Database Develop

CyanogenMod 10.1 Experimental Builds [p1c cdma]

Q&A isn't the ideal place, but I'm not yet able to post in the dev forum, so...
I've been using the cm10.1 experimental build (p1c) posted by cdesai for the last week or so.
It's very smooth but about once a day the Sleep of Death (I think) strikes.
It never happens when I'm using the tab. A full reset brings it back, but if I don't catch it quickly it will very rapidly drain my battery and turn the tab into a small space heater. Aggravating.
Anyone else have the issue? Any ideas?
Sent from my SCH-I800 using Tapatalk 2

set your brightness to 20% and always turn-off wifi when its not in use ....its works for me....played my tab for 30 minutes and my tablet consumed only 15% of the battery
SORRY FOR MY BAD ENGLISH
*i also turn off mobile data......when i dont need to use the internet....

frrambo said:
Q&A isn't the ideal place, but I'm not yet able to post in the dev forum, so...
I've been using the cm10.1 experimental build (p1c) posted by cdesai for the last week or so.
It's very smooth but about once a day the Sleep of Death (I think) strikes.
It never happens when I'm using the tab. A full reset brings it back, but if I don't catch it quickly it will very rapidly drain my battery and turn the tab into a small space heater. Aggravating.
Anyone else have the issue? Any ideas?
Sent from my SCH-I800 using Tapatalk 2
Click to expand...
Click to collapse
Yeah. SOD probably happens randomly as for me.
Try alroger latest build. running it as my daily driver. no SOD and FC happens in a day.

imadork said:
Yeah. SOD probably happens randomly as for me.
Try alroger latest build. running it as my daily driver. no SOD and FC happens in a day.
Click to expand...
Click to collapse
Thanks, I'll give it a shot.

imadork said:
Yeah. SOD probably happens randomly as for me.
Try alroger latest build. running it as my daily driver. no SOD and FC happens in a day.
Click to expand...
Click to collapse
I always get encryption failed when installing alroger builds - I guess you are not running CDMA (p1c) ?
If you are using a p1c then you are lucky to have alroger working.
cdesai builds work great on p1c but usb tether doesn't seem to work on any CM10.x build yet which is annoying

Re: CyanogenMod 10.1 Experimental Builds
Yup.
I tried alroger's p1c and had the encryption problem. Back to cdesai's build for now.
Sent from my SCH-I800 using Tapatalk 2

frrambo said:
Yup.
I tried alroger's p1c and had the encryption problem. Back to cdesai's build for now.
Click to expand...
Click to collapse
Yeah alroger's newest builds are broken on p1c but if you go back to his first p1c release it actually works okay http://goo.gl/QBsmn
Actually I came back to the tab tonight and it was constantly rebooting in a loop so I may go back to cdesai too.
The one I am really waiting for is AOKP 4.2.2 for p1c, apparently his build machine is broken but hopefully he will post it soon.
But I cannot do usb tether or otg in any 4.1.x or 4.2.x build yet which is frustrating.
CM9.1 is very stable but missing all the 10.1 niceties.
You should put "p1c cmda" in the thread title here so we can have a 10.1 "club" for p1c folks.

I am running alrogers latest builds without any problem on my p1. Fast reliable and without any problems

I noticed fewer problems of unattended sleep or reboot after I flushed Dalvik and partition caches.
But the device still drains battery faster than the lastest CM10 nightlies (screenshots included) did, mostly because of the radio (30% - veille GSM) and while inactive (21% - tablette inactive).
Do you experience the same? Do you know where it could come from? (since I'm not able to post to dev section yet, too).

