Database Develop

***paragon rc5.1 stuck in desperate need of help!

This was supposed to be a pm to espyel developer of paragon rom. Sorry if I misspelled name.
I can't seem to pm or post on developer section cause im new here and threes a 10 post rule. I have searched for the last month and im just stuck. I need help! I have only my captivate I internet with a barely usable weak signal so its been very frustrating. I have learned a lot from this great forum but I can't get my problem fixed still.
Here is my copy of the pm which never goes thru for some weird reason. I just need some guidance as I have probably not done this right all the way thru.
First of all I want to thank you for all your hard work on this rom. I love it! I am in need of some help and I have been researching for the past 3 weeks with no answers. Im pretty new to all this stuff but anyways let me tell you my status as of now. I rooted my phone and was able to install the 5.1 paragon rom which I like a lot. I lost some apps due to tb not able to restore my quickoffice and other important apps. My problem is I can't seem to flash back to anything other than the paragon 5.1 install date. I have the rom manager flashed to recover other dates like when the phone was still stock version but nothing else works. It always fails! I tried installing the update rc6 and something is very wrong. After installed and rebooted phone stays on for nearly 5 minutes and reboots randomly also I try restoring apps and it doesn't work. Seems very laggy and I know from all the great reviews on the rc6 that its just me having this issue. Please help!!! What can I do from here to update my 5.1? My desktop just got fixed and I have no I internet yet other than my captivate which has real weak signals at my new house. I don't use the odin program you mention because of the desktop being down for over a month. Im limited to internet providers at the new house and I need to get it going soon. My captivate has been my internet portal for the last month and it sucks compared to my desktop not to mention poor signals here. I would like to tether my captivate to my desktop as well but have no clue on how to get it to work. I don't flash back to stock like you mention in your steps but I do delete data and cache and all. Like I said I love the work that you do and would love to donate soon. What can I do to enjoy the updates and full capabilities of this rom? Please help! Thanks in advance!

I would power phone off, hold volume up and down and power. When at&t comes up let go
Wipe cache partition
Go back
Advanced clockwork
Wipe davlik cache
Go back
Install zip from sd
Choose zip
Rc6
Flash
When done go back
Wipe both cache again
Factory reset
boot
See if that fixes it. Did you have oc settings saved at boot?
Odin would be nice though
Sent from my Captivate using XDA Premium App

I recommend using odin to flash back to stock and also do a master clear. After this you need to re-root, install rom manager, flash clockwork, reboot to recovery, and install rc6 from scratch. This method is recommended to avoid common issues. Good choice with paragon. Killer rom.
Sent from my SAMSUNG-SGH-I897 using XDA App

jayjr1105 said:
I recommend using odin to flash back to stock and also do a master clear. After this you need to re-root, install rom manager, flash clockwork, reboot to recovery, and install rc6 from scratch. This method is recommended to avoid common issues. Good choice with paragon. Killer rom.
Sent from my SAMSUNG-SGH-I897 using XDA App
Click to expand...
Click to collapse
He does not have a pc with internet connection. I do not believe odin is an option at the moment
Sent from my Captivate using XDA Premium App

^^^ Thanks for the replies guys.
Good news is I got my desktop internet up temporarily using a wireless card and got a weak open signal.
Bad news is I am still lost! What Odin do I need and where can I download it from?
I tried searching and only found the odin3 but I'm hesitant to proceed with anything without getting some more info. What version do I need for my windows computer? 32 or 64 bit?
I have the SDK Manager on my desktop as well but still have no clue what to do with it or how to use it. I'm still looking into that.
Also, how can I get my phone to tether my desktop and get internet signal?

Is RC6 a full rom or just an update?
If I flash back to stock and reinstall RC6 would I need RC5.1 first then the RC6 update?

