Related
I'm currently using MIUI ROM 2.3.7 (build MIUI-1.12.2)
baseband: 1035.21_20110405
kernel: 2.6.32.45-cyanogenmod ([email protected]#1)
Curently having network breakdown issue. might have a few breakdowns in a day, sometimes don't have. do i need to upgrade baseband or kernel? can anyone help me please. i'm having a lots of appointment daily as i can't have breakdowns so often.
I don't understand what you mean by breakdown? Is it complete loss of signal? If it is then this happened to me in the galnet's latest weekly and ICS build. I don't know about the ones from miuiandroid or miui.us, as I haven't tried them. But if they share a similar base, then theoretically they should share similar problems unless some post-release fixes were added like those of galnet.
To recover, these worked for me most times:
reboot
manualy trigger network registration
I'm back to CM now. It's most stable and usable for me.
ya, totally loss of signal. its bored to keep rebooting all the time. i dont feel like using the basic android layout/UI rom. MIUI is nice but got some issue. sigh.... anyway, thanks for replying. anyone else would like to help me out???
Well I used 218 bb before, jumped over to 823 and matching ril. No more breakdowns.
Sckank said:
Well I used 218 bb before, jumped over to 823 and matching ril. No more breakdowns.
Click to expand...
Click to collapse
This is good news. Will try. Where'd you get 823?
I got it from temaseek's media folder
kolo2x said:
This is good news. Will try. Where'd you get 823?
Click to expand...
Click to collapse
You can get it from Temasek's mediafire link. Huge thanks to him..!
But flashing this is little tricky. You need to extract the file, then flash the .fls files begining from the biggest file to the smallest - in this order.
flash R375_SIC.fls
reboot the phone
flash AENEAS_FW.fls
reboot the phone
slb.fls
reboot the phone
psi.fls
reboot the phone.
I use smartflash to flash basebands, that is available in the same link.
Hope this helps.
Sckank said:
I got it from temaseek's media folder
Click to expand...
Click to collapse
Lol...great minds and that...!
Thanx Divyan Im at work so its great you give a proper reply
really thanks to u.
No Problem, guys.. Glad that I could be of some help - so little comparing to what we get from XDA.
In the meanwhile, I did test MiUi 1.12.2. too. I used to get this problem of MiUi goes to airplane mode at times.
Then I have flashed Owain's Tweaks. I did make a difference. Phone did not got into airplane mode anymore. Above this I have flashed ironkernel too ( seeking better stability - with undervolt settings of -25 v using pimpcpu).
This combination worked good for me for a couple of days without any issues. Then I jumped back to CM7 Kangs .
You might give this combination, if you feel like.
I'm using 1.11.4 and been having a few issues recently with loss of signal and a reboot was the only thing that fixed the problem. I found that I had a mismatch of baseband and RIL. S I used getril from the market and everything seems ok now. Only had it on for a day so far but it's been fine...
Helllo. I have it the same problems with the network. My phone was losing signal on all roms, cm7, miui, modaco, until i flash the baseband 07 25 and everything works well. Tomorow i will try the miui rom to see what happens.
divyan, i crash my set now. miui did not work on my 2x. tried flashed cm7 and kang. installed but did not boot up after 10 mins each. i downloaded LG RIL and GetRIL.
LG RIL did not mention if my RIL match with the baseband or not. but GetRIL says my baseband does not match with my RIL. i did follow your steps to flash the 823. not working thou.
now in CWM i can backup but i kenot restore. its automatically unmount the /system. darn. i think something wrong with my 2x.
seriously can u teach me how to redo all the stuffs?
i really like miui!
vladutz9 said:
Helllo. I have it the same problems with the network. My phone was losing signal on all roms, cm7, miui, modaco, until i flash the baseband 07 25 and everything works well. Tomorow i will try the miui rom to see what happens.
Click to expand...
Click to collapse
yes bro, do remember to share your experience. seriously headache have to reflash and resetting the 2x all over again and again. kinda stressed!
vladutz9 said:
Helllo. I have it the same problems with the network. My phone was losing signal on all roms, cm7, miui, modaco, until i flash the baseband 07 25 and everything works well. Tomorow i will try the miui rom to see what happens.
Click to expand...
