Related
@all
I am looking for stock rom with german language in it and the way to flash it to hone with this firmware ; (7.7.1Q-115_MB886_BELL_FFW-12)!
WBR
ReyTech.
ReyTech said:
@all
I am looking for stock rom with german language in it and the way to flash it to hone with this firmware ; (7.7.1Q-115_MB886_BELL_FFW-12)!
WBR
ReyTech.
Click to expand...
Click to collapse
I don't think we have a stock rom with German support.
What you could do is replace system apps/frameworks from a RAZR HD XT925 central europe rom/fastboot and add them into our stock Bell ICS you're using (or trying to use).....Essentially porting a German RAZR HD stock to Atrix HD.
Or one of those language apps from the market. I haven't ever used them, but they're supposed to add extra languages to devices...
skeevydude said:
I don't think we have a stock rom with German support.
What you could do is replace system apps/frameworks from a RAZR HD XT925 central europe rom/fastboot and add them into our stock Bell ICS you're using (or trying to use).....Essentially porting a German RAZR HD stock to Atrix HD.
Or one of those language apps from the market. I haven't ever used them, but they're supposed to add extra languages to devices...
Click to expand...
Click to collapse
tks, but is there any custom rom with german language in it! if yes then how do i go about it?
pls share!
WBR
ReyTech.
@skeevydude
i think i have bricked my device as i tried to load an AT&T (MB886_att-user-4.1.1-9.8.0Q-97_MB886_FFW-20-27-release-keys-ATT-US_BuildA.xml) and it stopped in boot.img and since then i tried to go back to the stock on which i was earlier and its not possible as i get this error
"Status:
"Failed flashing process. 1/23 flash partition "gpd_main0.bin -> Phone returned FAIL"
Result:
"FAIL"
and on screen i have this info;
"AP FASTBOOT flash mode (s)
10.9b(*) (sha-2e68372, 2012-11-17 23:33:00)
emmc info : size 8gb
device is locked. status code: 0
battery ok
transfer mode:
usb connected
partition (boot)security version downgraded
fastboot Reason :boot failure
usb connected
downgraded security version
update gpt_main version failed
preflash validation failed for gp1 "
i dont really have any idea much about mootorola's, but is it possible that i can do this;
1. unlock bootloader
2. load custom recovery
3. load custom rom
will this work? pls inform! or pls guide me to fix this error!
and how can i keep my phone's battery charged so that i can have enough battery to do all tis steps later?
WBR
ReyTech.
My phone has no network and it says no sim card. After further investigation it appears that this is because the IMEI number has just gone, it doesnt exist on the phone. It is standard I have never changed software so have no idea how this could happen. Tried factory reset but nothing works. Any ideas greatly appreciated.
Re flash stock firmware and it should come back
Sent from my Nexus 5 using Tapatalk
Flash it to stock.
Root it
Install es explorer or any root explorer
Install hex editor
In es explorer go to efs folder in root
Open nv_data.bin in hex editor
Goto position 00188020 and check. .
Sent from my GT-I9500 using XDA Premium HD app
amit.talukdar said:
Flash it to stock.
Root it
Install es explorer or any root explorer
Install hex editor
In es explorer go to efs folder in root
Open nv_data.bin in hex editor
Goto position 00188020 and check. .
Sent from my GT-I9500 using XDA Premium HD app
Click to expand...
Click to collapse
This is still not a Samsung forum.
Sent from my OmniROM-powered LG Optimus 4X HD
Try to pull dev/block/platform/sdhci-tegra.3/by-name/NVA
Open with text editor.
Check if imei is stored.
This partition is recreated on flashing dz/kdz. I am not sure if IMEI is read from here. If you give email i will send you my NVA partition to compare. Don't post it or people will see your IMEI
Sent from my LG-P880 using xda app-developers app
Hi...I have similar problem ...my LG-P880 dont show the IMEI and factory reset is also not working...as per above I have checked in NVA folder it cotains proper IMEI number...so any idea how to fix the situation...? Thanks in advnace...
jigneshandroid said:
Hi...I have similar problem ...my LG-P880 dont show the IMEI and factory reset is also not working...as per above I have checked in NVA folder it cotains proper IMEI number...so any idea how to fix the situation...? Thanks in advnace...
