[Q] Stuck in Boot loop & Unable to do wipe factory data - Galaxy Note GT-N7000 Q&A, Help & Troubleshooting

sir i have gt-n7000
i installed many roms ok but now i am facing .
1. installing every rom stock /custom , when reboot it stuck on Samsung GT-N7000 logo .
2. I try evry philzz and cwm to data factory wipe but it is also not wiping and bootloop is still there
3. First it was showing csc code = csc but now it is showing csc code = KOR , when i enter to recovery mode.
Please suggest soluton for me, my download mode and recovery mode working .
Will appreciate your positive response.

inayat1988 said:
sir i have gt-n7000
i installed many roms ok but now i am facing .
1. Installing every rom stock /custom , when reboot it stuck on samsung gt-n7000 logo .
2. I try evry philzz and cwm to data factory wipe but it is also not wiping and bootloop is still there
3. First it was showing csc code = csc but now it is showing csc code = kor , when i enter to recovery mode.
Please suggest soluton for me, my download mode and recovery mode working .
Will appreciate your positive response.
Click to expand...
Click to collapse
try to flash stock rom with odin first.

albatron34 said:
try to flash stock rom with odin first.
Click to expand...
Click to collapse
Sir i already flashed it many times stock rom 4.0.4 with odin but still getting boot loop , instead of Samsung GT-N7000 it then stuck on next 2nd logo SAMSUNG .
When i try to wipe data i am unable to wipe it also stuck there ,
When i try to restore my backup of 4.0.4 made , it also hang on restoring data, this backup is ok and i did it many times
One more thing my binary download count = yes (12 Counts)
please hele me .
Thnx

inayat1988 said:
Sir i already flashed it many times stock rom 4.0.4 with odin but still getting boot loop , instead of Samsung GT-N7000 it then stuck on next 2nd logo SAMSUNG .
When i try to wipe data i am unable to wipe it also stuck there ,
When i try to restore my backup of 4.0.4 made , it also hang on restoring data, this backup is ok and i did it many times
One more thing my binary download count = yes (12 Counts)
please hele me .
Thnx
Click to expand...
Click to collapse
i am flashing this stock rom N7000XXLRI_N7000OXXLP8_N7000XXLRB_HOME.tar.md5
i also flashed pit file for 16GB (N7000 STOCK PIT.pit)
what i remember is i did hydracore flash and then i am facing this issue after flashing hydra core
thnx

albatron34 said:
try to flash stock rom with odin first.
Click to expand...
Click to collapse
plz reply me i realy need your help

boot loop
inayat1988 said:
i am flashing this stock rom N7000XXLRI_N7000OXXLP8_N7000XXLRB_HOME.tar.md5
i also flashed pit file for 16GB (N7000 STOCK PIT.pit)
what i remember is i did hydracore flash and then i am facing this issue after flashing hydra core
thnx
Click to expand...
Click to collapse
any update please