Click to collapse
i have the same problem, with EVERY rom.
currently on 0725 baseband, V20L october version, nothing different: i got signal loss once-twice a day.
tried BB 0208, 0315, 0405, 0602 as well.
I 'll have to try 0823 with 4 separate files, as suggested in this thread
My phone always goes into airplane mode (by itself) after a reboot and a few hours of sleep time - im on cm7 with 725. Once that's done I just set the airplane mode off and it stops disconnecting from the network...
currently running on cm7 night #204 with 0823 and 0208 RIL. been good so far but got issue once i flash ironkernel. dunno why.
Does anyone know if the app "Captivate Keep Alive" is compatible with ICS?
I had been using it, but since I upgraded to ICS, it launches and shows the icon in the status bar, but only shows it initially in running services, then still in status bar, but soon after doesn't show it in running services, no battery drain (apparently it's stopped) and won't close, have to force stop to get it out of the status bar.
Tried to find on the Dev site, App Brain, etc. any documentation, but can't find anything about compatibility with ICS
Unfortunately my phone suffers the random shut downs, especially at high battery levels, when idle.
Thanks
Ive heard of it not working before with ICS based ROMS. But specifically im talking about the Team ICSSGS ROM. So first, you need to tell us what kernel you are running and what ROM. Because I switched to the Glitch new build 2 days ago and have yet to suffer a random shutdown or charge death which I got almost daily with the old build. We will see if this lasts though.
capocaccia said:
Ive heard of it not working before with ICS based ROMS. But specifically im talking about the Team ICSSGS ROM. So first, you need to tell us what kernel you are running and what ROM. Because I switched to the Glitch new build 2 days ago and have yet to suffer a random shutdown or charge death which I got almost daily with the old build. We will see if this lasts though.
Click to expand...
Click to collapse
Thanks,
running Doc's Master ICS V5 with the included kernel Glitch V14-B5 Kernel
I also wasn't having any shutdowns, and thought maybe it was solved with this ROM/kernel, but then had an overnight shutdown about a week ago, but still overall probably better, because when I get up in the morning and see that captivate Keep Alive stopped, and battery is at over 80% and didn't shut down, so looking better, except that one shutdown.
Ok, B5 just had a new release a few days ago but for some reason the dev didnt change the title or update the thread. He just made a post about it. I just want to be sure, are you running the kernel I have linked in this post? It was just posted 2 days ago.
http://forum.xda-developers.com/showpost.php?p=23665451&postcount=965
Haven't updated to the most recent version, still the version that came with the ROM, which I downloaded maybe 2 weeks ago. Didn't see the kernel was updated, now wondering if I should consider updating the kernel to the newer version, notice he indicates Nandroid backup should work, which is nice.
Edit: not clear if the other version is the right one for my ROM, maybe should stick with the version I have.
Edit 2: I guess that's the only glitch kernel, as you mentioned he hasn't updated the title/name inn a while (on my phone the version from 2 weeks ago shows V5)
M973 said:
Haven't updated to the most recent version, still the version that came with the ROM, which I downloaded maybe 2 weeks ago. Didn't see the kernel was updated, now wondering if I should consider updating the kernel to the newer version, notice he indicates Nandroid backup should work, which is nice.
Click to expand...
Click to collapse
I would. Thats the kernel I am running and have found it more stable than the older release. Its a simple download and flash through CWM.
EDIT: If you are currently running ICY Glitch, then an update will not effect anything. If you are currently running another kernel then you will need to check first. Post in the Q and A for your ROM.
capocaccia said:
I would. Thats the kernel I am running and have found it more stable than the older release. Its a simple download and flash through CWM.
EDIT: If you are currently running ICY Glitch, then an update will not effect anything. If you are currently running another kernel then you will need to check first. Post in the Q and A for your ROM.
Click to expand...
Click to collapse
Thanks, I'm seeing that, just not as clear without the updates to the version number, etc. Will do.
Let us keep the Marvel ROM development thread clean. Where everyone can post here. Even newbies.
So all Q&A will go here.
Other senior members can help answer questions are also welcome here.
Helloo...im using your great rom for few days.Its quite good...but kinda slow for me with stock kernel(i know that i can flash other kernels) Can you add strong accord kernel ?
Thx
Sorry for bad Eng.
