Hi every one! I give you another good build. It repark from CM Modded Build V.2 by needo, and work with ClockworkMod, so here is the build:
I. Download needed file:
1. CyanogenMod 6.1 V1 - CWM - 23-04.zip
http://www.multiupload.com/QQF81OD7IE
2. npkboot-cwm-v15-x1-monsterKernel.rar
http://www.multiupload.com/R4A7PJE00T
II. before install :
1. Format your sdcard make 4 Partition with recommended size:
1st partition: FAT32 (sdcard / Rest)
2nd partition: EXT2 (system / about 150MB -> depends on the build )
3rd partition: EXT2 (data / about 250MB)
4th partition: EXT2 (cache / about 50MB)
Be sure make all 4 partition primary
2. extract and copy folder npkboot to root of sdcard.
3. Copy Rom ( zip file , don't extract) in to root of sdcard.
III. Install:
1. run Haret, and wait when it will be asked to press "Volume Down" shortly (!!important!! shortly) to launch ClockworkMod Recovery or any other key to usually continue booting into Android.
Press volume Down and wait for menu Recovery.
2. In menu recovery choose "install zip from sd-card" choose zip from sdcard and select "CyanogenMod 6.1 V1 - CWM - 23-04.zip" . Confirm instalation then reboot system.
4. Run HARET again and press any key (except Volume keys) to continue booting into Android.
Tips:
First boot :
*Settings > CyanogenMod Settings > User interface > tweaks extra > load theme > choose CM 6.1 white
- This will change the status bar text colour to white ...
*Launcher settings > change theme > choose the gre theme ...
*disable data transfer
*disable auto-rotate screen
- Android won't performing very well at first running hours, if you have many media files (pic,videos..) .. system will be busy searching for these files & creating thumbnails for them ... the time for that is depending on the quantity of the media on the SD card ..
UPDATE:
- If you can't boot to android, try change modules to Turbo kernel and reinstall.
- If you want stop problem key freeze, download kernel with keyboard as modules and follow this link http://forum.xda-developers.com/showpost.php?p=11808067&postcount=2 how to do ^^!
- For better batterry, download and install SetCPU, then custom it yourself !
- For better speed install ADW Laucher ^^!
Thanks to Neopeek, needo and other developers !
I have done:
- Everything copied to SD following the how to.
- [2011-04-18] FRX06 [CWM] worked, but this rom doesn't work
- Formated ext2 partitions to erease the old rom.
- Using Duckly's Kernel [Turbo Kernel] WITH KEYPAD DRIVERS AS MODULES
Problem:
I can run haret but when I have to click vol down it doesn't launch the recovery mode. it wants to continue.
With the FRX06 it worked but now it doesn't work
BTW: the hyperlink after "Update:" isn't working
Hope you can help me
EDIT: Changing Kernel to Duckly's Kernel [Turbo Kernel] [25-3-2011] WITH KEYPAD DRIVERS NOT AS MODULES has solved my problem.
Is there a way to use the Kernel with keypad drivers as modules?
neoofoox said:
I have done:
- Everything copied to SD following the how to.
- [2011-04-18] FRX06 [CWM] worked, but this rom doesn't work
- Formated ext2 partitions to erease the old rom.
- Using Duckly's Kernel [Turbo Kernel] WITH KEYPAD DRIVERS AS MODULES
Problem:
I can run haret but when I have to click vol down it doesn't launch the recovery mode. it wants to continue.
With the FRX06 it worked but now it doesn't work
BTW: the hyperlink after "Update:" isn't working
Hope you can help me
EDIT: Changing Kernel to Duckly's Kernel [Turbo Kernel] [25-3-2011] WITH KEYPAD DRIVERS NOT AS MODULES has solved my problem.
Is there a way to use the Kernel with keypad drivers as modules?
Click to expand...
Click to collapse
I see, your problem is monster kernel not work with your phone, and when you change it to Turbo kernel it work ^^!
FOr use kernel with kaypad as modules, please read this thread http://forum.xda-developers.com/showpost.php?p=11808067&postcount=2
First: boot to android, then install autostart.apk and GScript.apk.
next: open terminal , remove modules and copy autostart.sh like that thread write. then open GScript and add script like that thread write.
next: reboot to winmobile, copy Turbo Kernel with keypad as modules to your sdcard/npkboot folder, replace the old file in there.
Final: boot to android, then make a shotcut GScript in home screen, when keypad die, just open the shotcut and it will work again.
Hope it have you
I see, your problem is monster kernel not work with your phone, and when you change it to Turbo kernel it work ^^!
Click to expand...
Click to collapse
I have never used Monster Kernel because I think it needs more battery than the Turbo kernel so I changed it to the Turbo Kernel.
After adding "ts-calibration"-file to the npkboot folder, it is starting now
*Settings > CyanogenMod Settings > User interface > tweaks extra > load theme > choose CM 6.1 white
- This will change the status bar text colour to white ...
Click to expand...
Click to collapse
There is no "CM 6.1 white" (CMTheme folder is empty) but the "STOCK_Black" makes the clock visible (status bar still black). Finaly I copied the "CM 6.1 white"-file from the EXT2 version.
Hi All,
***MIUI 8 is now operational on our TCL_S960!
I managed to get it running on TCL S960 (IDOL X+),
Here's my work... (I am not a developer but I followed some instructions online and was able to make it at least for me...)