Related

[Q] Galaxy Ace stuck in reboot loop

My Galaxy Ace is stuck in a reboot loop after trying to flash 2.3.6 onto it, when it had 2.3.5 on it previously.
I've used ODIN and no matter what firmware I try to flash onto it, it just goes into a reboot loop.
Any idea how to fix it?
Did you try to do a wipe?
vkanamekuran said:
Did you try to do a wipe?
Click to expand...
Click to collapse
A wipe worked! Thanks!
how to do a wipe please tell
mor1228 said:
how to do a wipe please tell
Click to expand...
Click to collapse
press down home button and then power on phone ...--> you will enter into recovery mode .
select wipe with help of volume keys and there you go out of bootloop
My Galaxy Ace is also in some sorta reboot loop.
Everything was working fine with it (phone is rooted and CWM installed) until I did a phone reset because I was giving the phone to my gf. After doing this the phone reboots, the blue samsung logo plays (without sound) and then repeats ad-infinitum. I can get into recovery mode and download mode ok and I've tried wipe and even restored a CWM backup (it says it was successful) but the phone just keeps rebooting. I can see the phone in odin but I've never tried to flash anything onto it and quite frankly I'm unsure whether it would just make things worse (if it needs to go back to Samsung for repair). Any help would be appreciated...
If you have cwm ..why dont you download some custom rom like cm7and flash it ..that would bring your phone back to life ...then you can downgrade to stock rom if you want ...and btw in cwm try cache partition , clear data /factory reset and clear dalvik cache ..see if it boots after you do this ..
Sent from my SGA rocking CM7.2 by vo-1 + all-in-one script
when i always flash by odin or by cwm i always do wipe , wipe cache and wipe dalvik, this helps me everytime
I managed to flash a firmware from samfirmware and it fixed the reboot.
Now my issue is when I connect to Kies, it says there's an updated firmware for the phone but it fails every attempt to install it. I went back to samfirmware and found this firmware: S5830ZSKPD ## but when I download and extract it there's only 1 x MD5 file and 1 x DLL file?! The other firmware had the 4 or 5 files needed to include in Odin... any ideas guys?
I think its a "one package file " ..I forgot the correct name but there is some option like that in odin ..dont worry it contains all the required files ..and if you are scared to do it then go to you tube ..there are many tutorials showing it then...
Sent from my SGA rocking CM7.2 by vo-1 + all-in-one script
rogers4759 said:
I think its a "one package file " ..I forgot the correct name but there is some option like that in odin ..dont worry it contains all the required files ..and if you are scared to do it then go to you tube ..there are many tutorials showing it then...
Click to expand...
Click to collapse
Yep, that's exactly what it was, thanks again.
Unfortunately with this firmware, Kies doesn't recognise it and provides no info.
I flashed back to the older firmware... I'll just have to keep experimenting I guess.
for flashing with odin --> http://forum.xda-developers.com/showthread.php?t=1225493
many people says, don't upgrade the firmware with KIES.
dianpadi said:
for flashing with odin --> http://forum.xda-developers.com/showthread.php?t=1225493
many people says, don't upgrade the firmware with KIES.
Click to expand...
Click to collapse
Well I could flash it with Odin if I had the firmware but I don't.
It appears it's not available on SamFirmware.com
Do you know where I can download the following firmware?
PDA:KPD / PHONE:KPD / CSC:KPC (THL)
Thanks
Lol I cant understand those firmwares ..can you tell me which version of android you want like 2.3.4/2.3.5/2.3.6 ...then ill be able to help you wanr
Sent from my SGA rocking CM7.2 by vo-1 + all-in-one script
Thanks anyway but I managed to find the firmware online and flashed it using Odin.
Now Kies says I'm using the latest which is a good start : )
Now I just need to find a way to root my SGS2 GT-I9100T
U can try a custom ROM from the Developer's forums here.
I also once stucked in the Reboot Loop..............
But then I installed a custom or if you want features from a official Rom, you can install Stock Based custom ROm from the Developer forums of Galaxy Ace. Really good Rom have been made by the developers
In the chance that someone else is looking for this latest OEM firmware update:
PDA:KPD / PHONE:KPD / CSC:KPC (THL)
It can be downloaded from: http://translate.googleusercontent....flgljh&usg=ALkJrhiMpHV83dugh4RGwhKpyjIrYIgn2Q
It is in "one part file" format and can be flashed using Odin.
whatever may be the problem ......just rem to keep a backup of ur previously used rom and just flash it with cwm...
Progress?
Sent from my GT-S5830 using xda premium
Read all the previous no way out loop boot
Hi every body
i have installed cwm, custum firmware, every thing goes ok
tryed to use simlock remover, no message, turned off the Galaxy Ace but after rebooting, a continuous loop boot, no acces to recovery, flashing on wath ever firmware version with odin success but on rebooting the loop is back, help please.
PS : while flasing with odin : "big partition size!!"

