If anyone know where I can get the stock firmware for this devices please let me know. I search the forum and all the links are deads, Sammobile doesn't have firmware for this model.
Thank you
may I know why you want to return to stock T849?
It was a Froyo rom. Any special need to get it back to stock stock?
priyana said:
may I know why you want to return to stock T849?
It was a Froyo rom. Any special need to get it back to stock stock?
Click to expand...
Click to collapse
it was hard bricked, got jtag, now i need to reload it.
I found threads on here but link with multiupload are dead
then no need to
Just use Overcome guide to load Gingerbread ROM
Go to overcome site
Http://www.teamovercome.net
Read the guide,
Missing pictures can be seen here.
http://forum.xda-developers.com/showthread.php?p=20974872
Follow the picture step by step.
Basically to restock:
Download GB-stock-safe-v5.zip, unzip it and and flash with ODIN according to the guide.
Stop there and you will have Gingerbread JQ1
You can continue with the rest, and you will get Overcome 4.1 and you won't regret.
From there you can then try AOKP or CM9, all requires you to have Overcome Kernel with its CWM recovery to flash.
the package include a T-mobile modem to choose
it will let you have 3G in T-mobile network but no voice call.
If you use the JPZ modem that is also included, you can get voice call but EDGE speed for internet.
thank you will do that and report back
i tried to reload per the instruction, it ran for about 3 minutes near the end it "FAILED"
Hmm no idea.
Hope it is not a locked bootloader.
Can you try it again?
You are using Odin 1.7 that is included in the gb stock safe, right?
Sent from my GT-I9300 using xda app-developers app
priyana said:
Hmm no idea.
Hope it is not a locked bootloader.
Can you try it again?
You are using Odin 1.7 that is included in the gb stock safe, right?
Sent from my GT-I9300 using xda app-developers app
Click to expand...
Click to collapse
Im using 1.7 that came with the package, tried 5 times already
Yes, may be i should let you know how the device bricked
I accepted the OTA update after reboot the phone never turn back on .
Could it be that the fw im trying to update is older then the OTA caused it to fail ?
I doubt the version matters, I am wondering if it is caused by broken NAND chip.
I have never encountered this before.
Let's have some crazy idea.
I am thinking of flashing cm9 or aokp mtd rom on it.
I myself am using Stimpz0r AOKP build 40.
Can you download it and put in external SD card,
And also the gapps-ics.
Just get it ready.
While for the tab, flash overcome kernel 4.0 tar as per the guide, as if it was a successful restock.
Once the kernel is flashed, force it power off.
Then try to boot to recovery.
If that works, try flash the ICS rom and see if it works.
You need to flash it twice, as first one converts to mtd.
Second flash will install.
Hopefully it boots.
Sent from my GT-P1000 using xda app-developers app
I flashed the kernel now it able to boot to the galaxy tab then the android animate but it in a boot loop at the android. I can't go to recovery, that's Vol Up + Power correct ?
i was able to install CM9 but getting "Encryption Unsuccessful" error after boot
I tried to wipe data/factory reset and got the following error:
format_volume: make_extf4fs failed on /dev/block/mmcblk0p2
probably bad block where this partion is located that why it failed when tried to flash Overcome rom.
there is a tool to relocate this partion to a different block and hopefully it work? do you know such tool ?
I have never come across such tool.
There is a thread that discuss about bad internal sdcard, and using external SD instead.
By you have to open up the tab and desolder the NAND chip.
Sent from my GT-P1000 using xda app-developers app
this tool
http://forum.xda-developers.com/showpost.php?p=26285877&postcount=12
Oh repartition.
Should be easier since we are in mtd now.
I am not one, but the devs are good at mtd partition.
Maybe they can help you rearrange the partition do that you get smaller but usable /data
Sent from my GT-P1000 using xda app-developers app
am sorry but how can i get the dev to help?
if you could, please print the partition table of your device ? Ill try to re-create while waiting for the dev to help
Thanks
I dont know if we have recovery with parted.
but this is my fdisk
Sent from my GT-P1000 using xda app-developers app
Related
Hi all.
I picked up a used cappy that was "bricked" for cheap. It simply bootlooped on the AT&T screen.
Took it home, hooked it up and odin'ed stock kfc1 with bootloaders onto it. I have now tried every one click Odin or hiemdal gb file I can find, and it just sits at the att screen. Download mode works fine, recovery doesn't.
