Hello Geeks.
Now I'm a noob in xda.
I want to put cwm into my GT-P1000
Where can i find it ?
Thanks
markie1998 said:
Hello Geeks.
Now I'm a noob in xda.
I want to put cwm into my GT-P1000
Where can i find it ?
Thanks
Click to expand...
Click to collapse
I got it when i rooted my tab.
I think root access is required for cwm btw...
now i rooted by super1rootclick.
and now i can access recovery mode.
that's mean cwn is not require anymore ?
You can always access recovery mode.
The stock 3e recovery.
But you want custom recovery, ClockWorkMod recovery being the only one for tab.
Flashing cf-root kernel will give you cwm.
But staying on froyo is not so good, with some having protected boot loader.
Why not just find overcome rom in dev thread and flash it.
You won't regret.
Sent from my GT-P1000 using XDA
ok i'll find it
now i want to test an AOKP ICS rom.
and i not sure if i flash it without cwm on my tab.
I'm a noob here. sorry everyone.
Read this thread.
http://forum.xda-developers.com/showthread.php?t=1626825
This guy wanted to do the same thing.
Sent from my GT-P1000 using XDA
Thanks a lot for that link priyana! Now got a nice guide with pictures
The overcome guide works like a charm, used it on my GT-P1000. It's now running the AOKP ICS 4.0.4 build #36 nice and smooth.
After completing the full overcome guide you can simply flash the AOKP build with cwm.
Download this file:
http://www.4shared.com/zip/g-uW6vGt/CF-Root-TAB7_XX_OXA_JQ1-v33-CW.html
Also download odin v1.7 (google it). Boot your tab in download mode (turn off tab, then hold power button and volume down button simultaneously)
open odin and select the above mentioned file as pda
connect your tab to your pc
start flashing
you will get a rooted tab with cwm installed
please thank me if you found this useful
gogol1996 said:
Download this file:
http://www.4shared.com/zip/g-uW6vGt/CF-Root-TAB7_XX_OXA_JQ1-v33-CW.html
Also download odin v1.7 (google it). Boot your tab in download mode (turn off tab, then hold power button and volume down button simultaneously)
open odin and select the above mentioned file as pda
connect your tab to your pc
start flashing
you will get a rooted tab with cwm installed
please thank me if you found this useful
Click to expand...
Click to collapse
I tried this as I too was having difficulty booting into Clockwork and now my tab won't boot on at all. Someone please help. I don't know where to go ?
Try this as per my post in the thread.
Post back if you have problem.
Btw, you can still get to download mode?
http://forum.xda-developers.com/showthread.php?t=1791681
Basically you need to try flashing gb stock safe package from overcome using Odin.
Sent from my GT-I9300 using xda app-developers app
Hi Priyana,
Do you recommend I do the following but with gb stock safe ?
1) download overcome 4.0 kernel tar file and keep it in your PC
2) download aokp build 38 and gapps-ics from the link in aokp post. Put both on external SD card.
3) read the guide and jump to the part that guides you to flash overcome kernel.
Make sure Odin can see your tab and everything looks exactly like in the picture.
4) flash the overcome kernel and the tab will reboot. There will be a female robotic voice. Stimpz0r recommend no need to wait for finish. Just force power off the tab.
5) power up to recovery by pressing volume up and power button.
I find it a bit tricky sometimes, maybe the way I hold the button. But you will get there.
6) from cwm recovery, choose to install update from external SD card and browse to aokp zip file and install. Some message about checking bml/mtd and you see the tab reboot.
7) you may get a boot loop, it may not boot into recovery, or it may go direct back to recovery. If it does that it is normal.
First time coming from bml to mtd will do that.
Just flash aokp one more time.
You will notice the cwm is not the overcome one anymore. It looks similar but it is not. You will have to browse to internal SD card instead, because this recovery somehow calls your external SD as internal SD.
8) so flash aokp again, and when completed, flash gapps-ics
9) when completed just reboot and sit back and wait till it is done!
I see you came across my old post.
Yes, that should work. But download stimpz0r AOKP build 40.
The post was back when 38 was latest.
If the AOKP failed to flash, you need to go for entire gb stock safe though.
Go ahead try as per this AOKP install post and let me know if you have difficulty.
Sent from my GT-P1000 using xda app-developers app
Great , I am out of the endless boots I was having and now have Gingerbread installed. Bit behind the times though my tab is functional and bit more snappy then the old Froyo. If you have any ideas on how to install Jellybean or any other roms you recommend for GT-P1000 I would really interested. Thanks again champion you have saved me alot of heartache.
