Related
Hello,
My Samsung Galaxy S is listed as Unknown Device.
It started after an update to 2.2 via Kies and i did that with the regedit exploration. That was the 2.2 beta and then i updated it again with the official release this time also with the regedit exploit. I have formated the internal SD (i cant dismount it cause im on froyo i guess? atleast there is no option about it). Factory reset and so on.
Reinstalled kies 5 times, installed USB drivers again and again. I have tried it on different platforms with both XP (32-bit), Vista (32-bit) and Slackware Linux (32-bit). The computors just cant find drivers for the device.
I have tried all the different usb options in the phone settings nothing happends. I think i have tried everything that can be found here and on google...
The phone is Rooted and im now on PDA: I9000XWJP6, PHONE: I9000XXJPM, CSC: I9000XEEJP4.
Build Info: 2010. 10.
I believe the main thing here is that i dont even get the MTP application in the phone to recognize that a USB connection have been initialized. Nothing happend in the phone when i connect the USB no MTP screen or anything, just chargeing. I have tried 2 diffrent usb cords both that worked before so its not that.. The computor just says unknown device and Kies dont notice anything at all.
I have tried installing another firmware with Odin in Download mode and stil unknown device.
So i believe the phone have, in some way lost its internal usb drivers? I have also noticed that the battery "100% charged" icon does not disapear after i disconnect the usb or the charger. Also sometimes the icon continues to charge after i disconnect. Sometimes when i turn the phone of it starts by itself after like 2 min.
Anyways! What i was wondering is if there is a way to install an official firmware via update.zip volume-up+home+power?
When i try to install a customized rom with update.zip it says:
E:signature verification failed Installation aborted.
Cause of 3e bootloader? But i think its best to maby have a good stable firmware before i go customized?
So any help would be appreciated!!! heeeeeeeelp.....
Try installing theses drivers x64 x86 depending on what operating system you're on.
If that doesn't work try going into download mode and connect with odin. With the recovery problem you need to flash 2e recovery
You can also try and download and flash the latest version firmware to your phone and see if that helps.
Good luck and tell me how it goes
Serikiito said:
Try installing theses drivers x64 x86 depending on what operating system you're on.
If that doesn't work try going into download mode and connect with odin. With the recovery problem you need to flash 2e recovery
You can also try and download and flash the latest version firmware to your phone and see if that helps.
Good luck and tell me how it goes
Click to expand...
Click to collapse
Hi m8!
Thx for the reply!
I have allready tried installing those drivers doesnt work for me.
I have tried Download mode with Odin to, it still says Unknown Device in Windows (i have Vista 32-bits, but tried it on XP and Linux to).
So anything that has to do with a USB-connection seems impossible at the moment...
The phone dont start the MTP application at all and windows dont install the drivers, it just says unknown device when trying to install.
I just unistalled Kies and removed everything from regedit with "kies" in it and then rebooted and downloaded a new fresh Kies file. Installed it and rebooted again while i wiped the phone, formated the SD and did a factory reset.. still "Unknown Device" :[
The problem seems to be the software in the phone.. so my question is: Is there is anyway to update or flash the firmware in the phone without any USB connection?
Is there maby any way to get 2e recovery mode without usb connection?
Endombed said:
Is there maby any way to get 2e recovery mode without usb connection?
Click to expand...
Click to collapse
There is an app in the Android Development section here that allows you to flash a kernel within Android. Never tried it myself but I believe it is now stable and you could use it to flash CF-Root internally
EDIT: Here you go...
http://forum.xda-developers.com/showthread.php?t=877444
Have you tried recovery mode? Big yellow triangle with Android man holding shovel. Then connect to PC with Kies running and click on firmware update button.
Thx man!
But it seems that i dont have root access anymore, so cant use that app either :/ i think im a hopeless case.. :[
Tehpriest said:
Have you tried recovery mode? Big yellow triangle with Android man holding shovel. Then connect to PC with Kies running and click on firmware update button.
Click to expand...
Click to collapse
Yes man.. i get the same thing with the Yellow friend that says "Do not turn of target!!!"..
"One of the USB devices attached to this computor has malfunctioned. And Windows does not recognize it."
and also
"Unknown Device Installed
The software for this device has been successfully installed.