[Q] phone won't boot

hello my samsung galaxy s advance (i9070) won boot after i installed this recovery tool an then i tried different firmware and kernels but its not working plz help
expansion11 said:
hello my samsung galaxy s advance (i9070) won boot after i installed this recovery tool an then i tried different firmware and kernels but its not working plz help
Click to expand...
Click to collapse
how did you flash? odin or dd method? and is phone name and logo coming?
Brainiac.shri said:
how did you flash? odin or dd method? and is phone name and logo coming?
Click to expand...
Click to collapse
im using odin and i see the logo noting more
can you enter recovery (vol up+menu+power) or download mode (vol down+menu+power)?
if you can get into recovery, do wipe dalvik->reboot and tell us what happens
if download - flash your country's whole rom with odin and start again
adamuadamu said:
can you enter recovery (vol up+menu+power) or download mode (vol down+menu+power)?
if you can get into recovery, do wipe dalvik->reboot and tell us what happens
if download - flash your country's whole rom with odin and start again
Click to expand...
Click to collapse
i can go in download mode and i did try stock roms and kernels bit it wont work and cant access the recovery tool
expansion11 said:
i can go in download mode and i did try stock roms and kernels bit it wont work and cant access the recovery tool
Click to expand...
Click to collapse
were you using JB or GB, accordingly flash the samsung stock ROM and after "PASS" in ODIN remove battery and factoy reset,it should work.
Brainiac.shri said:
were you using JB or GB, accordingly flash the samsung stock ROM and after "PASS" in ODIN remove battery and factoy reset,it should work.
Click to expand...
Click to collapse
i think i was using GB, and i flashed the stock rom and i how do i factory reset it when i can't get in the recovery mode?
Одг: [Q] phone won't boot
expansion11 said:
i think i was using GB, and i flashed the stock rom and i how do i factory reset it when i can't get in the recovery mode?
Click to expand...
Click to collapse
That sounds like you had jb, that happend to me when I flashed GB over JB.
Sent from Galaxy S Advance
shut_down said:
That sounds like you had jb, that happend to me when I flashed GB over JB.
Sent from Galaxy S Advance
Click to expand...
Click to collapse
yes i had JB but that ron was not for my country so i could not connect to the mobile network so i wanted to get the right version but the download was slow so i wanted to get a diffrent kernal but then it went wrong
Одг: [Q] phone won't boot
expansion11 said:
yes i had JB but that ron was not for my country so i could not connect to the mobile network so i wanted to get the right version but the download was slow so i wanted to get a diffrent kernal but then it went wrong
Click to expand...
Click to collapse
Flash JB again. Then folow turorial how to get GB back. You have that on General I think, or on Developer part of forum. Look.
Its not gonna work if you just flashed GB, I know from my expirience.
Sent from Galaxy S Advance
shut_down said:
Flash JB again. Then folow turorial how to get GB back. You have that on General I think, or on Developer part of forum. Look.
Its not gonna work if you just flashed GB, I know from my expirience.
Sent from Galaxy S Advance
Click to expand...
Click to collapse
Thanks that worked!
Одг: [Q] phone won't boot
expansion11 said:
Thanks that worked!
Click to expand...
Click to collapse
Sent from Galaxy S Advance
so what are you using now? GB or JB? i had that problem too...it booted well jbean and im stuck at seup wizard error pop out... i cant acceess also recovery mode but download mode is ok... im now back at Gbread but i still wanted my cp to be on JBean is there a force mothod? to pass error "unfortunately, samsung setup wizard has stoped?" i had this problem same exact one...
Still problem with booting
I have tried to flash many different firmwares. ODIN says green but the phone does not boot. Just the first logo or Samsung with some animation.. than it gets stuck there. ADB does not work then either.
I have tried to root and wipe data with different ODIN, but nothing helped. TWRP is not present on "download mode" either..
On ODIN3 v3.07 I see there there is a tickbox for "NAND ERASE ALL" but when I have it checked it fails or hands on erase state.
Could you please help me what I can do next?
I would like to have complete firmware and root and install TWRP etc. but I need to get booting up ok. I have already 15 on "custome binory download"
x-samsung said:
I have tried to flash many different firmwares. ODIN says green but the phone does not boot. Just the first logo or Samsung with some animation.. than it gets stuck there. ADB does not work then either.
I have tried to root and wipe data with different ODIN, but nothing helped. TWRP is not present on "download mode" either..
On ODIN3 v3.07 I see there there is a tickbox for "NAND ERASE ALL" but when I have it checked it fails or hands on erase state.
Could you please help me what I can do next?
I would like to have complete firmware and root and install TWRP etc. but I need to get booting up ok. I have already 15 on "custome binory download"
Click to expand...
Click to collapse
after flashing.. remove / replace your battery..
try booting in recovery by pressing vol up+home+power at the same time..
then scroll down to factory reset via vol keys..
wipe and restore factory settings..