Go for AOKP!
you have the instruction laid out here, nothing stopping you.
And if you are bored you can try cm10.
From now on the steps are the same.
Boot to cwm, wipe data, cache, and dalvik, and flash the rom and the gapps.
Please note gapps for ics is different from gapps for jb.
Btw, this is the many times I see cf-root way fails while overcome method works.
Thanks to team overcome we have such a reliable method to get cwm recovery.
Sent from my GT-P1000 using xda app-developers app
I have the rom and gapps from this link http://www.androidauthority.com/gal...-4-1-1-jelly-bean-cyanogenmod-10-cm10-106995/ but I don't think I have clockwork installed as my recovery looks stock. I'm not too sure on where to go from here asthus where I kind of got stuck last time.
You have the 9 steps I wrote.
From step 3 to 5,
At the end of step 5 you will have cwm.
Which one you didn't get?
The guide? I was referring to Overcome guide.
Jump here for the kernel and the guide:
Here is the kernel (tar format for Odin, zip isn't the one you want I guess)
http://forum.xda-developers.com/showpost.php?p=27801159&postcount=8
and guide here
https://docs.google.com/file/d/0B7k...EyNS00Yzg5LWE0MTktYmYyMjA1MThmYzQz/edit?pli=1
So, open the guide:
3) read the guide and jump to the part that guides you to flash overcome kernel.
Make sure Odin can see your tab and everything looks exactly like in the picture.
4) flash the overcome kernel and the tab will reboot. There will be a female robotic voice. Stimpz0r recommend no need to wait for finish. Just force power off the tab.
5) power up to recovery by pressing volume up and power button.
Sent from my GT-P1000 using xda app-developers app
Thanks I will give that at a go now but reading through the guide I forgot to flash the modem file. Am I able to do this seperately?
Don't worry.
The modem was for non mtd.
Once you flash AOKP and the mtd conversion takes place, all partitions are wiped out.
On second flash the rom is installed and jpz modem is included.
It will be just a file in /radio/modem.bin in MTD rom.
If you need to replace the modem in the future, just unpack a modem package and use root explorer to copy and paste the new modem file to overwrite the one there and reboot.
Sent from my GT-P1000 using xda app-developers app
Fantastic From Froyo To JB !
So let me get this right, If I want to change Rom in the future.
All I need to do now is boot up CWM Recovery then Flash Rom And Gapps and if anything goes wrong Flash GB Stock Safe through Odin in Download mode.
Can I ask which Rom you are using/prefer ?
This JellyBean Rom looks good but is not as responsive as GB also I'm having difficulty rotating in home screen.
Thankyou for all the information you have provided me.
You did see me mention AOKP many times, right? that is my favourite.
AOKP and CM9 are ICS.
CM10 and Paranoidandroid 1.99 are JB.
Btw,
don't forget to flash gapps.
Yes, most rom for ICS/JB here are MTD rom, so just do the wipes and flash from cwm.
Sent from my GT-P1000 using xda app-developers app
Related
HI team,
I had the ICS installed using AOKP build 31. I had issues with the SD card not reading and majorly that i did not find the file explorer option on the phone. I kept searching for that option and could not find it anywhere. Later thought of downgrading to Humber OS's version on ICS. On bot the times i had it flashed with teh same Kernel from Humber OS. The second time i used Gapps thats little older hoping for file explorer. Once i installed the other ICS, the phone just hung and not responding at all.
Can somebody help? Do we call this bricking?
WHere Does it freeze? on the GalaxyTab screen or on the Boot Animation Screen?
Have you done Factory Reset Wipe and Cache data wipe? The solution may be as simple as doing it on CWM.
Note:
For the File explorer, HumBerOS' ICS also does not have File Explorer. You need to install Root Explorer to access your External SDCard, under emmc,
or under mnt/emmc folder in root. All these are written in each respective threads, if your read carefully you should've found it before you decided to change from AOKP to HumberOS.
Cheers.
yappoe said:
WHere Does it freeze? on the GalaxyTab screen or on the Boot Animation Screen?
Have you done Factory Reset Wipe and Cache data wipe? The solution may be as simple as doing it on CWM.
