Database Develop

[Q] After root, only charges when off.

Hi there,
Rooted my phone yesterday, downgraded from HBoot 2.00 to 1.13 using Nonverbose's script and then used Revolutionary to get S-OFF and then finally flashed Virtuous Quattro RC3 as well as the latest Tiamat kernel.
Works fine, just the phone won't charge if it's switched on. I have to power off for it to charge at all.
I know it's not a ROM problem, because I've tried both Quattro and IceColdSandwich, and neither will charge, and I'm quite sure it's not the cable, as it obviously works when powered off. I have also tried two other cables and one wall charger.
I've tried reflashing the kernel, doing Davlik cache wipes etc. Also checked the battery for bent pins, and it seems fine.
Is there any diagnostic check I can run to see if the battery is faulty etc? Or something I forgot while rooting/flashing?
Thanks in advance,
Larry

larryorsomething said:
Hi there,
Rooted my phone yesterday, downgraded from HBoot 2.00 to 1.13 using Nonverbose's script and then used Revolutionary to get S-OFF and then finally flashed Virtuous Quattro RC3 as well as the latest Tiamat kernel.
Works fine, just the phone won't charge if it's switched on. I have to power off for it to charge at all.
I know it's not a ROM problem, because I've tried both Quattro and IceColdSandwich, and neither will charge, and I'm quite sure it's not the cable, as it obviously works when powered off. I have also tried two other cables and one wall charger.
I've tried reflashing the kernel, doing Davlik cache wipes etc. Also checked the battery for bent pins, and it seems fine.
Is there any diagnostic check I can run to see if the battery is faulty etc? Or something I forgot while rooting/flashing?
Thanks in advance,
Larry
Click to expand...
Click to collapse
Ics roms are always bit laggy atm. Quattro isn't made to use with tiamat. Icecoldsandwich 7 dont needs tiamat cause the stock kernel ist better optimized for it. Try a stock sense, miui or cm7 rom. If this doesn't suit too i think your usb port is in yhe ansroid heaven.
Sent from my HTC Incredible S using xda premium

Silversniper said:
Ics roms are always bit laggy atm. Quattro isn't made to use with tiamat. Icecoldsandwich 7 dont needs tiamat cause the stock kernel ist better optimized for it. Try a stock sense, miui or cm7 rom. If this doesn't suit too i think your usb port is in yhe ansroid heaven.
Sent from my HTC Incredible S using xda premium
Click to expand...
Click to collapse
Okay, I'm going to install CM 7.2 RC1 today. When I flash the ROM, do I have to flash another kernel or will Tiamat get lost automatically? Where can I find a download for the stock kernel?
Thanks!

Stock kernel will be included within the rom anyway. So don't worry.
Sent from my Incredible S using xda premium

You can transfer files while connected via USB?

I installed CM 7.2 by loading it onto the MicroSD card via a cardreader, because I couldn't get my phone to mount storage on my PC (I kept getting the 'device malfunctioned' message). I can't find the setting to enable disk drive mode, or battery info, can anyone help with this?
Actually, I've got it on now, and I just saw it go from 'Charging (9%)' to 'Charging (8%)', the same as the other roms.
I guess it's the microUSB port?

larryorsomething said:
I installed CM 7.2 by loading it onto the MicroSD card via a cardreader, because I couldn't get my phone to mount storage on my PC (I kept getting the 'device malfunctioned' message). I can't find the setting to enable disk drive mode, or battery info, can anyone help with this?
Actually, I've got it on now, and I just saw it go from 'Charging (9%)' to 'Charging (8%)', the same as the other roms.
I guess it's the microUSB port?
Click to expand...
Click to collapse
Do you use your device while charging? Sometimes is the Usb Output lower than the used power. Have you disabled wifi/data/wlan and do on while charging? You have to press in the notification bar on the Usb. Notifications and select usb drive
Sent from my HTC Incredible S using xda premium

By way of some miracle, USB mass storage and debugging are working now. Should I try to unroot to get back to S-ON for warranty, assuming it's the microUSB port?
Oh, and I just saw it go from Charging 11% to 12%, so I guess it's charging. I'm afraid to touch it though, guessing the port's really fragile.