Re: CyanogenMod 10.1 Experimental Builds
If you have unknown baseband also, then the cause has been widely known. Broken modem.
Download JPZ modem zip from the development forum, unzip it and paste modem.bin to /radio to replace the one there.
Sent from my GT-I9300 using xda app-developers app

alroger's newest build from 20130328 now has working usb tether and works on my cdma (p1c)
but it's missing an adb toggle, cannot find it for the life of me
aha! found it - in CM10 you have to go to settings -> about tabet -> build number -> tap 7 times (to enable dev mode)

So several days after reflashing cdesai's experimental build I'm happy to report only one SoD compared to one or two previously.
With a bootlooping recovery, I used Heimdall to re-stock (mostly, I used a CWM kernal). I then reflashed with the same proceedure as before, wiping cache/dalvic, flashed gapps and I'm good to go.
Aside from the USB tether and BT issues (maybe someday...), my only problem now is that the screen orientation is sometimes unresponsive. Even the battery life is good, better than I had on CM 9.
I've not had any radio problems, at least none that Better Battery Stats could show me. The modem is the likely culprit.
Good suggestion on the title change p1c needs more love! :highfive:

Of course now with _ck_'s news that alroger has USB tether working, I'm tempted to try it again. Just can't leave well enough alone.

Just came back to my tablet to wake it up and the screen shows "encryption unsuccessful" wtf
Maybe alrodger build is not quite ready.
Spent an hour getting everything right again but not messing around this time, did both Titanium backup and clockwork backup.

Not able to connect to secured wifi networks on CyanogenMod 10.1 official nightlies

I have some wifi issues on CM10.1. I cant seem to connect to my home network. When i type in the WPA key and press connect the network only gets saved and that's it. Connecting to an unsecured network works fine though. I tried connecting to a friends router but still the same problem.
This doesn't happen on sense based roms.
Any more users experiencing this ? Suggestions are welcome.
Thanks.

Nobody ?

zat0x said:
Nobody ?
Click to expand...
Click to collapse
EDIT: Nevermind, I see when you originally posted. Sorry for jumping the gun.
To your question though, have you tried with a different AOSP-based kernel? Also a nightly is an experimental build therefore it stands to reason that they might have broken WiFi in the nightly you're using and it'll be fixed in the next round. This is a risk you run with nightly builds.

unremarked said:
EDIT: Nevermind, I see when you originally posted. Sorry for jumping the gun.
To your question though, have you tried with a different AOSP-based kernel? Also a nightly is an experimental build therefore it stands to reason that they might have broken WiFi in the nightly you're using and it'll be fixed in the next round. This is a risk you run with nightly builds.
Click to expand...
Click to collapse
I tried different nightly's. All the same problems with wifi. But it seems im the only one. I also tried P.A.C. rom, AOKP 4.2.2 and Liquid-JB . Still the same issue.
On your suggestion i tried a different kernels.Thoravukk][AOSP][1-JUNE and teaMsevenAOSP_v12r6|VC didnt make any difference.

I found the problem. It seems its router related. I changed the wifi channel settings from manually to automatic and the problem was solved. Very strange. ( Arcadyan VGV7519)

Random reboots into recovery

Hello xda
I know there quite a few posts out there with people detailing their phones rebooting randomly but my phone just hit a new level of weird.
My i9000 reboots randomly into cwm recovery menu for no good reason (I know there is another thread about this but that instance is on the Nexus S and the thread has basically died). This started occurring shortly after I flashed slim ROM 4.2.2 build 5 (came from CM10.1 nightlies). Flashing the rom again and updating it to build 6 has done nothing to alleviate the issue.
I'm using the Semaphore kernel with no OC or changed settings, and having recently bought a new battery, I'm really not sure where to start looking for the problem.
If anyone can give me some tips it'd be greatly appreciate, thanks in advance.