Flashing a gb kernel with cwm through odin works, but still no boot or recovery.
What am I missing?
Thanks!
Sent from my SAMSUNG-SGH-I957 using Tapatalk
you might want to try flashing a stock ROM with Odin, I'm sure you can find some around the forum =) It's really hard to hard brick the cappy, and since download mode works all you need is a working ROM, so yeah, just go with a stock ROM first
A stock ROM is what I've been attempting to do. I have tried all the 1 click stock packages in the sticky in the development forum..
Sent from my SAMSUNG-SGH-I777 using XDA
Try not using a 1 click
I tried that as well.
I flashed one at a time (meaning just the bootloader, then just the kernel, and finally the rom itself), as well as everything at once.
Proper bootloaders flash fine, kernel flashes fine, and roms appear to flash fine.
Just failure to boot or recovery..
I'm at a loss..
Edit; autocorrect fail
Sent from my SAMSUNG-SGH-I777 using XDA
Sounds like the same problem I'm having, unfortunately I believe it's related to a bad internal sd partition and as of yet I've found no way to fix it
If you flash stock eclair, can you enter recovery?
That was the only recovery I was able to access, from there running adb shell, then dmesg I was able to see that the internalsd was corrupted or at least not mounting.
Still not able to enter recovery even on Eclaire.
I think Ill send it to Samsung USA and see what they say..
Sent from my SAMSUNG-SGH-I957 using XDA Premium HD app
I figured I would update this, I called Samsung and gave them my imei number and they stated it was still under warranty.
So I sent them the device.
The internal SD was corrupt or bad as stated on the invoice.
I have it back and it works free of charge!
Thanks Sammy!
Sent from my SAMSUNG-SGH-I777 using XDA
Galaxy note is stuck at boot screen after flashing the wrong rom. before its was Stock ICS germany
tried to flash again using pc odin .... but same
Tied to flash stock ICS but same
tried to flash gingeerbread but same
Installed Abbys kernal.
strange thing noted unable to perform full wipe from CWM.
full wipe word after ABys kernal installation.
please advise.
help needed.....
Tried to flash PIT and bootloader also but the results are same.
flashing the wrong rom? what rom did you flash ? more info woudl be nice
its was on Stock ICS , flashed note at&t custom rom hybrid
unable to flash wipe rom.... odin stuck at data.img
Well, what happened?
I am stuck on the boot screen as well.
Did you performed Full Wipe on ICS Stock Rom ? If so then its unfortunate to say your note might be bricked.
I advise u stop flashing stuff when you clearly don't know what your doing.
Sent from My Omega powered beast, using Xparent ICS
qamarabbas277 said:
unable to flash wipe rom.... odin stuck at data.img
Click to expand...
Click to collapse
It is not a good sign. Looks like a case of superbrick to me due to emmc bug. Probably will need repartition with custom pit or adb.
Sent from my phone
forest1971 said:
It is not a good sign. Looks like a case of superbrick to me due to emmc bug. Probably will need repartition with custom pit or adb.
Sent from my phone
Click to expand...
Click to collapse
+1, you're bricked. Either repartition or claim replacement motherboard.
Sent from my GT-N7000 using xda premium
I wonder why people come here after damaging the device instead of before...
I don't even buy a device before reading a lot about it here in xda..
Sent from my GT-N7000 using Tapatalk 2
Hi guys,
I normally try and work this stuff out for myself (as you can tell by my join date and my post count) but this has me stumped..
I was attempting to change ICS rome and somewhere in the process something went wrong...
After many unsuccessful attempts of flashing, stock ICS & GB, Abyss.. I checked the partions for errors and found the actual size of p-10 was different than the reported size by 1kb.
So, tried the e2fsck fix- it reported that it had corrected some errors.. I tried flashing again and agin- no success.
I then deleted the partitions, recreated them and reformatted in CWM. ADB reports no errors on any partition. When I try to load an ICS rom, it installs then hangs when it gets to the screen where you select the language.
I can successfully install a GB rom, but after a couple of minutes I start getting errors- then the affected app closes.
Any ideas?
Thanks
bump... Anyone?
shawnthecableguy said:
bump... Anyone?
Click to expand...
