Hi, I'm tryin to instal nAa GB kernel, but flashtool doesn't recognize my phone... If I plug the USB it says "device connected with USB debugging off", but it doesn't say the model and in fact when I try to flash it doesn't work. I've installed gordon gates and all the drivers, but it still doesn't work. Any ideas?
what exactly did you do? write all the steps
Ok I think it works now, I needed to switch to MSC mode Thanks anyway
well, the phone needs to be turned off
+ drivers installed,lpl
Sent from my E15i using xda premium
+ holding back button while connecting USB
Is it important how did i send this?
Tommolo said:
Hi, I'm tryin to instal nAa GB kernel, but flashtool doesn't recognize my phone... If I plug the USB it says "device connected with USB debugging off", but it doesn't say the model and in fact when I try to flash it doesn't work. I've installed gordon gates and all the drivers, but it still doesn't work. Any ideas?
Click to expand...
Click to collapse
intall latest drivers and hold back button then connect to the computer....................
if still don't recognize, go to device manager and check there,
I think you don't:laugh: turn on debugging
yeah!
you forget to turn on your debugging!
mark :
allow non market apps
android debugging
install all drivers
x8driver
flashtool\driver
gordons gates
Help.
here is my problem i got the flashtool because i want to downgrade my xperia pro and it connects it detects my device but once i put it into the fastboot to flash it back to its original state it just shows the little pop up that says to connect it to fastboot mode and i do it on the phone the little blue light turns on and stuff but it doesn't recognize it on the flashtool the usb debugging is on and the unknown sources is on as well i want to downgrade the phone because since i upgraded it doesn't let me watch movies on my phone from the internet and i want to root it to if anyone can help it will be much appreciated. thanks :crying:
run ggsetup.exe in flashtool/drivers
then do flashing:laugh:
Awesome!
nag xperia said:
run ggsetup.exe in flashtool/drivers
then do flashing:laugh:
Click to expand...
Click to collapse
Doing this now. Makes Sense! Thank you
phnxme7 said:
Doing this now. Makes Sense! Thank you
Click to expand...
Click to collapse
hi can you please help me flashtool the latest version now can not flash the firmware 2.1.ftf why
ariadelvana said:
hi can you please help me flashtool the latest version now can not flash the firmware 2.1.ftf why
Click to expand...
Click to collapse
make sure if your flash tool not corrupt, disable firewall or antivirus..
install all driver and check your phone
Milandas01 said:
Hello friend, please pay your attention. I'm try to root my canvas hd using sp flash tool. Everything is alright but when I connect my device it's only shows searching. Not detect i also install or uninstall x86 driver hundred times. But problem is same. what is the problem i can't understand :'(
Please please please help
Thank in advance :'(
Click to expand...
Click to collapse
Wrong forum
pooped from my rooted a$$
Related
in s1 tool i pressed identify and then i plugged my usb cable but it is not detecting my phone
ashthegamer said:
in s1 tool i pressed identify and then i plugged my usb cable but it is not detecting my phone
Click to expand...
Click to collapse
did you enter in flashmode by holding back button while connecting
ashthegamer said:
in s1 tool i pressed identify and then i plugged my usb cable but it is not detecting my phone
Click to expand...
Click to collapse
Connect it in flash mode
sent from my W8 using client-server technology
drivers installed?
antivirus disabled
Nothinng mentioned
sent from my W8 using client-server technology
pcc installed?
signature under repair
stamatis said:
drivers installed?
Click to expand...
Click to collapse
yes i have installed drivers and disabled antivirus too ,i was holding back button it is showing green light
ashthegamer said:
yes i have installed drivers and disabled antivirus too ,i was holding back button it is showing green light
Click to expand...
Click to collapse
gordons gate installed???
fotak-x said:
gordons gate installed???
Click to expand...
Click to collapse
i have installed but i m not sure it was the right one. wen i m using flashtool it is showing an error
"ERROR - Drivers need to be installed for connected device.
ERROR - You can find them in the drivers folder of Flashtool."
i have installed that drivers serveral times but it is not showing.....
ashthegamer said:
i have installed but i m not sure it was the right one.. can u pls give me the link of it...
Click to expand...
Click to collapse
It may be in your flashtools folder
Go to flashtools installation folder/drivers now u should see it... & its the right one
- maybe you should plug while your device is turned on?+usb debugging enabled (don't laugh! I just can't remember it)
sent using" ultimate - ics - standard"
Do you have PC Companion? It should have necessary drivers for the phone and also install gordon's gate from the setup file in the drivers folder.If its not working then search the web for it you will get the latest drivers for download.
jay-z-s said:
It may be in your flashtools folder
Go to flashtools installation folder/drivers now u should see it... & its the right one
- maybe you should plug while your device is turned on?+usb debugging enabled (don't laugh! I just can't remember it)
sent using" ultimate - ics - standard"
Click to expand...