HellDiv3r said:
Hello xda
I know there quite a few posts out there with people detailing their phones rebooting randomly but my phone just hit a new level of weird.
My i9000 reboots randomly into cwm recovery menu for no good reason (I know there is another thread about this but that instance is on the Nexus S and the thread has basically died). This started occurring shortly after I flashed slim ROM 4.2.2 build 5 (came from CM10.1 nightlies). Flashing the rom again and updating it to build 6 has done nothing to alleviate the issue.
I'm using the Semaphore kernel with no OC or changed settings, and having recently bought a new battery, I'm really not sure where to start looking for the problem.
If anyone can give me some tips it'd be greatly appreciate, thanks in advance.
Click to expand...
Click to collapse
hi
randomly i will got this problem if i m flashing backward. like from 4.2.2 - 4.2.1, or 4.1.x to 4.0.x. or repeatedly changing between kernel (i always do this to modified ROM to suits my settings n need) its probably due to changing partition in system or kernel clash (even i did all wipe) in internalsd.
Sorry to say. it will come worst sometimes if u ignore da problem or keep flashing ROM to avoid it. 'Luckily' about 2 hour ago my sgs just did. Constantly booting to recovery n its juz bootloop between kernel splashscreen n sgs white splashscreen after it.3 combo button will not working for recovery n only download mode accessible.
no more method for me . Juz flashing back to stock firmware JVU +CF-ROOT with odin was da answers
but if u dont familiar with odin.seek guide here
http://forum.xda-developers.com/showthread.php?t=2149455
but use it as ur last method!
clashing between titan.....no! kernel maybe da reason.do some wiping before changing kernel or ROM. n format system if necessary before flashing!
Sent from my GT-I9000 using xda app-developers app
---------- Post added at 04:45 AM ---------- Previous post was at 04:37 AM ----------
Now i m stick with GB Saurom for a while. really tired unbricking my fone as after my sgs softbrick,my pc went crazy :what: n i m stuck with repairing my pc first. then flash my ol lil i9000
Sent from my GT-I9000 using xda app-developers app

Reboots into CMW with Slim Bean 4.3 and Semaphore
Hi guys, any news on the subject? Exactly the same thing happening to me. I did a clean installation of Slim 4.3, after using CM10 and everything seems to be working perfectly except it reboots into CWM every 1-2h!!! I haven't changed any configuration and didn't mess with the kernel that came with the ROM, which is Semaphore... Is it a kernel issue? Should I try to flash the latest version?
HellDiv3r said:
Hello xda
I know there quite a few posts out there with people detailing their phones rebooting randomly but my phone just hit a new level of weird.
My i9000 reboots randomly into cwm recovery menu for no good reason (I know there is another thread about this but that instance is on the Nexus S and the thread has basically died). This started occurring shortly after I flashed slim ROM 4.2.2 build 5 (came from CM10.1 nightlies). Flashing the rom again and updating it to build 6 has done nothing to alleviate the issue.
I'm using the Semaphore kernel with no OC or changed settings, and having recently bought a new battery, I'm really not sure where to start looking for the problem.
If anyone can give me some tips it'd be greatly appreciate, thanks in advance.
Click to expand...
Click to collapse

I run into the same problem with my current update of my I9000 to CM 10.2.1 and the Semaphore Kernel 3.3.0 (JB).
Any ideas on this issue from the pros?

I realized that it was happening to me only when I was loosing the network coverage, like being in the underground or roaming or things like that... I don't know if it happens to everyone but in my case it's definitely this. If there is no network available my phone will boot into recovery after a while. If the signal is OK, it doesn't happen. Maybe it has something to do with the modem?!
mar0ni said:
I run into the same problem with my current update of my I9000 to CM 10.2.1 and the Semaphore Kernel 3.3.0 (JB).
Any ideas on this issue from the pros?
Click to expand...
Click to collapse

mlw_es said:
Hi guys, any news on the subject? Exactly the same thing happening to me. I did a clean installation of Slim 4.3, after using CM10 and everything seems to be working perfectly except it reboots into CWM every 1-2h!!! I haven't changed any configuration and didn't mess with the kernel that came with the ROM, which is Semaphore... Is it a kernel issue? Should I try to flash the latest version?
Click to expand...
Click to collapse
mar0ni said:
I run into the same problem with my current update of my I9000 to CM 10.2.1 and the Semaphore Kernel 3.3.0 (JB).
Any ideas on this issue from the pros?
Click to expand...
Click to collapse
mlw_es said:
I realized that it was happening to me only when I was loosing the network coverage, like being in the underground or roaming or things like that... I don't know if it happens to everyone but in my case it's definitely this. If there is no network available my phone will boot into recovery after a while. If the signal is OK, it doesn't happen. Maybe it has something to do with the modem?!
Click to expand...
Click to collapse
Deactivate Deepidle in Semaphore manager app and these reboots should be gone.
Did the trick for me.

hertzschi said:
Deactivate Deepidle in Semaphore manager app and these reboots should be gone.
Did the trick for me.
Click to expand...
Click to collapse
Yes, I did this and so far no reboots anymore.