Unknown device - - Ready to use"
Are you connecting through a hub or direct to the back port of the PC. A hub will cause problems. If direct then try this.. Plug in and wait till you get the unrecognised device info. go into device manager, identify the device it will either say Samsung or unknown device. right click and remove device say yes if it asks if you want to delete the driver. now restart the pc after unplugging the usb then after it has fully restarted and connected to the net plug it back in again. Hopefully it will look on the net for the driver and install the correct one.
Tehpriest said:
Are you connecting through a hub or direct to the back port of the PC. A hub will cause problems. If direct then try this.. Plug in and wait till you get the unrecognised device info. go into device manager, identify the device it will either say Samsung or unknown device. right click and remove device say yes if it asks if you want to delete the driver. now restart the pc after unplugging the usb then after it has fully restarted and connected to the net plug it back in again. Hopefully it will look on the net for the driver and install the correct one.
Click to expand...
Click to collapse
Yep tried that to.. i have even tried it on 3 diffrent computers 2 of them in all usb ports.. and everything els works that was connected in those ports.
I dont think its the software in the computer that is the problem.. :/
I believe there is some internal (in the phone) usb firmware problem, if thats possible?
i have exactly the same problem my usb by giving uknown device (i used it at 3 computer with kies software) it seems usb not working anywhere.
I believe our only solution is to find a way to install e2 recovery via the phone.
I have this problem also.
My SGS is rooted.
I tried everything. Googled many hour.
I din't know what more to do.
I have "Android system recovery <2e>" Is this an advantage?
I turned the phone in to my provider. this message is what i got from the repairservice.
Repair Details: The phone's charge connector is moisture/water -damaged, can not be repaired. returned without action.
WTF?!! i have been really careful with the phone. The only thing i can think of is that it has been really cold where i live (Sweden) and i had it in my pocket.. but i mean cmon! it goto withstand that!
I guess i have to wait for samsung to make it possible to update firmware via Wifi.
Neon2 said:
I have this problem also.
My SGS is rooted.
I tried everything. Googled many hour.
I din't know what more to do.
I have "Android system recovery <2e>" Is this an advantage?
Click to expand...
Click to collapse
With Recovery 2e i think it can be possible to update your phones firmware with the update.zip file but i think you need to have your phone rooted.
Repair Details: The phone's charge connector is moisture/water -damaged, can not be repaired. returned without action.
All makes of Smartphone seem to suffer from, condensation problem .
Or at least thats what the service centres
jje
Endombed said:
With Recovery 2e i think it can be possible to update your phones firmware with the update.zip file but i think you need to have your phone rooted.
Click to expand...
Click to collapse
I think so. I have my phone rooted and also ROM Flash Manager installed. The issue now is to find an european stock image to flash compatible with ROM Flash Manager
I looked for the stock firmware image (my phone has JF3) but can't find where.
Anyone?
I don't want to flash a cooked image just in case I have to ship the phone to the repair service.
Hello, I have exactly the same problem.
My SGS is unrooted, due to warranty, and alway keep it with maximum care (it is not a free phone...).
Symptoms are the same:
-It started after an update to 2.2 via Kies
-Absolutely unrecognized by windows (xp32 and win764) anymore
-battery "100% charged" icon does not disappear after i disconnect the usb or the charger
-turning the phone off it starts by itself after like 2 min.
More: incredible but sometimes when connected to car charger, I have the message "usb connected".
Already tried all possible (unrooted) tricks.
I believe usb internal drivers (if any) are corrupted (maybe by moisture?), how to reinstall them?
Maybe usb connector damaged; I have moved a little bit with a scrwdrvr the usb connector plate and clean with air and a thin blade but no result.
I will bring to service, as warranty is still valid, but surely they will discard me (I am optimist)
If there is any solution, please post it.
Hello,
Same here, can't connect phone to pc, mtp dont start on phone after connect it on pc !
Anyone know how flashback stock rom if its possible ?
Hi someone have a stock firmware for flash it in to recovery ?
I think i will try send the phone to samsung after reflashing for see what the guys from samsupport says about this !
Yes, if a part of firmware has been corrupted (with usb info for pc recognition) maybe the solution is to reinstall entire rom.
How to find a stock rom?
How to reinstall rom from SD card in a non rooted phone with no usb connection?
I have drivers installed, I've used Odin before but now it won't recognize the phone in download mode. It'll see it when it is on though. Any help??? This happened after updating to 2.3.3 through Kies.
Just noticed that the PC doesn't recognize the phone either now. Must be drivers issue. How do I fix it???