turbosr123 said:
Bad news is I am still lost! What Odin do I need and where can I download it from?
I tried searching and only found the odin3 but I'm hesitant to proceed with anything without getting some more info. What version do I need for my windows computer? 32 or 64 bit?
Click to expand...
Click to collapse
start>>run...type msinfo32.exe and enter...a window will come..click system summary..see system type on right hand side....x86 means 32 bits and x64 means 64 bits....So download Odin3 one click version for whatever version u have...its pretty simple...just download and start Odin...then put ur phone is download mode and plug the USB in the phone..if everything is right, u will see COM in Odin in yellow color...just click start and wait till it reboots
Also check the Odin for your phone...there is one for JH7 and one for Jh6....
turbosr123 said:
Also, how can I get my phone to tether my desktop and get internet signal?
Click to expand...
Click to collapse
you cant tether in stock 2.1(which u will get after using ODIn), but if u root ur phone use wireless tether 2.0.7 app
if u r still on paragon then go to settings>>wireless and network>> USB tethering...or wireless tethering...samsung has inbuilt settings for that in 2.2

I can walk u through odin steps pm me if u like I can also send you the correct odin to use
sent from cappy with di11i rom

mcord11758 said:
I would power phone off, hold volume up and down and power. When at&t comes up let go
Wipe cache partition
Go back
Advanced clockwork
Wipe davlik cache
Go back
Install zip from sd
Choose zip
Rc6
Flash
When done go back
Wipe both cache again
Factory reset
boot
See if that fixes it. Did you have oc settings saved at boot?
Odin would be nice though
Sent from my Captivate using XDA Premium App
Click to expand...
Click to collapse
Thanks I will try and use odin3 to figure this out, but is the RC6 an update or a full rom?
viny2cool said:
start>>run...type msinfo32.exe and enter...a window will come..click system summary..see system type on right hand side....x86 means 32 bits and x64 means 64 bits....So download Odin3 one click version for whatever version u have...its pretty simple...just download and start Odin...then put ur phone is download mode and plug the USB in the phone..if everything is right, u will see COM in Odin in yellow color...just click start and wait till it reboots
Also check the Odin for your phone...there is one for JH7 and one for Jh6....
you cant tether in stock 2.1(which u will get after using ODIn), but if u root ur phone use wireless tether 2.0.7 app
if u r still on paragon then go to settings>>wireless and network>> USB tethering...or wireless tethering...samsung has inbuilt settings for that in 2.2
Click to expand...
Click to collapse
Thanks! I got the right driver and odin3 installed now and I'm tethering as well. works great!
Now I need to try and install RC6 update again using odin3 to flash back to stock. I hope it works with no issues!
Just so I'm on the right track.... Odin3 is the right odin program that I use right?
I don't know what jh7 or jh6 is. How do I check for this?
oxlong27 said:
I can walk u through odin steps pm me if u like I can also send you the correct odin to use
sent from cappy with di11i rom
Click to expand...
Click to collapse
Thanks! I will pm you before I use the wrong odin and brick the phone.

Rc6 should have a full rom version, I do not recall if there was a no wipe. Make sure you have the full wipe rom if flashing from stock
Sent from my Captivate using XDA Premium App

if you already have paragon rc 6 just simply do factory reset back-up your apps with the included titanium back-up, wipe dalvik cache and wipe battery stats from cwm recovery menu then reboot your phone. I doubt if you have tweak the over clocking/ voltage apps and not resetting it back to factory default when updating to rc 6 this may cause some issues. if you can open your oc/voltage control app in the menu simply remove boot setting, reset all the voltage slider to 0 and limit overclocking to 1000 mhz then apply, after that do tibu, factory reset, wipe dalvik cache and battery stats then reboot.

if you already have paragon rc 6 just simply do factory reset back-up your apps with the included titanium back-up, wipe dalvik cache and wipe battery stats from cwm recovery menu then reboot your phone. I doubt if you have tweak the over clocking/ voltage apps and not resetting it back to factory default when updating to rc 6 this may cause some issues. if you can open your oc/voltage control app in the menu simply remove boot setting, reset all the voltage slider to 0 and limit overclocking to 1000 mhz then apply, after that do tibu, factory reset, wipe dalvik cache and battery stats then reboot.

gorgy76 said:
if you already have paragon rc 6 just simply do factory reset back-up your apps with the included titanium back-up, wipe dalvik cache and wipe battery stats from cwm recovery menu then reboot your phone. I doubt if you have tweak the over clocking/ voltage apps and not resetting it back to factory default when updating to rc 6 this may cause some issues. if you can open your oc/voltage control app in the menu simply remove boot setting, reset all the voltage slider to 0 and limit overclocking to 1000 mhz then apply, after that do tibu, factory reset, wipe dalvik cache and battery stats then reboot.
Click to expand...
Click to collapse
You know I did mean to mention this!!!
I did adjust my voltage and saved them. I remember running a quad test result of 1454. I never did remove the boot though! Maybe that's all that it was not able to flash to stock and rc6 not functioning right!!!
Thanks I'll give this a try.