Click to expand...
Click to collapse
Try Flashing using either by KDZ or LG Flash tool it might help you,
Try below link for procedure of LG Flash Tool
http://forum.xda-developers.com/showthread.php?t=2179126
KDZ Method
http://forum.xda-developers.com/showthread.php?t=2069723
Read the steps and understand it properly,
Hit thanks button below,if this help you out
Good Luck:good:
Salman Al-Badgail said:
Try Flashing using either by KDZ or LG Flash tool it might help you,
Try below link for procedure of LG Flash Tool
http://forum.xda-developers.com/showthread.php?t=2179126
KDZ Method
http://forum.xda-developers.com/showthread.php?t=2069723
Read the steps and understand it properly,
Hit thanks button below,if this help you out
Good Luck:good:
Click to expand...
Click to collapse
Thanks for your guidance...I have tried both option but it get stuck in middle somewhere and not able to flash the kdz file.
So at this moment LG Mobile support tools not able to cross 10% in firmware update process and stops due to some error.
With KDZ update tools, same situation....and device can connect to adb terminal no other recovery mode options.
So using adb terminal is there any chances to do some fix ?
I think I have currupted my boot loader during installation of third party recovery software without doing boot loader unlock option.
Please guide or suggest any other try.....
Thanks
jigneshandroid said:
Thanks for your guidance...I have tried both option but it get stuck in middle somewhere and not able to flash the kdz file.
So at this moment LG Mobile support tools not able to cross 10% in firmware update process and stops due to some error.
With KDZ update tools, same situation....and device can connect to adb terminal no other recovery mode options.
So using adb terminal is there any chances to do some fix ?
I think I have currupted my boot loader during installation of third party recovery software without doing boot loader unlock option.
Please guide or suggest any other try.....
Thanks
Click to expand...
Click to collapse
How you get into this problem?
Give me your BL - status, Secondly try changing PC. Also let me know what ROM you were using before getting into this problem (Stock/Custom)
Thirdy Party softwares (recovery) like....?
If you just give us info, someone might help you properly. I am just a Junior Member here, helping you out the info i had.
[Edited : Sorry for my English, I am Arabic]
Salman Al-Badgail said:
How you get into this problem?
Give me your BL - status, Secondly try changing PC. Also let me know what ROM you were using before getting into this problem (Stock/Custom)
Thirdy Party softwares (recovery) like....?
If you just give us info, someone might help you properly. I am just a Junior Member here, helping you out the info i had.
[Edited : Sorry for my English, I am Arabic]
Click to expand...
Click to collapse
It was happened like......the phone was working ok with latest official updates V20A and suddenly lost the IMEI number so Mobile network also. After some try finally I have done factory reset..but it was not working as expected...some time it has shown IMEI but lost also...tried many time factory reset but not worked...so tried with LG Mobile repair under upgrade and recovery option but it was failing at 10 % everytime. So thought lets intall new ROM so decided to install cyanogonmod so for preparation rooted phone and installed CWM recovery ....as doing all this first time so may be forgot to unlock the bootloader so after installation of CWM recovery phone has not booted and also not going to recovery menu. After that under upgrade mode tried to burn KDZ file using LG mobile support tool but that also not working.
So now the situation is, the can only go in to firmware update mode and some time getting connected to adb terminal.
So now is there any change of BL repair through adb terminal or the only option remain is visit LG support....?
Please guide....
