unless a new issue arises...
This Tutorial: how to unbrick your phone doesn't work?
-CMIIW-
gabwerkz said:
You have to factory reset it, use R&D Test tool. And please, anyone having issues regarding anything, CM7, V20a, flashing, etc. post on dedicated threads instead making one. 'Cause this was solved earlier on those threads. Unless a new issue arises...
Click to expand...
Click to collapse
I am sorry that i dont know what R&D test tool is. I saw that the related thread have very few response that seems to have no help on that.
Moreover, I need to recover my phone ASAP since I just have this phone for my daily work.
Thanks
redy2006 said:
This Tutorial: how to unbrick your phone doesn't work?
-CMIIW-
Click to expand...
Click to collapse
Yes, I did try this method but doesnt help at all.
after 100%, it has a reboot, showing LG logo; then reboot, showing LG logo once again.
then, since the third reboot, however, it turns to a black screen and flashing light of the 4 buttons; and have this loop forever and no LG logo again.
sorry for my poor english.
thanks
sonicpeter said:
Yes, I did try this method but doesnt help at all.
after 100%, it has a reboot, showing LG logo; then reboot, showing LG logo once again.
then, since the third reboot, however, it turns to a black screen and flashing light of the 4 buttons; and have this loop forever and no LG logo again.
sorry for my poor english.
thanks
Click to expand...
Click to collapse
Try this one. It was also posted there. If you managed to unbrick it by his method, reflash again then with your V10b HK. Don't forget CS_EMERGENCY mode. or with CS_EMERGENCY, Try direct V10b flash. Trial and error.
http://forum.xda-developers.com/showpost.php?p=18740082&postcount=45
knzo said:
Attention: if you want to flash back a KDZ, make sure to wipe data in the recovery first.
Click to expand...
Click to collapse
That's what you should have done, I'm not sure what you should do now.
gabwerkz said:
Try this one. It was also posted there. If you managed to unbrick it by his method, reflash again then with your V10b HK. Don't forget CS_EMERGENCY mode. or with CS_EMERGENCY, Try direct V10b flash. Trial and error.
http://forum.xda-developers.com/showpost.php?p=18740082&postcount=45
Click to expand...
Click to collapse
thanks all of you, i have unbricked successfully by this method.
Nice.. Now you change your title with SOLVED.
redy2006 said:
Nice.. Now you change your title with SOLVED.
Click to expand...
Click to collapse
you have alwayz helped me. i have registered mainly because i wanted to say thanks to you
Guys the procedure is perfect just one suggestion...run windowsenabler.exe as administrator and everythng will be silky smooth just unbricked my phone
venky77 said:
you have alwayz helped me. i have registered mainly because i wanted to say thanks to you
Guys the procedure is perfect just one suggestion...run windowsenabler.exe as administrator and everythng will be silky smooth just unbricked my phone
Click to expand...
Click to collapse
Unbricking your phone - one of the best feelings one can ever experience .
In_a_state said:
Unbricking your phone - one of the best feelings one can ever experience .
Click to expand...
Click to collapse
Actually ...i love XDA tearing my phone to every single bit..learning how to edit roms and everything and testing on my own phone (coz i know how to unbrick nw ) hahahahaha...its fun...
Hi All,
Sorry if this is a duplicate but everything I have seen at least has not helped me further.
I wanted to root my phone yesterday and everything (tutorial here with o4xr) the went well till it installed busy box where the computer froze and then shut itself down and so I tried to turn restart my phone normally. Now its stuck at the bit where the LG animation is and goes no further.
Here is what I have already tried:
Rerunning the o4xr/root method again
Hard Resetting (selected and running all options available)
LG Service App (windows) -> always fails on communicating with device... works up until that and I do see the SW Ugrade splash.
My version is the EURO Open v10h or something like that.
Please help me fix... This is the first phone I havent been able to root, any suggestions?
try flashing following this tut http://forum.xda-developers.com/showthread.php?t=2069723
Thanks
laufersteppenwolf said:
try flashing following this tut http://forum.xda-developers.com/showthread.php?t=2069723
Click to expand...
