hello my samsung galaxy s advance (i9070) won boot after i installed this recovery tool an then i tried different firmware and kernels but its not working plz help
expansion11 said:
hello my samsung galaxy s advance (i9070) won boot after i installed this recovery tool an then i tried different firmware and kernels but its not working plz help
Click to expand...
Click to collapse
how did you flash? odin or dd method? and is phone name and logo coming?
Brainiac.shri said:
how did you flash? odin or dd method? and is phone name and logo coming?
Click to expand...
Click to collapse
im using odin and i see the logo noting more
can you enter recovery (vol up+menu+power) or download mode (vol down+menu+power)?
if you can get into recovery, do wipe dalvik->reboot and tell us what happens
if download - flash your country's whole rom with odin and start again
adamuadamu said:
can you enter recovery (vol up+menu+power) or download mode (vol down+menu+power)?
if you can get into recovery, do wipe dalvik->reboot and tell us what happens
if download - flash your country's whole rom with odin and start again
Click to expand...
Click to collapse
i can go in download mode and i did try stock roms and kernels bit it wont work and cant access the recovery tool
expansion11 said:
i can go in download mode and i did try stock roms and kernels bit it wont work and cant access the recovery tool
Click to expand...
Click to collapse
were you using JB or GB, accordingly flash the samsung stock ROM and after "PASS" in ODIN remove battery and factoy reset,it should work.
Brainiac.shri said:
were you using JB or GB, accordingly flash the samsung stock ROM and after "PASS" in ODIN remove battery and factoy reset,it should work.
Click to expand...
Click to collapse
i think i was using GB, and i flashed the stock rom and i how do i factory reset it when i can't get in the recovery mode?
Одг: [Q] phone won't boot
expansion11 said:
i think i was using GB, and i flashed the stock rom and i how do i factory reset it when i can't get in the recovery mode?
Click to expand...
Click to collapse
That sounds like you had jb, that happend to me when I flashed GB over JB.
Sent from Galaxy S Advance
shut_down said:
That sounds like you had jb, that happend to me when I flashed GB over JB.
Sent from Galaxy S Advance
Click to expand...
Click to collapse
yes i had JB but that ron was not for my country so i could not connect to the mobile network so i wanted to get the right version but the download was slow so i wanted to get a diffrent kernal but then it went wrong
Одг: [Q] phone won't boot
expansion11 said:
yes i had JB but that ron was not for my country so i could not connect to the mobile network so i wanted to get the right version but the download was slow so i wanted to get a diffrent kernal but then it went wrong
Click to expand...
Click to collapse
Flash JB again. Then folow turorial how to get GB back. You have that on General I think, or on Developer part of forum. Look.
Its not gonna work if you just flashed GB, I know from my expirience.
Sent from Galaxy S Advance
shut_down said:
Flash JB again. Then folow turorial how to get GB back. You have that on General I think, or on Developer part of forum. Look.
Its not gonna work if you just flashed GB, I know from my expirience.
Sent from Galaxy S Advance
Click to expand...
Click to collapse
Thanks that worked!
Одг: [Q] phone won't boot
expansion11 said:
Thanks that worked!
Click to expand...
Click to collapse
Sent from Galaxy S Advance
so what are you using now? GB or JB? i had that problem too...it booted well jbean and im stuck at seup wizard error pop out... i cant acceess also recovery mode but download mode is ok... im now back at Gbread but i still wanted my cp to be on JBean is there a force mothod? to pass error "unfortunately, samsung setup wizard has stoped?" i had this problem same exact one...
Still problem with booting
I have tried to flash many different firmwares. ODIN says green but the phone does not boot. Just the first logo or Samsung with some animation.. than it gets stuck there. ADB does not work then either.
I have tried to root and wipe data with different ODIN, but nothing helped. TWRP is not present on "download mode" either..
On ODIN3 v3.07 I see there there is a tickbox for "NAND ERASE ALL" but when I have it checked it fails or hands on erase state.
Could you please help me what I can do next?
I would like to have complete firmware and root and install TWRP etc. but I need to get booting up ok. I have already 15 on "custome binory download"
x-samsung said:
I have tried to flash many different firmwares. ODIN says green but the phone does not boot. Just the first logo or Samsung with some animation.. than it gets stuck there. ADB does not work then either.
I have tried to root and wipe data with different ODIN, but nothing helped. TWRP is not present on "download mode" either..
On ODIN3 v3.07 I see there there is a tickbox for "NAND ERASE ALL" but when I have it checked it fails or hands on erase state.
Could you please help me what I can do next?