Note:
For the File explorer, HumBerOS' ICS also does not have File Explorer. You need to install Root Explorer to access your External SDCard, under emmc,
or under mnt/emmc folder in root. All these are written in each respective threads, if your read carefully you should've found it before you decided to change from AOKP to HumberOS.
Cheers.
Click to expand...
Click to collapse
Currently, the phone does not boot up at all. With the start button 'Samsung Galaxy tab' shows up and goes all dark on me. The lights on the soft touch comes up and dies off in some time. I am unable to get to recovery, but comes to the download screen. So i tried to use Odin to get back to overcome or stock but the PC does not recognize the phone anymore. I used Kies to get the drivers but im not sure of the battery level to run odin. Other problem is that im not sure if the batt is getting charged when plugged. So im stuck nowhere..
Does it sound like its bricked? Is there anything that i can do??
hariharan321 said:
Currently, the phone does not boot up at all. With the start button 'Samsung Galaxy tab' shows up and goes all dark on me. The lights on the soft touch comes up and dies off in some time. I am unable to get to recovery, but comes to the download screen. So i tried to use Odin to get back to overcome or stock but the PC does not recognize the phone anymore. I used Kies to get the drivers but im not sure of the battery level to run odin. Other problem is that im not sure if the batt is getting charged when plugged. So im stuck nowhere..
Does it sound like its bricked? Is there anything that i can do??
Click to expand...
Click to collapse
Here's what you should do to make sure that is charged leave it charging turned off for about 14 to 16 hours.
Then with odin flash stock.
Best of luck a couple of times mine did the same and I could recover like this.
Thank you so much. Ill try doing that today. Ill leave it for charging overnight. Should i use the samfirmware stock or can i just use the GB STOCK SAFE V5 from Overcome experience?
But its great to know that it will be alright and you have brought it back to normal.
Yes. It worked and im on Overcome experience. Thanks a lot
I m on stock gb and want to install aokp ics on my tab.Do i need to flash the overcome gb stock safe file and then flash the overcome kernel or should i directly flash the kernel and then the overcome rom?
Sent from my GT-P1000 using Tapatalk
rock2702 said:
I m on stock gb and want to install aokp ics on my tab.Do i need to flash the overcome gb stock safe file and then flash the overcome kernel or should i directly flash the kernel and then the overcome rom?
Sent from my GT-P1000 using Tapatalk
Click to expand...
Click to collapse
Well if you want to go to overcome 4.10 you have to do just overcome kernel and then overcome Rom.
For AOKP ICS same thing but with the AOKP Rom.
Make sure that you are using a GTP1000 not P1000L/N.
You can run overcome and AOKP on those but you need diff kernels.
Best of luck.
Thanks a million, im back on overcome experience. I had the tab charged for the whole night,then went on with the procedure given at the overcome link. My tab woke up like a charm. Thank you so much for the assistance.
Now that i tasted a bit of ics just cant get over it. I would like to install aokp again. As per the forum i can load aokp with the kernel given at humeros site right. Can i try that? How will i get the file explorer once i have aokp installed? Aokp ics was a visual treat even though i managed to mess that up. Please help me on how to access my sd card when i flash aokp. Hiw to get my titanium back up run for restoring my apps? I did not find a market app also , can i just download it and run using apk file?
If you read aokp Sgt thread carefully
- the rom includes kernel for p1000
- you need to flash gapps to get Gmail and Google play
- external sdcard is now /mnt/emmc
Sent from my GT-P1000 using XDA
snowman74 said:
Well if you want to go to overcome 4.10 you have to do just overcome kernel and then overcome Rom.
For AOKP ICS same thing but with the AOKP Rom.
Make sure that you are using a GTP1000 not P1000L/N.
You can run overcome and AOKP on those but you need diff kernels.
Best of luck.
Click to expand...
Click to collapse
I directly wanna get aokp ics on my tab which is on stock gb.In the aokp dev post it is written that sm1 coming from a stock/rfs rom should first follow the overcome guide and then the other steps.
Does it mean that for getting aokp i have to first flash overcome and then follow the steps to get aokp on the tab?
As there is no cwm recovery for the tab,is it possible to flash aokp via odin when i m on stock gb rom?
Sent from my GT-P1000 using Tapatalk
No, it is not possible via Odin now.
I finally was able to install aokp rom on my galaxy tab.
I wasn't able to find stock video player in this rom.Isn't it included?Also the app called galaxy tab settings force closes every time I open it.Is it a common problem?