Click to collapse
It worked this time. I guess I was so stressed that I accidently downloaded the wrong firmware. Thanks alot for making me try that route again plus I have a backup now should this happen again.
elbuntu 101 said:
It worked this time. I guess I was so stressed that I accidently downloaded the wrong firmware. Thanks alot for making me try that route again plus I have a backup now should this happen again.
Click to expand...
Click to collapse
Nothing like a brick to freak you out with your brand new device, luckily you got it sorted
Sent from my LG-P880 using Tapatalk 2
Not hard brick, but soft brick. There is a huge difference. Just for your info.
from where can I download .kdz file and the main site is telling
ACCESS DENIED
http://csmgdl.lgmobile.com/swdata/WDLSW/LGP880/AAREBK/V10b_00/V10B_00.kdz
is there any other links for the .KDZ file to be download from
thank you
1st ' thanx to all the dev. and people at XDA
2nd' thanks in advance for helping me with my problem, might be a little one but, just can seem to get it
Now coming to my problem - in the process of trying new roms and etc recently i successfully managed to get my optimus black to a point than it got stuck at the LG screen at boot and isnt responding. then as a NOOB to my little knowledge i have tried using smart flash which at first was successful partially means as i tried to get it in to CMW recovery it again got stuck. then i repeated the whole process but this time my phone is not booting meaning its stuck on LG screen again
and up on searching in XDA for results guess another person had the same problem but, to my .. it was not solved so people pls save my phone if can and thx
Ok try this
meenank said:
1st ' thanx to all the dev. and people at XDA
2nd' thanks in advance for helping me with my problem, might be a little one but, just can seem to get it
Now coming to my problem - in the process of trying new roms and etc recently i successfully managed to get my optimus black to a point than it got stuck at the LG screen at boot and isnt responding. then as a NOOB to my little knowledge i have tried using smart flash which at first was successful partially means as i tried to get it in to CMW recovery it again got stuck. then i repeated the whole process but this time my phone is not booting meaning its stuck on LG screen again
and up on searching in XDA for results guess another person had the same problem but, to my .. it was not solved so people pls save my phone if can and thx
Click to expand...
Click to collapse
Flash the GB .kdz not the ics with the flash tool
this will help
my phone froze a month ago like this and i got it working
and dont try cwm in ICS
ICS on OB is total BULL****
so i hope it works cheer!!
Try this link : http://forum.xda-developers.com/showthread.php?t=2144577
hi all, first of all sorry for my bad english.
On my 4X i have damaged the recovery and now i can't do no one operation to make reborn my phone. Someone can help me?
i have tried to flash the KDZ firmware, but without results.
thanks all.
Vittorio28 said:
i have tried to flash the KDZ firmware, but without results.
Click to expand...
Click to collapse
No results? Why? If you follow the instruktions it should work. Make sure you don't use Win8/8.1/10. Use Win7 or XP instead so you won't have trouble with drivers.
Then, just follow the Tutorial: http://forum.xda-developers.com/showthread.php?t=2069723
If it did't work, give us a clue why!
Hello everyone! I have the lg l90 d405n and I've done everything right to put TWPR(root, unlock bootloader etc.). When i tried to reboot into recovery mode with flashify my phone turned black and i couldn't open the phone. My pc detects QHSUB_BULK and i understand that something bad happened. I went to repair it and they changed the motherboad of the phone. The think is that i don't understand why this think happens after done everything detailed and right and i really want to flash the cm13 into my phone. Now my warranty is void and i don't want to destroy my phone again. Can everybody have an answer on this. Thanks by the way!