Sent from my LG-P970 using xda app-developers app
It is possible that the ROM provides customization options within the system and not at the time of the install mode similar CM10 that are based on?
For example: clock in the center or on the side, various styles of lockscreen, clock + date style, style icons and battery etc..
Another thing would be, you can deploy LED notifications?
Sorry my English.
crystallogenesis said:
Helloo...im using your great rom for few days.Its quite good...but kinda slow for me with stock kernel(i know that i can flash other kernels) Can you add strong accord kernel ?
Thx
Sorry for bad Eng.
Sent from my LG-P970 using xda app-developers app
Click to expand...
Click to collapse
Ok I will add strong accord in the install options.
elderap said:
It is possible that the ROM provides customization options within the system and not at the time of the install mode similar CM10 that are based on?
For example: clock in the center or on the side, various styles of lockscreen, clock + date style, style icons and battery etc..
Another thing would be, you can deploy LED notifications?
Sorry my English.
Click to expand...
Click to collapse
Customization options within system requires a lot xml file modifications. This will take some time. For notification, have you tried LG Touch LED Notification app? Its free on play store.
I've got a question about choosing apps, can i add my apps before install/flash rom? i mean, can i add my luncher, keyboard, im using holo luncher and swift key (both are bought) and it will be nice to have only them without others lunchers/keyboard.
AW: [Q&A] Marvel ICS - Highly Customizable ROM
darth2805 said:
I've got a question about choosing apps, can i add my apps before install/flash rom? i mean, can i add my luncher, keyboard, im using holo luncher and swift key (both are bought) and it will be nice to have only them without others lunchers/keyboard.
Click to expand...
Click to collapse
No that works not. Generally speaking you need something first to change it.
Sent from my LG-P970 using xda app-developers app
I just installed this rom since about a week, had some battery drain problems. I switched to the interactive governor and this got a bit better. One big drain is wifi, for this i installed an app which disconnects wifi when screen goes off and on again when i wake my phone. Another problem is that the phone is constantly awake and never goes into deep sleep. Any solution for that?
hi ppl, here is my review, i change to hellmanor kernel. first impression that its running good, i need a lot of battery and when i set to lionheart and cfq. i manage to have a working phone over 24 hrs with low usage, around 8 short calls, about 2 hrs of wifi, no data 2/3g at all, and around 1 hr of gaming. and few minutes ago i put to recharge, battery left b4 charge - 44%
the funny thing is that i notice that my phone start to ring very late while incoming calls, i use vibrate with sound, while a call is incoming, the phone vibrate around 5 sec b4 the sound kicks in, this wasn't happening with stock kernel.
do u think that it might be the governor i chose or maybe I/O ? maybe the low cpu speed when phone in deep sleep?
thanks
sol
Lockscreen
Hi Tantrums,
first thanks for you work.Greate job I have several questions. Is it possible turn off the locksreen rotation? I hate it If i get the sms or miss call, the notification bar show me. But if i turn off this in notification, sms still like unread. I want accept it from notification, not go to the sms or dialer and tap to miss call or sms. Last is GPS. After lock the satelites, gps work normal. But if i want use it for running, walking and others, gps is not realy correct. Sport tracker show me bad way, distance and speed. I guess gps use only few satellites. Do you can change this for next version? Please! Because you ROM is awesome.
Thanks you.
I wonder how I install CWM recovery without flashing the regular v20s via SFT? I tried not to install this custom CMW ('ve had problems with it to restore roms at other times) but could not.
I await your help.
Hello!
I have not been able to sort out the issue of date & time sync with my network provider, I have to do it manually & I have to go through all the pain every time I reboot my phone.
Also, is there any app to control the extensive battery drain?
chintan.bhaidani said:
Hello!
I have not been able to sort out the issue of date & time sync with my network provider, I have to do it manually & I have to go through all the pain every time I reboot my phone.
Also, is there any app to control the extensive battery drain?
Click to expand...
Click to collapse
from the Play Store, download and install "No-frills CPU Control". Open the program and set the governor to either "performance" or "interactive". Set the scheduler to "cfq". That should help with the battery. (it should actually double it).
Not sure about the time sync. Someone else was manually having to do it too.
Have you performed a factory reset via settings or the hidden menu?
chintan.bhaidani said:
Hello!