So I used odin3 to flash back to stock 2.1 eclair.
Now I can't root my phone anymore!
Usb drivers are not picking up the device and I can't use desktop to transfer root files. I tried downloading some root zips to my phone but it doesn't except the downloads. I can't flash using clockwork because I am not rooted now.
I can't get adb to work even though I follow each step by step of the sdk download.
I'm in a worst situation now than before. Any help would be appreciated!!!

turbosr123 said:
So I used odin3 to flash back to stock 2.1 eclair.
Now I can't root my phone anymore!
Usb drivers are not picking up the device and I can't use desktop to transfer root files. I tried downloading some root zips to my phone but it doesn't except the downloads. I can't flash using clockwork because I am not rooted now.
I can't get adb to work even though I follow each step by step of the sdk download.
I'm in a worst situation now than before. Any help would be appreciated!!!
Click to expand...
Click to collapse
paragon rc 6 is already pre rooted you don't need to root your phone when installing paragon rc 6 just download the full room and the update zip and paste/copy it into your internal sd card. try installing samsung kies mini in your computer it will also install the corresponding driver. once your computer running odin recognizes your phone do a master clear. to do this just enable debugging mode but don't turn off your phone your phone will then reboot itself after the process. install the update zip first with cwm you have to do it twice. first the 3 button combo recovery it is a blue one the default in eclair then install update zip http://forum.xda-developers.com/attachment.php?attachmentid=490798&d=1295155828 once you have install it it will be back again to recovery mode and now a green color now install again the full rom of paragon rc6 http://xda.deanhatescoffee.com/roms/paragon-rc6-full.zip then wait for the phone to reboot.

I just wanted to give a BIG thanks to oxlong27.
You saved me big time from bricking my phone and loosing all data or worst.
They need a counter next to the thanks button! Haha!
I appreciate you going out the way and guiding me step by step over the phone, email, and text. I love my phone more than ever now!!! Everything works great and I'm lovin' the di11ligaf rom. Thanks a bunch bro!!! I didn't think this forum had members like you but I was wrong. Thanks to everybody else who replied with suggestions too!

[Help] My X8 reboots once enable Wifi

My X8 phone runs in reboot loop once I turn on wifi. After on wifi, the phone reboot in few seconds. Then, it goes into "Free Xperia" & CM7 logo, and then reboot again as a loop.
My X8 phone is E15i, running CM7.1, with FXP 43 kernel.
I tested some features are working, like 3G, dial calls, speaker music, multi-touch (dual-touch?). I can even install apps from market via 3G.
So, I uses CWM to do "wipe data/factory reset". The phone can load up successfully again.
Does anyone know what's going on? Any solution?
Thank you very much!

No reply? oh, did I post in a wrong location?

Confused
DOnt know!

oh it's confusing? oh sorry
Basically, My X8 phone reboots immediately after I turned on wifi.
and it's running CyanogenMod 7.1 (Android ver 2.3.7), with FXP 43 kernel.

I am having the same problem
I am having the exact same problem on my LG G2x Domination build 79 as well.
Every time I turn my WiFi on, phone restarts it self
I tried pulling out the battery but that didn't fix it.
if anyone have any tips please help us out
Thank you

Yea, Wifi is still not working up to now :S
Any guess or any related hint I can refer to as well?
Now I mostly just use bluetooth to transfer apps XD

Well , did you try flashing another ROM ?

The ROM and kernel are very old with many bugs, the development of them stopped a long time ago. Flash this kernel and this ROM.

