Stuck at bootscreen Please Help !! - Galaxy Note GT-N7000 Q&A, Help & Troubleshooting

Hello Everyone I have GT N7000 XXLTA 4.1.2. I tried to root it using Odin flashing Philz-XXLTA-OXA.5.15.0.tar.md5. after showing pass message in odin binary changed into custom but phone not rooted. Afterwards I factory reset my phone and it is stuck at boot screen with yellow triangle. I can go in download mode.
Help me out please !! How to recover my phone ? You people are the only help !!
HELP ME OUT !!
Thank you !!

Flash original rom again via Odin and after first full boot into stock rom the root file via stock recovery.

User_99 said:
Flash original rom again via Odin and after first full boot into stock rom the root file via stock recovery.
Click to expand...
Click to collapse
Thanks for replying !!
Can I flash any stock rom available at samfirmware.com or specific one like XXLTA 4.1.2 ?

Best is a Rom for your country.

Related

[Q] My G-note got crashed, please help me...

My G-note (N7000) got crashed, please help me…………
After flash N7000XXLS2 my G-Note not booting up anymore. It’s stuck on Samsung logo after the boot animation.
Please help me to load N7000XXLS2 or go back to ICS.
Thanks in advance.
musheercmr said:
My G-note (N7000) got crashed, please help me…………
After flash N7000XXLS2 my G-Note not booting up anymore. It’s stuck on Samsung logo after the boot animation.
Please help me to load N7000XXLS2 or go back to ICS.
Thanks in advance.
Click to expand...
Click to collapse
stuck in Samsung logo just mean you need to just fullwipe factory in CMW. but be sure you are on safe kernel such as Speedmode or Hydracore before wiping.. i dont know if xxls2 kernel is brick free or not. but stucking at samsung logo has always been solved by fullwipe factory in my case
mistajoe83 said:
stuck in Samsung logo just mean you need to just fullwipe factory in CMW. but be sure you are on safe kernel such as Speedmode or Hydracore before wiping..
Click to expand...
Click to collapse
I did full wipe but still the same .
and now how can i load safe kernel? or any other advise to fix ?
thank you.
musheercmr said:
My G-note (N7000) got crashed, please help me…………
After flash N7000XXLS2 my G-Note not booting up anymore. It’s stuck on Samsung logo after the boot animation.
Please help me to load N7000XXLS2 or go back to ICS.
Thanks in advance.
Click to expand...
Click to collapse
It takes some time to boot up after you flash a rom..just wait for few minutes and see if it boots up
And how did you flash the rom..i mean what rom,kernel and did you do the wipes
rajsekhar.300 said:
It takes some time to boot up after you flash a rom..just wait for few minutes and see if it boots up
And how did you flash the rom..i mean what rom,kernel and did you do the wipes
Click to expand...
Click to collapse
that is correct. takes times. but if you waited more than 10 minutes try flashing other rom.. safest method is pc odin.
rajsekhar.300 said:
It takes some time to boot up after you flash a rom..just wait for few minutes and see if it boots up
And how did you flash the rom..i mean what rom,kernel and did you do the wipes
Click to expand...
Click to collapse
I was waiting more than a hours and i tried to Flash ICS by odin-3, that one also failed
i was in N7000DDLR9 ROM. then i flash N7000XXLS2 by mobi-odin
musheercmr said:
I did full wipe but still the same .
and now how can i load safe kernel? or any other advise to fix ?
thank you.
Click to expand...
Click to collapse
tell us how you flash it. via PC ODIN or ClockWorkMOD.?
as for the kernel if you have Extrnal sdcard then download SpeedMod 3-15 or Hydracore kernel than put that in your external Sdcard. Open CMW than flash the kernel then go to advance>reboot recovery.. wait for recovery rebooted than you are safe to flash other rom.
---------- Post added at 07:28 AM ---------- Previous post was at 07:20 AM ----------
look here.. theres a tutorial of flashing with PC ODIN + Firmware download..
the instruction is detailed and clear.. this should help you the most.
http://forum.xda-developers.com/showthread.php?t=1424997
musheercmr said:
I was waiting more than a hours and i tried to Flash ICS by odin-3, that one also failed
i was in N7000DDLR9 ROM. then i flash N7000XXLS2 by mobi-odin
Click to expand...
Click to collapse
How could you flash xxls2(jb leak) using pc odin..you need to do it using cwm
And what kernel were u on when you flashed xxls2
rajsekhar.300 said:
How could you flash xxls2(jb leak) using pc odin..you need to do it using cwm
And what kernel were u on when you flashed xxls2
Click to expand...
Click to collapse