larryorsomething said:
By way of some miracle, USB mass storage and debugging are working now. Should I try to unroot to get back to S-ON for warranty, assuming it's the microUSB port?
Oh, and I just saw it go from Charging 11% to 12%, so I guess it's charging. I'm afraid to touch it though, guessing the port's really fragile.
Click to expand...
Click to collapse
If you unlocked it via Htcdev idk if you revert the warranty back because they safed the Toked from you device. If you riitrd ir without any token or so, i would revert it
Sent from my HTC Incredible S using xda premium

I didn't use htcdev, just Revolutionary? (not sure if they do the same thing, sorry)

larryorsomething said:
I didn't use htcdev, just Revolutionary? (not sure if they do the same thing, sorry)
Click to expand...
Click to collapse
They don't
You can get it Back to S On
Sent from my HTC Incredible S using xda premium

Uhh so I'm trying to follow this guide to get back to S-ON, but it requires ADB and USB debugging. After flashing the stock rom back on, I can't seem to get debugging to work again. The USB icon is in the status bar so I know it's charging, but there should be a notification for debugging mode, right?
I'm assuming it's not possible to put the files on the microSD card and then flash the HBOOT on the device itself? (maybe I should post about this in the guide's thread)
EDIT: I should also note that despite being able to set it to disk drive mode, I'm still getting the 'device malfunctioned' message on my PC, so I can't directly transfer files to the SD. I guess that's why debugging isn't working.

larryorsomething said:
Uhh so I'm trying to follow this guide to get back to S-ON, but it requires ADB and USB debugging. After flashing the stock rom back on, I can't seem to get debugging to work again. The USB icon is in the status bar so I know it's charging, but there should be a notification for debugging mode, right?
I'm assuming it's not possible to put the files on the microSD card and then flash the HBOOT on the device itself? (maybe I should post about this in the guide's thread)
EDIT: I should also note that despite being able to set it to disk drive mode, I'm still getting the 'device malfunctioned' message on my PC, so I can't directly transfer files to the SD. I guess that's why debugging isn't working.
Click to expand...
Click to collapse
Have you ever installed HTC Sync or the HTC USB drivers on your PC? Those are the key to getting adb and fastboot working.

tpbklake said:
Have you ever installed HTC Sync or the HTC USB drivers on your PC? Those are the key to getting adb and fastboot working.
Click to expand...
Click to collapse
Yes, I have HTC Sync installed. I also installed the ADB/fastboot files from here, just to be sure. I don't think that would be the problem anyway, since not even Windows is recognizing it.

larryorsomething said:
Yes, I have HTC Sync installed. I also installed the ADB/fastboot files from here, just to be sure. I don't think that would be the problem anyway, since not even Windows is recognizing it.
Click to expand...
Click to collapse
Have you tried another sdcard? This might be a corrupt misc.img. When you used my script, did you have any issues with gold card creation, or have you messed with the Cid in any other way? The script should have made a backup of your original misc partition so it shouldn't be too hard to flash it back, but first you should try flashing another rom, tpbklakes stock rooted rom would be a good one to try unless you have a stock nandroid on your sdcard.
Btw, what recovery are you using? Please include version number.

Nonverbose said:
Have you tried another sdcard? This might be a corrupt misc.img. When you used my script, did you have any issues with gold card creation, or have you messed with the Cid in any other way? The script should have made a backup of your original misc partition so it shouldn't be too hard to flash it back, but first you should try flashing another rom, tpbklakes stock rooted rom would be a good one to try unless you have a stock nandroid on your sdcard.
Btw, what recovery are you using? Please include version number.
Click to expand...
Click to collapse
Sorry, I flashed the stock ROM right before you posted this. I just tried putting in another SD card and it's getting the same error. I'm sure it's the USB port at this port, seeing how I have to position the cable to get it to charge at all, and it's getting harder and harder to position. I'm just hoping for a way to flash the HBOOT on the device at this point.
I think I was using Recovery 5.0.3.0? I installed it from ClockworkMod's Rom Manager. And I didn't mess with the Cid at all, or have problems with the goldcard creation.

larryorsomething said:
Sorry, I flashed the stock ROM right before you posted this. I just tried putting in another SD card and it's getting the same error. I'm sure it's the USB port at this port, seeing how I have to position the cable to get it to charge at all, and it's getting harder and harder to position. I'm just hoping for a way to flash the HBOOT on the device at this point.
I think I was using Recovery 5.0.3.0? I installed it from ClockworkMod's Rom Manager. And I didn't mess with the Cid at all, or have problems with the goldcard creation.
Click to expand...
Click to collapse
Ah well yeah, if you have to physically manipulate the USB cord to get it to charge then its a hardware issue. Warranty will take care of that.
So you're back to s-on, no issues?

