Can you help me guys? My galaxy ace could not connect to pc. It is running on stock rom, android gingerbread version 2.3.3
USB debugging is turned off.
It charges when i connect it to my PC and it also shows "USB connected". but when i click "connect storage to PC" and click ok, it doesn't connect and shows SD card safe to remove, turn off usb storage.
Please help me guys. Thanks!!!
Did you install Kies on PC? or the drivers only?
You have change the cable, thread and did you download some pilot (like kies)?
Related
the only way to connect my GalaxyS to PC is running the KIES. If I don't run KIES it's not appeared in My Computer (although is charged).
I tried to use android screencast but it seems that the device in not recognized!
Any assistance pls?
also have this issue, although under some other usb connection modes my pc does recognise 2 external devices but can not connect to them what so ever
windows 7 64bit, samsung drivers installed
You can still use it as a usb mass storage. Only thing it wont do is updates. KIES is a known problem with many people. Some suggestion says to use the back USB ports. Some says to download the newest drivers.
hey guys i just flashed kingdriod v3 on my new galaxy note, everything is working fine but when i connect the usb cable to computer does not recognized phone. it charges from the usb but i cant see the phone in my computer and when i connect it to kies it just gets stuck on the connecting to device screen. when i turn on usb storage the phone and sd card shows up in my omputer but when i turn it off nothing shows up.
any ideas whats going on?
cheers
try usb switcher from playstore.
ozmikeli said:
hey guys i just flashed kingdriod v3 on my new galaxy note, everything is working fine but when i connect the usb cable to computer does not recognized phone. it charges from the usb but i cant see the phone in my computer and when i connect it to kies it just gets stuck on the connecting to device screen. when i turn on usb storage the phone and sd card shows up in my omputer but when i turn it off nothing shows up.
any ideas whats going on?
cheers
Click to expand...
Click to collapse
yellowpad said:
try usb switcher from playstore.
Click to expand...
Click to collapse
dosnt work on note 4.0.3
any ideas guys?, still not working.
i am using kingdroid 3.0 now....and i am using usb switcher. it works for me.
ozmikeli said:
dosnt work on note 4.0.3
Click to expand...
Click to collapse
I have owned a galaxy note for about 4 months now. But i have not been able to root or install custom ROMS because I can not get any PC to recognize my NOTE (therefore I cant use ODIN).:crying:
When i connect my note to any PC via a USB cable I get the message "USB connected - MTP connected" on my note but my computer does not recognize the note. I have installed the latest samsung note PC drivers , the latest KIES software.....it has been so tiring.:crying:
If there is any one that can help with a way i can root and install custom ROMS on the note via putting the files on the memory card (because I can sent files to the note from my PC via Bluetooth) i will be very happy. Also, if there is something i can do to make my PC recognize my note i would really love to hear it:cyclops:.
tbagtbee said:
I have owned a galaxy note for about 4 months now. But i have not been able to root or install custom ROMS because I can not get any PC to recognize my NOTE (therefore I cant use ODIN).:crying:
When i connect my note to any PC via a USB cable I get the message "USB connected - MTP connected" on my note but my computer does not recognize the note. I have installed the latest samsung note PC drivers , the latest KIES software.....it has been so tiring.:crying:
If there is any one that can help with a way i can root and install custom ROMS on the note via putting the files on the memory card (because I can sent files to the note from my PC via Bluetooth) i will be very happy. Also, if there is something i can do to make my PC recognize my note i would really love to hear it:cyclops:.
Click to expand...
Click to collapse
Did you check the usb debugging when you connect it to your computer?
Did you try to change your usb wire?
put the phone in DOWNLOAD MODE. read dr. ketan's thread.
You have to reboot your phone in Download Mode by Pressing Vol Down+Home Key+Power Button simultaneously.
A warning message will be displayed. Just Press Vol Up Button to Continue. Now connect it to pc and open ODIN. You will see a small box in upper left corner turns into yellow. It means yours phone is recognised by ODIN. Now start Flashing
Hope it Helps.
jonpaslim said:
Did you check the usb debugging when you connect it to your computer?
Did you try to change your usb wire?
Click to expand...
Click to collapse
Yes, I changed to USB debugging and i already now have 6 usb cables :crying: and it still does not work..i have tried download mode too and it ODIN didnt show the yello mark (so that means ODIN didnt see it too)
When you connect the cable to phone Does it show anything on the notification bar ? Did you tried the same on any other PC or Laptop ? Which windows you are on ?
sahilarora2003 said:
When you connect the cable to phone Does it show anything on the notification bar ? Did you tried the same on any other PC or Laptop ? Which windows you are on ?
Click to expand...
Click to collapse
It shows "USB connected - MTP connected" on the phone but no sound or notification shows on the PC. I am running windows 7, 64-bit operating system
tbagtbee said:
It shows "USB connected - MTP connected" on the phone but no sound or notification shows on the PC. I am running windows 7, 64-bit operating system
Click to expand...
Click to collapse
Then I am sure its a problem releated to drivers.
Download them from here. Remember to Remove previous drivers installed on your PC
Hey!
Today I recieved my sgsa and tried to connect it to the computer via usb. I slide the status bar and click USB CONNETCED (MTP Connected) but... nothing happens in my gio the robot (android) appeared and I could connect my phone. I installed kies and downloaded drivers but it doesn't help. Anyone knows the solution? Please, help.
Did you turn on 'USB debugging'
before connecting your phone to PC ??
Vía xÐÆ Øffíçíal™
You can also goto options, network, more options, usb connect to pc, and plug the cable
Sent from my GT-I9070 using xda app-developers app
Hello everyone,
Here the problem, I just acquired a Galaxy note and I can not connect to my Windows 8 PC (or windows 7) . Whether with or without kies.
In the device manager I have "unknown device"
I also tried odin mode and recovery of origin, but no way to install the drivers.
The galaxy shows in the bar notif "mtp connected" ( the smartphone is charging)
It is version 2.3.6. stock not root with kernel: [email protected]#2
did someone have an idea?
thank you in advance for your help.
Sorry for my english, i'm french.
U can set it in Settings > USB
But since u are using GingerBread, ur device might not be able to detect the usb port as more than charging port. This is very unlikely but it can happen..
And do Enable USB Debugging..
i have tried but it doesn't work too
uninstall kies and drivers reboot the pc. then download
http://developer.samsung.com/android/tools-sdks/Samsung-Andorid-USB-Driver-for-Windows
and install it without the phone connected. connect the phone and see what happens.. when you connect the phone, there will be notification of drivers being installed in the system tray of pc. click on it and you will see what is installed and what is failing.
Change ur usb cable to another usb port. This happened to me last time when I tried to flash new rom via odin. Everything is fine but the odin didn't detected it. b4 do that remember to install ur GN driver.
Sent from my GT-N7000 using xda app-developers app
i have tried to reinstall drivers but always the same problem "windows can't install the device...)
i have tried use 3 diferents usb cable too... no result
I would like change the rom (to see if it was the probleme) but it's impossible without root. And the phone don't propose upgrade OTA...
There could be a problem with the usb port itself. You could try to clean it and test again.
i have do this but no result...
tony_the_unik said:
i have do this but no result...
Click to expand...
Click to collapse
Then it could be your mini USB cable. Try another cable.
Edit: Sorry, accidentally misread something. You tried 3 usb cables. My bad.
Click to expand...
Click to collapse