[Q] Half Brick - Galaxy S I9000 Q&A, Help & Troubleshooting

Hi, I have a problem with i9000 I had on it AOKP with glitch kernel and decided to go back to backup from stok firmware made in CWM 3.0.0.5 I think and now Phone is stuck on galaxy s logo. I can go to recovery but it cant mount any partition so I cant do anything. Could someone guide me how to fix this? Do I need to flash something through odin?

You can't replace a Samsung based Rom over aosp / nightly/aokp, the partition layouts are different..... flash stock with .pit with Odin/heimdall

Ok good to know that ;] Can I have a link to some stock rom and all files needed? I'm New to galaxy s so will need a little help with it. My phone was on XXJVT does it make any difference?

Thanked you by accident! Samfirmware.com

Ok there are a lot of them there is there any difference? I mean can I use I9000XWJW7 when I had I9000XXJVT ?

macia10 said:
Ok there are a lot of them there is there any difference? I mean can I use I9000XWJW7 when I had I9000XXJVT ?
Click to expand...
Click to collapse
You should be fine with any firmware that is listed for your region
We do have a thanks button

No worries I'm not new on this forum I'm just new to sgs. And thanks for your help ;] Phone is booting up now

Related

[Q] reverting to stock Tab

hi
before posting I was trying to find an answer, but I couldn't.
i'm planning to sell my Tab and I want to revert from ext 4, custom firmware and CWM recovery to original Tab as was from factory ! is there any possibility to do that? thanks in advance !
For tmobile. http://www.youtube.com/watch?v=kzi_U-fH5Us
You need to find the stock rom files and run them through Heidmall, no big deal as long as you can find the stock rom files.
dirtyhandz305 said:
For tmobile. http://www.youtube.com/watch?v=kzi_U-fH5Us
Click to expand...
Click to collapse
i don't have a Tmobile tab. is European version free carrier!
Bobby Buggs said:
You need to find the stock rom files and run them through Heidmall, no big deal as long as you can find the stock rom files.
Click to expand...
Click to collapse
is stock rom the one from here ? if yes, how about the Stock recovery? thanks !
problem solved! just download the stock eu firmware from http://www.samfirmware.com/WEBPROTECT-p1000.htm, flash with PIT file via Odin....and everything goes back to factory !
How to do a Stock recovery? I have a Telstra Galaxy Tab.
udeshplus said:
How to do a Stock recovery? I have a Telstra Galaxy Tab.
Click to expand...
Click to collapse
I did not... in my case, my TAB is not branded, so I used JMI stock from the above link. I unzip the file and the results file I just added in Odin together with PIT file and that's all. System reverting to stock, also CWM was replace d with stock recovery.
there is a video tutorial posted on Youtube (is for T-mobile, but was the same procedure for me). hope it helps!
Need Help "Stuck on bootup
can Someone help me please, I have rooted Galaxy tab and today I tried to flash Arabic Rom. It did load every thing and Odin said Pass and it was green. But since then I only can get to "GalaxyTab Samsung" boot screen. doesnt let me to go to recovery mode. only can turn it off and can also go to Download and connect to PC.
I did try to flash it many time. but its the same after finishing flash, it only goes to first boot screen and stuck
You most likely have an ext4 rom and rfs kernel, or vise versa.
If it's stock kernel, than you have an ext4 rom most likely.
My best guess is you need to convert your kernel to ext4.
Sent from my "way better than an iPad" tab.

[Question] Help needed and advice regarding upgrading my firmware please.