Diaf82 said:
I have drivers installed, I've used Odin before but now it won't recognize the phone in download mode. It'll see it when it is on though. Any help??? This happened after updating to 2.3.3 through Kies.
Just noticed that the PC doesn't recognize the phone either now. Must be drivers issue. How do I fix it???
Click to expand...
Click to collapse
Ok while in download mode n unplugged from pc....open up device manager.....then connect ur phone....does it refresh ?
Daneshm90 said:
Ok while in download mode n unplugged from pc....open up device manager.....then connect ur phone....does it refresh ?
Click to expand...
Click to collapse
Yes..."SAMSUNG USB composite Device" comes up with an error. Device status shows, "This deveice cannot start. (Code 10)"
Nexus S Drivers?
Maybe u can try with Nexus S Drivers.
U can donwload from developer.android.com/sdk/win-usb.html
Diaf82 said:
I have drivers installed, I've used Odin before but now it won't recognize the phone in download mode. It'll see it when it is on though. Any help??? This happened after updating to 2.3.3 through Kies.
Just noticed that the PC doesn't recognize the phone either now. Must be drivers issue. How do I fix it???
Click to expand...
Click to collapse
In Kies, there are Kies Driver installer, that install a bunch of drivers for phone.
Try to install all drivers and then connect phone again.
hamsterkiller said:
In Kies, there are Kies Driver installer, that install a bunch of drivers for phone.
Try to install all drivers and then connect phone again.
Click to expand...
Click to collapse
This did it! Thanks.
hi guys
I have a same problem, but i have a little difference.
When i plug the cabel in download mode - nothing happen
What I could to do in this situation? Thanks for your advice
jerzyk_ said:
hi guys
I have a same problem, but i have a little difference.
When i plug the cabel in download mode - nothing happen
What I could to do in this situation? Thanks for your advice
Click to expand...
Click to collapse
do you have the kies drivers installed? and is kies not running (inc. shut down tray agent?
try another usb port, that was a problem I had, Odin is picky with good or bad usb ports...
jerzyk_ said:
hi guys
I have a same problem, but i have a little difference.
When i plug the cabel in download mode - nothing happen
What I could to do in this situation? Thanks for your advice
Click to expand...
Click to collapse
Try this http://forum.xda-developers.com/showthread.php?t=961956
Sent from my GT-I9000 using XDA App
SamHaLeKe:
So i tried this, but it doesnt help. I still have in device manager something wrong.
When I'm trying Update Driver Software, windows cant found right driver...
Is it possible, that I something f*ct up at last flash? Before it everything works fine. When I flashed first time, i forgot the *.pit file - odin wrote "failed" - I tried it again, but correctly - everything was ok - I fashed kernel - after that in CMW I Instaled *.zip file with Juwe's ROM 4.3.1 and my phone reboot in landscape mode... and i cant change it to normal mode.
I tried factory reset from phone - there are some red lines with this: tsf format failed on dev/block/mmcblk0p2, but when i go to CWM mode through (volUP+home button+on/of button) and i did a factory reset there - is it without red lines. Somebody ask me if i tried reflash - so i am here with my "driver problem"
hi mate i had the very same prob.uninstall kies then run a registery cleaner to clean up the registery.that solved it for me
then reinstall kie
toxic1 said:
hi mate i had the very same prob.uninstall kies then run a registery cleaner to clean up the registery.that solved it for me
then reinstall kie
Click to expand...
Click to collapse
Noooooo, not reinstall that bloath ware, just the NEW drivers!
Sent from my GT-I9000 using XDA App
lol ok then just drivers then
I know this may sound dumb, but make sure you are using a compatible cable.. i.e. does data transfer, I bough a replacment cable months ago for my damaged one under the impression it did data because I could connect and transfer to USB (I know this is data)... but kies would not recognize the phone.. I ended up buying a real replacement. Problem solved.
I think, that my biggest problem is cannot connect to kies and odin...
i am in the end... so cabel is the same, i used it when i flashed befor - as i said my problem is in phone, not in drivers or cabels. Is here something to do flash without this drivers?
can you confirm there is no issue with your USB ports on your computer? just seems odd it wont recognize your phone in download mode... you are placing it in download mode when using odin right?
I just did a flash with mine to a stock rom,
Same problem, I can get to DL mode, but it does not recognize,
When I am in the standard Tab OS, with USB as mass storage, I can see if fine.
