hello , i installed a custom rom on my device ( gt-n7000) and after sometime i wanted to go back to my original firmware and i installed it via odin
but now when i turn on my device it is stuck on loading screen it shows me the samsung logo . I still can go to download mode but i don't know what to do . Please help me .
ultrafan996 said:
hello , i installed a custom rom on my device ( gt-n7000) and after sometime i wanted to go back to my original firmware and i installed it via odin
but now when i turn on my device it is stuck on loading screen it shows me the samsung logo . I still can go to download mode but i don't know what to do . Please help me .
Click to expand...
Click to collapse
Go to recovery and do a factory reset and reboot. If that don't work u ve to be more specific about what custom rom u are on and what stock are u on
I can't go to recovery mod only on downloading mod N7000DDLSC_N7000ODDLSC_N7000DDLS6_HOME.tar.md5 this is the firmware i'm using via odin
and I used custom rom jellybam 8.0 .
This is the JB boot loop bug, just install the stock JB for your region and then flash the PhilZ kernel, you can find it in the original Android development forum. And after flashing the PhilZ kernel you're ready to go...hit thanks if i helped.
Varad297 said:
This is the JB boot loop bug, just install the stock JB for your region and then flash the PhilZ kernel, you can find it in the original Android development forum. And after flashing the PhilZ kernel you're ready to go...hit thanks if i helped.
Click to expand...
Click to collapse
i fixed it i only need to go to recovery mod by holdig the buttons for 20 seconds and to wipe data and that's all
thank you for your time anyway
Related
ok So any help will be greatly appreciated.
THis is what the issue is:- I am able to access download mode and via ODIN i can patch any firmware on to my phone but after ODIN is successful the phone Start with the SAMSUNG boot loader Splash screen before the kernel loads up and stays there. it doesn't go head . hence i do not have recovery mode. i have tried patching with stock firmware with PIT 512 . This didnt make any difference. I have tried DarkyROM 10.2 Resurrection and that hasnt helped either. I cannot for the life of me get the freaking phone to start up with a boot loop . Once i have a boot loop i can move forward and patch the kernel and get recovery mode . so is there any one out there who can help me with this issue. I have a USB jtag cable so getting into DOwnload mode is not an issue even if i lose 3 button combo .But i cannot get the phone to boot up with any firmware .
thank u in advance . I have a Samsung Galaxy s I9000
Hey
You can check these threads and see if it resolves your issue
http://forum.xda-developers.com/showthread.php?p=29635435#post29635435
http://forum.xda-developers.com/showthread.php?t=1802778
tchindalia said:
Hey
You can check these threads and see if it resolves your issue
http://forum.xda-developers.com/showthread.php?p=29635435#post29635435
http://forum.xda-developers.com/showthread.php?t=1802778
Click to expand...
Click to collapse
did both didnt help . the deal is i am able to run all of this but the freaking phone after patching does not go beyond the bootloader splash screen . I would also like to mention that prior to this i was running miui 4 ICS . my phone screen cracked and hence i gave it to fix the screen . when i got it back the phone guy fix the screen and ran a default samsung gb firmware on it after this the phone does not go beyond the Samsung Splash screen after which the kernel splash screen start and u get access to recovery mode.
Did you try flashing different ROMS, kernels or custom recovery? Since you can get into Download mode you could flash custom recovery and do factory reset from there.
divibyzero said:
Did you try flashing different ROMS, kernels or custom recovery? Since you can get into Download mode you could flash custom recovery and do factory reset from there.
Click to expand...
Click to collapse
done .. didnt help the moment u run a Darky Resurrection firmware that comes with Kernel . tries running different kernels directly .. it doesn't help .. im not sure what 2 do .
petesfer said:
done .. didnt help the moment u run a Darky Resurrection firmware that comes with Kernel . tries running different kernels directly .. it doesn't help .. im not sure what 2 do .
Click to expand...
Click to collapse
well if u come from ICS ...then u need to re partition ,when going back to stock!! very important
search threads for : Going back to GB from ICS i9000, this should help u gl
The easiest thing I have always done then that happens is to flash a kernel for that version that comes alone (like semaphore kernel) with Odin/Heimdall. It will come with its own recovery, so you have a starting point
Flash stock firmware and then do a factory reset from stock recovery since odin doesnt format back to rfs for you on /cache and /data i believe. Fixed it for me.
AlwaysDroid said:
Flash stock firmware and then do a factory reset from stock recovery since odin doesnt format back to rfs for you on /cache and /data i believe. Fixed it for me.
Click to expand...
Click to collapse
link. to a stock firmware . that does this? i did try stock firmware didn't help hence asking .. yeah that could be an issue.. the data and the cache wasnt wiped.. before switching to ginger bread.. mmm....
Any solution found?
Hello! Have you been able to solve the issue with inability to get to recovery?