I am facing the same issue.
After installing the latest MiniCM and nAa Kernel, my phone started rebooting constantly -when enabling the wi-fi or Data. .
I have noticed that it works only on charger. I decided to re-flash to stock 2.1 but it did not help.
I also flashed Android 1.6 stock on the phone but it did not help.
It is like it has no battery power.... What can I do?
I

Okay all!
I had that prob when my phone on old kernel and ROM
Root n unlock BL
Flash the latest kernel
Backup!
Factory reset, etc
Flash ROM
Done!
Do not restore data in diferent kernel!
It make some error like wifi bug!
Sent from my E15i using xda app-developers app

Ow yeah..
try to clear cache first dude!
If still not working use my instruction..
Sent from my E15i using xda app-developers app

I did it with no success. Any other ideas?
Tried to use the stock kernel,nAa 13 With MiniCM (latest version) I am getting worried. What could have happened? The phone is working only on charger without reboot.

I even tried afls9 kernel+GDXv28b.
The steps i have performed:
1) Wipe data/factory reset
2) Wipe cache partition
3) Advanced - wipe dalvik cache
4) Wipe battery stats.
5) Flash rom + addons
Nothing happens. As soon as the USB is disconnected from the PC or Charger it starts constant reboot...... :crying:

JAngelus said:
The phone is working only on charger without reboot.
Click to expand...
Click to collapse
what do you mean with that???
wifi work when charging or
no rebbot while charging??
i frightened if its a hardware issue bro

Get a logcat is my idea. Then we can actually see why the phones doing that and suggest something to help
X10man
Sent from my U20i using xda premium

I will do it tomorrow, because it is 2:30 am here. And yes. It is not restarting when it is charging.
I have a question - can this be a Baseband issue?
Sent from my E15i using xda app-developers app

Here is a logcat of the phone.

Galaxy Note Dead ??

Well here's the whole story:
Day before yesterday my PC broke so I used my Note as a temporary replacement of PC.
I hooked up my Note via MHL cable on 24” PC monitor. Everything worked fine – I browsed the
web, read forums via TapaTalk and watched one episode of series that I normally watch.
I left MHL cable attached to phone all night to charge it. I only turned off phone screen and naturally
MHL connection stopped working and monitor went to standby.
In the morning everything was fine. I played NFS Most Wanted for around hour via MHL cable.
Later I connected my home speakers to audio out on phone to listen Tune-In radio. Again I left MHL connected to phone and just turned phone screen off. because if it's on and MHL connection is alive it
consumes more power than charger connected to MHL can provide so it's discharging battery. I left it so and went to take care of some things.
When I got back and tried to turn on the phone screen was black but capacitive buttons lit up, and touch was working fine, I could hear ripple effect of my lock screen and picture of it showed up on my 24” monitor, so I restarted phone “on blind” - touching black screen on phone and watching my touches on 24” monitor that was still connected via MHL.
After this action my phone was dead.
It wont to turn on – no sign whatsoever – no sound, no vibration, screen wont to turn on.
If I connect phone to charger there's no reaction.
If I try to enter recovery or download mode result is the same – no reaction
But there's little hope: after I pulled out the battery and left it like that over night, in the morning I managed to get in download mode and flashed stock 4.0.4 firmware via Odin – but again phone wont boot and I cannot enter download or recovery mode. I must pulled out battery and wait 6-8 hours, after that I got one chance to boot to download mode. Not sure if I can boot to recovery mode since I tried this only once.
Bottom line I can try to claim my warranty but first I must format my internal storage because prior
my phone broke I was running Ultimate 5.1 ROM based on JB leak and I have stuff like titanium backup, cwm folders and I think that I also have .zip of Ultimate ROM on my internal – so enough
evidence that I wasn't on stock unrooted Samsung firmware and I can lose my warranty if in repair center somehow manage to boot up my phone and find this stuff on my internal memory.
Any tips or tricks how to revive my phone ??
Sorry for longer post but I wanted to explain everything that happened before my phone died.

Charge your battery and then use Jig usb, if it isn't hardware fault or isn't bricked by wiping while on stock ics it will go into download mode,
this Jig cable solved a lot of this issues

evaworld said:
Charge your battery and then use Jig usb, if it isn't hardware fault or isn't bricked by wiping while on stock ics it will go into download mode,
this Jig cable solved a lot of this issues
Click to expand...
Click to collapse
as evaworld suggested first use jig it should work.. if it doesn't then claim warranty from service centre and they don't care what you have in your internal memory they will format everything after fixing the problem whitout looking into your device internal storage
Sent from my GT-N7000 using Tapatalk 2

But as i wrote in first post I can enter download or recovery mode if i pull out battery and wait 6-8 hours. I don't need USB jig for that.
So if I enter recovery on stock ICS ( my phone has insane chip ) I should just wipe data/factory reset OR is it better to flash stock GB and than wipe ?
But to me this looks like hardware failure not like bricked device... Because when i flashed stock rom via odin ( and checked auto reboot) phone wont to boot... Just black screen... no sign of life...