Odd how it just happened as well. I'd like to follow this thread see where it goes.
*edit reinstalling drivers does not resolve the issue,
- have not tried installing keis again yet though,
- also Odin recognizes it in Recovery Mode
*edit again - sorry guys, didnt realize i was in the i9000 forum, hit this on a google search and replied
I can go to the download mode throught 3-buttons combo - but odin recognize my phone - the same thing is in kies - it's vicious circle - i hope flash help me - but I cant do it, because i cant connect to odin
Unfortunatly I am out of help... I thin kyou may need someone who knows ADB and the phones system internals if ODIn won't recognize your phone in Donload mode... I have had my phone in several bad situations(Fried internalsd/bootloaders) but download mode would always connect me to ODIN..
Last try, try different versions of odin, 1.3 - 1.8 apparently it can be testy with different versions of windows.
Try the drivers & Odin 1.83 from my signature. Works all the time.
Hello, so as the title say i have a usb brick, wich means my phone can't get detected by pc ( tested on win7 / win8 / xubuntu ) with different drivers and different cable.
i looked over the form for the problem but no one seems to found a solution, i'm posting this to check if someone has resolved it before ?
my main problem is that i can't get odin to detect the phone, i can't flash any stock now !! :/
anyway please give it a taught, changing Drivers , desinstall and reinstalling drivers doesn't work and i don't have any warranty on the phone.
thanks in advance for your help
Cominox said:
Hello, so as the title say i have a usb brick, wich means my phone can't get detected by pc ( tested on win7 / win8 / xubuntu ) with different drivers and different cable.
i looked over the form for the problem but no one seems to found a solution, i'm posting this to check if someone has resolved it before ?
my main problem is that i can't get odin to detect the phone, i can't flash any stock now !! :/
anyway please give it a taught, changing Drivers , desinstall and reinstalling drivers doesn't work and i don't have any warranty on the phone.
thanks in advance for your help
Click to expand...
Click to collapse
Have you tried enabling usb debugging on the device?
I take it that it does charge right?
Sent from my GT-N7000 using xda app-developers app
Anthropostar said:
Have you tried enabling usb debugging on the device?
I take it that it does charge right?
Sent from my GT-N7000 using xda app-developers app
Click to expand...
Click to collapse
Yes i tried with usb debugging on/off and nothing, the cables charge the phone but doesn't get it to be detected
Not even detected in recovery? Have you tried recovery - mounts & storage - mount USB storage connected to PC?
Could be possible that the use port is broken or you need to change rom to get it working.
What rom are you on right now? If you are rooted, then use mobile odin to flash any stock rom. It also goes without saying that you will need a sd card in this case to transfer files on to the phone.
nokiamodeln91 said:
Not even detected in recovery? Have you tried recovery - mounts & storage - mount USB storage connected to PC?
Could be possible that the use port is broken or you need to change rom to get it working.
What rom are you on right now? If you are rooted, then use mobile odin to flash any stock rom. It also goes without saying that you will need a sd card in this case to transfer files on to the phone.
Click to expand...
Click to collapse
i was using angry ROM v3.2 and now i tried Xperia Note, same problem and thanks for the advice about mobile odin that can be usefull when needed but i just need to figure out the solution for this brick the phone isn't detected on any pc that i used not even on CWM mount and storage
Try another wire?
Tapatalking on my n7000
GuyZ M NEW TO THIS FORM ND NEED UR HELP,ALL OF A SUDDEN MY MOBILE STOPED AND WHEN I REBOTED IT AND CONNECTED TO MY PC IT QAS NOT SHOWING.NO MTP NO FTP WHATEVER IT IS SAID.... NEITHER ON KIES.TRIED ON DIFFERENT SYSTEM ,REBOOTED TWICE BUT STILL NOTHING.
PLEASE HELP ME .
Is it charging via usb?
nokiamodeln91 said:
Is it charging via usb?
Click to expand...
Click to collapse
+1 and check with any other usb port..!
Sent from my GT-N7000 using Tapatalk 2
nokiamodeln91 said:
Is it charging via usb?
Click to expand...
Click to collapse
yes my friend it is.
are you rooted? if yes then you could try installing the rom again using mobile odin.. and see if that helps
Try this,
Boot into recovery, connect the phone & let it install the required drivers.
Boot into Download mode & again let windows install required drivers.