Thanks,
jigneshandroid said:
It was happened like......the phone was working ok with latest official updates V20A and suddenly lost the IMEI number so Mobile network also. After some try finally I have done factory reset..but it was not working as expected...some time it has shown IMEI but lost also...tried many time factory reset but not worked...so tried with LG Mobile repair under upgrade and recovery option but it was failing at 10 % everytime. So thought lets intall new ROM so decided to install cyanogonmod so for preparation rooted phone and installed CWM recovery ....as doing all this first time so may be forgot to unlock the bootloader so after installation of CWM recovery phone has not booted and also not going to recovery menu. After that under upgrade mode tried to burn KDZ file using LG mobile support tool but that also not working.
So now the situation is, the can only go in to firmware update mode and some time getting connected to adb terminal.
So now is there any change of BL repair through adb terminal or the only option remain is visit LG support....?
Please guide....
Thanks,
Click to expand...
Click to collapse
Did you check your BL status for now?
3845#*880#
Salman Al-Badgail said:
Did you check your BL status for now?
3845#*880#
Click to expand...
Click to collapse
At present phone is not booting so not able run any short cut commands....but before crash it was showing status locked...
I will try as per your message ...will update the results...
Thanks
jigneshandroid said:
At present phone is not booting so not able run any short cut commands....but before crash it was showing status locked...
I will try as per your message ...will update the results...
Thanks
Click to expand...
Click to collapse
Great, will be waiting for your answer
Salman Al-Badgail said:
Great, will be waiting for your answer
Click to expand...
Click to collapse
I am trying with the links you have provided to flash the ROM, but before I start it...getting problem to keep the device connected to USB port...in device manager on connection it shows connected under Ports but in few seconds it gets disconnected (like timeout)..so exploring how can I keep it connected so that can try the tools once more.
jigneshandroid said:
I am trying with the links you have provided to flash the ROM, but before I start it...getting problem to keep the device connected to USB port...in device manager on connection it shows connected under Ports but in few seconds it gets disconnected (like timeout)..so exploring how can I keep it connected so that can try the tools once more.
Click to expand...
Click to collapse
Did you downloaded the files??
Install Drivers and follow the steps properly,
this should work for you to keep connected,
One more thing run drivers and flashtool as administrator, I already PM you.
Still having problems, please let me know.
If your phone is still not booting, I am afraid that you bricked it.
Good Luck
Salman Al-Badgail said:
Did you downloaded the files??
Install Drivers and follow the steps properly,
this should work for you to keep connected,
One more thing run drivers and flashtool as administrator, I already PM you.
Still having problems, please let me know.
If your phone is still not booting, I am afraid that you bricked it.
Good Luck
Click to expand...
Click to collapse
I am able connect my device to LGFlashTool on com Port1 but download fails with below log on port1
StartDownload()
Saved result to XML file.
Failure : 207
FAIL
and same thing repeating as software retries the same.
Can somebody guide what is this situation ?
Thanks and best regards,
Jignesh
jigneshandroid said:
I am able connect my device to LGFlashTool on com Port1 but download fails with below log on port1
StartDownload()
Saved result to XML file.
Failure : 207
FAIL
and same thing repeating as software retries the same.
Can somebody guide what is this situation ?
Thanks and best regards,
Jignesh
Click to expand...
Click to collapse
Post a screenshot so that anyone could help you.
jigneshandroid said:
I am able connect my device to LGFlashTool on com Port1 but download fails with below log on port1
StartDownload()
Saved result to XML file.
Failure : 207
FAIL
and same thing repeating as software retries the same.
Can somebody guide what is this situation ?
Thanks and best regards,
Jignesh
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=2179126
Try using post #7 by RuedasLocas
and read it untill you get it.
:good:
Salman Al-Badgail said:
http://forum.xda-developers.com/showthread.php?t=2179126
Try using post #7 by RuedasLocas
and read it untill you get it.
:good:
Click to expand...
Click to collapse
OK..thanks I will check this post whether somebody has reported similar problem...do you mean page 7 is it ?
:good:
jigneshandroid said:
OK..thanks I will check this post whether somebody has reported similar problem...do you mean page 7 is it ?
:good:
Click to expand...