Nonverbose said:
Ah well yeah, if you have to physically manipulate the USB cord to get it to charge then its a hardware issue. Warranty will take care of that.
So you're back to s-on, no issues?
Click to expand...
Click to collapse
Well, not yet! I have stock rom working fine, but when I load up the bootloader, it still says Revolutionary, S-OFF. So I'm trying to get it to say FASTBOOT USB while bending the cable around and round etc. It's only flashing to USB a couple of times, and then it says USB Device not recognized on my PC, so I guess it won't work anyway if I get the cable in properly.

larryorsomething said:
Well, not yet! I have stock rom working fine, but when I load up the bootloader, it still says Revolutionary, S-OFF. So I'm trying to get it to say FASTBOOT USB while bending the cable around and round etc. It's only flashing to USB a couple of times, and then it says USB Device not recognized on my PC, so I guess it won't work anyway if I get the cable in properly.
Click to expand...
Click to collapse
To use Fastboot USB mode, the phone should be in Charge Mode, Not Disk Drive mode.

tpbklake said:
To use Fastboot USB mode, the phone should be in Charge Mode, Not Disk Drive mode.
Click to expand...
Click to collapse
I'm having trouble even getting the option to change that now, but shouldn't I be in the bootloader if I want to be using fastboot?
Also, I should probably specify that this is the stock ROM I flashed:
http://www.filefactory.com/file/c0a...5AU_3805.04.03.12_M_release_185029_signed.exe

[Q] My htc one not accessible in fastboot mode

In order to find my cidnum..I did all the procedures..But when I type the fastboot command in the cmd. It stays "Waiting for device" only..But my device is not detected(my phone was in the fastboot mode)..I can see a notification in my pc that the usb is not recognized.I installed the latest sync manager that came with the phone and its of course up-to-date..I see no problem with my procedure...Did I miss something or do I have to do something else??help someone!!!

Neo_92 said:
In order to find my cidnum..I did all the procedures..But when I type the fastboot command in the cmd. It stays "Waiting for device" only..But my device is not detected(my phone was in the fastboot mode)..I can see a notification in my pc that the usb is not recognized.I installed the latest sync manager that came with the phone and its of course up-to-date..I see no problem with my procedure...Did I miss something or do I have to do something else??help someone!!!
Click to expand...
Click to collapse
1. You need to be on the bootloader screen for fastboot to work
2.try uninstalling HTC sync and try again

didn't help
I m running the windows 8.1 preview version..is that a problem??

Neo_92 said:
didn't help
I m running the windows 8.1 preview version..is that a problem??
Click to expand...
Click to collapse
Yes, drivers don't work in 8.1 yet

EddyOS said:
Yes, drivers don't work in 8.1 yet
Click to expand...
Click to collapse
Now i m in ubuntu 13.04..I m pretty sure there is no driver issues in this os..But stuck with the same problem..I can boot in to bootloader menu by using adb reboot-bootloader..But in bootloader when I type fastboot getvar cid,it stucks here "waiting for device"..I m dying to know my htc one's cid..Please help..Do I have to unlock the bootloader??(Sorry if the question was dumb)

I know how to solve this problem! Your HTC One will not work with USB2 port! connect it to the USB3 and youre done... will work even with win8.1 [MAYBE]

Rocker19943 said:
I know how to solve this problem! Your HTC One will not work with USB2 port! connect it to the USB3 and youre done... will work even with win8.1 [MAYBE]
Click to expand...
Click to collapse
I don't even know how does this make sense. I use USB 2.0 port all the time to connect my One to the PC and got no problem with that.
Sent via my HTC One™

MrKudinGTO said:
I don't even know how does this make sense. I use USB 2.0 port all the time to connect my One to the PC and got no problem with that.
Sent via my HTC One™
Click to expand...
Click to collapse
Mine doesnt work with usb2... Only usb3
Sent from my HTC One using xda premium