Click to collapse
Which ics rom were you on originally before you tried flashing to which ics rom? Did you perform any wipes while on ics? Does sound like you have a good understanding of emmc bug and partitioning so forgive me if this all seems mundane.
Sent from my GT-N7000 using xda premium
shawnthecableguy said:
Hi guys,
I normally try and work this stuff out for myself (as you can tell by my join date and my post count) but this has me stumped..
I was attempting to change ICS rome and somewhere in the process something went wrong...
After many unsuccessful attempts of flashing, stock ICS & GB, Abyss.. I checked the partions for errors and found the actual size of p-10 was different than the reported size by 1kb.
So, tried the e2fsck fix- it reported that it had corrected some errors.. I tried flashing again and agin- no success.
I then deleted the partitions, recreated them and reformatted in CWM. ADB reports no errors on any partition. When I try to load an ICS rom, it installs then hangs when it gets to the screen where you select the language.
I can successfully install a GB rom, but after a couple of minutes I start getting errors- then the affected app closes.
Any ideas?
Thanks
Click to expand...
Click to collapse
Download emmc app from market and perform a memory test... Get a rooted gb rom as it needs root access.. And skip all kinds of setup at startup once you flash the gb(rooted) rom
Sent from my GT-N7000 using xda premium
msedek said:
Download emmc app from market and perform a memory test... Get a rooted gb rom as it needs root access.. And skip all kinds of setup at startup once you flash the gb(rooted) rom
Sent from my GT-N7000 using xda premium
Click to expand...
Click to collapse
+1 for this approach, it sounds like there's lingering issues on the chip.
Sent from my GT-N7000 using xda premium
SpyderTracks said:
Which ics rom were you on originally before you tried flashing to which ics rom? Did you perform any wipes while on ics? Does sound like you have a good understanding of emmc bug and partitioning so forgive me if this all seems mundane.
Sent from my GT-N7000 using xda premium
Click to expand...
Click to collapse
I was on N7000XXLRB, Kernel Version 3.0.15-N7000XXLRG, and Build number IMM76D.XXLRG. Tried to go to AlBa rom, flashed Abyss, wiped cache/data in the CWM recovery and flashed the rom in CWM recovery...
I can successfully flash a stock GB rom with PC Odin, but it hangs on the boot screen( so I can't install dmmc test).
I have tried everything I can think of, just waiting on a jig to come in the mail so I can reset my counter for warranty
If you find a solution please post it.
I think i have the same problem. I posted it in general ( can anybody move it over here? I think this was wrong. Sorry i panicked. )
It's called permantly rebooting after flashing cm9.
I pledge for a solution.
Sent from my HTC Desire using xda premium
shawnthecableguy said:
I was on N7000XXLRB, Kernel Version 3.0.15-N7000XXLRG, and Build number IMM76D.XXLRG. Tried to go to AlBa rom, flashed Abyss, wiped cache/data in the CWM recovery and flashed the rom in CWM recovery...
I can successfully flash a stock GB rom with PC Odin, but it hangs on the boot screen( so I can't install dmmc test).
I have tried everything I can think of, just waiting on a jig to come in the mail so I can reset my counter for warranty
Click to expand...
Click to collapse
If you are on stock gb go recovery (volume up+home+pwer) wipe data and reboot
Sent from my GT-N7000 using xda premium
msedek said:
If you are on stock gb go recovery (volume up+home+pwer) wipe data and reboot
Sent from my GT-N7000 using xda premium
Click to expand...
Click to collapse
Yeah, tried that....
I have tried everything I can think of. The Odin flash does'nt spit out an error... I can flash anything successfully but nothing actually boots?
Hello Geeks.
Now I'm a noob in xda.
I want to put cwm into my GT-P1000
Where can i find it ?
Thanks
markie1998 said:
Hello Geeks.
Now I'm a noob in xda.
I want to put cwm into my GT-P1000
Where can i find it ?
Thanks
Click to expand...
Click to collapse
I got it when i rooted my tab.
I think root access is required for cwm btw...
now i rooted by super1rootclick.
and now i can access recovery mode.
that's mean cwn is not require anymore ?
You can always access recovery mode.
The stock 3e recovery.
But you want custom recovery, ClockWorkMod recovery being the only one for tab.
Flashing cf-root kernel will give you cwm.
But staying on froyo is not so good, with some having protected boot loader.
Why not just find overcome rom in dev thread and flash it.