Click to collapse
Page 1 -> post #7 by RuedasLocas
Hi. I am in the UK and have the first gen moto x. i was dicking around with roms etc and i ended up accidentally erasing internal storage. I managed to the get the phone back to how it was apart from the fact that it cannot make calls, text, get 3g signal. it is essentially a small tablet. when i use the dialler code to show the imei number it is 0. i tried reinstalling modems etc and none have worked. i have tried differnet roms and even flashing lollipop. I am wondering if the modems files i am using are not working because they are US files and I need some kind of EU file? Idk.
I had my imei written down so i was going to try and change it to that on the phone but engineer tools does not open or even seem to exist on the phone. i cant try using the stock rom etc because it is on a site (something like sbf developers ) that says it is forbidden. i literally have tried everything. can anyone help? :crying:
azerouz said:
Hi. I am in the UK and have the first gen moto x. i was dicking around with roms etc and i ended up accidentally erasing internal storage. I managed to the get the phone back to how it was apart from the fact that it cannot make calls, text, get 3g signal. it is essentially a small tablet. when i use the dialler code to show the imei number it is 0. i tried reinstalling modems etc and none have worked. i have tried differnet roms and even flashing lollipop. I am wondering if the modems files i am using are not working because they are US files and I need some kind of EU file? Idk.
I had my imei written down so i was going to try and change it to that on the phone but engineer tools does not open or even seem to exist on the phone. i cant try using the stock rom etc because it is on a site (something like sbf developers ) that says it is forbidden. i literally have tried everything. can anyone help? :crying:
Click to expand...
Click to collapse
Hey! If you've installed a US ROM, you are using the wrong baseband files to access your service provider network ( XT1053- US ; XT1052- UK)
Try installing an XT1052 based rom and report back . Also, be careful while flashing your new chosen ROM. Ensure that it does not downgrade / modify your current bootloader as you may end up bricking your phone (since you've upgraded to LP)
Best of luck mate .
Bhargav4591 said:
Hey! If you've installed a US ROM, you are using the wrong baseband files to access your service provider network ( XT1053- US ; XT1052- UK)
Try installing an XT1052 based rom and report back . Also, be careful while flashing your new chosen ROM. Ensure that it does not downgrade / modify your current bootloader as you may end up bricking your phone (since you've upgraded to LP)
Best of luck mate .
Click to expand...
Click to collapse
Ty for the reply. I just tried flashing a rom for the 52 instead of the 53 and twrp gives an error message of "This package is for the device: xt1052 ghost, xt1052 ghost etc.. this device is ." the etc is just a couple more models but the device doesnt seem to know what it is? its saying becuase it is for the 52 it cannot install even though the device is the 52.
azerouz said:
Ty for the reply. I just tried flashing a rom for the 52 instead of the 53 and twrp gives an error message of "This package is for the device: xt1052 ghost, xt1052 ghost etc.. this device is ." the etc is just a couple more models but the device doesnt seem to know what it is? its saying becuase it is for the 52 it cannot install even though the device is the 52.
Click to expand...
Click to collapse
Strange . Do elaborate as to what rom you are flashing and which rom you are currently using (The one that has a problem).
Also, are you wiping the system before flashing ?
Bhargav4591 said:
Strange . Do elaborate as to what rom you are flashing and which rom you are currently using (The one that has a problem).
Also, are you wiping the system before flashing ?
Click to expand...
Click to collapse
Hi again. i googled xt1052 rom and found a few. the one i tried was cyanhacker(obviously based on cm). after i got that error i tried editing the updater script to skip over the process in which it checks what device it is on. after that it appeared to flash successfully but when i tried to boot it showed the bootloader unlocked screen, vibrated then restarted and just kept doing that bootloop.
azerouz said:
Hi again. i googled xt1052 rom and found a few. the one i tried was cyanhacker(obviously based on cm). after i got that error i tried editing the updater script to skip over the process in which it checks what device it is on. after that it appeared to flash successfully but when i tried to boot it showed the bootloader unlocked screen, vibrated then restarted and just kept doing that bootloop.