Pablo87 said:
But as i wrote in first post I can enter download or recovery mode if i pull out battery and wait 6-8 hours. I don't need USB jig for that.
So if I enter recovery on stock ICS ( my phone has insane chip ) I should just wipe data/factory reset OR is it better to flash stock GB and than wipe ?
But to me this looks like hardware failure not like bricked device... Because when i flashed stock rom via odin ( and checked auto reboot) phone wont to boot... Just black screen... no sign of life...
Click to expand...
Click to collapse
Charge ur battery outside of the SGN.
With hdmi cable u can't charge ur phone, he is just giving u extra electro supply so ur note can run TV/HD screen with hdmi cable.
Because this happened while u were connected to ur monitor, settings were stored like u are still connected with it (this is bug on some ICS and JB ROM's).So charge ur battery outside the note, when charged, boot ur phone with hdmi cable plug into note and screen.
After that u should be able to solve ur problem.
If not we will try something else.
:highfive:

Ok. Battery is fully charged with external charger. Will try this trick around 02:00 when I get home from work.
One more question: I can get to stock recovery tried that yesterday - should I wipe/data factory reset since i have insane chip? I'm not on ICS as I wrote in first post but on stock JB leak nonrooted with stock recovery.
Sent from my Skate using Tapatalk 2

Stock JB kernel is still not confirmed safe. So no. Flash a safe kernel first.

How to flash safe kernel when I'm nonrooted and have only stock recovery? Is there kernel that i can flash via odin?
Sent from my Skate using Tapatalk 2

Yes Philz kernel for the JB leak. This can be flashed via stock recovery and it will provide you the safety

Can you provide link to Philz thread? I'm on TT and search is not working like it should.
Thanks.
Sent from my Skate using Tapatalk 2

Sure
http://forum.xda-developers.com/showthread.php?t=1901191

OK. Just flashed Philz kernel and recovery. In the morning I will do a wipe.
Should I wipe only:
-wipe data/factory reset
-wipe cache
-wipe dalvik cache
OR i should go full wipe ( system, preload, internal sd card) and again flash stock ROM ??

If you are going to flash a new rom then select the "clean before new rom flash" option from Philz settings. That will clean the old rom.
Then you can go to advanced and select reboot download.

Ok here's what I did in the morning:
-wipe data/factory reset
-wipe cache
-wipe dalvik cache
-reboot system
System booted, I could hear boot sound and capacitive buttons lit up but there's nothing on phone screen - it's black but touch is working. When I connected phone to MHL cable picture shows up on monitor.
So that means that GPU is working, but also i know that touch & screen are working fine in recovery so why i can't get picture on phone screen?
Sent from my Skate using Tapatalk 2

Something messed up in the mhl switch. You could try flashing the rom again using PC odin in download mode.
And before flashing the new rom, make sure you follow the steps I mentioned above for a clean install.

Ok. Thanks for reply.
Now I must wait around 6h before I can try again - to enter recovery and do all wipes and another 6h to enter download mode to flash rom.
Will do all necessary wipes and also format internal sd card - probably have lots of junk there...
Sent from my Skate using Tapatalk 2

Yesterday I turned phone on, let it boot to os (screen still was black but I could hear boot sound ) and copy my data via USB cable.
Then i shut it down.
After 6h i tried to enter recovery - no luck. After 8h i tried again - still no luck.
Now it seems that phone is completely dead.
I will wait 24h before trying again.
What to do if still won't to show any signs of life?
Sent from my Skate using Tapatalk 2

Don't know why you have to wait for such a long time. Any ways just make sure battery is charged.
Sent from my GT-N7000 using xda premium

Well I finally managed to enter recovery and do all necessary wipes:
-wipe data/factory reset
-wipe cache
-wipe dalvik cache
-format system
-format preload
-format emmc
And i flashed Ultimate JB 5.1 LSC based but end result is the same: screen on phone won't to turn on:
Here's the video:
http://youtu.be/-Y9gZIjSgzw
Only left to try stock GB. But on sammobile there's no GB for download. Where I can find stock GB for download ?

there are GB firmware on sammobile. dont use the search there. use the drop down menu and select note and your region.
You should have tried to flash a stock ICS or GB rom using download mode..