My laptop only has USB 3.0 ports. I could get HTC sync to work fine, but the PC wouldn't recognize the phone when in the bootloader. I was struggling to find an answer until I came across this blog and this worked flawlessly. The problem is with the Microsoft USB 3 host controller. This method replaces 2 Microsoft drivers with Intel drivers.
http://plugable.com/2012/12/01/windows-8-and-intel-usb-3-0-host-controllers
Follow this to a T. It does require rebooting the PC to disable driver signing, so make sure you bookmark the link to go back to it after you rebooted. If this helps you, just press the thanks button!
Sent from my HTC One using xda premium

born_fisherman said:
My laptop only has USB 3.0 ports. I could get HTC sync to work fine, but the PC wouldn't recognize the phone when in the bootloader. I was struggling to find an answer until I came across this blog and this worked flawlessly. The problem is with the Microsoft USB 3 host controller. This method replaces 2 Microsoft drivers with Intel drivers.
http://plugable.com/2012/12/01/windows-8-and-intel-usb-3-0-host-controllers
Follow this to a T. It does require rebooting the PC to disable driver signing, so make sure you bookmark the link to go back to it after you rebooted. If this helps you, just press the thanks button!
Sent from my HTC One using xda premium
Click to expand...
Click to collapse
I guess U r right..But sadly all the USB ports in my laptop are Usb 2.0..lost all hope

Neo_92 said:
I guess U r right..But sadly all the USB ports in my laptop are Usb 2.0..lost all hope
Click to expand...
Click to collapse
Did you click on fastboot in bootloader?

a box of kittens said:
Did you click on fastboot in bootloader?
Click to expand...
Click to collapse
of course I did click the fastboot in the bootloader.But I really cant believe that the fastboot mode of htc one works only on USB 3.0 port..because the access to the internal storage of the phone is flawless with usb 2.0 port

Neo_92 said:
of course I did click the fastboot in the bootloader.But I really cant believe that the fastboot mode of htc one works only on USB 3.0 port..because the access to the internal storage of the phone is flawless with usb 2.0 port
Click to expand...
Click to collapse
Actually it's the other way around. Fastboot plays nicer with USB 2.0.
Sent from my HTC One using xda premium

[Q] Rooting w/o USB connection

Hi, guys! I have a really big problem :/. Right now I'm using the stock 2.3.4 gingerbread from LG ,but you all know that this is the worst OS ever. I wanted to get rid of it but i cant connect my device to the computer. It's only charging. I need a way to root it w/o usb connection. Do u have any suggestions? It's not a software problem! Something inside the phone is broken and i don't know what it is. Is there a way to root it via bluetooth or SD card? I didn't find any apps to root it too. I know gingerbreak etc, but they dont work for 2.3.4. Thank you in advance and i hope there is a solution. :fingers-crossed:

I am afraid you can't. Replacing your micro usb port could solve your problem. I reccomend to buy a micro usb port which is already on the flexible cable so you can avoid ironing.
Sent from my LG-P990 using xda app-developers app

So i'll need this? I asked a staff member in a service station and he said that the port isnt broken. So i need the whole thing port+flexible cable? Is that what i should do? Thanks alot. Ohh man i cant post links still: http:___//i.ebayimg.com/t/LG-G2X-Optimus-2X-P990-P999-Micro-USB-Charging-Port-Flex-Cable-Repair-Part-/00/s/OTU1WDE0MDI=/z/unUAAOxy9DRSAoTf/$T2eC16R,!wsE9suwycosBS!oTe7+VQ~~60_57.JPG

stupid question: did you try another usb cable or usb port?

Yeah, dude. Of course. I've tried different settings like usb debugging on/off too but still nothing.

here are some articles you might want to check out regarding usb connection
http://www.birdiesync.com/my-android-device-cannot-connect-over-usb
http://www.droidxforums.com/forum/chevyno1/31975-usb-charge-only-ssx.html (2nd post reply)
i forgot how the mass storage settings in gingerbread look like but there should be an option to put the phone in "charge only" mode (which you should disable)... pressing menu key in settings > storage doesn't give you any options to choose?