You won't regret.
Sent from my GT-P1000 using XDA
ok i'll find it
now i want to test an AOKP ICS rom.
and i not sure if i flash it without cwm on my tab.
I'm a noob here. sorry everyone.
Read this thread.
http://forum.xda-developers.com/showthread.php?t=1626825
This guy wanted to do the same thing.
Sent from my GT-P1000 using XDA
Thanks a lot for that link priyana! Now got a nice guide with pictures
The overcome guide works like a charm, used it on my GT-P1000. It's now running the AOKP ICS 4.0.4 build #36 nice and smooth.
After completing the full overcome guide you can simply flash the AOKP build with cwm.
Download this file:
http://www.4shared.com/zip/g-uW6vGt/CF-Root-TAB7_XX_OXA_JQ1-v33-CW.html
Also download odin v1.7 (google it). Boot your tab in download mode (turn off tab, then hold power button and volume down button simultaneously)
open odin and select the above mentioned file as pda
connect your tab to your pc
start flashing
you will get a rooted tab with cwm installed
please thank me if you found this useful
gogol1996 said:
Download this file:
http://www.4shared.com/zip/g-uW6vGt/CF-Root-TAB7_XX_OXA_JQ1-v33-CW.html
Also download odin v1.7 (google it). Boot your tab in download mode (turn off tab, then hold power button and volume down button simultaneously)
open odin and select the above mentioned file as pda
connect your tab to your pc
start flashing
you will get a rooted tab with cwm installed
please thank me if you found this useful
Click to expand...
Click to collapse
I tried this as I too was having difficulty booting into Clockwork and now my tab won't boot on at all. Someone please help. I don't know where to go ?
Try this as per my post in the thread.
Post back if you have problem.
Btw, you can still get to download mode?
http://forum.xda-developers.com/showthread.php?t=1791681
Basically you need to try flashing gb stock safe package from overcome using Odin.
Sent from my GT-I9300 using xda app-developers app
Hi Priyana,
Do you recommend I do the following but with gb stock safe ?
1) download overcome 4.0 kernel tar file and keep it in your PC
2) download aokp build 38 and gapps-ics from the link in aokp post. Put both on external SD card.
3) read the guide and jump to the part that guides you to flash overcome kernel.
Make sure Odin can see your tab and everything looks exactly like in the picture.
4) flash the overcome kernel and the tab will reboot. There will be a female robotic voice. Stimpz0r recommend no need to wait for finish. Just force power off the tab.
5) power up to recovery by pressing volume up and power button.
I find it a bit tricky sometimes, maybe the way I hold the button. But you will get there.
6) from cwm recovery, choose to install update from external SD card and browse to aokp zip file and install. Some message about checking bml/mtd and you see the tab reboot.
7) you may get a boot loop, it may not boot into recovery, or it may go direct back to recovery. If it does that it is normal.
First time coming from bml to mtd will do that.
Just flash aokp one more time.
You will notice the cwm is not the overcome one anymore. It looks similar but it is not. You will have to browse to internal SD card instead, because this recovery somehow calls your external SD as internal SD.
8) so flash aokp again, and when completed, flash gapps-ics
9) when completed just reboot and sit back and wait till it is done!
I see you came across my old post.
Yes, that should work. But download stimpz0r AOKP build 40.
The post was back when 38 was latest.
If the AOKP failed to flash, you need to go for entire gb stock safe though.
Go ahead try as per this AOKP install post and let me know if you have difficulty.
Sent from my GT-P1000 using xda app-developers app
Great , I am out of the endless boots I was having and now have Gingerbread installed. Bit behind the times though my tab is functional and bit more snappy then the old Froyo. If you have any ideas on how to install Jellybean or any other roms you recommend for GT-P1000 I would really interested. Thanks again champion you have saved me alot of heartache.
Go for AOKP!
you have the instruction laid out here, nothing stopping you.
And if you are bored you can try cm10.
From now on the steps are the same.
Boot to cwm, wipe data, cache, and dalvik, and flash the rom and the gapps.
Please note gapps for ics is different from gapps for jb.
Btw, this is the many times I see cf-root way fails while overcome method works.
Thanks to team overcome we have such a reliable method to get cwm recovery.
