I recently rooted my lg revolution that was running android version 2.3.6. I installed clockwork mod which later caused my phone not to boot past the verizon logo. I installed LGNPST and firmware to solve my issue. I later was stuck in test mode. After I found a piece of software that fixed that issue, I am now stuck on android version 2.3.4. Everything works fine, but my phone is not recognized by Verizon Wireless (for OTA updates). I assume this is because something is wrong with the phone's info. Can anybody help me with fixing my phone so that it is out-of-the-box like new? I need to be able to take the OTA update.
Phone info:
Model: VS910 4G
Android Version: 2.3.4
Baseband version: VS910ZV7-M7X30-AABBQMLYM
Kernal version: 2.6.35.7-perf [email protected] #1
Build number: GRJ22
SW Version: VS910ZV7
ExtraEme said:
I recently rooted my lg revolution that was running android version 2.3.6. I installed clockwork mod which later caused my phone not to boot past the verizon logo. I installed LGNPST and firmware to solve my issue. I later was stuck in test mode. After I found a piece of software that fixed that issue, I am now stuck on android version 2.3.4. Everything works fine, but my phone is not recognized by Verizon Wireless (for OTA updates). I assume this is because something is wrong with the phone's info. Can anybody help me with fixing my phone so that it is out-of-the-box like new? I need to be able to take the OTA update.
Phone info:
Model: VS910 4G
Android Version: 2.3.4
Baseband version: VS910ZV7-M7X30-AABBQMLYM
Kernal version: 2.6.35.7-perf [email protected] #1
Build number: GRJ22
SW Version: VS910ZV7
Click to expand...
Click to collapse
Try using lgnpst and flash zv8 then try to update to zv9. If that doesnt work then try using mts method and put stock recovery back on the phone then lgnpst to zv8 and update to zv9. Mts method is found in development i believe. If that doesnt work then i have no more advice cuz i dont have this pos phone anymore. Thats just what i did before sending in my revo
Sent from my DROID4 using xda premium
Related
I was running cos-ds latest rom and accidently in rom manager hit install green rom now under about phone I dont have a firmware version or baseband. how do i restore these. the phone boots but always gives the error com.android.phone has stopped working and force close. i use this phone for work and it wont pick up a cell signal or let me into the network tab
Model: COS-DS
Android Version: 2.3.4
Baseband Version: unknown
Kernel Version: 2.6.36.4-s3-cos
Mod version COS-DS-07182011
Build #: GRJ22
where is the firmware version? the whole thing is missing?
Did you do nanodriod backup before you done that? If yes, just restore it back to the previous last backup.
or just wipe device and re-flash rom of choice
the firmware version would be 2.3.4... not sure why its called android version... but i don't think i flashed that rom so it may be different
Hi everyone!
I have a SGS (GT-I9000) that I would like to flash with cyanogenmod7. But despite having read quite a lot of stuff about flashing and so on the internet, I have to admit I am a noob, this is why I would need some advice
I had the phone with 2.2.1. I rooted it with the one click utility and unlocked it with the market app few months ago.
Then I flashed it with Darky's 9.5. After a while, I decided to upgrade it with darky's 10 rc6 but something went wrong (and I have no idea what it could be). Honestly, it has been a while now and I could not say what exactly happened, I can just tell you what I can read on my phone:
Firmware version:
2.3.3
Baseband:
I9000XXJVK
Kernel Version:
2.6.35.7-I9000XWJVB-CL118186
[email protected] #Dark_Core_2.0
Build number:
FICETO.GINGERBREAD.XWJVB
I noticed something which I think is curious. I just intalled Kies in order to get the drivers for the phone, and I received a message:
A new firmware version is available...
current version: PDA:JVB / PHONE:JVK / CSC:JV3
(NEE)
latest firmware version: PDA:JVH / PHONE:JVO / CSC:JV3
(NEE)
But I always thought that when you flashed a custom rom, Kies could not update your phone anymore ?
So do you think that I can just flash the rom in recovery following the guide on cyanogenmod's wiki or should I revert back to stock ?
Thank you for your attention.
Just flash cm. Backup your application with TB, factory reset and follow flashing guide.
If you encounter any problems, you can always flash to stock then.
Kallilol said:
Hi everyone!
I have a SGS (GT-I9000) that I would like to flash with cyanogenmod7. But despite having read quite a lot of stuff about flashing and so on the internet, I have to admit I am a noob, this is why I would need some advice
I had the phone with 2.2.1. I rooted it with the one click utility and unlocked it with the market app few months ago.
Then I flashed it with Darky's 9.5. After a while, I decided to upgrade it with darky's 10 rc6 but something went wrong (and I have no idea what it could be). Honestly, it has been a while now and I could not say what exactly happened, I can just tell you what I can read on my phone:
Firmware version:
2.3.3
Baseband:
I9000XXJVK
Kernel Version:
2.6.35.7-I9000XWJVB-CL118186
[email protected] #Dark_Core_2.0
Build number:
FICETO.GINGERBREAD.XWJVB
I noticed something which I think is curious. I just intalled Kies in order to get the drivers for the phone, and I received a message:
A new firmware version is available...
current version: PDA:JVB / PHONE:JVK / CSC:JV3
(NEE)
latest firmware version: PDA:JVH / PHONE:JVO / CSC:JV3
(NEE)
But I always thought that when you flashed a custom rom, Kies could not update your phone anymore ?
