Hi, My Usb-Port is broken. I´m using Ginger Real 2.0. Is it possible to flash a Stock Rom via CWM?
...question...if your usb port is broken how do you recharge your device?
Sent with my Evil GT-S5570 from Hell
Charging is working. Only the connection to the PC doesn´t work. Drivers and the Cable are ok. With a other Galaxy Ace i can connect.
Zaunpfahl said:
Charging is working. Only the connection to the PC doesn´t work. Drivers and the Cable are ok. With a other Galaxy Ace i can connect.
Click to expand...
Click to collapse
Ok.
Sent with my Evil GT-S5570 from Hell
You can try the mobile odin from market by chainfire... May work may not work
Sent from my GT-S5830 using xda premium
jumbobombo said:
You can try the mobile odin from market by chainfire... May work may not work
Sent from my GT-S5830 using xda premium
Click to expand...
Click to collapse
Don't use mobile ODIN! You'll brick your phone.
Sent from my GT-S5830 using Tapatalk 2
NathanBookham said:
Don't use mobile ODIN! You'll brick your phone.
Sent from my GT-S5830 using Tapatalk 2
Click to expand...
Click to collapse
If he bricks his phone it could be repaired for free
Sent from my GT-S5830 using Tapatalk 2
Probable Solution
My phone's USB was also not working but I made it working. What you can do is first check whether your phone USB port is having any salt deposits (yes, salt deposits because of drying of un-noticed spilled water) if it is there clean it with any good quality cleaning fluid. Second you can try to push up the USB connector (chip on which USB connecting gold colored plates are sticked) to the screen side of the phone BUT NOT TOO MUCH. Try these when phone is off and battery is taken out. Do it carefully or you will end up in breaking your USB connector. These methods have worked for me, but try it on your own risk. I don't take any responsibility. Best luck.
Related
My phone charges fine, and my usb jig works fine. When I connect it to the pc. It charges fine. But to connect it to the pc, so I can mount the sd card or so I can connect to Odin, the micro usb doesn't connect right away for data transfer.
I need to insert the micro usb a little tiny bit, wait a second, then push it the rest of they way in, so the usb debugging notification pops up. And most of the time, I have to repeat the process of inserting and removing the micro usb several times, until the usb debugging and usb storage shows up in my notification Window.
I want to ask if anyone else has this problem. If so, is it the usb port going bad in my phone? It was like this ever since I bought the phone from ATT. Brand new out of the box, with contract.
EDIT: switched Samsung usb cables, and connected right away, no problems. No playing with the cable to try to get it to connect.
Sent from my Serendipity VII flashed Captivate using xda premium
That sounds like a hardware defect. Also, try using a different USB cable. How long have you had it?
Sent from my SGH-I897 using xda premium
kevnuke said:
That sounds like a hardware defect. Also, try using a different USB cable. How long have you had it?
Sent from my SGH-I897 using xda premium
Click to expand...
Click to collapse
I have had the phone about 1 month.
Sent from my Serendipity VII flashed Captivate using xda premium
Limitz Cash said:
I have had the phone about 1 month.
Sent from my Serendipity VII flashed Captivate using xda premium
Click to expand...
Click to collapse
Are you on a ics rom?
Sent from my SGH-I897 using xda premium
leezrd said:
Are you on a ics rom?
Sent from my SGH-I897 using xda premium
Click to expand...
Click to collapse
Nope. Gb I believe. Serendipity 7
Sent from my Serendipity VII flashed Captivate using xda premium
It may not b the usb port on the phone... I have 2 micro usb to usb cables, one that originally came with my captivate and it has always been loose. The other that I have came with my sgs 2 and it fits real snug in the captivate. ---- So maybe just try a different cable. Worth a try.
Sent by XDA Premium App
4-2ndtwin said:
It may not b the usb port on the phone... I have 2 micro usb to usb cables, one that originally came with my captivate and it has always been loose. The other that I have came with my sgs 2 and it fits real snug in the captivate. ---- So maybe just try a different cable. Worth a try.
Sent by XDA Premium App
Click to expand...