Click to expand...
Click to collapse
1. Please download the correct ROM for your device from here: http://forum.xda-developers.com/moto-x/general/official-collection-firmwares-fxz-sbf-t3146628
2. Head over here: http://forum.xda-developers.com/moto-x/general/guide-moto-x-return-to-100-stock-using-t2446515 and follow the Instructions. CAUTION: If you decide yourself for manual flashing DO NOT PASTE THIS CODE:
Code:
fastboot oem config carrier vzw
Or you'll end up, like me: http://forum.xda-developers.com/moto-x/moto-x-qa/carrier-retail-devices-t3174988
In case I could help you with some guidance, I would be happy, if you could help me, in my thread.
//EDIT: Your battery should be on 70% or more, before you try to do anything! Keep this in mind, else flashing could be interrupted!
Kind regards
Xanthales said:
1. Please download the correct ROM for your device from here: http://forum.xda-developers.com/moto-x/general/official-collection-firmwares-fxz-sbf-t3146628
2. Head over here: http://forum.xda-developers.com/moto-x/general/guide-moto-x-return-to-100-stock-using-t2446515 and follow the Instructions. CAUTION: If you decide yourself for manual flashing DO NOT PASTE THIS CODE:
Code:
fastboot oem config carrier vzw
Or you'll end up, like me: http://forum.xda-developers.com/moto-x/moto-x-qa/carrier-retail-devices-t3174988
In case I could help you with some guidance, I would be happy, if you could help me, in my thread.
//EDIT: Your battery should be on 70% or more, before you try to do anything! Keep this in mind, else flashing could be interrupted!
Kind regards
Click to expand...
Click to collapse
Thankyou so much. did what you said. tinkered in twrp. flashed a lollipop rom and made a call. My man right here <3
azerouz said:
Thankyou so much. did what you said. tinkered in twrp. flashed a lollipop rom and made a call. My man right here <3
Click to expand...
Click to collapse
No problem, im glad to hear, that I could help you!
Maybe you can help me here?: http://forum.xda-developers.com/moto-x/moto-x-qa/carrier-retail-devices-t3174988
This would be awesome, if you got a retail device!
We all know many people still get this problem but not yet fixed, yeah mee too :crying: , but today I want I'm and other people want to hardwork together to make this fixed.
So, before it , thanks to @FrozenTears also to try for first time to fixed this but some report result us still not working.
Now let me try too...
Required:
1. Rooted phone
2. "Terminal" already installed
Download this file
1. Extract to /storage/sdcard1/ (your Memory Card), so the path will be : /storage/sdcard1/partition/
2. Open Terminal in your android phone, type this:
First, u will need to enter the root acces, so type:
Code:
$ su
file misc.img
Code:
# dd if=/storage/sdcard1/partition/misc.img of=/dev/mmcblk0p22
file persist.img
Code:
# dd if=/storage/sdcard1/partition/persist.img of=/dev/mmcblk0p18
file modem.img
Code:
# dd if=/storage/sdcard1/partition/modem.img of=/dev/mmcblk0p1
then, reboot
Code:
# reboot
and let's see are this will working or not ...
not working bro
nokia x2ds
Dear bro shall i do it with sim inserted r exerted .
---------- Post added at 05:07 PM ---------- Previous post was at 04:19 PM ----------
Not workinr bro
Not working
Someone told me this might be a motherboard problem
Zaidmughal said:
Someone told me this might be a motherboard problem
Click to expand...
Click to collapse
But, how can the software can be affected to motherboard just because we got flashing Wrong ROM? :| I think the exact problem still on our software.
i just flashed the lolipop rom for x2 2times then the 3rd time sims got offline bro
any help??
lollipop rom link: http://forum.xda-developers.com/nokia-x2/development/nokia-ara-t3129374
T4ufik_Hidayat said:
But, how can the software can be affected to motherboard just because we got flashing Wrong ROM? :| I think the exact problem still on our software.