Probably there will be bugs - so let me know
I'll try to fix what I know...
If you want to use my work elsewhere, you must request in advance and make sure that credits goes to the correct people....
Supported Languages:
All languages that are supported by Xiaomi.EU roms.
Credits:
Xiaomi.eu - for the translations and guides.
Latest version Download links:
Android File Host: (WIP)...
30/Jul/2016 -
Older Versions (Miui8)
24/Jul/2016 (fixes to 14/7/2016) - https://www.androidfilehost.com/?fid=24651429356503158
14/Jul/2016 - https://www.androidfilehost.com/?fid=24591000424947416
7/7/2016 - https://www.androidfilehost.com/?fid=24591020540823614
30/6/2016 - https://www.androidfilehost.com/?fid=24591020540823614
Older Versions (MIUI7):
26/5/2016 - https://www.androidfilehost.com/?fid=24566454284190288
19/5/2016 - https://www.androidfilehost.com/?fid=24533103863143479
12/05/2016 - https://www.androidfilehost.com/?fid=24533103863139453
05/05/2016 - https://www.androidfilehost.com/?fid=24533103863137243
28/4/2016 - https://www.androidfilehost.com/?fid=4996500813288309006
14/4/2016 - https://www.androidfilehost.com/?fid=24499762636000772
7/4/2016 - https://www.androidfilehost.com/?fid=24459283995317117
31/3/2016 - https://www.androidfilehost.com/?fid=24459283995310311
17/3/2016 - https://www.androidfilehost.com/?fid=24459283995303903
XdaDevDB:
Installations:
Important:
Prior to any install make sure to backup your existing ROM. (TWRP backup?) if you wish to backup your SMS/Contacts there are a bunch of apps that can do it... (MobilePro is an example)
Backup your IMEI just in case... (Use MobileUncle or similar)
If you chose to install - your warranty is void.
I am not responsible for any damage that may be caused by this ROM.
Did you make a backup? - Save your backup on a PC...
First time transition to MIUI8 requires re-partition of the phone to increase system size.
you will need a different recovery to finalise the process.
1. Copy the Repartition zip file to phone.
2. Copy the Philz recovery to your phone.
3. Install Philz recovery.
4. Reboot into recovery
5. Install Re-partition zip (It will take several minutes - it needs to format the partitions)
6. if format is not running - reboot to recovery and manually format the partitions (System, Data, Cache). - DO NOT FORMAT other partitions.
6.a. - check to see where the SDCARD data directory is mounted(data or data), if it is the data - change it back to data in the philz recovery, otherwise - upgrades will not work in TWRP.
7. using SP-Flash tools or another way, install the TWRP 2.8.7 recovery again.
8. Restore your backup.
9. Boot the phone.
10. Copy the MIUI8 install file to phone.
11. Click on the 3 dots
12. Chose select update file --> select your copied file.
13. Phone will Reboot and install.
If the above version does not work, you will need to use SP-Flash tools to install the EBR1, EBR2 files in the zip.
Then continue from step 6 (Format partitions)
if coming from another rom/ Fresh install
as ususal... - I recomend a total wipe, but it is not a must....
Wipe Cache, Dalvik, Data, System, custpack.
Install Rom from internal memory
reboot.
Wait patiently - it will take 3-4 minutes on the 1st boot.
To update (existing Miui Rom):
Copy rom to SD Card
Open updater app.
Click on the 3 dots
Chose select update file --> select your copied file.
Reboot
*** Make sure to disable Automated OTA... as it is based on Redmi Note 3G MTK, and I can't promise to keep this forever...
Recovery:
I used TWRP 2.8.7.0 for TCL S960
Other recoveries:
CWM - Link
TWRP 2.6.3 - Link
If you like my work feel free to buy me beer Donation link
Known Issues:
Default theme - some icons are missing - Use another theme icon set...
When making full wipe - unable to login to MiAccount - Install 6.1.28 version --> login, then update to latest.
TouchAssistant APK exceeds the space of System partition - I removed it, you can install it manually after the rom installs. - Link solved after repartition.
31/3/16 - Additional settings FC - Fixed.
12/05/2016 - Fixed wallpaper carousel FC when unlocking device
Some screenshots:
Miui8:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Miui7:
XDA:DevDB Information
TCL S960/Alcatel (IdolX+), ROM for the Android General
Contributors
hellfreezover, Xiaomi.eu
ROM OS Version: 4.4.x KitKat
ROM Kernel: Linux 3.4.x
Based On: MIUI
Version Information
Status: Beta
Current Beta Version: 26-05-2016
Beta Release Date: 2016-07-15
Created 2016-01-22
Last Updated 2016-07-30
Reserved
Changelog: (Latest Version)
24/7/2016 - still based on 6.7.14
Fixed Settings menus.
Enabled "Button mode"
Enabled additional settings to split the menu bar.
Fixed MIUI version to 8...
System seems to be running faster...