In gingerbread you can only turn usb mass storage and usb debugging on/off. These settings didn't help. I'll read more about the first link you gave me and try it out.

peetyo040497 said:
In gingerbread you can only turn usb mass storage and usb debugging on/off. These settings didn't help. I'll read more about the first link you gave me and try it out.
Click to expand...
Click to collapse
This is quite challenge, root without usb connection. First idea I got to use ADB over WiFi, but this is available from ICS, not on GB.
Second idea - what I remember, some of root methods use APK installation over ADB by script. Maybe you can search for these script methods and place all required files on SD Card. Then try to execute commands by terminal on device itself to install and root.
It's just my idea, maybe wrong, maybe help.

peetyo040497 said:
So i'll need this? I asked a staff member in a service station and he said that the port isnt broken. So i need the whole thing port+flexible cable? Is that what i should do? Thanks alot. Ohh man i cant post links still: http:___//i.ebayimg.com/t/LG-G2X-Optimus-2X-P990-P999-Micro-USB-Charging-Port-Flex-Cable-Repair-Part-/00/s/OTU1WDE0MDI=/z/unUAAOxy9DRSAoTf/$T2eC16R,!wsE9suwycosBS!oTe7+VQ~~60_57.JPG
Click to expand...
Click to collapse
Yes that is what you need if you have to replace your USB port but you don't have skills to replace only the usb port.
You can try gingerbreak to root your phone, but it maybe won't work.

bitdomo said:
Yes that is what you need if you have to replace your USB port but you don't have skills to replace only the usb port.
You can try gingerbreak to root your phone, but it maybe won't work.
Click to expand...
Click to collapse
Gingerbreak works on devices with android 2.3.3 and lower. Anyways I've tried it but it didn't work.

p.valenta said:
This is quite challenge, root without usb connection. First idea I got to use ADB over WiFi, but this is available from ICS, not on GB.
Second idea - what I remember, some of root methods use APK installation over ADB by script. Maybe you can search for these script methods and place all required files on SD Card. Then try to execute commands by terminal on device itself to install and root.
It's just my idea, maybe wrong, maybe help.
Click to expand...
Click to collapse
I'm not aware of ADB and scripting. Can you give me sоme guidelines?(I'm sorry 'bout my english. I hope you understand)
p.s. I found some info about ADB. So you need ADB to control your device via commands, but you can use ADB on your computer? You say that i have to find a way to use ADB on my phone so it controls itself and roots?

peetyo040497 said:
I'm not aware of ADB and scripting. Can you give me sоme guidelines?(I'm sorry 'bout my english. I hope you understand)
p.s. I found some info about ADB. So you need ADB to control your device via commands, but you can use ADB on your computer? You say that i have to find a way to use ADB on my phone so it controls itself and roots?
Click to expand...
Click to collapse
sorry to hear about your problems but just a simple question here have u tried another computer ? i had this problem with my nexus when i connect it to the pc i couldn't transfer my stuff to it but adb worked, but when i took it to another computer both mtp and adb worked

Yes, I've tried another pc's port and it didnt find my device too. My issue isn't the same i mean that my computer doesn' recognize the phone. There are no messeges that appear on the device or computer.

peetyo040497 said:
Yes, I've tried another pc's port and it didnt find my device too. My issue isn't the same i mean that my computer doesn' recognize the phone. There are no messeges that appear on the device or computer.
Click to expand...
Click to collapse
peetyo maybe your cable isn't good and did you try to install lg drivers?
check also by device manager or computer management or a device is appeared
Sent from my LG-P990 using xda app-developers app

winstonxl2 said:
peetyo maybe your cable isn't good and did you try to install lg drivers?
check also by device manager or computer management or a device is appeared
Sent from my LG-P990 using xda app-developers app
Click to expand...
Click to collapse
Guys, the problem is not in the computer nor in the cable, it's in the phone. I'm 99% sure that it's a hardware problem. So i need to find a way to root or flash it without using usb connection.

i'm somehow sure that the real problem here is the device driver installation on your PC/Windows, not the phone...
btw which windows version are you using?
did you try checking out the AIO tool thread?
http://forum.xda-developers.com/showthread.php?t=2020737

60nine said:
i'm somehow sure that the real problem here is the device driver installation on your PC/Windows, not the phone...
btw which windows version are you using?
did you try checking out the AIO tool thread?
http://forum.xda-developers.com/showthread.php?t=2020737
Click to expand...
Click to collapse
Win 8 currently.
How would this thread help me?
I'll try installing the drivers on this laptop cause i''ve tried before on a one with xp.
P.s. With the drivers reinstalled on win 8 it doesnt work. As i said i've tried different computers, different cables and different setting.