I need help "charging problem"

I can't charge my "s advance" while it off when i do that my phone automatically turn on and if the charger already plug in and i turn my phone off it's restart !!
now my phone fully discharge and i can't turn it on to charge it, and when i plug in charger no thing happen just Vibration
Notice
I try to reset factory twice before i still have this problem
please help

try reflash stock firmware using odin . and then enter recovery to factory reset the phone..

Thats nonsense. If he flash by Odin stock FW, no need to do factory reset or wipe something.
Powered by CM10.1

R_a_z_v_a_n said:
Thats nonsense. If he flash by Odin stock FW, no need to do factory reset or wipe something.
Powered by CM10.1
Click to expand...
Click to collapse
well its nothing to loose if try it..

lawong said:
try reflash stock firmware using odin . and then enter recovery to factory reset the phone..
Click to expand...
Click to collapse
I tried to flash stock firmware 2.3.6 and 4.1.2
Using odin.. and the problem still here :/

HaNy_N said:
I tried to flash stock firmware 2.3.6 and 4.1.2
Using odin.. and the problem still here :/
Click to expand...
Click to collapse
change ur charger unit, imo output voltage is too low

Ertocell said:
change ur charger unit, imo output voltage is too low
Click to expand...
Click to collapse
But I already use the original charger which came with the mobile
or you mean that the charger has damaged ?!

HaNy_N said:
But I already use the original charger which came with the mobile
or you mean that the charger has damaged ?!
Click to expand...
Click to collapse
Yes, try another one to see if problem is in charger. Try charging with USB on PC for example.
Sent from my GT-I9070 using Tapatalk now Free

leave the phone connectet to the charger... overnight?
reset battery data, remove it...
(ever on stock JB phone is propably always on while charging)
Sent from my GT-P1000 using Tapatalk 4

i think it's phone usb port or battery that's failure.. coz its like nothing wrong with the software and charger, when charger got some problems there's no respon at all if plugged it in to a phone..
Sent from my GT-N7000 using XDA Premium 4 mobile app

HaNy_N said:
I can't charge my "s advance" while it off when i do that my phone automatically turn on and if the charger already plug in and i turn my phone off it's restart !!
now my phone fully discharge and i can't turn it on to charge it, and when i plug in charger no thing happen just Vibration
Notice
I try to reset factory twice before i still have this problem
please help
Click to expand...
Click to collapse
I had the same problem! First root your device. And then use a custom rom such as this one
Steps to Install Android 4.2.2 on Samsung Galaxy S Advance GT-I9070 via Unofficial AOKP
Step-1: Download AOKP Android 4.2.2 for Samsung Galaxy S Advance to computer
Step-2: Download Google Apps
Step-3: Connect Galaxy phone to computer using USB cable. Copy downloaded zip files to SD card of phone. Do not extract any file
Step-4: Disconnect phone from computer and switch it off. Wait five to six seconds for vibration to confirm complete power off
Step-5: Boot Galaxy S Advance into recovery mode by pressing and holding Volume Up, Home and Power until Samsung logo appears. Then release all three buttons. The device will be in recovery mode soon
Note: In recovery mode, use Volume buttons to navigate between options and Power button to select desired option
Step-6: In recovery mode it is important to perform a Nandroid backup of existing ROM, which can be restored later in case the new ROM does not work or users wish to go back to previous firmware. To perform Nandroid backup, select Backup and Restore and then, on the next screen, select Backup again. When backup is done, go back to main recovery menu
Step-7: Perform data wiping task to avoid clash between new and previous ROM. Select wipe data/ factory reset, then select Yes on next screen to confirm action. Wait for a few minutes until data wiping process is completed and then go back to CWM recovery menu. Select wipe cache partition and select Wipe Dalvik Cache under Advance option to perform Dalvik cache wiping. Once action is completed, return to recovery menu
Step-8: Select install zip from sdcard and then select choose zip from sdcard. Now navigate to AOKP ROM zip earlier copied to SD card of phone. Press Power to select and confirm installation by selecting Yes on next screen. ROM installation should begin
Step-9: After ROM is installed, follow similar procedure (Step-8) but this time choose Google Apps package
Step-10: When installation process is completed, go back to main recovery menu and reboot phone by selecting reboot system now. The device will reboot into customised AOKP firmware. The phone will take a few minutes to boot up for the first time
The Samsung Galaxy S Advance should be now updated to Android 4.2.2 Jelly Bean, with unofficial AOKP ROM. Head to Settings > About Device to verify new software running on phone
Note: To go back to previous ROM, boot phone into recovery, select Backup and Restore and then restore ROM by selecting from list
All instructions are there in the site. Also this is a new Android OS version . It removes the bloatwares and significantly improves performance and will hopefully solve your "CHARGING BUG" and improve the user interface as well!BUT BE CAREFUL , THIS IS NOT A TOUCHWIZ ROM ! ITS AN AOKP ROM, so you'll lose TOUCHWIZ features.
If I did help ,please don't forget to click on the THANKS button !!!
Cheers !!