Older versions:
14/7/2016
System
Fix - Fingerprint issues (07-12)
Fix - Fingerprint scanner made the device freeze and reboot (07-12)
Lockscreen, Status Bar, Notification Bar
Optimization - Clickable arrow for Wi-Fi (07-12)
Optimization - A prompt about entering password and activating fingerprint after rebooting the device (07-13)
Fix - Customized carrier name isn't shown in Second space (07-12)
Home screen
Optimization - Landscape mode for Task manager (07-08)
Optimization - Task Manager stability (07-13)
Fix - Issues with wallpaper when switching to Second space (07-13)
Delete - Home screen Music widget (07-13)
Gallery
New - Delete directly from the screenshot preview page (07-12)
Optimization - Adjusted size for the button which creates new albums (07-12)
Optimization - "Show original" option appears only on cloud or optimized items (07-12)
Optimization - Double tap to zoom in, swipe up without entering sharing mode (07-12)
Optimization - When auto-rotate is off in Gallery, it won't influence the rest of the system (07-13)
Fix - Scrolling screenshot issues in Notes and Mail (07-12)
Fix - Couldn't go back to the original photo after making a screenshot or finishing editing/sharing it (07-12)
Fix - Couldn't pick up calls while making Scrolling screenshots (07-13)
Fix - Enter system app while editing a scrolling screenshot in the OOB flow (07-13)
Delete - Removed Edit option for GIF images (07-12)
Weather
Fix - Issues with curves in forecasts (07-13)
Optimization - Set C/F in settings (07-13)
7/7/2016
Highlights
New - Saved and available Wi-Fi networks appear first in the list (07-05)
New - After a permission is restricted, a clickable notification is sent to the user which can restore permissions (07-05)
Lock Screen, Status Bar, Notification Bar
New - Animation of WiFi connection (07-07)
Optimization - separate "Ringtone and Vibration" permission in Notification （07-07）
Fix - Switching notification bar style in landscape view issues (07-07)
Fix - In Second Space, enter Mi Home in lock Screen issue (07-07)
Desktop
Optimization - Restore app uninstallation sound effect (07-07)
Fix - Recent app tray, long press to enter wrong app info page issue (07-07)
Fix - Recent app tray, switching view mode issues (07-07)
Settings
New - Saved and available Wi-Fi networks appear first in the list (07-05)
Clock / Calculator
Optimization - "Shutdown alarm", "Set default alarm sound" moved up In Clock settings. (07-01).
30/6/2016 - Miui 8.
26/5/2016 -
Gallery
New - Deleting synced photos from internal storage without deleting from Mi Cloud (05-25)
Cleaner
Optimization - Accessibility support (05-24)
Fix - FC issues (05-24)
19/05/2016 -
System
Optimization - Background CPU processes caused performance issues (05-16)
Optimization - Delayed response for charger's notifications (05-19)
Fix - Wireless display caused reboots (05-19)
Fix - Read mode appeared more red than it should be (05-19)
Fix - Draining battery while using GPS in some cases (05-19)
Fix - Bluetooth turned on automatically with the device (05-19)
Settings
New - Introducing Shortcut menu. Check out the new MIUI 8 feature early. You can turn it on in Additional settings. (05-17)
TouchAssistant must be installed post rom.
Mi Cloud
New - Added "Back up now" feature for fast backups (05-19)
12/05/2016 -
System
Optimization - System storage UI (05-05)
Optimization - Background processes kept CPU busy and lead to performance issues (05-09)
Fix - Issues with adding fingerprint (05-05)
Fix - Problems with sound when listening to some songs using earphones (05-05)
Fix - Issues with video chats in some cases (05-05)
Fix - Sound disappeared in long phone conversations (05-05)
Fix - Fingerprint unlock didn't respond in some cases (05-05)
Backup
New - Optimizing transferring rate in File Transfer (05-09)
05/05/2016 -
System
Optimization - System storage UI (05-05)
Fix - Issues with adding fingerprint (05-05)
Fix - Problems with sound when listening to some songs using earphones (05-05)
Fix - Issues with video chats in some cases (05-05)
Fix - Sound disappeared in long phone conversations (05-05)
Fix - Fingerprint unlock didn't respond in some cases (05-05)
Security
New - Added on/off switch for App lock (05-03)
New - Customized settings for App lock (05-03)
28/4/2016 -
System
Optimisation - Improved speed and performance for devices which have been used for a long time (04-27)
Weather
New - New white design (04-27)
Cleaner
New - New design for Cleaner (04-27)
Gallery
New - Progress list for syncing with Mi Cloud (04-27)
Optimization - Added a prompt notifying about Mi Cloud trash bin when deleting photos for the first time (04-27)
Optimization - Improved sharpness for big photos (04-27)
Security
New - Fingerprint support for App lock in Redmi 3 Pro (04-27)
14/4/2016 -
System
Optimization - Improved algorithms for Silent and DND modes to be used at the same time. (04-13)
Fix - Storage leaks lead to performance problems (04-08)
Fix - Security Center FC in Hebrew Language
7/4/2016 -
Lockscreen, Status Bar, Notification Bar
Optimization - Improved order of switches in notification shade (04-06)
Fix - Music lock screen appeared when a game was running in the background (04-06)
Settings
Optimization - Improved algorithms for international roaming (04-06)
Mi Account
New - Added more items to personal info (04-06)
Cleaner
Optimization - Press and hold to add items to exceptions (04-06)
Optimization - Fixed problems with performance after clean-ups (04-06)
Mi Cloud
Fix - Couldn't find device or sign in to Mi Account due to wrong system time (04-06)
Fix - Fixed issues with incorrect time in backup lists (04-06)
Bug fixes by Xiaomi.
Fixed Additional settings FC.
31/3/2016 general bug fixes by Xiaomi.