peetyo040497 said:
Win 8 currently.
How would this thread help me?
I'll try installing the drivers on this laptop cause i''ve tried before on a one with xp.
P.s. With the drivers reinstalled on win 8 it doesnt work. As i said i've tried different computers, different cables and different setting.
Click to expand...
Click to collapse
if you read the 1st post, you might find out how could it help you... especially if you use win 8 which caused problems for many other users when trying to install the drivers or trying to flash the phone...
I - Install APX (NVFlash Recovery) Drivers if not already installed.
It starts the windows device driver wizard to help you install the drivers needed for NVFlash. It detects your system OS and gives additional on-screen instructions needed if your PC is running Windows 8.
FYI: The drivers are located under ToolKitFiles\nvflash\driver folder.
Click to expand...
Click to collapse

60nine said:
if you read the 1st post, you might find out how could it help you... especially if you use win 8 which caused problems for many other users when trying to install the drivers or trying to flash the phone...
Click to expand...
Click to collapse
I use windows 8 from a week. Anything i've done before was on a xp/ win 7. The problem isnt in the win 8 i use now. I've tried everything on my xp laptop. I have a friend who has the same phone and he can connect it to his computer so everything is fine with his computer. I've tried to connect my optimus to his computer and again it wasnt found by the computer. The problem must be in my device.
I'll try installing the APX drivers.

peetyo040497 said:
I use windows 8 from a week. Anything i've done before was on a xp/ win 7. The problem isnt in the win 8 i use now. I've tried everything on my xp laptop. I have a friend who has the same phone and he can connect it to his computer so everything is fine with his computer. I've tried to connect my optimus to his computer and again it wasnt found by the computer. The problem must be in my device.
I'll try installing the APX drivers.
Click to expand...
Click to collapse
u said that u wanted to get rid of the lg gingerbread software, and for that u dont really need to root, u could use the all in one toolkit and flash the new unlocked bootloader with cwm or twrp and install the new bootloader rom u want its as easy as that

ADB issues. Hangs on < waiting for device >

So I'm trying to flash the Google Play Edition RUU on my device. I have S-Off. When I try to read my CID, it says < waiting for device > and gets no further. I completely deleted my sdk and reinstalled it because I had read sometime this would be caused by needing to update your sdk. It does the same thing when I try to writecid. Does anyone know why it would hang like this when trying to read or write my CID. I'm running ARHD 13.3 with TWRP (don't know what version number) if that would have anything to do with this.
EDIT: Something else I noticed that may or may not be relevant. When I reboot into the bootloader, my computer says device not recognized.

Try using this guide.
Seems you don't have the driver installed.
However, did you try fastboot command in fastboot?

To use fastboot you need to
Fastboot reboot-bootloader
To use adb you need to be in recovery or live in the os.
Sent from my HTC One using Tapatalk 4

Guich said:
Try using this guide.
Seems you don't have the driver installed.
However, did you try fastboot command in fastboot?
Click to expand...
Click to collapse
I tried what that guide said prior to posting this thread. However, upon re-reading it, I think I have discovered my issue. My laptop only has USB 3.0 ports, and they said they could not get it to work over USB 3.0. I will set up the SDK on my wife's computer and use a USB 2.0 port and see if that resolves the issue. I'll investigate to see if what I'm trying to accomplish can be done on ChromeOS too, cause I'd rather use my Chromebook than take over my wife's computer.
xcrazydx said:
To use fastboot you need to
Fastboot reboot-bootloader
To use adb you need to be in recovery or live in the os.
Sent from my HTC One using Tapatalk 4
Click to expand...
Click to collapse
That is what I thought, but I was trying other things since I was having issues.

JRDroid said:
I tried what that guide said prior to posting this thread. However, upon re-reading it, I think I have discovered my issue. My laptop only has USB 3.0 ports, and they said they could not get it to work over USB 3.0. I will set up the SDK on my wife's computer and use a USB 2.0 port and see if that resolves the issue. I'll investigate to see if what I'm trying to accomplish can be done on ChromeOS too, cause I'd rather use my Chromebook than take over my wife's computer.
That is what I thought, but I was trying other things since I was having issues.
Click to expand...
Click to collapse
To use ADB with USB 3.0 ports, follow this guide first. Once you finish reinstalling your usb 3.0 drivers with this guide ABD will work properly! :good:

HiddenSanctum said:
To use ADB with USB 3.0 ports, follow this guide first. Once you finish reinstalling your usb 3.0 drivers with this guide ABD will work properly! :good:
Click to expand...
Click to collapse
Trying this as soon as I get home from work! If this gets things working for me I will gladly be dolling out thanks!