[Kernel] 4.2.2 ION/PMEM

This is taken from cars1198 cm10.1 rom. ALL CREDITS TO HIM all i did was extract it out for others to use on other 4.2.2 based roms.
CLARIFICATION UPDATE:
PMEM BASED ROMS wifi and camcoder breaks. Everything else should work including newer maps and better 3d performance.
ONLY ROMS THAT ARE ION BASED ARE IN MASS CM BY CARS1198
AND JFBS CM11
http://d-h.st/AtF

TripFX said:
This is taken from cars1198 cm10.1 rom. ALL CREDITS TO HIM all i did was extract it out for others to use on other 4.2.2 based roms. I have tested it on AOIP 1.5 and it works fine aside from camcorder. Thanks cars1198
http://d-h.st/AtF
Click to expand...
Click to collapse
Very nice! I'm not sure what I did, but the camcorder apparently now works on my CM 10.1 install. The first recording played back garbled, but now it records perfectly. Maps should now work great on 4.2 roms.

Jorge_007 said:
Very nice! I'm not sure what I did, but the camcorder apparently now works on my CM 10.1 install. The first recording played back garbled, but now it records perfectly. Maps should now work great on 4.2 roms.
Click to expand...
Click to collapse
it does i just test it. ill see if camcorder works in aoip. did noticed that wifi is broke in aoip but i dirty flashed. will test clean install later tonite. working on cm11 fix now.

TripFX said:
it does i just test it. ill see if camcorder works in aoip. did noticed that wifi is broke in aoip but i dirty flashed. will test clean install later tonite. working on cm11 fix now.
Click to expand...
Click to collapse
Wifi worked on CM 10.1, so a clean flash may solve your problem. Good luck on the fix
---
I tested a clean install of AOIP and Wi-Fi is broken. For those of you who want to try CM 10.1 with ION/PMEM here is the link to the download. "http://d-h.st/8QA"

Jorge_007 said:
Wifi worked on CM 10.1, so a clean flash may solve your problem. Good luck on the fix
---
I tested a clean install of AOIP and Wi-Fi is broken. For those of you who want to try CM 10.1 with ION/PMEM here is the link to the download. "http://d-h.st/8QA"
Click to expand...
Click to collapse
thanks for the test. wondering about aokp if wifi will break or not.

TripFX said:
This is taken from cars1198 cm10.1 rom. ALL CREDITS TO HIM all i did was extract it out for others to use on other 4.2.2 based roms. I have tested it on AOIP 1.5 and it works fine aside from camcorder. Thanks cars1198
http://d-h.st/AtF
Click to expand...
Click to collapse
I am psyched to try it with Slimbean. To flash a new kernel, do I need to wipe anything first, or is a dirty flash sufficient? I will make a nandroid first, just to make sure everything is copacetic. Exactly what does ION/PMEM give us that we did not have? Besides finally being able to upgrade to the latest build of Maps?