24/3/2016
System
Optimization - Apps open faster, system animations work smoother (03-17)
Optimization - Increased image processing speed for image decryption database (03-22)
Fix - Problems with performance after switching from mobile data to Wi-Fi (03-18)
Backup
In some cases Mi Mover stopped working after the connection was established (03-18)
Clock / Calculator
New - Option for deleting an alarm automatically after it was used if it had been set to go off only once (03-23)
thank you
thank you for this awesome Rom. but the sound setting under audio force closes im on viper4android
Did you try sound settings without viper?
For me it works... but I did had to do a clean install...
Sent from my ASUS_Z00XS using XDA Free mobile app
Hi i just tried your rom bt i am stuck at mi login.. It says checking find device status and stays there only.... What to do now...?
santhosh5639 said:
Hi i just tried your rom bt i am stuck at mi login.. It says checking find device status and stays there only.... What to do now...?
Click to expand...
Click to collapse
Try using an older version like 6.1.28, then log in to miui, then update without full wipe.
I have reported this to miui, it is under discussion...
Sent from my ASUS_Z00XS using XDA Free mobile app
Updated OP with the link to 6.1.28 version
Sent from my ASUS_Z00XS using XDA Free mobile app
Updated OP with MIUI 8 for TCL.
Sent from my ASUS_Z00XS using XDA Free mobile app
Bricking my phone
Dear Hellfreezover,
I tried to install your ROM, but I bricked my phone.
(I installed ROM before several times, I never made mistake, but now I did it.)
When I used SP flashtool I selected "Firmware upgrade" option instead of "Download only" option (I never did it before) and I started to install TWRP recovery but I got error message.
Now I can not use my phone, but I know that I can be repairable just I need important files....
...these all files or just some of them:
- PRELOADER
-MBC
-EBR1
-UBOOT
-BOOTIMG
-RECOVERY
-SEC-RO
-LOGO
-EBR2
-CUSTPACK
-MOBILE_INFO
-ANDROID
-CACHE
-USRDATA
Now I get this error message when I try to update the recovery.
Could u send me these files? Or could you link me URL where I can find these files?
Sorry for disturbing, I shame on me, I did ROM install before without mistake, but now I screwed up...
Regards,
Peter (Hungary)
I am not at home now,
I have the files...
You can get searching TCL multi language rom 70 languages and download it through SP flash tools, then, repartition and finally the rest....
Sent from my ASUS_Z00XS using XDA Free mobile app
Olympos.81 said:
Dear Hellfreezover,
I tried to install your ROM, but I bricked my phone.
(I installed ROM before several times, I never made mistake, but now I did it.)
When I used SP flashtool I selected "Firmware upgrade" option instead of "Download only" option (I never did it before) and I started to install TWRP recovery but I got error message.
Now I can not use my phone, but I know that I can be repairable just I need important files....
...these all files or just some of them:
- PRELOADER
-MBC
-EBR1
-UBOOT
-BOOTIMG
-RECOVERY
-SEC-RO
-LOGO
-EBR2
-CUSTPACK
-MOBILE_INFO
-ANDROID
-CACHE
-USRDATA
Now I get this error message when I try to update the recovery.
Could u send me these files? Or could you link me URL where I can find these files?
Sorry for disturbing, I shame on me, I did ROM install before without mistake, but now I screwed up...
Regards,
Peter (Hungary)
Click to expand...
Click to collapse
Check your PM - I sent you a link with all files needed...
Updating problem
hellfreezover said:
Check your PM - I sent you a link with all files needed...
Click to expand...
Click to collapse
Thank you very much, I could unbrick my mobile! :good: :fingers-crossed: :highfive:
I tried to upgrade my ROM according to your instructions, but I could not do it.
What I did:
1. Unbrick my mobile with your files.
2. I copied your MIUI8 ROM, Repartition and Philz zip files to my mobile.
3. In SP Flash I downloaded Philz.zip what contains recovery.
4. I rebooted my mobile in recovery mode.
5. I installed the Repartition zip. (...but I think it was unnecessary, because I did it when I unbricked my mobile.)
6. I tried to reboot my mobile into reocvery mode, but it was not available (after repartition.)
7. I had to download your TWRP 2.8.7.0 recovery to my mobile via SP-Flash tool.
8. I tried to reboot, but same situation: this recovery also was not available.
9. I had to download other 2.6.3 or 2.7.0 TWRP recovery to my mobile.
10. I could reach recovery from that point.
11. I installed your MIUI 8 rom, and it was successful according to message.
12. In spite fo this the ROM can not start: "Idol X+" is appearing and go away and black screen is flashing without logo or sound.
What do I do in wrong way?
Otherway, before I unbricked my mobile and after also I tried to upgrade my ROM to your MIUI 8 version in different way.
Then I had different problem: when I did the uploading of your ROM into my exist differnet rom (like offical ROM, LeWa ROM or modded MIUI 5 rom) in recovery mode the installation was finally failed, unsuccessful: "/data" directory can not reachable/readable/writeable or somehting else.
(I have screenshot, I will share.)
Regards,
Peter
Olympos.81 said:
Thank you very much, I could unbrick my mobile! :good: :fingers-crossed: :highfive:
I tried to upgrade my ROM according to your instructions, but I could not do it.