I have not been able to sort out the issue of date & time sync with my network provider, I have to do it manually & I have to go through all the pain every time I reboot my phone.
Also, is there any app to control the extensive battery drain?
Click to expand...
Click to collapse
Did you flash v30 baseband? Coz for me it solved the problem with auto time/date sync.
sent from my smart toaster
AW: [Q&A] Marvel ICS - Highly Customizable ROM
I had the problem with wrong time sync a lot with CM10 as I used a v20 baseband. After upgrading to v30 baseband I only had it with one CM10.1 ROM.
Sent from my LG-P970 using xda app-developers app
is there any difference if its Unknown baseband or flashing a baseband?
marckjao said:
is there any difference if its Unknown baseband or flashing a baseband?
Click to expand...
Click to collapse
I used the base band from Huexxx when I updated from GB to ICS:
http://huexxxtuff.blogspot.com.es/2013/01/izs-rom-links.html
You should be able to change the base band even after you install a ROM image.
Hi, I'd like to try this ROM but I just have a few quick questions as I couldn't find a clear answer reading through all the posts in this thread and the dev. thread...
Is flashing the baseband absolutely essential to run this ROM? I currently have V20j as I'm in Canada on the Koodo (Telus) provider. I noticed the basebands (versions V30x) are for Europe and Germany etc. Would this not cause an issue as I'm in Canada? Would the language still be in English?
Also there are several baseband versions, I'm not sure which one I should use. Can anyone help me understand which one I should use (if any)?
Does this ROM contain it's one gapps version as well as it's own Kernel? (I'm currently using kernel 3.0.8)
I'm currently running Mackay 2.7.6 (JB 4.2.2) so I'm assuming just a factory/data wipe, wipe dalvik cache, wipe cache, and install the zips from SD, correct?
Can someone confirm the bluetooth works with this ROM (audio works) as well as camera works completely?
Thanks in advance.
I will try with the v30 baseband.
MEC-777 said:
Hi, I'd like to try this ROM but I just have a few quick questions as I couldn't find a clear answer reading through all the posts in this thread and the dev. thread...
Is flashing the baseband absolutely essential to run this ROM? I currently have V20j as I'm in Canada on the Koodo (Telus) provider. I noticed the basebands (versions V30x) are for Europe and Germany etc. Would this not cause an issue as I'm in Canada? Would the language still be in English?
Click to expand...
Click to collapse
No it's not essential. I don't know if it's better to stay with your baseband or flash the european open. I would first stay with the one you have and than after a few days try the v30 one, if v30 works well it's probably better. You know that some contries in europe speek English too? (Like England.)
Does this ROM contain it's one gapps version as well as it's own Kernel? (I'm currently using kernel 3.0.8)
I'm currently running Mackay 2.7.6 (JB 4.2.2)
Click to expand...
Click to collapse
Your getting something complettly wrong here, this is not CM9 based it's based on the oficiall LG v30b, so Gapps are not needed (you could say there already included, but it's more like there not removed). Marvel11 comes with aroma installer and includs 3 different kernels. Mackay is CM10.1 based, so everything is different, the kernel for sure.
Can someone confirm the bluetooth works with this ROM (audio works) as well as camera works completely?
Click to expand...
Click to collapse
Camera works, GPS didn't for me (europe) but it might for you, bluetooth I hardly ever use so I can't garantie but it works on other v30 based ROMs so I don't see why not. (As said it's not CM9 based.)
Don't make a fuss just try it, it should work. If it doesn't you probably made something wrong, than come back explain what you did and probably a few ppl can help you.
do we need to flash v30 baseband separately? doesn't it gets flashed along with the ROM?
Hi,
my lg p990 with the latest cm10.1 nightly is crashing all the time in a way that it doesnt work at all and drains the battery until you pull the battery out. i had this problem with cm10 and cm10.1 for ages and i dont know whats causing it. because of the way the phone crashes i dont have any logfile whatsoever. its just reallly annoying.
Any help ?
(pls dont answer like "did you turn the phone on?" or similiar non-smart questions, yes i did everything according to the "book", i also installed a lot of apps on the phone)
EntroP said:
Hi,
my lg p990 with the latest cm10.1 nightly is crashing all the time in a way that it doesnt work at all and drains the battery until you pull the battery out. i had this problem with cm10 and cm10.1 for ages and i dont know whats causing it. because of the way the phone crashes i dont have any logfile whatsoever. its just reallly annoying.