Boot normally & again let it install whatever things that are required to run things
& you are thru. Hope this helps.
ksrulz said:
GuyZ M NEW TO THIS FORM ND NEED UR HELP,ALL OF A SUDDEN MY MOBILE STOPED AND WHEN I REBOTED IT AND CONNECTED TO MY PC IT QAS NOT SHOWING.NO MTP NO FTP WHATEVER IT IS SAID.... NEITHER ON KIES.TRIED ON DIFFERENT SYSTEM ,REBOOTED TWICE BUT STILL NOTHING.
PLEASE HELP ME .
Click to expand...
Click to collapse
Hello, bit of a newbie myself but I may be of help. A couple of questions- has it worked before, and if so, when? Secondly, prior to it stopping working (that is, if it did), did you install any new software on your phone or computer that may have affected the setup?
its not rooted.nd still m nt able to connect to any pc.
ksrulz said:
its not rooted.nd still m nt able to connect to any pc.
Click to expand...
Click to collapse
Sounds like a USB driver issue. Do you have kies installed, or the stock usb drivers installed? Mine can be a bit flakey when connecting with USB though.
Actually sounds like something that happened to me. After upgrading kies my usb drivers got updated to but my pc showed missing id whenever my note got connected. Only solution i found is to reinstall the usb drivers, disconect the pc from internet and then connect the note. After drivers are installed i can connect to the internet again. Shoud i connect the note while connected to internet gives me the missing hardware id again and makes me install drivers again. Hope this helps you.
Guyz thank you Very Much ... But A Small dust Particle Over The USB Wire Was creating the Problem. M Sorry and Thank You Guyz <3
********************************
Forum Closed \m/ Respect XDA Developers
Hello there,
I am Belgian so i'm gonna try to do my best to find my english somewhere
I have a samsung galaxy s3 mini gt-i8190..
I have tried to flash with odin thru pda BUT it stopped with fail as result..
Then i have tried to put original firmware back the same way but fail again,
then tried again with same original firmware and succeeded..
Phone froze at samsung logo, tried again and now i got the message "firmware upgrade encountered an issue. please select recovery mode in Kies & try again."
Ok, so i plug the phone back in the usb cable: Device Not Recognized! (windows 7 ultimate laptop).
I can get in to download mode: still not recognized via usb.
recovery mode DOESN'T work at all (3 button combo) just the error message at the normal boot and the download mode.
So basically i can't flash cause i can't connect, reinstalled drivers, used another pc, same thing...
It doesn't even charge the phone..
Odin mode says:
Product name: GT-I8190
Custom Binary Download: YES (4 counts)
Current binary: Custom
System status: Official
So does there somehow any file exists to put on my sd card to access usb OR a file to go into recovery mode.
Any tip is welcome, will try them all..
Thanks by advance,
yoni089
Have you tried installing Samsung's USB Driver? I know installing kies comes with the USB drivers but just in case. You might want to check if it's properly installed in your computer. Try reseting your counter first with Triangle Away. Please tell me more of what you did.
Click on the thanks button if I helped!
Change usb port and make sure all processes with kies are killed in taskmanager.
Open Odin. Put the phone in download mode and connect usb.
Hello,
Thanks for the reply's
I did install Odin first, when i flashed my phone it failed..
So i decided to install kies to make sure i had the right drivers,
Uninstalled Kies without the drivers. The phone was still recognized back then!!
Flashed it again and again FAIL!
Since then NOTHING works with the usb connection, windows does not recognize my phone "unknown device".
So it doesnt even know what it is..
Uninstalled the drivers and reinstalled them, rebooted my laptop with battery out for a minute but nothing works..
Also i tried to connect to another pc but no luck..
So i guess the key on my phone for the driver to find is missing/deleted by flashing and failing..
That's why i asked if there is any file to putt on my sd card to be recognized by my computer.
I did tried many times using another usb port..
Also tried with and without sim card/ sd card.
(btw: does they have to be in there anyway?)
Thnx and grtz,
Yoni089
please post where odin fail?
samersh72 said:
please post where odin fail?
Click to expand...
Click to collapse
Sorry, can't say.
It was somewhere in the last 20% if i'm right, its been a week from now and did not take a log of it with reflashing in mind..
yoni089 said:
Sorry, can't say.
It was somewhere in the last 20% if i'm right, its been a week from now and did not take a log of it with reflashing in mind..