Hi everyone, I am brand new sgs owner and first time smart phone user and I upgraded my phones firmware on kies to 2.3.3 / baseband xxjvo / build number gingerbread.xwjvh
I been talking to a few people that have got 2.3.4 and cyanogen mod 7. And I really want to get one of them because my battery life is pathetic on 2.3.3
I have an idea how to do it (I have watched alot of tutorials) but what is confusing me is all the different downloads like cwm and speed mod, kernals, ROMS. All these terms are driving me mad as I dont know if I need to flash this stuff first to upgrade the firmware.
I have been told I may or may not need to root my phone to make it all work because of the current firmware xxjvo 2.3.3?? So what do i do?
Can I just flash a new firmware on via odin? or do i need to flash diff kernals or clockwork mod or speed mod what ever they are to make it work properly.
Im sure its all easy enough once its understood but I cant find basic explanations for all these terms.
I really dont want to mess up my phone but i know I can get this done once i know how.
So could someone that knows please tell me once off, what do I have to do to upgrade from gingerbread 2.3.3 xxjvo to something better like cm7 or 2.3.4.
Do I need to root first? install CWM or speed mod or whatever.
Also what is CWM and speed mod. are the roots?
Sorry for not knowing anything as i said its my first smart phone and I want to get to know how to use it to its full extent
Will greatly appreciate any advice/ help given.
If some ones going to help me could they post the links to the downloads that i will need.
Thanks very much
1.its simple root ur fone first via odin and then flash the voodoo/fugumod lagfix(incase ur experience any lag)
2.Download Rom Mgr premium and download (cyanogen mod7 ,nightlies or watever)
3.Take a backup using Mybackuppro or titanium backup before u flash cm7
4.Go to Rom Mgr Premium and then install the rom of ur choice and also make sure u check GAPPS(if u want gmail, market an all crap)
I m a newbie 2 Galaxy S myself, but i have quite som experience on rooting other fones
darkkid85 said:
1.its simple root ur fone first via odin and then flash the voodoo/fugumod lagfix(incase ur experience any lag)
2.Download Rom Mgr premium and download (cyanogen mod7 ,nightlies or watever)
3.Take a backup using Mybackuppro or titanium backup before u flash cm7
4.Go to Rom Mgr Premium and then install the rom of ur choice and also make sure u check GAPPS(if u want gmail, market an all crap)
I m a newbie 2 Galaxy S myself, but i have quite som experience on rooting other fones
Click to expand...
Click to collapse
Thanks for the reply but what is rom mgr? and must i pay for it if its premium
And what is the download for the correct root I have seen a thread by chainfire with hundreds of root downloads but I dont know what one to use.
Is a ROM the same thing as a firmware?
sgsnoob325 said:
Thanks for the reply but what is rom mgr? and must i pay for it if its premium
And what is the download for the correct root I have seen a thread by chainfire with hundreds of root downloads but I dont know what one to use.
Is a ROM the same thing as a firmware?
Click to expand...
Click to collapse
go to market- download rom mgr( dl Premiu m if u wanna support the dev)
1.From Rom Mgr-Download rom-Dwnload watever u want
Alt way to flash a Rom
1.Downlaod cyanogen mod7 or watever ( from one of the sites) and dump on ur Sd card ( My S does not have a SD ) and once ur in recovery apply update from zip card 2 flash the rom
darkkid85 said:
go to market- download rom mgr( dl Premiu m if u wanna support the dev)
1.From Rom Mgr-Download rom-Dwnload watever u want
Alt way to flash a Rom
1.Downlaod cyanogen mod7 or watever ( from one of the sites) and dump on ur Sd card ( My S does not have a SD ) and once ur in recovery apply update from zip card 2 flash the rom
Click to expand...
Click to collapse
so I dont need to use odin at all??
Do I still need to root the phone before I can flash cm7 from sd card? Do I put it on internal or external sd card? And If so what root do I use for my particular firmware
Anybody? ? Someone must be able to help me
Here are some posts I think will help u find some answers,
Download mode is HOME BUTTON+VOL DOWN+POWER BUTTON
Recovery mode is HOME BUTTON+ VOL UP+POWER BUTTON
1 Android ROM and rooting dictionary: all the terms explained
2 A link explaining how to flash a custom Rom via Odin and their downloads.
3 Deodexed Stock roms
Hope this helps. By the way all these are custom rom lists and not samsung stock firmware.
DonVito2020 said:
Here are some posts I think will help u find some answers,
Download mode is HOME BUTTON+VOL DOWN+POWER BUTTON
Recovery mode is HOME BUTTON+ VOL UP+POWER BUTTON
1 Android ROM and rooting dictionary: all the terms explained
2 A link explaining how to flash a custom Rom via Odin and their downloads.
3 Deodexed Stock roms
Hope this helps. By the way all these are custom rom lists and not samsung stock firmware.
Click to expand...
Click to collapse
Thank you for the reply. Is cm7 a custom Tom?
How safe is it to use a custom rom instead of a Samsung rom.
Can some one tell me is there a particular order I need to follow to upgrade my phones firmware.
Like root then something else followed by the firmware.
Could I upgrade from xxjvo without rooting?
Again sorry all the questions I feel like a dumbass.
Thanks
Double post
Again sorry for being persistent but could someone give be a step by step quire to upgrading my current firmware xxjvo 2.3.3 to something better for battery and better radio signal.
Must the phone be rooted first? Must I install anything else before or after the new firmware
Thanks
Hi, check out samfirmware.com to download stock 2.3.4
I'm on the newest jvr, and my battery is good.
It's also flash manuals there for how to use odin.
thats the safest!
If you want root permission, you can flash cfroot kernel after the rom.
Edit: i'm on the oldest 2.3.4 jvr, looks like it came a new relese today.
Sent from my GT-I9000 using Tapatalk
RobertSand said:
Hi, check out samfirmware.com to download stock 2.3.4
I'm on the newest jvr, and my battery is good.
It's also flash manuals there for how to use odin.
thats the safest!
If you want root permission, you can flash cfroot kernel after the rom.
Edit: i'm on the oldest 2.3.4 jvr, looks like it came a new relese today.
Sent from my GT-I9000 using Tapatalk
Click to expand...
Click to collapse
Is a specific ROM needed to run a different firmwares? or vice verse?
If I flashed 2.3.4 does that mean I have a new ROM or new firmware or both?
thanks
Pls do refer my previous post for upgrading to 2.3.4 GB roms (2)
2.3.4 roms are way better for battery. There are some light weight roms with excellent battery life eg SURFACE,Matrux rom, Juwe's Smart Edition(My Pick) etc
You dont need to be rooted to flash a custom rom via ODIN.
CM7 is a custom rom and I would recommend it only if you know what u r doing. Its not very advisable for a noob (imho).
There is insanity cm7 034 with gb boot loaders [ROM] insanity CM 034 [16.08.2011] - Multi DPI But its in heavy dev stage. Pls go through their thread before flashing it.
Here is the EZBOOt link
Install or upgrade at your own risk.
help me to upgrade galaxy s
anybody is there for help me