What I did:
1. Unbrick my mobile with your files.
2. I copied your MIUI8 ROM, Repartition and Philz zip files to my mobile.
3. In SP Flash I downloaded Philz.zip what contains recovery.
4. I rebooted my mobile in recovery mode.
5. I installed the Repartition zip. (...but I think it was unnecessary, because I did it when I unbricked my mobile.)
6. I tried to reboot my mobile into reocvery mode, but it was not available (after repartition.)
7. I had to download your TWRP 2.8.7.0 recovery to my mobile via SP-Flash tool.
8. I tried to reboot, but same situation: this recovery also was not available.
9. I had to download other 2.6.3 or 2.7.0 TWRP recovery to my mobile.
10. I could reach recovery from that point.
11. I installed your MIUI 8 rom, and it was successful according to message.
12. In spite fo this the ROM can not start: "Idol X+" is appearing and go away and black screen is flashing without logo or sound.
What do I do in wrong way?
Otherway, before I unbricked my mobile and after also I tried to upgrade my ROM to your MIUI 8 version in different way.
Then I had different problem: when I did the uploading of your ROM into my exist differnet rom (like offical ROM, LeWa ROM or modded MIUI 5 rom) in recovery mode the installation was finally failed, unsuccessful: "/data" directory can not reachable/readable/writeable or somehting else.
(I have screenshot, I will share.)
Regards,
Peter
Click to expand...
Click to collapse
Hi,
I think what you missed is the format of system, data, cache - after the installation of re partition, in Philz recovery.
also - you need to verify that your SD-Data is mounted correctly (sometimes in Philz it adds a 0, and then you will not find files there...
You need to change the mount location before you reboot recovery.
Sorry I have no pictures for this, but it is in the menu...
if the above does not work
Try extracting EBR1, EBR2 from repartition file, install them with Philz recovery through SP-Flash tool.
reboot into recovery --> format data, system, cache - check again where SD is mounted...
Reboot recovery
Install rom - if works great if not:
Install TWRP 2.8.7
Place new ROM and install
let me know if this works for you.
The 1st install will take a few minutes until you will see something on the phone...
hellfreezover said:
Hi,
I think what you missed is the format of system, data, cache - after the installation of re partition, in Philz recovery.
also - you need to verify that your SD-Data is mounted correctly (sometimes in Philz it adds a 0, and then you will not find files there...
You need to change the mount location before you reboot recovery.
Sorry I have no pictures for this, but it is in the menu...
if the above does not work
Try extracting EBR1, EBR2 from repartition file, install them with Philz recovery through SP-Flash tool.
reboot into recovery --> format data, system, cache - check again where SD is mounted...
Reboot recovery
Install rom - if works great if not:
Install TWRP 2.8.7
Place new ROM and install
let me know if this works for you.
The 1st install will take a few minutes until you will see something on the phone...
Click to expand...
Click to collapse
Yes, u have right: during procedure, before I would install the MIUI 8 rom in TWRP 2.8.7.0 the SD-DATA is unmounted, internal storage is 0.
What can I do to reach it again?
---------- Post added at 05:49 PM ---------- Previous post was at 05:02 PM ----------
Olympos.81 said:
Yes, u have right: during procedure, before I would install the MIUI 8 rom in TWRP 2.8.7.0 the SD-DATA is unmounted, internal storage is 0.
What can I do to reach it again?
Click to expand...
Click to collapse
My problem is now:
/E: Unable to mount '/system'
/E: Unable to mount '/protect_s'
/E: Unable to mount '/protect_f'
Olympos.81 said:
Yes, u have right: during procedure, before I would install the MIUI 8 rom in TWRP 2.8.7.0 the SD-DATA is unmounted, internal storage is 0.
What can I do to reach it again?
---------- Post added at 05:49 PM ---------- Previous post was at 05:02 PM ----------
My problem is now:
/E: Unable to mount '/system'
/E: Unable to mount '/protect_s'
/E: Unable to mount '/protect_f'
Click to expand...
Click to collapse
you can change the mount location in Philz recovery...
6.a. - check to see where the SDCARD data directory is mounted(\data or \data\0), if it is the \data\0 - change it back to \data in the philz recovery, otherwise - upgrades will not work in TWRP.
I followed your instruction, please see my notes and check my pictures:
1. Copy the Repartition zip file to phone.
OK!
2. Copy the Philz recovery to your phone.
OK!
Please see it, I copied everything to my phone from Window 10, so these files copied into /data directory:
http://kepfeltoltes.hu/160717/factory_directory_www.kepfeltoltes.hu_.jpg
3. Install Philz recovery.
I did it from factory recovery:
http://kepfeltoltes.hu/160717/IMG_1596_www.kepfeltoltes.hu_.jpg
(You can not see the "Philz*.zip" file because of bad quality of picture, but belive me, it is.
4. Reboot into recovery
OK!
5. Install Re-partition zip (It will take several minutes - it needs to format the partitions)
I did it:
http://kepfeltoltes.hu/160717/IMG_1597_www.kepfeltoltes.hu_.jpg
6. if format is not running - reboot to recovery and manually format the partitions (System, Data, Cache). - DO NOT FORMAT other partitions.
6.a. - check to see where the SDCARD data directory is mounted(data or data), if it is the data - change it back to data in the philz recovery, otherwise - upgrades will not work in TWRP.