I have exactly the same issue with my i9000...
petesfer said:
ok So any help will be greatly appreciated.
THis is what the issue is:- I am able to access download mode and via ODIN i can patch any firmware on to my phone but after ODIN is successful the phone Start with the SAMSUNG boot loader Splash screen before the kernel loads up and stays there. it doesn't go head . hence i do not have recovery mode. i have tried patching with stock firmware with PIT 512 . This didnt make any difference. I have tried DarkyROM 10.2 Resurrection and that hasnt helped either. I cannot for the life of me get the freaking phone to start up with a boot loop . Once i have a boot loop i can move forward and patch the kernel and get recovery mode . so is there any one out there who can help me with this issue. I have a USB jtag cable so getting into DOwnload mode is not an issue even if i lose 3 button combo .But i cannot get the phone to boot up with any firmware .
thank u in advance . I have a Samsung Galaxy s I9000
Click to expand...
Click to collapse
ma-dis said:
Hello! Have you been able to solve the issue with inability to get to recovery?
I have exactly the same issue with my i9000...
Click to expand...
Click to collapse
Your problem seems to be partition related. What I do is use ODIN to flash Mily's Rom 1.2 - this one repartitions your phone (must have it checked in ODIN). Phone takes about 15 minutes to go through repartition and startup process.
After that flash any newer GB from recovery menu ...
petesfer said:
ok So any help will be greatly appreciated.
THis is what the issue is:- I am able to access download mode and via ODIN i can patch any firmware on to my phone but after ODIN is successful the phone Start with the SAMSUNG boot loader Splash screen before the kernel loads up and stays there. it doesn't go head . hence i do not have recovery mode. i have tried patching with stock firmware with PIT 512 . This didnt make any difference. I have tried DarkyROM 10.2 Resurrection and that hasnt helped either. I cannot for the life of me get the freaking phone to start up with a boot loop . Once i have a boot loop i can move forward and patch the kernel and get recovery mode . so is there any one out there who can help me with this issue. I have a USB jtag cable so getting into DOwnload mode is not an issue even if i lose 3 button combo .But i cannot get the phone to boot up with any firmware .
thank u in advance . I have a Samsung Galaxy s I9000
Click to expand...
Click to collapse
u mean flash kernel,rom etc. not patch
Hi guys
I really need you help...
I have a samsung Ace .. i had this rom: [ROM] [Stock] [Nims 11 Mem Hack / BE 1.6 Kernel] S'Perience ROM ®
with clockwork recovery and of course root
then i want to try the stock rom version 2.3.6 TPH (Portugal) .. I went to sammobile downloaded that rom and odin with ops... after all of the process the odin shows up the message "pass" with blue color but my phone was blinking.. and now it only does that, blinking.. i´m not able to enter on recovery mode or on the mobile itself... only able to get download mode..
Pleasee some help!
someone ?!
Try to install the CWM recovery for Odin: http://forum.xda-developers.com/showthread.php?t=1465599
And then a Custom ROM.
maniaczek1111 said:
Try to install the CWM recovery for Odin: http://forum.xda-developers.com/showthread.php?t=1465599
And then a Custom ROM.
Click to expand...
Click to collapse
I have already tried that without sucess .. After I install anything from odin it keeps blinking
AnonFreitas said:
I have already tried that without sucess .. After I install anything from odin it keeps blinking
Click to expand...
Click to collapse
pleaseeeee...
Reflash stock via odin. Your device mightn't boot for the first time. Then reconnect & reflash via odin right away. Your device will boot. If it doesn't, take off the battery & put it back, go to recovery mode & do a factory reset & reboot. It should work. But before doing all this, remember, close all the intervening programs like kies,etc & make sure you have the latest device drivers installed.
Sent from my GT-S5830 using xda premium
Hi,
I've just upgraded my Galaxy Note N7000 to stock JB ROM via Kies. The current version now is: N7000DDLSC. After upgrading, I wanted to move to Phil's Kernel, so I downloaded Phil's safe Kernel " DDLSC-ODD" .
However, after flashing Phil's kernel via recovery, my phone is stuck at Samsung's logo. I booted into recovery and can see touch GUI,so Phil's kernal is installed butwhen the phone is turned on it is stuck at samsung logo and I cannot proceed ahead. Once or twice the phone booted but was stuck at lock screen and then restarted again and got stuck at samsung logo again.
Can you please help me out???
did u follow the instructions ?
alvinhaw said:
did u follow the instructions ?
Click to expand...
Click to collapse
Yes, I followed the method correctly. I downloaded the official JB rom yesterday and flashed it using PC Odin. For the time being I am back on official JB ROM and kernel, but want to know if it is safe to flash Phil's kernel or any other JB Kernel ?