[Q] N7000 bricked - No USB connection possible

ok first things first, imma noob, and i did a stupid thing.
It started in last summer when i wasnt able anymore to connect the N7000 to my WIN 7 64bit (probably after an update to ICS /JB).
Well since i never needed to transfer files (64GB-sdxc) i didnt care much about it. but then in last times my phone/ram cache was full of so much unblockable bootloaded crapware so that i wanted to switch from a official 4.1.2 firmware to cyanogen. But since my USB wasnt working it wasnt that easy.
Side note: the USB-port was ****ed up before (short-circuit, screen woke up due to fake-loading). i fixed that by luck and some dark magic.. so of course i thought the connection problem were because oif the broken jack.
The day before yesterday i tried for 8 hours anything i could find to install another bootloader and flash CM (CWM / TWRP / Triangle away / minimal adb/fastboot etc.); didnt work, CWM seemed to boot up but loading failed all the time at 1/3rd of the bar at screen went black.
Yesterday my friend came over and i tried to use his USB-jack to connect my phone to my Pc, which failed. THEN i put the "broken" one from mine in his N7000; that was efficacious, everything worked fine, so the USB-jack wasnt the problem.
Later i had, out of frustration, moronism, and anger, the glorious idea to download and flash another (older) Kernel via mobile odin to install an old gingerbread stock rom on it afterwards.
That was stupid as i know now, all i can do now is enter download mode, but without USB-connectivity and the stock bootloader with the options reboot system / update from sd / wipe data / wipe cache / test redbend fota(FS) and boot, which stucks at the N7000-screen.
After i managed to **** things up i found an article which describes my (now former) USB-problem perfectly. it says to put in a special number combination on the phone to get to phoneUtil and then switch from modem mode to pda mode. i knew this screen before but i couldnt find it at the preferences on JB.
Now comes my question: What could be done to unbrick my phone? is there any help?

Can you not try another USB cable? Try cleaning out the pins and see if it works. Then flash speedmod.
Sent from my GT-N7000 using Tapatalk

backstreetboy said:
Can you not try another USB cable? Try cleaning out the pins and see if it works. Then flash speedmod.
Sent from my GT-N7000 using Tapatalk
Click to expand...
Click to collapse
>Just to clarify: with USB-Jack i mean the USB-Port with the connector to the motherboard; sorry if i misused the word
I dont think so cause we used only his cable when he was here and my phone neither connected with mine nor with his USB-Jack, but both Jacks worked on his phone.
Pro-question: Is there a difference between (usual) USB-connection in booted mode and connection in download mode? i mean is download mode something like a "safe mode" where the USB doesnt need to run on 100% availabilty? Should i try to find the phone via Odin in downdload mode again by using his cable? i dont think this could work else.

Samsung galaxy note gt-n7000 bricked. Need HELP!!
The phone shows " Firmware upgrade issue encountered an issue. Please select recovery mode in Kies & try again". I cant go to recovery mode ie. vol up+home+power. THings I have tried:
1. with Kies the device isnt recognised. I have updated the driver as well.
2. with odin every thing fails... flashing "all samsung recovery.tar", flashing stock jelly bean, flashing .pit file
I have googled for days and tried many things but isnt working. Need help