I did not need the format, because your Repartition.zip was installed successfully, and format was done by Repartition.zip as you requested:
Begin:
http://kepfeltoltes.hu/160717/IMG_1598_www.kepfeltoltes.hu_.jpg
End:
http://kepfeltoltes.hu/160717/IMG_1599_www.kepfeltoltes.hu_.jpg
7. using SP-Flash tools or another way, install the TWRP 2.8.7 recovery again.
Because of your Repartition procedure all files were deleted from /data directory so I had to upload TWRP 2.8.7.0 recovery from SP-Flash tool to mobile:
http://kepfeltoltes.hu/160717/Recovery_www.kepfeltoltes.hu_.jpg
8. Restore your backup.
(I do not know what is it...maybe I make a mistake here. I skiped this step.)
9. Boot the phone.
OK.
10. Copy the MIUI8 install file to phone.
Negative. There is no operation system, because Repartition.zip formatted /data and /system directory.
Furthermore, Internal storage is 0 from the Repartition.zip is completed.
http://kepfeltoltes.hu/160717/IMG_1603_www.kepfeltoltes.hu_.jpg
11. Click on the 3 dots
Negative.
12. Chose select update file --> select your copied file.
I had to use OTG-USB cable and chose the MIUI 8 rom in TWRP 2.8.7.0
But from now due to unavailable /data, /cache / etc - internalt storage is 0 - the installation however started, but failed.
Begin:
http://kepfeltoltes.hu/160717/IMG_1604_www.kepfeltoltes.hu_.jpg
End:
http://kepfeltoltes.hu/160717/IMG_1605_www.kepfeltoltes.hu_.jpg
13. Phone will Reboot and install.
Negative.
Where do I make mistake?
Olympos.81 said:
I followed your instruction, please see my notes and check my pictures:
1. Copy the Repartition zip file to phone.
OK!
2. Copy the Philz recovery to your phone.
OK!
Please see it, I copied everything to my phone from Window 10, so these files copied into /data directory:
http://kepfeltoltes.hu/160717/factory_directory_www.kepfeltoltes.hu_.jpg
3. Install Philz recovery.
I did it from factory recovery:
http://kepfeltoltes.hu/160717/IMG_1596_www.kepfeltoltes.hu_.jpg
(You can not see the "Philz*.zip" file because of bad quality of picture, but belive me, it is.
4. Reboot into recovery
OK!
5. Install Re-partition zip (It will take several minutes - it needs to format the partitions)
I did it:
http://kepfeltoltes.hu/160717/IMG_1597_www.kepfeltoltes.hu_.jpg
6. if format is not running - reboot to recovery and manually format the partitions (System, Data, Cache). - DO NOT FORMAT other partitions.
6.a. - check to see where the SDCARD data directory is mounted(data or data), if it is the data - change it back to data in the philz recovery, otherwise - upgrades will not work in TWRP.
I did not need the format, because your Repartition.zip was installed successfully, and format was done by Repartition.zip as you requested:
Begin:
http://kepfeltoltes.hu/160717/IMG_1598_www.kepfeltoltes.hu_.jpg
End:
http://kepfeltoltes.hu/160717/IMG_1599_www.kepfeltoltes.hu_.jpg
7. using SP-Flash tools or another way, install the TWRP 2.8.7 recovery again.
Because of your Repartition procedure all files were deleted from /data directory so I had to upload TWRP 2.8.7.0 recovery from SP-Flash tool to mobile:
http://kepfeltoltes.hu/160717/Recovery_www.kepfeltoltes.hu_.jpg
8. Restore your backup.
(I do not know what is it...maybe I make a mistake here. I skiped this step.)
9. Boot the phone.
OK.
10. Copy the MIUI8 install file to phone.
Negative. There is no operation system, because Repartition.zip formatted /data and /system directory.
Furthermore, Internal storage is 0 from the Repartition.zip is completed.
http://kepfeltoltes.hu/160717/IMG_1603_www.kepfeltoltes.hu_.jpg
11. Click on the 3 dots
Negative.
12. Chose select update file --> select your copied file.
I had to use OTG-USB cable and chose the MIUI 8 rom in TWRP 2.8.7.0
But from now due to unavailable /data, /cache / etc - internalt storage is 0 - the installation however started, but failed.
Begin:
http://kepfeltoltes.hu/160717/IMG_1604_www.kepfeltoltes.hu_.jpg
End:
http://kepfeltoltes.hu/160717/IMG_1605_www.kepfeltoltes.hu_.jpg
13. Phone will Reboot and install.
Negative.
Where do I make mistake?
Click to expand...
Click to collapse
First you missed your previous MIUI backup...
but that is not the issue...
I would recommend formatting the /system, /data, /cache partitions - even though that it shoes success...
Then reboot recovery (to PHILZ)
Make sure your SDCARD mount is without the "0"...
Try to flash ROM using ADB sideload, in PHILZ touch...
if it doesn't work, try installing with TWRP 2.6.3 recovery.
I shared what I did on my phone and it worked...
If all the above fails - try installing EBR1, EBR2 from SP-Flash tool, then Recovery (Philz), Format cache, system, data, then install rom through PHILZ or TWRP...
Somebody could install this rom as Hellfreezover described?
---------- Post added at 09:23 PM ---------- Previous post was at 09:05 PM ----------
hellfreezover said:
First you missed your previous MIUI backup...
but that is not the issue...
I would recommend formatting the /system, /data, /cache partitions - even though that it shoes success...