Proud2banoob said:
I am psyched to try it with Slimbean. To flash a new kernel, do I need to wipe anything first, or is a dirty flash sufficient? I will make a nandroid first, just to make sure everything is copacetic. Exactly what does ION/PMEM give us that we did not have? Besides finally being able to upgrade to the latest build of Maps?
Click to expand...
Click to collapse
some 3d games i got to try work better. dirty flash should be fine. report any errors you find with slimbeam so i can add it to notes

TripFX said:
some 3d games i got to try work better. dirty flash should be fine. report any errors you find with slimbeam so i can add it to notes
Click to expand...
Click to collapse
Well, I just installed it and it seems fine. The phone is definitely faster. I will try to upgrade maps. Skype I'm leaving with the old version for other reasons.
It's like a new phone.... So smooth and fast. Wow! Still restarts if I try to start USB download mode, but I suspect I would have to reload the rom to fix that and it's not a big enough problem. It's too bad I lost my little startup screen android, but such is life.
Oops. Wi-Fi is no good. I will see if I hit the 4g ceiling. I suspect I will. Last time I went without Wi-Fi I hit the ceiling in a week. I don't want to wipe anything before I install, as this is my work phone.
Camera works but camcorder does not. So, seemingly the same problems others have had. I honestly did not try the camcorder with the old kernel, though.
Sent from my SGH-T679 using xda app-developers app

Proud2banoob said:
Well, I just installed it and it seems fine. The phone is definitely faster. I will try to upgrade maps. Skype I'm leaving with the old version for other reasons.
It's like a new phone.... So smooth and fast. Wow! Still restarts if I try to start USB download mode, but I suspect I would have to reload the rom to fix that and it's not a big enough problem. It's too bad I lost my little startup screen android, but such is life.
Oops. Wi-Fi is no good. I will see if I hit the 4g ceiling. I suspect I will. Last time I went without Wi-Fi I hit the ceiling in a week. I don't want to wipe anything before I install, as this is my work phone.
Camera works but camcorder does not. So, seemingly the same problems others have had. I honestly did not try the camcorder with the old kernel, though.
Sent from my SGH-T679 using xda app-developers app
Click to expand...
Click to collapse
using 10.1cm cars1198 cm mass op works perfectly camcorder, wifi, and all which is where i took this kernel from.

TripFX said:
using 10.1cm cars1198 cm mass op works perfectly camcorder, wifi, and all which is where i took this kernel from.
Click to expand...
Click to collapse
Annoying I can't get wifi to work. I guess Slimroms took out a key component when they made the rom "slimmer."

Proud2banoob said:
Annoying I can't get wifi to work. I guess Slimroms took out a key component when they made the rom "slimmer."
Click to expand...
Click to collapse
no its the same with aoip and aokp and im sure others as cars mentioned it was for ion based roms.

Proud2banoob said:
Annoying I can't get wifi to work. I guess Slimroms took out a key component when they made the rom "slimmer."
Click to expand...
Click to collapse
Most definitely not that is ur dev n kernels problem
HERCULES S²

Maybe slims kernel has issues or maybe a bad flash. Try reflashing or another gapps. People are having problems with kernels/gapps on the jfbs rom.

helppppp
the kernel filee is missing im on a cm 10.1 and i want a good kernel so i can optimize my phone ..... please help

Andresakapaco04 said:
the kernel filee is missing im on a cm 10.1 and i want a good kernel so i can optimize my phone ..... please help
Click to expand...
Click to collapse
its old you are much better off getting the cm10.1 rom from cars1198 cm mass op. all 3 versions are on there 10.1, 10.2 and 11

Pac-Rom Kitkat for i9300(12-Oct-16)

This is a compile done for a friend, as he found lp/mm roms to be unbearably laggy,especially when using social media/chatting apps. Just thought it could help some folks hoping to run an updated kitkat in their old(but great) galaxy s3. After some usage, his words were: this phone is part of my hand again .
This is a straight compile from cm11 sources for i9300, with the pac-rom source code(the best kitkat custom rom imo). Battery life, performance and stability are truly superb. Sources merged on 12-Oct-16, therefore having the latest stagefright and other security patches built-in. Wifi-fix for i9300 is also integrated. The rom is working fine with the latest boeffla-kernel(2.14) released for cm11, and thats the tested and recommended configuration. Some useless apps removed(like voicedialer, whisperpush,moviestudio,pacconsole and some more i can not remember) and i also removed pac console from the rom configuration settings framework as well. Have fun using it.
Link: https://mega.nz/#!Vl4nnYrK!N1PYfctzAnkOVDucMVsSCT5nnxUqY_oAZe2tsGDXkAo
All credits go to cyanogenmod and pac-rom team for both their amazing roms and sources for i9300 and many other phones we use and love!