Click to collapse
i am getting this error
ashthegamer said:
i am getting this error
Click to expand...
Click to collapse
Sorry, I didn't unlocked with cmd & never used it.
I had problem with recognizing my device too ,Gordons gate solved my issue
I simply used flash tools & unlocked by clicking some buttons (& s1tools for making sure its unlockable)
sent using" ultimate - ics - standard"
Try different method then. Use flash tool
Sent from my X8 using xda app-developers app
GuyZ M NEW TO THIS FORM ND NEED UR HELP,ALL OF A SUDDEN MY MOBILE STOPED AND WHEN I REBOTED IT AND CONNECTED TO MY PC IT QAS NOT SHOWING.NO MTP NO FTP WHATEVER IT IS SAID.... NEITHER ON KIES.TRIED ON DIFFERENT SYSTEM ,REBOOTED TWICE BUT STILL NOTHING.
PLEASE HELP ME .
Is it charging via usb?
nokiamodeln91 said:
Is it charging via usb?
Click to expand...
Click to collapse
+1 and check with any other usb port..!
Sent from my GT-N7000 using Tapatalk 2
nokiamodeln91 said:
Is it charging via usb?
Click to expand...
Click to collapse
yes my friend it is.
are you rooted? if yes then you could try installing the rom again using mobile odin.. and see if that helps
Try this,
Boot into recovery, connect the phone & let it install the required drivers.
Boot into Download mode & again let windows install required drivers.
Boot normally & again let it install whatever things that are required to run things
& you are thru. Hope this helps.
ksrulz said:
GuyZ M NEW TO THIS FORM ND NEED UR HELP,ALL OF A SUDDEN MY MOBILE STOPED AND WHEN I REBOTED IT AND CONNECTED TO MY PC IT QAS NOT SHOWING.NO MTP NO FTP WHATEVER IT IS SAID.... NEITHER ON KIES.TRIED ON DIFFERENT SYSTEM ,REBOOTED TWICE BUT STILL NOTHING.
PLEASE HELP ME .
Click to expand...
Click to collapse
Hello, bit of a newbie myself but I may be of help. A couple of questions- has it worked before, and if so, when? Secondly, prior to it stopping working (that is, if it did), did you install any new software on your phone or computer that may have affected the setup?
its not rooted.nd still m nt able to connect to any pc.
ksrulz said:
its not rooted.nd still m nt able to connect to any pc.
Click to expand...
Click to collapse
Sounds like a USB driver issue. Do you have kies installed, or the stock usb drivers installed? Mine can be a bit flakey when connecting with USB though.
Actually sounds like something that happened to me. After upgrading kies my usb drivers got updated to but my pc showed missing id whenever my note got connected. Only solution i found is to reinstall the usb drivers, disconect the pc from internet and then connect the note. After drivers are installed i can connect to the internet again. Shoud i connect the note while connected to internet gives me the missing hardware id again and makes me install drivers again. Hope this helps you.
Guyz thank you Very Much ... But A Small dust Particle Over The USB Wire Was creating the Problem. M Sorry and Thank You Guyz <3
********************************
Forum Closed \m/ Respect XDA Developers
Tried the sony method... Device not found...
Tried the flashtool method... Device not found...
I don´t know if I´m getting the fastboot drivers right or not, the does turn blue when I connect it to the PC in fastboot mode...
USB debugging is checked...
Does the phone need to be in sotck FW 350?
Help?
emoratori said:
Tried the sony method... Device not found...
Tried the flashtool method... Device not found...
I don´t know if I´m getting the fastboot drivers right or not, the does turn blue when I connect it to the PC in fastboot mode...
USB debugging is checked...
Does the phone need to be in sotck FW 350?
Help?
Click to expand...
Click to collapse
First of all, Bootloader Unlock Allowed: Yes?
diego9016 said:
First of all, Bootloader Unlock Allowed: Yes?
Click to expand...
Click to collapse
Yep...
emoratori said:
Yep...
Click to expand...
Click to collapse
Did you install the fastboot drivers?
diego9016 said:
Did you install the fastboot drivers?
Click to expand...
Click to collapse
I did, but I don´t know if they´re working.
Didn´t notice anything different in the device manager.
The first time I connected my device windows couldn´t install them, but it did not ask for them again.
How are them suposed to be installed?
emoratori said:
I did, but I don´t know if they´re working.
Didn´t notice anything different in the device manager.
The first time I connected my device windows couldn´t install them, but it did not ask for them again.
Click to expand...
Click to collapse
That's the problem. Windows can't install them just when you connect the phone, you need to install them manually.
When you downloaded the Unlock Bootloader tool, there was a folder or a zip with the drivers. If it is a zip, extract it.
Connect the phone leaving up arrow pressed, the led will turn blue.