Sent from my GT-P1000 using xda app-developers app
I have the rom and gapps from this link http://www.androidauthority.com/gal...-4-1-1-jelly-bean-cyanogenmod-10-cm10-106995/ but I don't think I have clockwork installed as my recovery looks stock. I'm not too sure on where to go from here asthus where I kind of got stuck last time.
You have the 9 steps I wrote.
From step 3 to 5,
At the end of step 5 you will have cwm.
Which one you didn't get?
The guide? I was referring to Overcome guide.
Jump here for the kernel and the guide:
Here is the kernel (tar format for Odin, zip isn't the one you want I guess)
http://forum.xda-developers.com/showpost.php?p=27801159&postcount=8
and guide here
https://docs.google.com/file/d/0B7k...EyNS00Yzg5LWE0MTktYmYyMjA1MThmYzQz/edit?pli=1
So, open the guide:
3) read the guide and jump to the part that guides you to flash overcome kernel.
Make sure Odin can see your tab and everything looks exactly like in the picture.
4) flash the overcome kernel and the tab will reboot. There will be a female robotic voice. Stimpz0r recommend no need to wait for finish. Just force power off the tab.
5) power up to recovery by pressing volume up and power button.
Sent from my GT-P1000 using xda app-developers app
Thanks I will give that at a go now but reading through the guide I forgot to flash the modem file. Am I able to do this seperately?
Don't worry.
The modem was for non mtd.
Once you flash AOKP and the mtd conversion takes place, all partitions are wiped out.
On second flash the rom is installed and jpz modem is included.
It will be just a file in /radio/modem.bin in MTD rom.
If you need to replace the modem in the future, just unpack a modem package and use root explorer to copy and paste the new modem file to overwrite the one there and reboot.
Sent from my GT-P1000 using xda app-developers app
Fantastic From Froyo To JB !
So let me get this right, If I want to change Rom in the future.
All I need to do now is boot up CWM Recovery then Flash Rom And Gapps and if anything goes wrong Flash GB Stock Safe through Odin in Download mode.
Can I ask which Rom you are using/prefer ?
This JellyBean Rom looks good but is not as responsive as GB also I'm having difficulty rotating in home screen.
Thankyou for all the information you have provided me.
You did see me mention AOKP many times, right? that is my favourite.
AOKP and CM9 are ICS.
CM10 and Paranoidandroid 1.99 are JB.
Btw,
don't forget to flash gapps.
Yes, most rom for ICS/JB here are MTD rom, so just do the wipes and flash from cwm.
Sent from my GT-P1000 using xda app-developers app
Hi!
So i figured i wanted to get of the faulty ics leak in order to keep my phone safe, but it seems I was able to do the exact oppsite...
I will try to make a detailed overview of what I did, here we go.
I was using Stunner on CLP5. Followed this guide to do the downgrade:
http://www.youtube.com/watch?v=jr3DDEh8vyc&list=UUlVIlK8QHZ2PFkXF97bA0lg&index=5&feature=plcp
What i did:
Flashed the Abyss kernel - rebooted
Wiped with the new recovery
Flashed rocketrom
Got stuck on bootloop. (I should've probably done another wipe here, am i right? )
After flashing Rocketrom, I once again got a new recovery, I figured I was on a safe kernel and recovery now so instead of trying wiping or a different rom, I was stupid enough to do a restore of a backup of a stock rom with root I had from December when i bought the phone.
This made everything even worse, my battery drained and I was unable to charge my phone through USB or 220v. Luckily I got my friend to charge my battery (same phone)
Booting up my phone agian, I was no longer able to acess recovery, but I still had acess to Download mode.
I flashed a stock GB rom successfully through PC Odin, and yet AGIAN I was stuck at bootloop. The file I flashed was a single .tar file. I didn't select update bootloader, should i try this? maybe re-ptartitioning?
I still have acess to download mode.
Has anyone got a clue how to fix this mess?
Thanks for all replies!
Tried different stock ROM and PIT partitioning, no luck so far
lameplx said:
Tried different stock ROM and PIT partitioning, no luck so far
Click to expand...
Click to collapse
Please, pit partitioning seems to get thrown out there like smarties but imo should only ever be used as a very last resort as a lot can go wrong.
Have you tried wiping cache and dalvik? Sorts out reboots 99 percent of the time.
Sent from my GT-N7000 using xda premium
SpyderTracks said:
Please, pit partitioning seems to get thrown out there like smarties but imo should only ever be used as a very last resort as a lot can go wrong.