Click to expand...
Click to collapse
Yes I asked that guy about it and he said software can damage hardware. And ik we got the problem by flashing a wrong ROM hope u will fix it and if it is not HW issue. Best of luck bro......
Bro, Iam Indonesian too.
My SIMcard cannot detect any contact. What should I do fix this issue?
---------- Post added at 01:20 AM ---------- Previous post was at 12:41 AM ----------
Thanks bro, It works
Guys, please reflash your ROM, put your simcard and apply this method.
sending from my Nokia X2 CM 11 ara
Nokia x2ds offline sim problem
Plz help me guys i have the same problem with m'y phone . i have instlled cm12 ans m'y phone didnt détection sim . next i tryed to ecrase imei1 imei2 to put it another time next i find my phone offline and cant show signal of operator sim . and i find my name's phone changed to ara . plz anyone can help me ???
Sims Offline
I do all this but not working brother.
Not working for me
I've tried this but no luck. Maybe i should reflash the rom after the process?
hi ,in china can not download,can you upload this : https://www.androidfilehost.com/ ,thank Q
work 4 me
My solution work 100%:
1-> flash Pac-Man v4.3
2-> wipe /system /data /cache /dalvik, all
3-> flash daily driver version of your choice
done
Virgo Sun said:
My solution work 100%:
1-> flash Pac-Man v4.3
2-> wipe /system /data /cache /dalvik, all
3-> flash daily driver version of your choice
done
Click to expand...
Click to collapse
Dude.. i have search pac man rom 4.3 and i cant found it.. would you like share the link?... i hope this can help us...
Agusgamasy said:
Dude.. i have search pac man rom 4.3 and i cant found it.. would you like share the link?... i hope this can help us...
Click to expand...
Click to collapse
There u go https://drive.google.com/file/d/0BzvN5qtn_oucNUdEV0JXWUtQRk0/view
So should i flash it using care suit? I has been flash that rom and flash all the img.. but still same..
Agusgamasy said:
So should i flash it using care suit? I has been flash that rom and flash all the img.. but still same..
Click to expand...
Click to collapse
It works for me. I use TWRP
Just flash the whole zip. I dont care about img
Dont you see at least this rom enable radio immediately after flashing
Virgo Sun said:
It works for me. I use TWRP
Click to expand...
Click to collapse
Me too... i use twrp 3.00... i flash the pac rom... and flash all img... but still same... not work... hah.. mybe i should flash it using nokia care suit but theres problem when logging in care suit server... Its that tru microsoft has benn stop suport the nokia x series? So i could use nokia software recovery and i dont know where i should download the firmware...
T4ufik_Hidayat said:
We all know many people still get this problem but not yet fixed, yeah mee too :crying: , but today I want I'm and other people want to hardwork together to make this fixed.
So, before it , thanks to @FrozenTears also to try for first time to fixed this but some report result us still not working.
Now let me try too...
Required:
1. Rooted phone
2. "Terminal" already installed
Download this file
1. Extract to /storage/sdcard1/ (your Memory Card), so the path will be : /storage/sdcard1/partition/
2. Open Terminal in your android phone, type this:
First, u will need to enter the root acces, so type:
file misc.img
file persist.img
file modem.img
then, reboot
and let's see are this will working or not ...
Click to expand...
Click to collapse
Can someone please provide stock flashable zip or img of other NokiaX2DS partitions which might be intentionally or unintentionally possibly affected during custom ROM installations?
How to Restore a Bricked x620-x626
with all the necessary tools + VIDEO GUIDE
Red state after invalid commands entered in the fastboot mode, after installing Twrp, etc..
The first time I broke the phone after I entered the wrong commands after installing twrp. long tormented to restore. It was necessary to use roms x620, first of all, but after installing this firmware, the screen could be viewed through the mirror.
*after such torment, I thinked, and what prevents me from making (assembling), firmware on version 28, and also without dancing .. screen 180 and mirror..