Sent from my GT-P1000 using Tapatalk 2 Beta-6
Oh god, aokp ics from is heavenly. I had it installed from overcome. The gapps trouble vanished with re flashing after first boot. Now all my Google apps are back. I have titanium back up fired up and I'm all set. Along with the camera fix, this is the best and I'm at cloud... wow wow... I'm all amazed this ice cream sandwich is so yummy....
WIFI problem
hi guys
i have problem with wifi in AOKP.i have update the last kernel of humberos and i do anythink they told to do.But i cant connect to my wifi.
i test it without the simcard and it work perfectly but when i insert the simcard the wifi doesn't work anymore.
after that i test the wifi-hotspot and the hotspot work fine.
i wonder what is the problem!!!!!
Hi,
device info:-
samsung galaxy tab p1000
running 2.3.3 stock firmware
rooted with doomslord kit
i am new to flashing an android
i have downloaded and decrypted a firmware from checkfus downloader
question:-
1. Is the overcome's stock safe v5 zip and the checkfus downloaded zip same???
Please reply asap.
Wholehearted thanks for your help
I think checkfus downloads are many. You can't compare. They differ even amongst each other.
Overcome stock safe zip is not just a rom.
It is a package containing Odin, drivers, and modem radios, as well as JQ1 stock rom.
Sent from my GT-P1000 using XDA
Thanks Priyana,
heard a lot about you, great helper and developer. just need a little help...
i am a complete newbie in flashing android. matter of fact i havent even once rebooted my phone into download or recovery mode.
i did a factory reset today...i need a complete step by step guide to flash overcome kernel 4.0.0 via mobile odin and aokp build 38 later.....
please help....
thanks
When you say factory reset do you mean the "Factory data reset" under privacy? or did you successfully install the Safe-Stock-Rom from Overcome's website?
There is a complete guide to how go from stock rom to Overcome 4.1.0 here: http://www.teamovercome.net/p1000/?page_id=17
I successfully completed it the other day and works perfectly on my Galaxy Tab.
SGTABHI said:
Thanks Priyana,
heard a lot about you, great helper and developer. just need a little help...
i am a complete newbie in flashing android. matter of fact i havent even once rebooted my phone into download or recovery mode.
i did a factory reset today...i need a complete step by step guide to flash overcome kernel 4.0.0 via mobile odin and aokp build 38 later.....
please help....
thanks
Click to expand...
Click to collapse
Hi SGTABHI,
You have heard wrongly. I am not a dev, just a busy body trying to help
Dimitrix points rightly to overcome guide.
The images there are broken, so go here instead
Go to
http://forum.xda-developers.com/showthread.php?p=20974872
See the guy phlooke posted a cached copy of the overcome guide.
Download it, it is a .PNG graphic file.
Now, you don't need to go through the whole restocking. We only need an overcome kernel 4.0 so that you have cwm.
So,
1) download overcome 4.0 kernel tar file and keep it in your PC
2) download aokp build 38 and gapps-ics from the link in aokp post. Put both on external SD card.
3) read the guide and jump to the part that guides you to flash overcome kernel.
Make sure Odin can see your tab and everything looks exactly like in the picture.
4) flash the overcome kernel and the tab will reboot. There will be a female robotic voice. Stimpz0r recommend no need to wait for finish. Just force power off the tab.
5) power up to recovery by pressing volume up and power button.
I find it a bit tricky sometimes, maybe the way I hold the button. But you will get there.
6) from cwm recovery, choose to install update from external SD card and browse to aokp zip file and install. Some message about checking bml/mtd and you see the tab reboot.
7) you may get a boot loop, it may not boot into recovery, or it may go direct back to recovery. If it does that it is normal.
First time coming from bml to mtd will do that.
Just flash aokp one more time.
You will notice the cwm is not the overcome one anymore. It looks similar but it is not. You will have to browse to internal SD card instead, because this recovery somehow calls your external SD as internal SD.
8) so flash aokp again, and when completed, flash gapps-ics
9) when completed just reboot and sit back and wait till it is done!
Remember if anything go wrong you may have to restock to gb stock safe. But quite unlikely.
Good luck.
Sent from my GT-P1000 using XDA
I have just wasted quite a bit of your time. Seems like you are asking about Mobile Odin !
But anyway it should be the same.
Just put overcome kernel tar in sdcard and use mobile Odin to flash it.
I am not familiar with mobile Odin, but it should match closely to Odin.