I would like to have complete firmware and root and install TWRP etc. but I need to get booting up ok. I have already 15 on "custome binory download"
Click to expand...
Click to collapse
after flashing.. remove / replace your battery..
try booting in recovery by pressing vol up+home+power at the same time..
then scroll down to factory reset via vol keys..
wipe and restore factory settings..
Hello guys & girls
I just sold my Galaxy Note, and since it was rooted (Alliance Rom - JB), I had to reflash stock Rom. The newest firmware for Nordic countries is ICS 4.0.3. I flashed with Odin and every thing seemed OK except the phone is stuck at Samsung logo when it restarts. I tried flashing ICS 4.0.2 and still the same problem.
What should I do to get it to work??
Ismo29 said:
Hello guys & girls
I just sold my Galaxy Note, and since it was rooted (Alliance Rom - JB), I had to reflash stock Rom. The newest firmware for Nordic countries is ICS 4.0.3. I flashed with Odin and every thing seemed OK except the phone is stuck at Samsung logo when it restarts. I tried flashing ICS 4.0.2 and still the same problem.
What should I do to get it to work??
Click to expand...
Click to collapse
How did you flash and did you wipe your N7000 when on 4.0.4 or 4.0.3?
Ismo29 said:
Hello guys & girls
I just sold my Galaxy Note, and since it was rooted (Alliance Rom - JB), I had to reflash stock Rom. The newest firmware for Nordic countries is ICS 4.0.3. I flashed with Odin and every thing seemed OK except the phone is stuck at Samsung logo when it restarts. I tried flashing ICS 4.0.2 and still the same problem.
What should I do to get it to work??
Click to expand...
Click to collapse
I don't know which ROM you have flashed exactly, but it might have been a non-wipe one. Try to flash the Gingerbread LC1 one (which is wipe) through Odin PC. Don't wipe anything from the existing ICS recovery.
hello , i installed a custom rom on my device ( gt-n7000) and after sometime i wanted to go back to my original firmware and i installed it via odin
but now when i turn on my device it is stuck on loading screen it shows me the samsung logo . I still can go to download mode but i don't know what to do . Please help me .
ultrafan996 said:
hello , i installed a custom rom on my device ( gt-n7000) and after sometime i wanted to go back to my original firmware and i installed it via odin
but now when i turn on my device it is stuck on loading screen it shows me the samsung logo . I still can go to download mode but i don't know what to do . Please help me .
Click to expand...
Click to collapse
Go to recovery and do a factory reset and reboot. If that don't work u ve to be more specific about what custom rom u are on and what stock are u on
I can't go to recovery mod only on downloading mod N7000DDLSC_N7000ODDLSC_N7000DDLS6_HOME.tar.md5 this is the firmware i'm using via odin
and I used custom rom jellybam 8.0 .
This is the JB boot loop bug, just install the stock JB for your region and then flash the PhilZ kernel, you can find it in the original Android development forum. And after flashing the PhilZ kernel you're ready to go...hit thanks if i helped.
Varad297 said:
This is the JB boot loop bug, just install the stock JB for your region and then flash the PhilZ kernel, you can find it in the original Android development forum. And after flashing the PhilZ kernel you're ready to go...hit thanks if i helped.
Click to expand...
Click to collapse
i fixed it i only need to go to recovery mod by holdig the buttons for 20 seconds and to wipe data and that's all
thank you for your time anyway
hi guys i have somehow soft bricked my s5830 galaxy ace when i flash stock firmware using odin it flashes successfully and odin gives pass but the phone keeps on rebooting to the recovery and doest not reboot to system can someone help me please.:crying::crying:
mega_man said:
hi guys i have somehow soft bricked my s5830 galaxy ace when i flash stock firmware using odin it flashes successfully and odin gives pass but the phone keeps on rebooting to the recovery and doest not reboot to system can someone help me please.:crying::crying:
Click to expand...
Click to collapse
After using Odin try to wipe data/factory reset and cache partition via stock recovery, you can also try putting off your battery a minute and doing wipes again
After flash custom roms,my phone has been bricked. I flashed stockrom via odin but there is a special issure: my phone lost logo "Samsung SIII mini'' when starting to boot...i tried to flash other stock roms and custom roms but it still happen...pls help me :crying:
dragonzz59 said:
After flash custom roms,my phone has been bricked. I flashed stockrom via odin but there is a special issure: my phone lost logo "Samsung SIII mini'' when starting to boot...i tried to flash other stock roms and custom roms but it still happen...pls help me :crying:
Click to expand...
Click to collapse
Flash the original bootlogo, grab it here