Click to collapse
Hmm, that is true. The cable I use to flash my phone is a Samsung cable that came with my phone, and it fits a little loose. However, the cable I use to charge my phone fits snug. I haven't tried to connect it to my pc though. I was doing what I read on here, about using Samsung usb cables. So I will try it out, and see if it's the problem. Thanks.
EDIT: That was the problem. The cable is a Samsung, but it's not the cable that came with my phone. But it connects right away, no problems at all. I don't know why I didn't think about that in the first place. Lol. It's always the littlest things that you forget to try. Thank you!
Sent from my Serendipity VII flashed Captivate using xda premium
Hi guys,
Originally the issue was with the USB / charging port , the phone wasn't charging properly it used to charge for a bit then stop. The battery was checked but it was fine.
Got the phone fixed the guy fixed the port and he also flashed new firmware, it originally had stock gingerbread and he replaced it with stock JVP 2.3.4.
Since then the phone charges fine but it doesn't connect to the laptop. Windows doesn't even make that sound to show it has been recognised. I have factory reset it, also cleared USB storage formatted the sd as well. I also reinstalled the USB drivers but still no luck.
I would appreciate help very much.
Cheers
Sent from my GT-I9100 using Tapatalk 2
I even tried to root using gingerbreak so I could flash using mobileodin but even that didn't work.
Sent from my GT-I9100 using Tapatalk 2
Forgot to mention that the cable is fine it works fine with the S2
Sent from my GT-I9100 using Tapatalk 2
Where did you fix the port?
At a local phone shop.
Sent from my GT-I9100 using Tapatalk 2
originalbeenie said:
At a local phone shop.
Sent from my GT-I9100 using Tapatalk 2
Click to expand...
Click to collapse
Did he warned you about losing the ability to transfer files? Anyway, try cleaning the port.
change the usb port that work's i have the same problem and that work sorry for bad english
He didn't
Sent from my GT-I9100 using Tapatalk 2
So I shoud try to use a different usb port on the laptop?
Sent from my GT-I9100 using Tapatalk 2
Tried other USB ports still no difference.
Sent from my GT-I9100 using Tapatalk 2
Dear my friend... my question is ..
my mobile phone is always charging while not connected to the charger. and the screen is always on. when I was off the screen, the screen will open by itself ... and also when the mobile phone is switched off ... charging indicator charging show up although no plug inserted. sorry my bad english ...
You are not providing any useful information.. Wich rom are you on? Wich kernel?
Tapatalking on my n7000
May be a contaminated usb port. Check for dust particles and clean it gently. If that does not work may be port is fault. Get it checked if you have warranty
Ok i will be check the usb inlet port... thanks alots guy... will be inform
Sent from my GT-N7000 using xda premium
msedek said:
You are not providing any useful information.. Wich rom are you on? Wich kernel?
Tapatalking on my n7000
Click to expand...
Click to collapse
Sorry... I install many jb custom roms... all same result.. trying cleaning usb port first...
Sent from my GT-N7000 using xda premium
eiril_77 said:
Sorry... I install many jb custom roms... all same result.. trying cleaning usb port first...
Sent from my GT-N7000 using xda premium
Click to expand...
Click to collapse
Check if the screen can be off when your phone is connected to the usb cable. If this is the case then just get a tight usb connector and connect to your phone and disconnect it a couple of times to clean out the port.
tknguyencsu said:
Check if the screen can be off when your phone is connected to the usb cable. If this is the case then just get a tight usb connector and connect to your phone and disconnect it a couple of times to clean out the port.
Click to expand...
Click to collapse
Yes... screen can be off only if usb cable is conneted... if not.. the screen will open back after few sec screen turn off... and battery ikon is in charger mod... my batt drain so fast...
Sent from my GT-N7000 using xda premium
My note is back in normal condition.. i download from youtube how to take out that usb port.. i takeout the usb port.. and clean.. found sum of look like salt at that port terminal on board... thanks to all
Sent from my GT-N7000 using xda premium
Good to know is solved
Hello, as the topic says I have usb connection problem on stock v30c rom. Whenever i connect my phone to Pc my phone gives me notification of slow charging no matter in which mode I connect. I tried enabling/disabling usb debugging. Tried different cable none works. Please help
gaurishmhatre said:
Hello, as the topic says I have usb connection problem on stock v30c rom. Whenever i connect my phone to Pc my phone gives me notification of slow charging no matter in which mode I connect. I tried enabling/disabling usb debugging. Tried different cable none works. Please help
Click to expand...