Any help ?
(pls dont answer like "did you turn the phone on?" or similiar non-smart questions, yes i did everything according to the "book", i also installed a lot of apps on the phone)
Click to expand...
Click to collapse
you used the version of the bootloader right?
humandroide said:
you used the version of the bootloader right?
Click to expand...
Click to collapse
i used the version you can download on cyanogenmod website and installed it normally via cwm (with full wipe and everything)
i never touched anything related to bootloaders (just used the standard one i guess...)
Did you use stock CM kernel?
I didn't tried the latest cm nightly, but cm kernel has a weird bug causing the CPU to stick at 1000mgz all the time.
Use some apps to see for yourself, cpu spy.
I use trikster mod app to properly set the cpu.
And I recommend avatar rom, it is like CM but has a suport/option for miui themes.
Rom is super smooth and has god memory menagement/multitasking, even the stock clock alarm hasn't failed me.
Sure it has all the known CM bugs like panorama not working, same kernel bug, ect. but it's stable.
imperator01 said:
Did you use stock CM kernel?
I didn't tried the latest cm nightly, but cm kernel has a weird bug causing the CPU to stick at 1000mgz all the time.
Use some apps to see for yourself, cpu spy.
I use trikster mod app to properly set the cpu.
And I recommend avatar rom, it is like CM but has a suport/option for miui themes.
Rom is super smooth and has god memory menagement/multitasking, even the stock clock alarm hasn't failed me.
Sure it has all the known CM bugs like panorama not working, same kernel bug, ect. but it's stable.
Click to expand...
Click to collapse
nice, i think im gonna try out the avatar rom, it really sucks having to pull the battery every 10 minutes because it crashed miserably
Q&A for [ROM] [5.X] [p880] Euphoria-OS 1.0-beta Unofficial [2-1-15]
Some developers prefer that questions remain separate from their main development thread to help keep things organized. Placing your question within this thread will increase its chances of being answered by a member of the community or by the developer.
Before posting, please use the forum search and read through the discussion thread for [ROM] [5.X] [p880] Euphoria-OS 1.0-beta Unofficial [2-1-15]. If you can't find an answer, post it here, being sure to give as much information as possible (firmware version, steps to reproduce, logcat if available) so that you can get help.
Thanks for understanding and for helping to keep XDA neat and tidy!
the download link is too slow for the new version available. is almost impossible to try to download it. some other link available? please!
There isn't other link for now.
Q:When set to -1 and delete the # they never have backlight when the option is like this.I puttet the # again.How to make it flashing when touch them,not the screen.And how to change backlight time?
delete
Didn't expect such a great stability and performance (and working features) from first public Lollipop ROM. Reboots occur sometimes (adb shell screenrecord crashed, AFAIK it is related to Tegra blobs), but the biggest surprise for me was that the ROM is smooth!
To all contributors: Great job!
bluetooth
Is BLE working? Have somebody tried android wear with this rom?
Someone reported it not working on the 2-1 version, and given that the second post says the dev can't test it themselves, I highly doubt it'll work on the 4-1 version.
Then again, I have no way of trying it myself, really, which at this point is the best way to know for sure.
Sent from my Optimus 4X HD using XDA Free mobile app
ble
SmallDesires said:
Someone reported it not working on the 2-1 version, and given that the second post says the dev can't test it themselves, I highly doubt it'll work on the 4-1 version.
Then again, I have no way of trying it myself, really, which at this point is the best way to know for sure.
Sent from my Optimus 4X HD using XDA Free mobile app
Click to expand...
Click to collapse
android wear working really well on build 4\1\15 .so i think ble is ok(not fast as on cm11)
How to turn off google search bar on the screen. Search in setting the bar button operation does.
Sorry don't quite understand the question. But if you are trying to get rid of the search bar on the homescreen you have to install another launcher like Nova Launcher
I can't take root in this rom, I flashed supersu from recovery but when i turned on the device used to say that i had not root permissions, I noticed that the ram was also neatly full. Now i reflashed the rom and it is back to normal. Can you help? Sorry for my english.