I used a firmware (stock ROM) s28 for Flashtool for all versions of x620-x626 without upside-down screen, etc.
The archive contains: Video instruction (Russian, English), drivers, firmware, installer TWRP 3.1.1, Super SU, disabling Orange State. A complete set.
1. Section Userdata I did not touch, because probably you need your files (without its firmware)
2. This method (firmware for recovery) is tested on the devices: > 10-x626, 1-x622 with success.
3. Used Stock ROM S28
4. Imei, Nvram will remain untouched!!!
_____________________________________________
Google drive
http://drive.google.com/open?id=1kOAYXA-8SVg8Zx0-OaTLwk0cREHqPG1j
_____________________________________________
Yandex
http://yadi.sk/d/wqqZN_ti3SjqKM
_____________________________________________
If you can’t restore the phone, use the firmware from this post.
Problematic are x620 and x625.
https://forum.xda-developers.com/showpost.php?p=82402861&postcount=66
Repair IMEI
https://forum.xda-developers.com/showpost.php?p=82446181&postcount=68
Brick Restoration | Flashtool | S28 | x620-x626
author: Kychera22
How to Restore a Bricked x620-x626
with all the necessary tools + VIDEO GUIDE
--------------------------------------------------------------
Google Drive
https://drive.google.com/file/d/1kOAYXA-8SVg8Zx0-OaTLwk0cREHqPG1j/view
--------------------------------------------------------------
Yandex
https://yadi.sk/d/wqqZN_ti3SjqKM
--------------------------------------------------------------
Thanks for the help!!!: D
Kychera22 said:
Thanks for the help!!!: D
Click to expand...
Click to collapse
Great work!!!
Added to favorite.:good:
Shekor said:
Added to favorite.:good:
Click to expand...
Click to collapse
Everything is for you!!
reboot
hallo..i got a x626...followed the procedure exactlly like you said....but after i installed twrp my phone reboot no more to system....please help me...what should i do...i can enter recovery and also fastboot....but my phone dont open up...is stucked with the sign leeco....and down powered by android
dicknorbert said:
hallo..i got a x626...followed the procedure exactlly like you said....but after i installed twrp my phone reboot no more to system....please help me...what should i do...i can enter recovery and also fastboot....but my phone dont open up...is stucked with the sign leeco....and down powered by android
Click to expand...
Click to collapse
you need to install supersu (root)
without this phone will not start.
Thx
Thank you so much ....now everything is good....
Kychera22 said:
How to Restore a Bricked x620-x626
with all the necessary tools + VIDEO GUIDE
Red state after invalid commands entered in the fastboot mode, after installing Twrp, etc..
The first time I broke the phone after I entered the wrong commands after installing twrp. long tormented to restore. It was necessary to use roms x620, first of all, but after installing this firmware, the screen could be viewed through the mirror.
*after such torment, I thinked, and what prevents me from making (assembling), firmware on version 28, and also without dancing .. screen 180 and mirror..
I used a firmware (stock ROM) s28 for Flashtool for all versions of x620-x626 without upside-down screen, etc.
The archive contains: Video instruction (Russian, English), drivers, firmware, installer TWRP 3.1.1, Super SU, disabling Orange State. A complete set.
1. Section Userdata I did not touch, because probably you need your files (without its firmware)
2. This method (firmware for recovery) is tested on the devices: > 10-x626, 1-x622 with success.
3. Used Stock ROM S28
4. Imei, Nvram will remain untouched!!!
_____________________________________________
Google drive
http://drive.google.com/open?id=1kOAYXA-8SVg8Zx0-OaTLwk0cREHqPG1j
_____________________________________________
Yandex
http://yadi.sk/d/wqqZN_ti3SjqKM
Click to expand...
Click to collapse
Good afternoon
I have already downloaded the file of the two links and all give the message of unknown or damaged file
brunoaraujo1980 said:
Good afternoon
I have already downloaded the file of the two links and all give the message of unknown or damaged file
Click to expand...