Thanks you,!!
Screenshots?
Enviado desde mi SM-G935F mediante Tapatalk

Not having the phone means no screeshots . You can try it and put some up for everyone to see. You wont be disappointed.

What about gapps?? We have to dwnload it?

This is a clean rom, no gapps,xposed, or other mods included. use opengapps.

Really appreciate your efforts here... Great work on this rom... everything working fine... If possible can you put some time looking into Archidroid 4.4.4... IMO it was the best rom our s3 could ever have.... It has some wakeblock issues that might get resolved if we update the sources. Again thanks for your effort. S3 community owes you!

Hi uninstall theme auto reboot! Please to fix

sak0071 said:
Hi uninstall theme auto reboot! Please to fix
Click to expand...
Click to collapse
This problem persist with the latest snapshot of cm 11 also... nly install themes that you like... doesnt affect the functionality of the rom having themes installed.

Thanks for this great ROM. The only issue I have is I cant get 3G to work. Any suggestions? Would be much appreciated...

Its probably an APN problem, try inputting your carrier settings manually. 3g works fine on my friends' phone.

The rom is incredible but I need to restart my system with Wifi turned on so it can connect. If it disconnects (for any reason, disabling wifi, getting out of range etc), it only flashes "Connecting..." when connecting to the router again, but it doesn't connect

Try the fix in this thread: http://forum.xda-developers.com/galaxy-s3/help/wifi-fix-cm11-i9300-t2910872 . I already included the needed file in the rom, and it works fine here, but it couldnt hurt to try. Could it also be your router causing this?

pchatzop said:
Try the fix in this thread: http://forum.xda-developers.com/galaxy-s3/help/wifi-fix-cm11-i9300-t2910872 . I already included the needed file in the rom, and it works fine here, but it couldnt hurt to try. Could it also be your router causing this?
Click to expand...
Click to collapse
Will try! And it isn't the router, it worked with cm12.1 (no issues whatsoever) and cm13 (the issue on cm13 was random disconnects but it was rom related too).

Hey!
Switched to this rom recently and being very impressed, it having all the features one could ever want yet stable and battery friendly. Definitely better than MM roms on S3.
However do we need an kitkat bootloader or do we even have one available? Still on the official 4.3 bootloader and just wondering if could get more stability if upgrading it to kitkat.

Kitkat bootloaders dont exist for the i9300, since it never officially got kitkat. Last semi-stock kitkat rom for the i9300 were ported roms from n7100 and the korean variant of gs3, and they did not include a bootloader, because it would hard-brick the phone. Having installed 4.3 before this was the best you could do. Having this rom installed in 2 phones(my friend's and my sister's) i definitely recommend installing boeffla's last cm11 kernel, no stability,battery, or features problems with it. Actually, apart from the rebooting on uninstalling themes bug, no other bug has been reported to me from them, no even ones in the thread.

sak0071 said:
Hi uninstall theme auto reboot! Please to fix
Click to expand...
Click to collapse
Hold power, power menu come up, hold reboot, enter safemode, uninstall theme from app menu...that should work
Sent from my GT-I9300 using XDA-Developers mobile app

Hi. This rom next update? thank

jabyftw said:
The rom is incredible but I need to restart my system with Wifi turned on so it can connect. If it disconnects (for any reason, disabling wifi, getting out of range etc), it only flashes "Connecting..." when connecting to the router again, but it doesn't connect
Click to expand...
Click to collapse
I have the same problem. Is there a solution ?

wifi doesn't work ! any solution?

medsalah said:
wifi doesn't work ! any solution?
Click to expand...
Click to collapse
https://forum.xda-developers.com/showthread.php?t=2910872
Sent from my GT-I9300 using XDA-Developers Legacy app