Busaton said:
I can't take root in this rom, I flashed supersu from recovery but when i turned on the device used to say that i had not root permissions, I noticed that the ram was also neatly full. Now i reflashed the rom and it is back to normal. Can you help? Sorry for my english.
Click to expand...
Click to collapse
Did U try this package (flashable)? http://download.chainfire.eu/641/SuperSU/UPDATE-SuperSU-v2.40.zip
for me working great.
Stupid question but i cant flash WerewolfJB v10 kernel and Mourta 9.02 without problems.
On WerewolfJB i dont have network data, but on Mourta kernel i have problem with Dialer (cant open apk, only FC)
On stock kernel i dont have any problems.
damru said:
Did U try this package (flashable)? http://download.chainfire.eu/641/SuperSU/UPDATE-SuperSU-v2.40.zip
for me working great.
Stupid question but i cant flash WerewolfJB v10 kernel and Mourta 9.02 without problems.
On WerewolfJB i dont have network data, but on Mourta kernel i have problem with Dialer (cant open apk, only FC)
On stock kernel i dont have any problems.
Click to expand...
Click to collapse
Ok
thanks, I had flashed a version oldest, now works fine : D
gogreous rom! fast , smooth and no bugs at all for me
gratified to see that our p880 has L now , flashed the mourta kernal and got 23758 on benchmark!
Battery drain
I love this ROM - the best I had to date, but unfortunately I have enormous issue with battery drain. Before flashing, batery life was average and I could use it for few hours straight. But now when I use the phone it can even drain 20% within 10 minutes. When the phone is sleeping it drains battery normally. When I used CPU Spy it showed that the phone on awake mode is using almost all the time full CPU power. I'm using baseband LGP880AT-00-V20b-EUR-XXX-JUL-17-2013. Also the phone is heating very much. Which also makes me concerned.
I never had issues like this on other custom roms. I also use the ROM from January 6. If you can please help - I really like this ROM, but if nothing can't be done I will have to go back to something else.
Busaton said:
I can't take root in this rom, I flashed supersu from recovery but when i turned on the device used to say that i had not root permissions, I noticed that the ram was also neatly full. Now i reflashed the rom and it is back to normal. Can you help? Sorry for my english.
Click to expand...
Click to collapse
You need to enable root in settings/developer options. Don't install any superuser-app. Superuser access doesn't require an app now, it's been tied to privacy guard on latest build.
I have the same issues
I can't start outgoing calls. When is start a call the phone says call can't started. Incoming calls working
Whats kernel best fit for Euphoria-OS 1.0-beta Unofficial?
thank you:laugh:
I encounter in last build and on latest build a black screen when i answer a call.
and i cant hear any voice on when i answer
need to pull the battery to back to normal.
everything is fine on me .. i notice a heat on CPU but minimal.
i reduce Max Freq to 1100mhz to reduce heating problem.
signal is working but it has a "!" ? dont know what is that.
and anyone try the Cyiodak Kernel? that is the best kernel on LS Rom
baseband v20B euro
Mobile Data and Outgoing Calls
Under the Version of the 4th January I had the Problem that i could make any outgoing calls or use Mobile Data. Wifi, aswell as, sending and recieving SMS and recieving calls worked fine. After i upgraded to the Version of the 6th January i had the same Problem.
Then I wiped data etc. and installed the Version of the 6th January directly. After that I had the Problem that my SIM-Card locked itself every 1 or 2 minutes so I had to enter my PIN over and over again. After that i did another clean install with the Version of the 4th January. Same Problem with Mobile Data and Calls as I had the first time.
Today i tested the Version of the 8th of January. The same problem occured with Calls and Mobile Data and I althought could not connect my phone with my Laptop via Bluetooth.
Does anyone have a solution for me?
I found one minor problem which i althought post here because I can not post in the Dev.-Thread (I am new here, therefor i can only post here).
The camera works fine, in making photos and making videos but it is getting laggy when I change from back- to frontcamera.
Overall the ROM seemed pretty smooth and as far as I can tell the rest works fine and I would love to use it as my everyday ROM but I can not resign on doing calls and using Mobile Data.
Do you need a log? I made one but I am not sure how i should send it to you.
Anyway, thank you for the great work!