Click to collapse
Factory reset from hidden menu and all should be fine
Sent from my battery eating android monster!
Tried it many times by hard reseting . I think there might be usb problem. But i can charge my phone absolutely fine.
N00BY0815 said:
Factory reset from hidden menu and all should be fine
Sent from my battery eating android monster!
Click to expand...
Click to collapse
Tried it many times by hard reseting . I think there might be usb problem. But i can charge my phone absolutely fine.
Methods i tried.
1.Factory reset
2.Turning on/off usb debugging mode
3.Cleaning dust from usb port
4.Options from lg hidden menu
5.changing connection type from usb mass storage to lg suote and others
Any other methods to try?
Sent from my LG-P970 using xda app-developers app
gaurishmhatre said:
Tried it many times by hard reseting . I think there might be usb problem. But i can charge my phone absolutely fine.
Methods i tried.
1.Factory reset
2.Turning on/off usb debugging mode
3.Cleaning dust from usb port
4.Options from lg hidden menu
5.changing connection type from usb mass storage to lg suote and others
Any other methods to try?
Sent from my LG-P970 using xda app-developers app
Click to expand...
Click to collapse
Put paper under the back cover. Besidr the camera. Got this issue AGAIN, after sending it off to repair. Charges fine with usb, but cant transfer sht without paper.
Sent from my LG-P970 using xda app-developers app
Will surely try your method. If it works atleast i will be able to flash new rom. Thanks
Sent from my LG-P970 using xda app-developers app
gaurishmhatre said:
Will surely try your method. If it works atleast i will be able to flash new rom. Thanks
Sent from my LG-P970 using xda app-developers app
Click to expand...
Click to collapse
Jesus. Now mine is charging only even with paper! Its probably bc of using it while charging and the heat unsoldered stuff inside.
Sent from my LG-P970 using xda app-developers app
ouroboros12 said:
Jesus. Now mine is charging only even with paper! Its probably bc of using it while charging and the heat unsoldered stuff inside.
Sent from my LG-P970 using xda app-developers app
Click to expand...
Click to collapse
Omg mine charging is working fine but no usb even after having paper. If somethings unsoldered it will cost me as i am out of warranty. Thank god i had flashed stock rom and this peoblem occured. Now i have to repair it at lg service centre i guess.
gaurishmhatre said:
Omg mine charging is working fine but no usb even after having paper. If somethings unsoldered it will cost me as i am out of warranty. Thank god i had flashed stock rom and this peoblem occured. Now i have to repair it at lg service centre i guess.
Click to expand...
Click to collapse
Thats whatim going through AGAIN too. Ill have to sendto repair. I cant smartflash.
Sent from my LG-P970 using xda app-developers app
ouroboros12 said:
Put paper under the back cover. Besidr the camera. Got this issue AGAIN, after sending it off to repair. Charges fine with usb, but cant transfer sht without paper.
Sent from my LG-P970 using xda app-developers app
Click to expand...
Click to collapse
Hey could you add a photo because i am not getting where should i exactly place the paper. With or without back cover?
Sent from my LG-P970 using xda app-developers app
gaurishmhatre said:
Hey could you add a photo because i am not getting where should i exactly place the paper. With or without back cover?
Sent from my LG-P970 using xda app-developers app
Click to expand...
Click to collapse
Place it under the back cover. Beside the camera and under usb port. Make sure it puts pressure, but dont put too thick paper. Try unscrewing and check the disassembling thread.
Sent from my LG-P970 using xda app-developers app
ouroboros12 said:
Place it under the back cover. Beside the camera and under usb port. Make sure it puts pressure, but dont put too thick paper. Try unscrewing and check the disassembling thread.
Sent from my LG-P970 using xda app-developers app
Click to expand...
Click to collapse
Thanks
Sent from my LG-P970 using xda app-developers app
Hi
Flashing other baseband...
ZTNL said:
Flashing other baseband...