finally i got installed ICS 4.0.4 (N7000DDLR6) by PC-Odin. thank you guys.
So from now, can you please advise, how can i flash JB (N7000XXLS2 LEAK). @ present my phone is not rooted. and running on fully stoke ROM N7000DDLR6. advise please...
musheercmr said:
finally i got installed ICS 4.0.4 (N7000DDLR6) by PC-Odin. thank you guys.
So from now, can you please advise, how can i flash JB (N7000XXLS2 LEAK). @ present my phone is not rooted. and running on fully stoke ROM N7000DDLR6. advise please...
Click to expand...
Click to collapse
First flash a safe kernel(like philz,hydracore or speedmod) and then flash the jb rom through cwm
rajsekhar.300 said:
First flash a safe kernel(like philz,hydracore or speedmod) and then flash the jb rom through cwm
Click to expand...
Click to collapse
since you flash through PC ODIN means everything is stocked. Means the brick bug is present. you now only have samsung stock recovery and not ClockWorkMod.
if you are planning to install just Samsung Stock Rom then this step is applicable here
http://techie-buzz.com/android/samsung-galaxy-note-jelly-bean-firmware-leaks.html
or
http://din.huluselangor.net/?p=21813&replytocom=5359&wpmp_switcher=mobile
if you are planning install xxls2 custom then you must first root your phone then install CMW and Flash Desired rom with safe kernel installed
look here for tutorial
http://forum.xda-developers.com/showthread.php?t=1329360
mistajoe83 said:
since you flash through PC ODIN means everything is stocked. Means the brick bug is present. you now only have samsung stock recovery and not ClockWorkMod.
if you are planning to install just Samsung Stock Rom then this step is applicable here
http://techie-buzz.com/android/samsung-galaxy-note-jelly-bean-firmware-leaks.html
or
http://din.huluselangor.net/?p=21813&replytocom=5359&wpmp_switcher=mobile
if you are planning install xxls2 custom then you must first root your phone then install CMW and Flash Desired rom with safe kernel installed
Click to expand...
Click to collapse
i tried the same as from 1st link, flashing by PC-Odin N7000XXLS2 (LEAK). but giving me FAIL! when i click start
i am using Odin 1.87, is that make any issue ?
musheercmr said:
i tried the same as from 1st link, flashing by PC-Odin N7000XXLS2 (LEAK). but giving me FAIL! when i click start
i am using Odin 1.87, is that make any issue ?
Click to expand...
Click to collapse
From where did you download the rom..it it was downloaded from sammobile or from that hotfile link,then you should flash it through pc odin
And if its a custom rom that you downloaded from the xda,then it should be flashed through cwm
the Sam mobile and the hot link are the same. youncan flash the rom using pc odin. but before that put the philz kernel xxls2 in the external sd. so that after the flash using odin, you can boot into recovery and flash that kernel and be safe and do the wipe.
nokiamodeln91 said:
the Sam mobile and the hot link are the same..
Click to expand...
Click to collapse
Yes i know..i said that just to make it clear for the op
Gents, Can you please clarify before I am going to do below. And advise if this is the proper way.
• Flash GB (2.3.6) and wipe
• Then flash ICS (4.0.4)
• Download Notecore (or Speedmod, CF root kernel) kernel and flash by PC-Odin
• Then copy N7000XXLS2 (LEAK) to SD card.
• Boot to CWM recovery, then flash from SD, restart.
Thanks.
musheercmr said:
Gents, Can you please clarify before I am going to do below. And advise if this is the proper way.
• Flash GB (2.3.6) and wipe
• Then flash ICS (4.0.4)
• Download Notecore (or Speedmod, CF root kernel) kernel and flash by PC-Odin
• Then copy N7000XXLS2 (LEAK) to SD card.
• Boot to CWM recovery, then flash from SD, restart.
Thanks.
Click to expand...
Click to collapse
All those steps are correct if you are about to flash a leaked jb rom
If its a leaked custom jb rom,then you need to flash it through cwm
[email protected]$3K#@R said:
All those steps are correct if you are about to flash a leaked jb rom
If its a leaked custom jb rom,then you need to flash it through cwm
Click to expand...
Click to collapse
still am in stuck.
now i have N7000DDLR9 (ICS 4.0.4) without root. then i tried to flash N7000XXLS2 (LEAK) by PC-Odin, i am getting failed.
can you please explain step by step, how do from N7000DDLR9 (without root)
thanks.
musheercmr said:
still am in stuck.
now i have N7000DDLR9 (ICS 4.0.4) without root. then i tried to flash N7000XXLS2 (LEAK) by PC-Odin, i am getting failed.
can you please explain step by step, how do from N7000DDLR9 (without root)
thanks.
Click to expand...
Click to collapse
What was the error you got in the pc odin
paste the odin logs that show failed