One guy even told me it works for restocking to stock safe!
Sent from my GT-P1000 using XDA
i did a factory reset through privacy.....
thanks for helping.....is there any chance of bricking my tab
incase i brick it can i flash the checkfus downloaded via odin in download mode
thanks once again
Little chance to brick.
Brick only happens if you broke the boot loader.
Yes, I guess flashing checkfus download via Odin should kind if "restock".
Sent from my GT-P1000 using XDA
here is a complete tutorial of how to flash overcome with all the images on a pdf file, http://forum.xda-developers.com/showthread.php?t=1500820
Sent from my GT-P1000 using Tapatalk 2
priyana said:
Hi SGTABHI,
......
Now, you don't need to go through the whole restocking. We only need an overcome kernel 4.0 so that you have cwm.
So,
1) download overcome 4.0 kernel tar file and keep it in your PC
2) download aokp build 38 and gapps-ics from the link in aokp post. Put both on external SD card.
3) read the guide and jump to the part that guides you to flash overcome kernel.
Make sure Odin can see your tab and everything looks exactly like in the picture.
4) flash the overcome kernel and the tab will reboot. There will be a female robotic voice. Stimpz0r recommend no need to wait for finish. Just force power off the tab.
5) power up to recovery by pressing volume up and power button.
I find it a bit tricky sometimes, maybe the way I hold the button. But you will get there.
6) from cwm recovery, choose to install update from external SD card and browse to aokp zip file and install. Some message about checking bml/mtd and you see the tab reboot.
7) you may get a boot loop, it may not boot into recovery, or it may go direct back to recovery. If it does that it is normal.
First time coming from bml to mtd will do that.
Just flash aokp one more time.
You will notice the cwm is not the overcome one anymore. It looks similar but it is not. You will have to browse to internal SD card instead, because this recovery somehow calls your external SD as internal SD.
8) so flash aokp again, and when completed, flash gapps-ics
9) when completed just reboot and sit back and wait till it is done!
.....
Sent from my GT-P1000 using XDA
Click to expand...
Click to collapse
This is the BEST AOKP install instruction I've ever seen! I will bookmark this for reference just in case anyone need this.
Priyana, thanks a lot for the guidea mate, very helpful.
Thinking of flashing my Tab with CM9. Some questions though.
How easy will it be for me to revert from ICS straight back to Overcome? Can I just flash Overcome kernel again, then flash Overcome ROM?
Will that work?
Also quick question while we are here, how stable is ICS? Can it play 3D games like Fifa and Nova without crashing?
Cheers mate!
Sent from my GT-P1000 using xda premium
olyloh6696 said:
Priyana, thanks a lot for the guidea mate, very helpful.
Thinking of flashing my Tab with CM9. Some questions though.
How easy will it be for me to revert from ICS straight back to Overcome? Can I just flash Overcome kernel again, then flash Overcome ROM?
Will that work?
Also quick question while we are here, how stable is ICS? Can it play 3D games like Fifa and Nova without crashing?
Cheers mate!
Sent from my GT-P1000 using xda premium
Click to expand...
Click to collapse
No, you will need to do repartition with the correct pit file to go back to GB. You will need to do it via odin or heimdell.
ICS now is quite stable for daily use. but some lags in some 3d games.
Thanks a lot priyana...
I successfully updated my tab to aokp ics.....an everything is just fine and perfect.......only the first boot scared me to death as it took 5 mins but after that only 10 secs...thanks a ton
bluetooth receives every format except apk..... any solution?????
Some sort if security I think.
The only way is to rename it first.
I might be wrong.
Sent from my GT-P1000 using xda app-developers app
SGTABHI said:
Thanks a lot priyana...
I successfully updated my tab to aokp ics.....an everything is just fine and perfect.......only the first boot scared me to death as it took 5 mins but after that only 10 secs...thanks a ton
bluetooth receives every format except apk..... any solution?????
Click to expand...
Click to collapse
10 sec boot?? My tab takes 2-3 mins to boot: first 2 boot logos, then black screen(1.5 mins), then laggy boot animation (1 min). Is that normal? B#38
Sent from my GT-P1000 using Tapatalk 2
I found out a solution......use Bluetooth explorer by medieval soft....and install it on both android devices...the received and the sharing device....then open it's directory and it's done......
10 secs thing was written out of ecstasy..... but my tab takes no longer than 20 secs......
Priyana can you guide me about changing the default boot animation .....