Have you tried wiping cache and dalvik? Sorts out reboots 99 percent of the time.
Sent from my GT-N7000 using xda premium
Click to expand...
Click to collapse
I,m not able to enter recovery. UP+POWER+ MENU, right?
Stuck on bootloop on stock GB.
lameplx said:
I,m not able to enter recovery. UP+POWER+ MENU, right?
Stuck on bootloop on stock GB.
Click to expand...
Click to collapse
volume up+power+home
Wait until it reboots
Sent from my GT-N7000 using xda premium
Hg42's pit files and a stock gb rom unbricked my phone, have you read forest 1971s guide i think it is?
Sent from my GT-N7000 using XDA Premium HD app
Mc_CuLLa said:
Hg42's pit files and a stock gb rom unbricked my phone, have you read forest 1971s guide i think it is?
Sent from my GT-N7000 using XDA Premium HD app
Click to expand...
Click to collapse
Solved the problem by downloading yet a another stock GB rom, this time with three files, instead of the one .tar file.
lameplx said:
Solved the problem by downloading yet a another stock GB rom, this time with three files, instead of the one .tar file.
Click to expand...
Click to collapse
Thats good to know...
lameplx said:
Solved the problem by downloading yet a another stock GB rom, this time with three files, instead of the one .tar file.
Click to expand...
Click to collapse
Well done
Sent from my GT-N7000 using xda premium
Hey there guys I'm hoping someone can help me! I have a 16gb P1000T (Australian Telstra version)
I was going through the motions of upgrading my tab from an ICS build to a JB build, which failed, I then tried to flash back the previous build with the same error. I tried numerous ROM's and versions with nothing working (I would always get a boot loop) Eventually it stopped booting into even the CWM recovery mode. I then optioned to restock, I now cannot access the recovery mode no matter what kernel or recovery I flash or how. I can only get the stock ROM to boot and even then the ROM will automatically shutdown if the display is allowed to flick off...
So basically I'm at the current point;
- I can get a 'downloading' screen and 'successfully' flash almost anything using Heimdall or ODIN
- I cannot access any type of recovery mode... at all using power+vol down
- The only ROM that will boot is the stock one
- The stock ROM turns the tab off if the display is allowed to go to sleep
Any help would be greatly appreciated!
Cheers,
Hamish
Try overcome method
http://www.teamovercome.net
Read the guide,
https://docs.google.com/file/d/0B7k...EyNS00Yzg5LWE0MTktYmYyMjA1MThmYzQz/edit?pli=1
Missing pictures can be seen there.
Follow the picture step by step.
missing files at
http://tabfirmware.com/2012/01/romk...e-7-series-v4-1-0-♫-overcome-kernel-v4-0-0-♫/
Jump here for the kernel
Here is the kernel (tar format for Odin, zip isn't the one you want I guess)
http://forum.xda-developers.com/showpost.php?p=27801159&postcount=8
Sent from my GT-P1000 using xda app-developers app
Since you can go to download mode, i can assure you that you have not bricked your tab, unless you have messed with the partitions. i do not know much about cdma tabs, but you have not bricked your tab
I think I may have inadvertently messed with the permissions - The overcome method doesn't work - same issue over and over. Something about MTD ROMs vs non-MTD? I'm not sure what they mean, but I think I may have gone from one to the other without restocking?
Also the tab runs on GSM 850/2100, not CDMA.
Can you elaborate which part of overcome method fails?
The first part is flashing gb stock safe.
You need to tick repartition.
Did you get that done successfully and tab boot to stock gb nicely? Or still the screen off and it is powered off again.
Sent from my GT-I9300 using xda app-developers app
Hi Priyana, I get a nice stock GB, but as soon as I try and root, I can't boot or enter recovery - I'm trying again now.
From fresh stock.
Just boot to download mode, and flash overcome kernel using Odin.
Once done, the tab reboot, ignore it, just force it off.
Then boot to the new recovery.
And immediate flash ics rom. You need to do this twice.
Then flash gapps.
Then reboot to ics.
I have done this so many times, using Odin or heimdall. And guides so many people doing it. Works all the time.
Sent from my GT-P1000 using xda app-developers app
I eventually got it to work - **** knows what I did though lol cheers!
Try overcome method
Sent from my GT-P1000 using xda app-developers app