Click to collapse
Good evening. Use 7zip or the latest version of winrar.
Kychera22 said:
Good evening. Use 7zip or the latest version of winrar.
Click to expand...
Click to collapse
good night was just that, I downloaded the current winrar version and it flowed perfectly. Thank you so much
Is it possible to get a rom from you with a NVRAM re-write?
My problem is that for more than an year now my phone is dead with BaseBand Unknown.
I can't do anything since the phone won't connect to MAUI META which would be the only possible solution to re-write a new NVRAM.
Can you help me?
laikexpert said:
Brick Restoration | Flashtool | S28 | x620-x626
author: Kychera22
How to Restore a Bricked x620-x626
with all the necessary tools + VIDEO GUIDE
--------------------------------------------------------------
Google Drive
https://drive.google.com/file/d/1kOAYXA-8SVg8Zx0-OaTLwk0cREHqPG1j/view
--------------------------------------------------------------
Yandex
https://yadi.sk/d/wqqZN_ti3SjqKM
--------------------------------------------------------------
Click to expand...
Click to collapse
Pangadaywalker said:
Is it possible to get a rom from you with a NVRAM re-write?
My problem is that for more than an year now my phone is dead with BaseBand Unknown.
I can't do anything since the phone won't connect to MAUI META which would be the only possible solution to re-write a new NVRAM.
Can you help me?
Click to expand...
Click to collapse
do you have nvram.img? or backup?
Unfortunately i don't. And the phone is dead for over and year. Can you please help me.
Pangadaywalker said:
Is it possible to get a rom from you with a NVRAM re-write?
My problem is that for more than an year now my phone is dead with BaseBand Unknown.
I can't do anything since the phone won't connect to MAUI META which would be the only possible solution to re-write a new NVRAM.
Can you help me?
Click to expand...
Click to collapse
I also having same problem with my X626. Still haven't found any solution to fix unknown baseband. Anyone have solution to fix this problem?
mimossmart2 said:
I also having same problem with my X626. Still haven't found any solution to fix unknown baseband. Anyone have solution to fix this problem?
Click to expand...
Click to collapse
If you problem is not like mine, where the baseband is totally screwed, you just need to install the required windows drivers, and get Maui Meta to write a new baseband on the phone.
That will solve your problem.
Mine is a bit more complicated, where the Maui Meta won't detect the phone. I believe only writing the nvram with a special box to fix it. So basically my phone is screwed.
Pangadaywalker said:
Is it possible to get a rom from you with a NVRAM re-write?
My problem is that for more than an year now my phone is dead with BaseBand Unknown.
I can't do anything since the phone won't connect to MAUI META which would be the only possible solution to re-write a new NVRAM.
Can you help me?
Click to expand...
Click to collapse
Pangadaywalker said:
If you problem is not like mine, where the baseband is totally screwed, you just need to install the required windows drivers, and get Maui Meta to write a new baseband on the phone.
That will solve your problem.
Mine is a bit more complicated, where the Maui Meta won't detect the phone. I believe only writing the nvram with a special box to fix it. So basically my phone is screwed.
Click to expand...
Click to collapse
MAUI meta won't detect my phone. Tried restoring stock rom & custom rom, SN Writer, MTK droid tools but no luck at all. I'm still stuck with unknown baseband now.
Any ideas how I can get back my baseband?
mimossmart2 said:
MAUI meta won't detect my phone. Tried restoring stock rom & custom rom, SN Writer, MTK droid tools but no luck at all. I'm still stuck with unknown baseband now.
Any ideas how I can get back my baseband?
Click to expand...
Click to collapse
I believe the only way is to use one of those machines from China to write direct to the memory. Unfortunately i have the sane issue and i tried everything for the last year. It just won't work.
Pangadaywalker said:
I believe the only way is to use one of those machines from China to write direct to the memory. Unfortunately i have the sane issue and i tried everything for the last year. It just won't work.
Click to expand...
Click to collapse
Did you get any solution?
I have the same problem with the NVRAM