Try flashing it again...follow instructions step by step... You shouldn't have that issue.... If it continues you can try a factory reset from Philz recovery
Of it still happens post back here for more helo
Sent from my Samsung Galaxy SV using Tapatalk 3
cooldude200478 said:
Yes, I followed the method correctly. I downloaded the official JB rom yesterday and flashed it using PC Odin. For the time being I am back on official JB ROM and kernel, but want to know if it is safe to flash Phil's kernel or any other JB Kernel ?
Click to expand...
Click to collapse
Not every safe kernal is compatible try to flash philz kernal wif the correct one then using ur external sdcard is better n safe on a phone rather then using pc odin. after u successfully flashed the right kernal n ur phone can start up normally then u can try other kernal as well.
once u flash to a different safe kernal try to make use of the safe kernal function to reboot recovery or reboot system now n update kernal need few mins to update if still stuck on N7000 logo then just go back to recovery n flash back the working kernal.
so far i don't see flashing different kernal is smooth so no point. as philz already mention that the kernal is base on rom built.
---------- Post added at 10:48 AM ---------- Previous post was at 10:35 AM ----------
How to flash safe kernal on stock rom.
Download*xxx-signed.zip*kernel matching your ROM
Put the previously downloaded*xxx-signed.zip*file on your*external*sd card
Boot into stock recovery*(volume up+home+power)
Select*"apply update from external storage".
Now select the*xxx-signed.zip*file
You are rooted + new PhilZ-cwm6 kernel
sir i have gt-n7000
i installed many roms ok but now i am facing .
1. installing every rom stock /custom , when reboot it stuck on Samsung GT-N7000 logo .
2. I try evry philzz and cwm to data factory wipe but it is also not wiping and bootloop is still there
3. First it was showing csc code = csc but now it is showing csc code = KOR , when i enter to recovery mode.
Please suggest soluton for me, my download mode and recovery mode working .
Will appreciate your positive response.
inayat1988 said:
sir i have gt-n7000
i installed many roms ok but now i am facing .
1. Installing every rom stock /custom , when reboot it stuck on samsung gt-n7000 logo .
2. I try evry philzz and cwm to data factory wipe but it is also not wiping and bootloop is still there
3. First it was showing csc code = csc but now it is showing csc code = kor , when i enter to recovery mode.
Please suggest soluton for me, my download mode and recovery mode working .
Will appreciate your positive response.
Click to expand...
Click to collapse
try to flash stock rom with odin first.
albatron34 said:
try to flash stock rom with odin first.
Click to expand...
Click to collapse
Sir i already flashed it many times stock rom 4.0.4 with odin but still getting boot loop , instead of Samsung GT-N7000 it then stuck on next 2nd logo SAMSUNG .
When i try to wipe data i am unable to wipe it also stuck there ,
When i try to restore my backup of 4.0.4 made , it also hang on restoring data, this backup is ok and i did it many times
One more thing my binary download count = yes (12 Counts)
please hele me .
Thnx
inayat1988 said:
Sir i already flashed it many times stock rom 4.0.4 with odin but still getting boot loop , instead of Samsung GT-N7000 it then stuck on next 2nd logo SAMSUNG .
When i try to wipe data i am unable to wipe it also stuck there ,
When i try to restore my backup of 4.0.4 made , it also hang on restoring data, this backup is ok and i did it many times
One more thing my binary download count = yes (12 Counts)
please hele me .
Thnx
Click to expand...
Click to collapse
i am flashing this stock rom N7000XXLRI_N7000OXXLP8_N7000XXLRB_HOME.tar.md5
i also flashed pit file for 16GB (N7000 STOCK PIT.pit)
what i remember is i did hydracore flash and then i am facing this issue after flashing hydra core
thnx
albatron34 said:
try to flash stock rom with odin first.
Click to expand...
Click to collapse
plz reply me i realy need your help
boot loop
inayat1988 said:
i am flashing this stock rom N7000XXLRI_N7000OXXLP8_N7000XXLRB_HOME.tar.md5
i also flashed pit file for 16GB (N7000 STOCK PIT.pit)
what i remember is i did hydracore flash and then i am facing this issue after flashing hydra core
thnx
Click to expand...
Click to collapse
any update please
Hello Everyone I have GT N7000 XXLTA 4.1.2. I tried to root it using Odin flashing Philz-XXLTA-OXA.5.15.0.tar.md5. after showing pass message in odin binary changed into custom but phone not rooted. Afterwards I factory reset my phone and it is stuck at boot screen with yellow triangle. I can go in download mode.
Help me out please !! How to recover my phone ? You people are the only help !!
HELP ME OUT !!
Thank you !!
Flash original rom again via Odin and after first full boot into stock rom the root file via stock recovery.
User_99 said:
Flash original rom again via Odin and after first full boot into stock rom the root file via stock recovery.
Click to expand...
Click to collapse
Thanks for replying !!
Can I flash any stock rom available at samfirmware.com or specific one like XXLTA 4.1.2 ?
Best is a Rom for your country.