LoXaR2 said:
Hello everyone! I have the lg l90 d405n and I've done everything right to put TWPR(root, unlock bootloader etc.). When i tried to reboot into recovery mode with flashify my phone turned black and i couldn't open the phone. My pc detects QHSUB_BULK and i understand that something bad happened. I went to repair it and they changed the motherboad of the phone. The think is that i don't understand why this think happens after done everything detailed and right and i really want to flash the cm13 into my phone. Now my warranty is void and i don't want to destroy my phone again. Can everybody have an answer on this. Thanks by the way!
Click to expand...
Click to collapse
Flashify gives you 2 choices to flash. 1 is recovery other is aboot i think.. U cant choose that wrong or phone bricks.. If they changed the motherboard check if your phone is still a d405n as some PPL got the wrong motherboard..
Warimation said:
Flashify gives you 2 choices to flash. 1 is recovery other is aboot i think.. U cant choose that wrong or phone bricks.. If they changed the motherboard check if your phone is still a d405n as some PPL got the wrong motherboard..
Click to expand...
Click to collapse
Thanks for the answer! It's still a d405n. I done that 2 times. The first one the phone got bricked and I by myself unbricked it but the second one hard bricked my phone and the motherboard had to be changed. I do every single thing right and I look again and again If I have a mistake to correct it. I don't understand where I am wrong. Or maybe that portion cant flash the recovery?
LoXaR2 said:
Thanks for the answer! It's still a d405n. I done that 2 times. The first one the phone got bricked and I by myself unbricked it but the second one hard bricked my phone and the motherboard had to be changed. I do every single thing right and I look again and again If I have a mistake to correct it. I don't understand where I am wrong. Or maybe that portion cant flash the recovery?
Click to expand...
Click to collapse
I cant help you more as im no developer.. I own a d405n too and I followed this tutorial and it worked fine.. I was On kit-kat but i dont think that have anything to do with your problem..
Forum.xda-developers.com/lg-l90/general/guide-unlock-bootloader-flash-custom-t2839690
Warimation said:
I cant help you more as im no developer.. I own a d405n too and I followed this tutorial and it worked fine.. I was On kit-kat but i dont think that have anything to do with your problem..
Forum.xda-developers.com/lg-l90/general/guide-unlock-bootloader-flash-custom-t2839690
Click to expand...
Click to collapse
I've done it twice with lollipop but i don't think that lollipop is the problem too! Maybe something has my phone and won't let me flash the recovery. Thank you by the way for answering!
Warimation said:
I cant help you more as im no developer.. I own a d405n too and I followed this tutorial and it worked fine.. I was On kit-kat but i dont think that have anything to do with your problem..
Forum.xda-developers.com/lg-l90/general/guide-unlock-bootloader-flash-custom-t2839690
Click to expand...
Click to collapse
By the way, I've done it with that guide you mentioned. To the attached files it says for my phone to download d405n_v10b_about.bin. It's for the version v10b and my phone was v20c. Maybe it's my software's problem?
LoXaR2 said:
By the way, I've done it with that guide you mentioned. To the attached files it says for my phone to download d405n_v10b_about.bin. It's for the version v10b and my phone was v20c. Maybe it's my software's problem?
Click to expand...
Click to collapse
thats why I said I was on kitkat..
nevertheless if you wanna try get to stock kitkat and work from there, at your own responsability, use this tutorial, it worked for me several times:
http://forum.xda-developers.com/lg-l90/general/guide-flash-stock-kdz-offline-lg-l90-t2803479
this for rooting:
http://forum.xda-developers.com/lg-l90/development/tool-dp-tools-manage-lg-device-t3084987
Warimation said:
thats why I said I was on kitkat..
nevertheless if you wanna try get to stock kitkat and work from there, at your own responsability, use this tutorial, it worked for me several times:
http://forum.xda-developers.com/lg-l90/general/guide-flash-stock-kdz-offline-lg-l90-t2803479
this for rooting:
http://forum.xda-developers.com/lg-l90/development/tool-dp-tools-manage-lg-device-t3084987
Click to expand...
Click to collapse
Ok I'll try this and see what happens(always at my own responsibility). Thanks for your help !!