Go to device manager on the pc, look for Fastboot or something like that.
Select browse my computer for driver software and select the divers folder. It should install them right away.
Now you have the fastboot drivers installed and you can continue with the procedure.
Edit: You already have the KEY from Sony?
diego9016 said:
That's the problem. Windows can't install them just when you connect the phone, you need to install them manually.
When you downloaded the Unlock Bootloader tool, there was a folder or a zip with the drivers. If it is a zip, extract it.
Connect the phone leaving up arrow pressed, the led will turn blue.
Go to device manager on the pc, look for Fastboot or something like that.
Select browse my computer for driver software and select the divers folder. It should install them right away.
Now you have the fastboot drivers installed and you can continue with the procedure.
Edit: You already have the KEY from Sony?
Click to expand...
Click to collapse
When I go to DEVICE MANAGER I can´t find fastboot or anything like it... There are a couple of unknown devices...
I should power down the phone and connect it with vol up right?
emoratori said:
When I go to DEVICE MANAGER I can´t find fastboot or anything like it... There are a couple of unknown devices...
Click to expand...
Click to collapse
Win7?
Can you attach some screenshots of the device manager page?
Yes. You need to power off and connect the device holding up until led turns blue.
diego9016 said:
Win7?
Can you attach some screenshots of the device manager page?
Yes. You need to power off and connect the device holding up until led turns blue.
Click to expand...
Click to collapse
Yeah, win7... 64x...
I´m at work right now... When I get home I´ll post...
PLEASE don´t leave me!!! hehehe...
emoratori said:
Yeah, win7... 64x...
I´m at work right now... When I get home I´ll post...
PLEASE don´t leave me!!! hehehe...
Click to expand...
Click to collapse
Don't worry, if I can help, I'll do it.
EDIT: When you get home, check this out. It was for 2011/12 devices, but most of the procedure works for the Z.
Fastboot drivers are unsurported on x64 you have disable driver verification
diego9016 said:
Don't worry, if I can help, I'll do it.
EDIT: When you get home, check this out. It was for 2011/12 devices, but most of the procedure works for the Z.
Click to expand...
Click to collapse
One question...
If I install the fastboot drivers through the flash tool should it work?
Maddhouse said:
Fastboot drivers are unsurported on x64 you have disable driver verification
Click to expand...
Click to collapse
How?
Thanks!
think this is it
1. download flashtool and install
2. type "bcdedit /set testsigning on" in cmd and restart PC
3. install driver in the flashtool "drivers" folder, check fastboot, agree when prompts
4. type "bcdedit /set testsigning off" in cmd and restart PC
http://msdn.microsoft.com/en-us/library/windows/hardware/ff553484(v=vs.85).aspx
EDIT:
Also this might be handy if you are planning alot of adb usage
Got it!
Usb debugging was MST and not MCS... duh...
Unocked...
Recovery...
Rooted...
THANKS!
Hello,
I have some problems trying to flash my XZ. I'm using Xperia Flashing Tool 0.9.10.2 beta6 on Windows 8 x64 and whenever I try to flash my XZ flashing tool "gets stuck at "Device connected in flash mode" message after which it gets reconnected and if I try again same thing will happen.
So my question is, am I doing something wrong and if so, please advise.
Bluffer said:
Hello,
I have some problems trying to flash my XZ. I'm using Xperia Flashing Tool 0.9.10.2 beta6 on Windows 8 x64 and whenever I try to flash my XZ flashing tool "gets stuck at "Device connected in flash mode" message after which it gets reconnected and if I try again same thing will happen.
So my question is, am I doing something wrong and if so, please advise.
Click to expand...
Click to collapse
have you correctly installed the drivers for it, connect phone in flashmode and does windows drivers load, also in flashtool go to devices>conected devices and what does it say
Maddhouse said:
have you correctly installed the drivers for it, connect phone in flashmode and does windows drivers load, also in flashtool go to devices>conected devices and what does it say
Click to expand...
Click to collapse
I think drivers are installed fine. Screenshot is below.
no doesnt look it, under ADB devices there is no device, Reinstall drivers and try again. Try the way in my sig for win 8
Unfortunately same thing happens - check screenshot below.
Bluffer said:
Unfortunately same thing happens - check screenshot below.
Click to expand...
Click to collapse
thats better you now have a ADB device installed, you should now be able to put your phone into flashmode
power off your phone with usb diconnected, hold vol down and reconnect turned off phone to usb and you should now get green led and flashtool will say device connected in flashmode but you only have about a min in flashmode before phone reboots
Thank you for your help and effort but even now it keeps disconnecting device. I don't know where the problem is, maybe I'm not doing something as I should.
This is the procedure I was trying:
1) I select Flash device in flash tool
2) I select Flashmode mode
3) I choose which firmware to flash and click Flash so flash tool can start it's magic
4) When flash tool shows message that I can remove my device from USB and turn it off I do so
5) I also press volume down and reconnect the device with the PC.