PLEASE HELP??? my samsung i9070 stuck on samsung logo

I am newer on samsung phone,,,, i was update my phone using JB frimware
now my phone hangs on samsung logo (i cant enter recovery mode,,, but download mode still oke)
try flashing many times with other JB stock roms but problem still same
i cant enter recovery mode,,, but download mode still oke
my custom binary domwload ; yes (115 count)
how to repair my phone????
i want to flash karnel but dont know exactly step by step?
i am tryng to downgrade to GB with tutorial on this forum but always says error (unable to pit partition)
THANKS for reply n your help....
l_m_husni said:
I am newer on samsung phone,,,, i was update my phone using JB frimware
now my phone hangs on samsung logo (i cant enter recovery mode,,, but download mode still oke)
try flashing many times with other JB stock roms but problem still same
i cant enter recovery mode,,, but download mode still oke
my custom binary domwload ; yes (115 count)
how to repair my phone????
i want to flash karnel but dont know exactly step by step?
i am tryng to downgrade to GB with tutorial on this forum but always says error (unable to pit partition)
THANKS for reply n your help....
Click to expand...
Click to collapse
Maybe the downloaded file is corrupted..Try flashing another baseband FW and check it.
For flashing kernels theres a SAFE AND FREE app
http://dl.xda-developers.com/attachdl/bca6a9b5a73472139b21ff4f2d7b4722/51a03873/1/9/0/2/9/3/1/Universal_Kernel_Flash_Tool_110.apk
Install this app and open it
Select the md5 or bin files from it and flash them and restart.
There you go...its done
I dont know about downgrading to GB..never tried and not gonna try it
MY JB is awesome:highfive:
narutosri said:
Maybe the downloaded file is corrupted..Try flashing another baseband FW and check it.
For flashing kernels theres a SAFE AND FREE app
http://dl.xda-developers.com/attachdl/bca6a9b5a73472139b21ff4f2d7b4722/51a03873/1/9/0/2/9/3/1/Universal_Kernel_Flash_Tool_110.apk
Install this app and open it
Select the md5 or bin files from it and flash them and restart.
There you go...its done
I dont know about downgrading to GB..never tried and not gonna try it
MY JB is awesome:highfive:
Click to expand...
Click to collapse
thanks for reply,,,
look my binary count (115) i was flashing with many different frimware
can you guide me step by step for repairing recovery mode????
THANKS
You can't enter recovery after flashing original fw via odin? Try taking out battery, put it back in and force recovery. Press it for a long time till it enter recovery. Then factory reset. I encountered this once on galaxy ace, endless bootloop and can't enter recovery but download is okay. Then I pressed the buttton until it somehow got into recovery. I don't know if this works but you can try though.
l_m_husni said:
thanks for reply,,,
look my binary count (115) i was flashing with many different frimware
can you guide me step by step for repairing recovery mode????
THANKS
Click to expand...
Click to collapse
We do not have any JB custom kernel that is flahsable with Odin. So I suppose you flashed GB custom kernel on JB, that is your problem. Flash whole STOCK JB FW again. After that use ONLY JB kernels. CoCore 6.x for example. Only one not abandoned from updates for now.
Do this again with JB, step by step: http://forum.xda-developers.com/showthread.php?t=2086965
And kernel: http://forum.xda-developers.com/showthread.php?t=2140597
Unzip it, put it on SD card, install Frapeti's universal kernel flasher. Install some ROOT explorer, this app needs it to work. Use it to install kernel.
Study content of this thread for future use: http://forum.xda-developers.com/showthread.php?t=2094318