Question for flashing I9001

Hello,
I hope it's not the wrong section, but the others are I9000.
I want to flash an I9001. The phone is on 2.3.3 I though.
I've root the phone, now I can go to 2.3.6 by flashing a rom in recovery or do i need to go to 2.3.6 first?
Greetz,
ikkuh007 said:
Hello,
I hope it's not the wrong section, but the others are I9000.
I want to flash an I9001. The phone is on 2.3.3 I though.
I've root the phone, now I can go to 2.3.6 by flashing a rom in recovery or do i need to go to 2.3.6 first?
Greetz,
Click to expand...
Click to collapse
You need to flash (for example) KQ7 with Odin, this updates the whole base of the rom, most new roms are build on KQ7 base so I think that's the right one for you
btw this is the wrong section, i9000 Q&A is the right section
I think we go for broodrom.
But it's important to get first to 2.3.6 stock? Or can we flash the rom directly by odin?
As an ODIN stock ROM also includes modem binaries that we cannot flash over recovery, it is a good idea to get to the latest stock ROM with ODIN and then start with custom ROMs over FeaMod recovery (it's basically CWM). If you have already the latest stock ROM on your 9001, you can use whatever method you prefer.
I think recovery is quicker and easier to use as you don't need a pc near you.
And which last stock 2.3.6 we can flash the best? We live in Holland..., don't know it is important?
ikkuh007 said:
And which last stock 2.3.6 we can flash the best? We live in Holland..., don't know it is important?
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=1533029
broodplank1337 said:
http://forum.xda-developers.com/showthread.php?t=1533029
Click to expand...
Click to collapse
Thank you!