JRDroid said:
Trying this as soon as I get home from work! If this gets things working for me I will gladly be dolling out thanks!
Click to expand...
Click to collapse
It worked for my ultrabook that only had two usb 3.0!

HiddenSanctum said:
It worked for my ultrabook that only had two usb 3.0!
Click to expand...
Click to collapse
Yeah, I've got an Asus G75VX. Four USB 3.0 ports and a Thunderbolt port, but if I have a device that doesn't play nicely with them I'm SOL.

Thanks everyone for your help! My phone now thinks its a Google Play Edition!

HiddenSanctum said:
To use ADB with USB 3.0 ports, follow this guide first. Once you finish reinstalling your usb 3.0 drivers with this guide ABD will work properly! :good:
Click to expand...
Click to collapse
Hi, Yes of course, its a great guide and i did excatly whay they said to my laptop, and i could make it work only for a few minutes, after that the system freezed ( i.e no applications were opening and the system couldn't perform any operation other than right click and left click, couldn't turn off the system even and couldn't open the task manager too ) ,luckily before the system freezed, i quickly changed the kernel of my phone. Then I had no other go other than reverting the USB settings to Microsoft driver.
JRDroid said:
Thanks everyone for your help! My phone now thinks its a Google Play Edition!
Click to expand...
Click to collapse
Did you succeed in this ? If so could you please help me, because even I am having the same laptop GV75VX. Thank you

[Q] HTC One can't be read by computer

I have the International non-developer version and it came with the stock ROM with Sense 5. I rooted it and installed Google's 4.2.2 stock ROM, but when the 4.3 version came out I updated it via OTA (I know I shouldn't have done that, but I guess what's done is done). After the update, whenever I plug in my phone it still shows up but when I open it there's nothing in it no matter how many times I refresh it. Also, when I try to use Nandroid Manager it says that my phone is not rooted.
Now I also can't use adb and fastboot as they both say there is no phone plugged in when it is actually plugged in. How do I solve this? Any help would be appreciated
Btw, I have the drivers for the phone installed along with HTC Sync Manager.

Enable the USB debugging in the Developer settings > that enables ADB
I assume you know, that you need to tap on the build number 7 times to let the developer menu pop up
Since 4.3 there is multiuser, you must move your data with a file manager from data/user to data/user/0

davebugyi said:
Enable the USB debugging in the Developer settings > that enables ADB
I assume you know, that you need to tap on the build number 7 times to let the developer menu pop up
Since 4.3 there is multiuser, you must move your data with a file manager from data/user to data/user/0
Click to expand...
Click to collapse
Well I didn't know about the developer menu thing ._. I thought there was no developer settings for the ROM.
Anyway, I did what you said but adb/fastboot still can't detect it.

ickytc said:
Well I didn't know about the developer menu thing ._. I thought there was no developer settings for the ROM.
Anyway, I did what you said but adb/fastboot still can't detect it.
Click to expand...
Click to collapse
That is strange...
It wont recognize from fastboot either?

davebugyi said:
That is strange...
It wont recognize from fastboot either?
Click to expand...
Click to collapse
Exactly ._. Anyway to solve this?

Could it be due to different pc configuration or a faulty cable ?
I myself have a couple knock-off cables with them i usually have
To remove and resert a couple times before a big file gets transfered

alay_ said:
Could it be due to different pc configuration or a faulty cable ?
I myself have a couple knock-off cables with them i usually have
To remove and resert a couple times before a big file gets transfered
Click to expand...
Click to collapse
I've tried multiple devices and cables.

ickytc said:
I've tried multiple devices and cables.
Click to expand...
Click to collapse
If that case try a different pc / laptop, then ull at leadt be sure whether its the pc/ laptop or the mobile device which is causing troubles ...

alay_ said:
If that case try a different pc / laptop, then ull at leadt be sure whether its the pc/ laptop or the mobile device which is causing troubles ...
Click to expand...
Click to collapse
I meant to say I tried different PCs

Okay now fastboot detects the phone but adb still doesn't detect it. Help anyone?

Try flashing a new recovery. fastboot flash recovery recovery.img
Sent from my HTC One using Tapatalk
---------- Post added at 05:30 PM ---------- Previous post was at 05:29 PM ----------
The phone has to be booted into the os for adb to work. Fastboot only until you get a rom flashed.
Sent from my HTC One using Tapatalk