Then reboot recovery (to PHILZ)
Make sure your SDCARD mount is without the "0"...
Try to flash ROM using ADB sideload, in PHILZ touch...
if it doesn't work, try installing with TWRP 2.6.3 recovery.
I shared what I did on my phone and it worked...
If all the above fails - try installing EBR1, EBR2 from SP-Flash tool, then Recovery (Philz), Format cache, system, data, then install rom through PHILZ or TWRP...
Click to expand...
Click to collapse
Dear Hellfreezover!
I am sure, that you are advanced or professional developer and you have more experience about mobiles and ROMS, but now, I think what you have written in instructions is different as you have done it in real life.
...or someting is wrong with ROMs.
So...
I tried to follow your instruction several times and when I have reached that point that there were no error message at the beginning of installation of ROM, finally, it was also unsucessfull:
- begining: http://kepfeltoltes.hu/160717/IMG_1592_www.kepfeltoltes.hu_.jpg
- ending: http://kepfeltoltes.hu/160717/IMG_1593_www.kepfeltoltes.hu_.jpg
(See, there is no error message as before like "unmount /data" or somthing else...)
I am hardly a professional....
I used philz, and my files the way I described...
There may be some issues, I had miui Rom installed before...
And there is another guy that did the repartition process... using SP flash tools...
You can try maybe replacing the EBR1, EBR2 in the original Rom and choose firmware update....
Then install the twrp recovery and the Rom...
hellfreezover said:
I am hardly a professional....
I used philz, and my files the way I described...
There may be some issues, I had miui Rom installed before...
And there is another guy that did the repartition process... using SP flash tools...
You can try maybe replacing the EBR1, EBR2 in the original Rom and choose firmware update....
Then install the twrp recovery and the Rom...
Click to expand...
Click to collapse
Now I tried again and again, I followed again your every intsructions and I tried the following ROMs with TWRP 2.6.3.0:
- xiaomi.eu_multi_TCL_S960_6.7.14_v8-4.4 (latest) - Failed
- xiaomi.eu_multi_TCL_S960_6.6.30_v8-4.4 (previous) - Failed
- xiaomi.eu_multi_TCL_S960_6.3.10_v7-4.4 - Success!
Now, the MIUI 7 is running.
I am trying to upgrade to latest MIUI 7 and after to MIUI 8....
...but I am afraid: this will be again failed.
Hi, here's a guide on how install crDroid 7.5 (A11) on Redmi 8
UPDATE: THERE'S 7.5 VERSION AVAIABLE, IF YOU ARE USING 7.4 FOLLOW THIS STEPS TO UPDATE WITHOUT LOSING DATA (NEW ROM IS IN MEGA FOLDER, ):
1- Reboot in recovery
2- Go to Wipe -> Avanced wipe -> wipe dalvik, cache and system
3- Go to Reboot -> Recovery
4- Now follow the normal guide from the flashing of the .img file as system image
VERY IMPORTANT: DON'T FORMAT DATA AFTER FLASHING GSI FIXER OR YOU WILL LOST ALL YOUR DATA
Features:
- All functions of the phone work (face unlock, fingerprint, voLTE, voWIFI, hotspot, bluetooth, fast charge, DT2W, ...)
- Magisk safetynet passed without flash nothing (screenshot at the bottom)
- Permissive Selinux by default (in settings is writing disabled, it's wrong) but you can switch to enforcing with
SelinuxModeChanger app, apk at the bottom
What doesn't work
- Nothing if you use fixes below
Note 1: You may have problems with the brightness or sim calls/sms, there are solutions:
- For brightness: Open settings -> Go in "Phh Treble Settings" -> "Misc Features" -> Scroll until you are in backlight menu -> Select "Force alternative backlight scale" and "Enable auto-brightness overlay" -> then deselect both and reboot
- For sim calls: Open settings -> Go in "Network and internet" -> "Mobile network" -> Tap on "Preferred network type" and select "GSM/WCDMA/LTE" or "Global" (try which is better for you) and then reboot
Note 2: If you fing bugs tell me in comments, maybe I could help you (I'm not the developer of the rom)
IMPORTANT ADVICE:I am not responsible for any damage caused to your device by not following the steps, all the steps were tested on my personal device and are confirmed, my device is Redmi 8 4/64
Installation Steps - All the files you need are HERE
Note 3: I did the installation coming from Mui 12.0.1 stock (flashed in fastboot with Mi Flash) and there was no problem in the installation process or in the boot process, YOU NEED THIS ROM IF YOU WON'T PROBLEMS
1- First make a backup of all the necessary information in case something goes wrong you can easily recover, Charge the battery at least 80%
All your data will be deleted during the process
2- Unlock the Bootloader if you have not already done it or do not know how to, follow this post: http://en.miui.com/unlock/
3- Before continue following steps estract on pc "crdrom-v302-210315-arm64-bvZ.img" from "crdrom-v302-210315-arm64-bvZ.img.xz" and activate USB debug in phone settings
4- Reboot in fastboot and connect the phone to the pc with cable
5- Install on pc minimal adb tool (zip at the bottom), flash the TWRP recovery typing " fastboot flash recovery ", now drag twrp file near the command, then vbmeta typing " fastboot --disable-verity --disable-verification flash vbmeta " and drag vbmeta file near the command. Finished the procedure type " fastboot reboot " and hold volume + on the phone until you see the recovery screen
6- Scroll on the slider at the bottom of the phone screen to access in the TWRP