Error while flashing Rom with CWM

hi.
i have an Australian N7000B Note, and it is currently rooted on the latest available android in the country for the phone (2.3.6)
i have superuser and CWM installed.
i can boot into CWM and navigate with no worries, but whenever i try to install any custom rom, regardless what rom it is, i get the same error.
i really want to get off this crappy rom that Telstra provides with the phone, so any help is greatly appreciated.
many thanks
pic attatched of error.
Use ODIN to flash a stock ICS or GB ROM and then re-root and add cwm and try again
the issue you face is because your version is the GT-N7000B and the build.prop is for the GT-N7000 so its failing because it believes the ROM is for a different device.
if the product codes do not match up in the build.prop it will fail - this applies to all devices and all ROMs.
you could also open the .zip and find the build.prop and change all of them, But its a pain in the ass !
azzledazzle said:
Use ODIN to flash a stock ICS or GB ROM and then re-root and add cwm and try again
the issue you face is because your version is the GT-N7000B and the build.prop is for the GT-N7000 so its failing because it believes the ROM is for a different device.
if the product codes do not match up in the build.prop it will fail - this applies to all devices and all ROMs.
you could also open the .zip and find the build.prop and change all of them, But its a pain in the ass !
Click to expand...
Click to collapse
I've looked everywhere and everywhere for a ICS or GB rom to flash onto the phone using Odin but all of them are for use with CWM, which doesn't work
WHAT !?!?!?!?! theres a whole thread dedicated to stock ODIN ROMs lol !!
http://forum.xda-developers.com/showthread.php?t=1424997
azzledazzle said:
WHAT !?!?!?!?! theres a whole thread dedicated to stock ODIN ROMs lol !!
http://forum.xda-developers.com/showthread.php?t=1424997
Click to expand...
Click to collapse
Because these are for the N7000 if i flash a stock ICS rom on my N7000B what will happen?
http://www.sammobile.com/firmware/?page=8
Put your details in there and it will find you a stock ROM. Ive seen threads where N7000B users have flashed N7000 ROMs without any issues.
EDIT: You CAN use any GT-N7000 firmware !
Awesome! I am downloading the Gingerbread Australian Rom as we speak for the N7000. if i flash it with odin, root it, and then install CWM would it work with installing custom roms such as paranoid android etc?
Yes because the Stock firmware will remove the 'B' and you will have no more install errors
Be sure to follow the instructions to the letter !! and make a nandroid before commencing.
azzledazzle said:
Yes because the Stock firmware will remove the 'B' and you will have no more install errors
Be sure to follow the instructions to the letter !! and make a nandroid before commencing.
Click to expand...
Click to collapse
Well, i have a nandroid backup of the current firmware, i made it just after i rooted it.
so, i will flash it with Odin on PC correct? does it require i wipe everything off the phone?
sorry for the questions i am a noob lol
you can wipe before or after it makes no difference so long as your on GB.
Dont ever wipe on ICS unless your on a safe kernel.
But do do a wipe as it will start you off on a fresh clean install
azzledazzle said:
you can wipe before or after it makes no difference so long as your on GB.
Dont ever wipe on ICS unless your on a safe kernel.
But do do a wipe as it will start you off on a fresh clean install
Click to expand...
Click to collapse
I'm successfully on a N7000 Rom, it unrooted my phone is there a way to root it again?
flash the CWM.zip in recovery and then the SU package
or flash a rooted kernel such as speedmod
azzledazzle said:
flash the CWM.zip in recovery and then the SU package
or flash a rooted kernel such as speedmod
Click to expand...
Click to collapse
I am now on Cyanogen mod 9, thanks so much for your help kind sir, Many internets to you!
read this and be more careful when flashing other phones firmware on different versionhttp://forum.xda-developers.com/showthread.php?t=1698788
I guess the 7000b is very similar no?
Sent from my GT-N7000 using Tapatalk 2
JoshDubstep said:
I am now on Cyanogen mod 9, thanks so much for your help kind sir, Many internets to you!
Click to expand...
Click to collapse
Hi, Can u please help me. I'm having the same problem as u. Got the getprop error when flashing any rom through
How were u able to flash roms through cwm & what file did u use to turn your 7000B into a 7000?

[Q] Stock rom and kernel?

I have tried to go back to a stock rom so warranty is valid, but not sure if all is okay
ANDROID VERSION 2.3.3
BASEBAND VERSION S5830XWKP7
KERNEL VERSION [email protected]#1
BUILD NUMBER GINGERBREAD.XWKPO
can somebody tell me if this is all stock? not sure about kernal, I want to take phone back to shop for repair. Any help very appreciated
If you flashed via ODIN then yes it's stock.
Boot into recovery check you have the stock recovery too.
nevis said:
If you flashed via ODIN then yes it's stock.
Boot into recovery check you have the stock recovery too.
Click to expand...
Click to collapse
Thanks,
Hi!. I recently flashed my froyo Ace to LeWa ROM but since I need to revert back and install the stock ROM in GB.Can anyone redirect me to the appropriate post please. Didn't do backup for original rom as I thought froyo is much outdated for a armv9. Thanks in advance.
tennoemi said:
Hi!. I recently flashed my froyo Ace to LeWa ROM but since I need to revert back and install the stock ROM in GB.Can anyone redirect me to the appropriate post please. Didn't do backup for original rom as I thought froyo is much outdated for a armv9. Thanks in advance.
Click to expand...
Click to collapse
Flash stock firmware through odin. READ, seriously, READ the stickies. It's all there.

Categories

Resources