So do you think that I can just flash the rom in recovery following the guide on cyanogenmod's wiki or should I revert back to stock ?
Thank you for your attention.
Click to expand...
Click to collapse
Download the latest CM7 + Google App
Copy into your internal SDCARD
Boot into recovery
Do a full wipe Including (dalvik)
Install CM7
You may face boot loop then remove battery put it back and boot into recovery
Install the same zip file one more time
Optionally flash GoogleApp
Enjoy flashing
For flashing Video Guide
Could I get some guide to resolve my problem, please?
For the start, I have unlocked bootloader and rootet my Galaxy Note but I cannot get raid of the the Yellow Triangle with the black exclamation sign. However, the device works fine.
Just a moment ago, I received the notification to download the stock ICS update. It goes through the rituals of downloading but returns back to Gingerbread 2.3.6 after installation.
Baseband version: N7000XXLA4
Kernel version: 2.6.35.14-ver.4.2 ([email protected] #3
Please help me!
Regards
Danny
update:
After 2nd attempt, I received this message:
Software Update: Failed to update firmware. Try again using PC software (Kies) or visit a Samsung service centre)
I think you'll need to flash manually. Not sure if OTA updates work after flashing a different kernel than the default one
Thanks, lukasspro777
I am not entirely sure if the update is located on the sdcard though. I will check that. thanks
i believe there is a way to get rid of the yellow triangle but its risky its called triangle away you would have to search it then i would download the rom you want with something like checkfus and flash it with pc odin
@anubis1126
Many thanks. I am trying the firmware upgrade via Samsung Kies. I will check it out later. Regards
The problem with ICS updates is that they are non-wipe and assume everything is fine on the phone and when it isn't then you get problems.
I would flash XKL8 which does a full wipe and gets rid of errors then flash the non-wipe UK rom.
Sincere appreciation to all
@Gaugerer, @anubis1126 & @lukasspro777
The firmware upgrade via Samsung Kies resolved all my problems, including the removal of Yellow Triangle.
New Info include:
Android version 4.0.3
Baseband version: N7000XXLPT
Kernel version: 3.0.15-N7000XXLQ2-CL605927
[email protected] #3
SMP PREEMPT Tue May 22
Build number: IML74K.XXLQ2
Once again, my appreciation for the amazing forum by XDA-Developers and contributors.
regards
danny
I have a Droid 3 unlocked for use on GSM networks (T-Mobile). It had an old version of CM on it along with Safestrap 1.08d. I recently deleted that ROM and upgraded to Safestrap 3.05. I've been trying to install CM 10.1 or 10.2 with no luck. It just goes into a reboot loop every time. The stock ROM is still working just fine (using modified build.prop for GSM support). I've tried using different build.props with CM but it doesn't help.
At one point I got CM 10.1 to boot, but then I installed gapps and it stopped working. I have not been able to repeat this since.
Any ideas?
Stock ROM Information
System Version: 57.1.60.XT883.ChinaTelecom.en.CN
Android Version: 2.3.4
Baseband Version: n_34.18.16s
Kernel Version: [email protected] #1
Build Number: SLNCT-57.1.60
Looks like this is only an issue with Jelly Bean ROMs. I got Minimoto 1.7 working without any issues.
unlimitedbacon said:
I have a Droid 3 unlocked for use on GSM networks (T-Mobile). It had an old version of CM on it along with Safestrap 1.08d. I recently deleted that ROM and upgraded to Safestrap 3.05. I've been trying to install CM 10.1 or 10.2 with no luck. It just goes into a reboot loop every time. The stock ROM is still working just fine (using modified build.prop for GSM support). I've tried using different build.props with CM but it doesn't help.
At one point I got CM 10.1 to boot, but then I installed gapps and it stopped working. I have not been able to repeat this since.
Any ideas?
Stock ROM Information
System Version: 57.1.60.XT883.ChinaTelecom.en.CN
Android Version: 2.3.4
Baseband Version: n_34.18.16s
Kernel Version: [email protected] #1
Build Number: SLNCT-57.1.60
Click to expand...
Click to collapse
. You should just sbf back to stock then root & install safestrap 3.05 and start again fresh.
As in the title I think I messed up when I installed Twi5sted Lollipop; the phone shows the following:
Model Number: SM-G900T (Here I guess is where I messed up because afaik T is for TMobile while I should have A for AT&T)
Android Version: 5.0
Baseband: G900AUCU3BOC4
Kernel: 3.4.0-4432708
Build Number: Twi5ted Lollipop V-7
The phone has lost root and I cannot use Flashfire to install another ROM.
Is there any way to downgrade to stock ROM and then be able to root/flashfire again?
You should be able to I did it with mine 4x in one day trying to get the order right just use Odin to get back to stock and upgrade from there kind of a pain but I think I'm a pro at it now just be sure not to take the 5.1 Ota or you will b screwed
The model number listed in the settings is determined by build.prop, you can make it say butts if you want . I'm the dude who ported the rom, its a T-Mobile rom, therefore the build.prop has the model as g900t, that's fine. The "loosing root" problem you have is pretty easy to fix, you still have root SuperSU is just borked, try reinstalling it and tell me what happens.
Sent from my SAMSUNG-SM-G900A using Tapatalk
Yeah it worked thank for Tha info I love the rom for sure I was wanting to change my bootamation so I dwn loaded the sick bootamation flashed n it sends it into bootloop I've only been doing this for 3 months so I'm pretty new on the changing that stuff using terminal emulator n such