Gt-n7000 brick

hello , i installed a custom rom on my device ( gt-n7000) and after sometime i wanted to go back to my original firmware and i installed it via odin
but now when i turn on my device it is stuck on loading screen it shows me the samsung logo . I still can go to download mode but i don't know what to do . Please help me .
ultrafan996 said:
hello , i installed a custom rom on my device ( gt-n7000) and after sometime i wanted to go back to my original firmware and i installed it via odin
but now when i turn on my device it is stuck on loading screen it shows me the samsung logo . I still can go to download mode but i don't know what to do . Please help me .
Click to expand...
Click to collapse
Go to recovery and do a factory reset and reboot. If that don't work u ve to be more specific about what custom rom u are on and what stock are u on
I can't go to recovery mod only on downloading mod N7000DDLSC_N7000ODDLSC_N7000DDLS6_HOME.tar.md5 this is the firmware i'm using via odin
and I used custom rom jellybam 8.0 .
This is the JB boot loop bug, just install the stock JB for your region and then flash the PhilZ kernel, you can find it in the original Android development forum. And after flashing the PhilZ kernel you're ready to go...hit thanks if i helped.
Varad297 said:
This is the JB boot loop bug, just install the stock JB for your region and then flash the PhilZ kernel, you can find it in the original Android development forum. And after flashing the PhilZ kernel you're ready to go...hit thanks if i helped.
Click to expand...
Click to collapse
i fixed it i only need to go to recovery mod by holdig the buttons for 20 seconds and to wipe data and that's all
thank you for your time anyway

Someone Help Me Fix My Soft Bricked GT-N7000

Hi XDA members,
so heres the deal.
I have a GT-N7000, I got it from a friend, but it was soft bricked. with the kies emergency error.
i tried to do the emergency recovery with kies, but it said "GT-N7000 does not support initializing".
SO my next thought was Odin. ive downloaded about 3 or 4 firmware files. flashed them and i get stuck at the "SAMSUNG GALAXY NOTE GT-N7000" screen everytime.
i dont know what firmware it was on, and since it wont boot the only information i can provide is whats on the sticker under the battery.
idk if it was rooted, or on jb/ics/gb or custom rom. idk about the kernel. please someone help me fix this ill provide any information i can. :good: :highfive:
Is flash successful? Have you tried flashing Philz kernel through odin? Then try getting into recovery.
nokiamodeln91 said:
Is flash successful? Have you tried flashing Philz kernel through odin? Then try getting into recovery.
Click to expand...
Click to collapse
yeah the jellybean stock flashed successfully, the ics didnt. it failed during the FSFactory.
i think this is the emmc brick but i cant find a gingerbread rom to flash from odin
Flash Philz kernel and try to get into recovery.
nokiamodeln91 said:
Flash Philz kernel and try to get into recovery.
Click to expand...
Click to collapse
i tried philz , odin just gets stuck when trying to flash it

Root and bootloop

Help please i tried rooting my N9200 dual sim and now i'm stuck one Samsung galaxy note 5 screen. I can get into download mode but not recovery. please help just got the phone yesterday!
Also is there link to stock recovery as I've flashed twrp via odin and i can't get into recovery.
resolved:
So on Odin I unticked auto reboot and ticked Reset Time then I flashed custom recovery..
Then i flashed the latest firmware which I was on already and it worked.
Try to flash Skyhigh Kernel via Odin.
talpur1 said:
Try to flash Skyhigh Kernel via Odin.
Click to expand...
Click to collapse
will it work for N9200 ?
And i flashed twrp via odin and i can't get into recovery
thanks
talpur1 said:
Try to flash Skyhigh Kernel via Odin.
Click to expand...
Click to collapse
only boot img no tar file to flash via odin
If you cannot go into recovery then you should download and flash stock rom by Odin.
already sorted see my original post.
i already tried that first of all but unsuccessful.
Sorry Buddy My Bad.

Categories

Resources