PLEASE HELP??? my samsung i9070 stuck on samsung logo

I am newer on samsung phone,,,, i was update my phone using JB frimware
now my phone hangs on samsung logo (i cant enter recovery mode,,, but download mode still oke)
try flashing many times with other JB stock roms but problem still same
i cant enter recovery mode,,, but download mode still oke
my custom binary domwload ; yes (115 count)
how to repair my phone????
i want to flash karnel but dont know exactly step by step?
i am tryng to downgrade to GB with tutorial on this forum but always says error (unable to pit partition)
THANKS for reply n your help....
l_m_husni said:
I am newer on samsung phone,,,, i was update my phone using JB frimware
now my phone hangs on samsung logo (i cant enter recovery mode,,, but download mode still oke)
try flashing many times with other JB stock roms but problem still same
i cant enter recovery mode,,, but download mode still oke
my custom binary domwload ; yes (115 count)
how to repair my phone????
i want to flash karnel but dont know exactly step by step?
i am tryng to downgrade to GB with tutorial on this forum but always says error (unable to pit partition)
THANKS for reply n your help....
Click to expand...
Click to collapse
Maybe the downloaded file is corrupted..Try flashing another baseband FW and check it.
For flashing kernels theres a SAFE AND FREE app
http://dl.xda-developers.com/attachdl/bca6a9b5a73472139b21ff4f2d7b4722/51a03873/1/9/0/2/9/3/1/Universal_Kernel_Flash_Tool_110.apk
Install this app and open it
Select the md5 or bin files from it and flash them and restart.
There you go...its done
I dont know about downgrading to GB..never tried and not gonna try it
MY JB is awesome:highfive:
narutosri said:
Maybe the downloaded file is corrupted..Try flashing another baseband FW and check it.
For flashing kernels theres a SAFE AND FREE app
http://dl.xda-developers.com/attachdl/bca6a9b5a73472139b21ff4f2d7b4722/51a03873/1/9/0/2/9/3/1/Universal_Kernel_Flash_Tool_110.apk
Install this app and open it
Select the md5 or bin files from it and flash them and restart.
There you go...its done
I dont know about downgrading to GB..never tried and not gonna try it
MY JB is awesome:highfive:
Click to expand...
Click to collapse
thanks for reply,,,
look my binary count (115) i was flashing with many different frimware
can you guide me step by step for repairing recovery mode????
THANKS
You can't enter recovery after flashing original fw via odin? Try taking out battery, put it back in and force recovery. Press it for a long time till it enter recovery. Then factory reset. I encountered this once on galaxy ace, endless bootloop and can't enter recovery but download is okay. Then I pressed the buttton until it somehow got into recovery. I don't know if this works but you can try though.
l_m_husni said:
thanks for reply,,,
look my binary count (115) i was flashing with many different frimware
can you guide me step by step for repairing recovery mode????
THANKS
Click to expand...
Click to collapse
We do not have any JB custom kernel that is flahsable with Odin. So I suppose you flashed GB custom kernel on JB, that is your problem. Flash whole STOCK JB FW again. After that use ONLY JB kernels. CoCore 6.x for example. Only one not abandoned from updates for now.
Do this again with JB, step by step: http://forum.xda-developers.com/showthread.php?t=2086965
And kernel: http://forum.xda-developers.com/showthread.php?t=2140597
Unzip it, put it on SD card, install Frapeti's universal kernel flasher. Install some ROOT explorer, this app needs it to work. Use it to install kernel.
Study content of this thread for future use: http://forum.xda-developers.com/showthread.php?t=2094318

Gt-n7000 brick

hello , i installed a custom rom on my device ( gt-n7000) and after sometime i wanted to go back to my original firmware and i installed it via odin
but now when i turn on my device it is stuck on loading screen it shows me the samsung logo . I still can go to download mode but i don't know what to do . Please help me .
ultrafan996 said:
hello , i installed a custom rom on my device ( gt-n7000) and after sometime i wanted to go back to my original firmware and i installed it via odin
but now when i turn on my device it is stuck on loading screen it shows me the samsung logo . I still can go to download mode but i don't know what to do . Please help me .
Click to expand...
Click to collapse
Go to recovery and do a factory reset and reboot. If that don't work u ve to be more specific about what custom rom u are on and what stock are u on
I can't go to recovery mod only on downloading mod N7000DDLSC_N7000ODDLSC_N7000DDLS6_HOME.tar.md5 this is the firmware i'm using via odin
and I used custom rom jellybam 8.0 .
This is the JB boot loop bug, just install the stock JB for your region and then flash the PhilZ kernel, you can find it in the original Android development forum. And after flashing the PhilZ kernel you're ready to go...hit thanks if i helped.
Varad297 said:
This is the JB boot loop bug, just install the stock JB for your region and then flash the PhilZ kernel, you can find it in the original Android development forum. And after flashing the PhilZ kernel you're ready to go...hit thanks if i helped.
Click to expand...
Click to collapse
i fixed it i only need to go to recovery mod by holdig the buttons for 20 seconds and to wipe data and that's all
thank you for your time anyway

E: [libs_mgr]Failed to open '/dev/block/dm-0': No such file or directory

please help me guys , my a71 stock in samsung logo, cant boot into system, and this message appear in recovery when i mounted/system, thank you
Have you tried flashing stock with Odin?
ShaDisNX255 said:
Have you tried flashing stock with Odin?
Click to expand...
Click to collapse
Yes sir, i done it many times, i flash stock rom downloaded from sammobile, successful flash via odin but still goes back into samsung logo
photo bellow, this errors is appear when i wipe data or wipe cache or mounted system
still cant fix thru flashing stock rom in odin, someone help
Did you ever get it fixed?

Categories

Resources