7- Go to Wipe -> Format data -> type "yes"
8- Go to Reboot -> Recovery
9- Go to Wipe -> Avanced wipe -> wipe dalvik, data, cache and system
10- Go to Reboot -> Recovery
NOW YOU HAVE TO TRANSFER ALL OTHER FILES OR IN THE INTERNAL STORAGE OF THE PHONE OR IN SD/USB WITH OTG CABLE
11- Go to Install -> Select the storage where you have files -> Install img -> select "crdrom-v306-210425-arm64-bvZ.img" (Extracted from the .xz file) -> select "system image" and flash
12- Wait and then go to Reboot -> Recovery
13- Wipe -> Advanced wipe -> select "system" and click on "Repair or change file system" -> Resize system
14- Wait and then go to Reboot -> Recovery
15- Install -> Select the storage where you have files -> Flash "GSI-BUGS-FIXER_11_Q.zip"
16- Wipe -> Format data -> type "yes"
17- Wait and then go to Reboot -> Recovery
18- Install -> Select the storage where you have files -> Flash "BiTGApps-arm64-11.0.0-R19_signed.zip"
19- Wait and then go to Reboot -> System
20- Configure phone and enjoy your new rom
Note 4: I reccomend you to flash magisk after you have configured the rom to avoid problems, I leave you the zip to flash in recovery below
Note 5: I reccomend you the best gcam I've found for Redmi 8, everything works except slow motion, link HERE
Thanks for the attenction
-Estatè
Happy that many GSI roms are under develment. I hope this phone will die due to hardware, as there are lots of options in future to keep the software updated.
Anyway, if someone intends to try, following is the link of all GSI Roms.
Generic System Image (GSI) list
Notes about tinkering with Android Project Treble. Contribute to phhusson/treble_experimentations development by creating an account on GitHub.
github.com
Can i flash vbmeta through recovery
Naulels said:
Can i flash vbmeta through recovery
Click to expand...
Click to collapse
Hey
I'm not using crDroid yet, but I've already installed TWRP.
It is advertised that you should flash vbmeta when you're installing TWRP.
I hope I can help you
Hey !
I wanna try this but I have rooted my phone so here is my question : do I need to remove the root to install this GSI ?
Thx a lot
Volume doesn't work correctly, I cannot increase or decrease the volume. And I plugged my headphone not play through headphone, it play through speaker. Sorry my English
Naulels said:
Can i flash vbmeta through recovery
Click to expand...
Click to collapse
No, you have to flash it with ADB like twrp
letouvetpierre said:
Hey !
I wanna try this but I have rooted my phone so here is my question : do I need to remove the root to install this GSI ?
Thx a lot
Click to expand...
Click to collapse
I recommend you to remove it from the magisk app to avoid problems but I think that would be the same
Naulels said:
Volume doesn't work correctly, I cannot increase or decrease the volume. And I plugged my headphone not play through headphone, it play through speaker. Sorry my English
Click to expand...
Click to collapse
I haven't this problem, have you flashed the gsi fixer? Did you start the installation from miui 12.0.1? It's really important, anyway, you can try to do again the procedure
Does VoLTE and VoWIFI works ? It's a GSI so I'm not thinking it works...
letouvetpierre said:
Does VoLTE and VoWIFI works ? It's a GSI so I'm not thinking it works...
Click to expand...
Click to collapse
Yes, all work fine becouse you flash the gsi fixer for gsi roms on redmi 8
Estatè Mosconi said:
I haven't this problem, have you flashed the gsi fixer? Did you start the installation from miui 12.0.1? It's really important, anyway, you can try to do again the procedure
Click to expand...
Click to collapse
I have reinstalled and fixed it, thanks
Hey !
I'm so happy !
Everything works on that GSI rom, but I haven't the certification on SafetyNet.
With the covid-tracing app, there is a little problem but it's with all the custom roms so...
Thanks a lot for your guide !
letouvetpierre said:
Hey !
I'm so happy !
Everything works on that GSI rom, but I haven't the certification on SafetyNet.
With the covid-tracing app, there is a little problem but it's with all the custom roms so...
Thanks a lot for your guide !
Click to expand...
Click to collapse
Hi, I'm happy for you, for safetynet try the magisk module, I didn't have this problem, anyway, try the rom and than leave a feedback, it could be useful for other people who want to try this rom
I can't get this rom to work correctly. Did the steps as described, but it has SELinux not enforced and Google play isn't certified. Tried multiple times.
EDIT: seems my phone is soft bricked now (Can't install any rom). Going back to xaomi stock to try again.
I tried again and got it to work. The certificate patch throws an error but Google apps are working.
I get an SE Linux not enforcing error. though.
Is there anything I can do about that?
I lost the treble-overlay-xiaomi-redmi8.apk file ,I should problems with the brightness
ndduc said:
I lost the treble-overlay-xiaomi-redmi8.apk file ,I should problems with the brightness
Click to expand...
Click to collapse
There is the solution for brightness in the guide, you don't need that file
Estatè Mosconi said:
There is the solution for brightness in the guide, you don't need that file
Click to expand...
Click to collapse
thanks you, i fixed
ndduc said:
thanks you, i fixed
Click to expand...
Click to collapse
Ok good