Click to expand...
Click to collapse
before flashing, make sure you can see a COM: something when you connect your device.
Sent from 12*.5x.**.58
SethCode'z said:
before flashing, make sure you can see a COM: something when you connect your device.
Sent from 12*.5x.**.58
Click to expand...
Click to collapse
I know that, my connection worked fine i did see the com: port in odin and it said "added!".
then i started flashing again and suddenly "fail", got the triangle, went back to download mode, tried to connect again and windows OR Odin didn't recognized my phone anymore, device not recognized and no "com:" in odin.
Tried different ports, battery out for a minute, no sim, no sd, reinstalled drivers, nothing works..
That's the point why i made this thread cause i see no solution in this anymore, if i have no usb connection i can't flash ( OR IS THERE A WAY???), if i can't flash i probably can't get usb connection..
thx for the effort
grtz,
Yoni089
yoni089 said:
I know that, my connection worked fine i did see the com: port in odin and it said "added!".
then i started flashing again and suddenly "fail", got the triangle, went back to download mode, tried to connect again and windows OR Odin didn't recognized my phone anymore, device not recognized and no "com:" in odin.
Tried different ports, battery out for a minute, no sim, no sd, reinstalled drivers, nothing works..
That's the point why i made this thread cause i see no solution in this anymore, if i have no usb connection i can't flash ( OR IS THERE A WAY???), if i can't flash i probably can't get usb connection..
thx for the effort
grtz,
Yoni089
Click to expand...
Click to collapse
With what you're saying, it seems something has gone corrupt. Maybe a binary or an image. Flashing a rom using your phone might fix this but it's not a 100% success. It might destroy your phone more or fix it. It's a 50/50... :fingers-crossed:
SethCode'z said:
With what you're saying, it seems something has gone corrupt. Maybe a binary or an image. Flashing a rom using your phone might fix this but it's not a 100% success. It might destroy your phone more or fix it. It's a 50/50... :fingers-crossed:
Click to expand...
Click to collapse
And how exactly does this work?
I guess with the sd card but i don't have recovery mode so..
yoni089 said:
And how exactly does this work?
I guess with the sd card but i don't have recovery mode so..
Click to expand...
Click to collapse
Did your three button combination work for recovery mode before this happened?
tys0n said:
Did your three button combination work for recovery mode before this happened?
Click to expand...
Click to collapse
I have no idea, i never needed it before..
yoni089 said:
I have no idea, i never needed it before..
Click to expand...
Click to collapse
Ok. Many i8190 was delivered without working combo so I thought I should ask.
What happens when you try to enter recovery? (vol+/home/power)
Nothing at all, completely dead?
tys0n said:
Ok. Many i8190 was delivered without working combo so I thought I should ask.
What happens when you try to enter recovery? (vol+/home/power)
Nothing at all, completely dead?
Click to expand...
Click to collapse
It just turns on to the triangle that says there is an issue with the firmware upgrade..
yoni089 said:
It just turns on to the triangle that says there is an issue with the firmware upgrade..
Click to expand...
Click to collapse
Do provide the odin log, probably corrupted PIT ?
yoni089 said:
It just turns on to the triangle that says there is an issue with the firmware upgrade..
Click to expand...
Click to collapse
aah ok, and Odin doesn't recognize it at all when you connect it in download mode?
linux is your answer it never fails
Sent from my Vodafone Smart II using xda premium
AssToast said:
Do provide the odin log, probably corrupted PIT ?
Click to expand...
Click to collapse
How do i get that log?
tys0n said:
aah ok, and Odin doesn't recognize it at all when you connect it in download mode?
Click to expand...
Click to collapse
no it doesn't, not even my laptop does..
yoni089 said:
How do i get that log?
no it doesn't, not even my laptop does..
Click to expand...
Click to collapse
No kies, correct drivers, tried different ports. Then I don't know. Are you using original USB cable?
I once got a bad flash like you did, but at least Odin detected it and I was able to flash this firmware with repartition, because official stock fw didn't work for me neither.
nuotal you
tys0n said:
No kies, correct drivers, tried different ports. Then I don't know. Are you using original USB cable?
I once got a bad flash like you did, but at least Odin detected it and I was able to flash this firmware with repartition, because official stock fw didn't work for me neither.
Click to expand...
Click to collapse
I did it all
Yes it was the original usb cable..