Click to expand...
Click to collapse
How can we flash baseband when we cannot connect to pc itself!!
Sent from my LG-P970 using xda app-developers app
please reply
still no reply? i had gone to service center there i asked them to change usb port which they did but still cannot connect to pc
Hi everybody,
The Micro USB of my Galaxy Note is broken, I can therefore no more use it to charge the battery and no more connect it to the computer. Thankfully I can charge the battery using an external charger. The problem is that I have no operating system loaded in the device and I can no more boot to the custom recovery (CWM). The device is rooted, I can only start the bootloader of the device.
So, my question is: Is there a way to flash a custom recovery or anyway to flash a ROM from bootloader without connecting to the PC? Is there a way to use SDCARD to repair the device? Anyway to resolve the problem?
Thanks in advance for any help you can give me.
Sent from my Galaxy Nexus using xda app-developers app
ASHURiCAN said:
Hi everybody,
The Micro USB of my Galaxy Note is broken, I can therefore no more use it to charge the battery and no more connect it to the computer. Thankfully I can charge the battery using an external charger. The problem is that I have no operating system loaded in the device and I can no more boot to the custom recovery (CWM). The device is rooted, I can only start the bootloader of the device.
So, my question is: Is there a way to flash a custom recovery or anyway to flash a ROM from bootloader without connecting to the PC? Is there a way to use SDCARD to repair the device? Anyway to resolve the problem?
Thanks in advance for any help you can give me.
Sent from my Galaxy Nexus using xda app-developers app
Click to expand...
Click to collapse
Your only choice is to replace the usb port. Without recovery you can't install custom roms from the micro sd and without pc connection, you can't install stock roms or connect via adb.
Sent from my GT-N7000 using XDA Premium 4 mobile app
SpyderTracks said:
Your only choice is to replace the usb port. Without recovery you can't install custom roms from the micro sd and without pc connection, you can't install stock roms or connect via adb.
Sent from my GT-N7000 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
Thank you for your answer. Do you think I can link the 4 cables that are inside the USB cable to the Micro USB port pins of the device ? I mean to do it temporarily to connect the device to the PC. May it work that way?
Sent from my GT-P3110 using xda app-developers app
ASHURiCAN said:
Thank you for your answer. Do you think I can link the 4 cables that are inside the USB cable to the Micro USB port pins of the device ? I mean to do it temporarily to connect the device to the PC. May it work that way?
Sent from my GT-P3110 using xda app-developers app
Click to expand...
Click to collapse
I guess theoretically it's possible, but I'd get advice from someone who's done a change of use port.
Sent from my GT-N7000 using XDA Premium 4 mobile app
SpyderTracks said:
I guess theoretically it's possible, but I'd get advice from someone who's done a change of use port.
Sent from my GT-N7000 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
Thx, I will try
Sent from my Galaxy Nexus using xda app-developers app
This the is usb port. It has few thin pins coming out of the port. If you are a good solderer then you may try but not sure which pins are what.
Sent from my GT-I9500 using xda premium
Here is a cut and paste of my post from another thread. it will be useful to you.
take a look at your original usb port and put it next to the imitation cheap board from ebay. you will see that it looks exactly the same at first glance but at close inspection you will notice different labeling. I have bought 6 boards from ebay from different sources and all were bad. some with no sound, one wont charge, one will turn off the phone when I connect the charger.
Now I have established what a real usb port looks like with the conductive tape covering the back antenna. I have ordered 2 parts from 2 sources who have confirmed all the original marking and labels on their parts. they claim its original and OEM. so give me time so I can receive the item, install and test it. then I will give my review.
meanwhile you can look at these 2 different sellers. I think they have original parts.
http://www.ebay.com/itm/271148163771...84.m1497.l2649
http://www.ebay.com/itm/261224231849...84.m1497.l2649
parts4repair.com has working ones for sure. Lot of ebay sold are found faulty, if you search the threads.
Also make sure you get the proper revision
yeah... make sure no get a low quality Charger port flex cable. THe low quality one really troublesome i just waste and replacet 2 useless port in half year due to purchase low quality one....
NOw hoping the third one dont fail me in short time.