6) Problem happens here
what about if flashtool isnt ready to flash file, does flashtool pick it up (4 and 5)
it will say device connected in flashmode with green led
Yeah, it does pick it up and displays a message "Device connected in flash mode" and after awhile "Device disconnected".
Bluffer said:
Yeah, it does pick it up and displays a message "Device connected in flash mode" and after awhile "Device disconnected".
Click to expand...
Click to collapse
good yer i think its about a min, now try and download another FTF file
part 1
part 2
that works i have got loads of people to flash that
edit: i made it so its self extract version then there is a FTF file for flashtool
As you suggested the problem was in faulty FTF. It's working like a charm now!
Thank you once again!
Bluffer said:
As you suggested the problem was in faulty FTF. It's working like a charm now!
Thank you once again!
Click to expand...
Click to collapse
Good Good, What wasnt helping was you didnt have drivers installed aswell, now you just have to root and your sorted :highfive:
hey i m having same with my x8 after i accidently kept stock rom for nalf kernal... nw i m nt able to open cmw in phone...plz help..
Hi all,
Not really sure where to post this, so firgured id put it under general questions. I am currently trying to flash android 4.2 to an Xperia Z1 thats currently running 4.4.4 kitkat. - Now feel i should mention at the start, that i am not particually brilliant with android, and am slowly learning the basics.
I am using a program called Flashtool, I have the file that I want to flash over (the 4.2) - I have also gone through the program to install all the drivers. ( I have installed all drivers as i didnt know what i needed and didnt need, and initially tried just installing the z1 drivers ) Flashtool picks up my phone, and tells me what its currently running, it also detects that what version of android i am currently running, but for some reason dosent pick up that ive tried to plug in my phone in flash mode.
The system detects when I start the phone in fastboot mode, but whenever I use Flashtools to try and connect my phone in flash mode, it just keeps asking me to connect the phone. ( I am using Z1 and the standard key is vol down whilst plugging it into the usb cable, however the l.e.d. flashes red and green quickly and then shuts off, cant even be sure that the problem is Flashtools, it might be that i havent put it into flashmode properly??)
any help would be brillant, feel free to contact me via the xda site, or via e-mail [email protected] -
This might be a particularly basic problem to somebody, its had me stumped for days, any help you could give would be massively appreciated,
cheers
Try Older version of flashtool or you are missing some drivers in flashtool folder is file with drivers and you need to check flashtool drivers and z1 drivers and firstly connect the phone and wait to install drivers and next turn off phone and hold vol down and connect without flashtool to install flashtmode drivers and at the end try to flash via flashtool.
If you are sure you have installed drivers correctly then kill any other process on your pc which use adb drivers like pc companion or airdroid etc. Or use other usb port. Or use other pc. Wrong thread though.
mosespl said:
Try Older version of flashtool or you are missing some drivers in flashtool folder is file with drivers and you need to check flashtool drivers and z1 drivers and firstly connect the phone and wait to install drivers and next turn off phone and hold vol down and connect without flashtool to install flashtmode drivers and at the end try to flash via flashtool.
Click to expand...
Click to collapse
Thanks, will try the older version of flashtool to see if that makes a difference, still not sure ive got the Z1 in flashmode though, isnt a light suppose to stay on, rather than blink once? Anyway thanks for the help, will update
dan34321 said:
Thanks, will try the older version of flashtool to see if that makes a difference, still not sure ive got the Z1 in flashmode though, isnt a light suppose to stay on, rather than blink once? Anyway thanks for the help, will update
Click to expand...
Click to collapse
Update: phone now knows its in flash mode, however flashtool gets stuck on 'proccessing loader'?
you have been brilliant so far? Any guesses?
cheers
Dan
dan34321 said:
Update: phone now knows its in flash mode, however flashtool gets stuck on 'proccessing loader'?
you have been brilliant so far? Any guesses?
cheers
Dan
Click to expand...
Click to collapse
Re-download Rom i have same situation and I downloaded room again and it works
SORTED - Thanks all, managed to root, but have a fresh problem
mosespl said:
Re-download Rom i have same situation and I downloaded room again and it works
Click to expand...
Click to collapse
Thanks all, have now successfully rooted the phone, unfortunately for me that has yielded more questions than answers loll,
Now that its rooted, its running 4.2.2 and I am wondering if there is a way of keeping root access, but flashing it back up to 4.4.?
Really grateful to everyone!!
dan34321 said:
Now that its rooted, its running 4.2.2 and I am wondering if there is a way of keeping root access, but flashing it back up to 4.4.?
Click to expand...
Click to collapse
Just Flash already rooted 4.4 rom on it, should work !
If you are afraid of losing apps backup them with Titanium !