Your guides are perfect....
Sent from my GT-P1000 using xda app-developers app
SGTABHI said:
I found out a solution......use Bluetooth explorer by medieval soft....and install it on both android devices...the received and the sharing device....then open it's directory and it's done......
10 secs thing was written out of ecstasy..... but my tab takes no longer than 20 secs......
Priyana can you guide me about changing the default boot animation .....
Your guides are perfect....
Sent from my GT-P1000 using xda app-developers app
Click to expand...
Click to collapse
Hi,
Sorry, I am not that well versed in boot animation.
But one member, yappoe, have done a few alternative animations and he posted them on theme sub forum.
You can have a look there.
Sent from my GT-P1000 using xda app-developers app
How can i remove status bar while playing games...i want them fullscreen...i tried enabling shadow mode...pls help
priyana said:
Hi,
Sorry, I am not that well versed in boot animation.
But one member, yappoe, have done a few alternative animations and he posted them on theme sub forum.
You can have a look there.
Sent from my GT-P1000 using xda app-developers app
Click to expand...
Click to collapse
As long as you installed AOKP SGT7 or CM9 correctly you shoul have root access.
1. Download Root Explorer from Google Play store if you don't have one yet.
2. Download the bootanimation zip file and rename it to bootanimation.zip
3. Using Root Explorer, go to /system/media folder. Change access to R/W by click the R/W button on the top.
4. Find and rename the original bootanimation.zip to origboot.zip.bak.
5. Move the new downloaded bootanimation.zip to /system/media
SGTABHI said:
How can i remove status bar while playing games...i want them fullscreen...i tried enabling shadow mode...pls help
Click to expand...
Click to collapse
IN AOKP SGT7:
1.Go to System Settings > Rom Manager> Navigation Bar > tick Auto hide.
This only work if the games or apps actually support auto full screen.
2. On home screen, Add > Shortcut > System UI >Toggle NavBar
This will allow you to manually do hide NavBar/status bar for full screen.
3. Go to System Settings > Rom Manager > Power Menu Options > tick Show Navigation Toggle. When you want full screen, just long press power button, you will notice new Navigation Bar Controls toggles. Press the power toggle under there.
The ebook app from original samsung doesn't work in aokp....app not installed......any solution....one of the best apps i've ever seen
Hey Guys If anyone can help i would Greatly Appreciate it !!! I cant seem to install any ICS custom Roms. I came from a Ginger Bread rooted stock rom. I used Odin to flash my N7000 to ICS 4.0.3 stock ( Baseband XXLPT-Build #XXPLY) got it rooted and now using Kernel Franco#5. I tried installing Kingdroid.V4 or RocketRom.V7 ICS roms by using Abyss Kernel4.2 at CWM. I followed every step on their Forums but for some reason at installing the rom, the flashing of installing it only took 15-20 seconds installing the rom and my phone states it "Completed" the install, once i restart the phone it stays on the "Samsung Note N700 Logo" what am i doing wrong ?? Can anyone help ?
This worked for me. From the stock ICS LQ2 , i flash CWM.zip + SU... .zip to get root, then flash a safe kernel, afterwards, I flashed the custom rom from CWM and worked for me. As long as the "safe ics kernel" has mmc_cap disabled, as it is said in the OP, than i just went for it , so all is good now without any flashing abyss... Hope this helps, or gives you a boost.
Cheers.
Check the videos in my sig....you should get the answers fir everything :good:
---------- Post added at 07:45 PM ---------- Previous post was at 07:43 PM ----------
deadly3kys said:
Hey Guys If anyone can help i would Greatly Appreciate it !!! I cant seem to install any ICS custom Roms. I came from a Ginger Bread rooted stock rom. I used Odin to flash my N7000 to ICS 4.0.3 stock ( Baseband XXLPT-Build #XXPLY) got it rooted and now using Kernel Franco#5. I tried installing Kingdroid.V4 or RocketRom.V7 ICS roms by using Abyss Kernel4.2 at CWM. I followed every step on their Forums but for some reason at installing the rom, the flashing of installing it only took 15-20 seconds installing the rom and my phone states it "Completed" the install, once i restart the phone it stays on the "Samsung Note N700 Logo" what am i doing wrong ?? Can anyone help ?
Click to expand...
Click to collapse
You have to installed them over a Stock Rooted GB rom...not ICS...
Hey thanks guys for the information. I will check this out once i get home. I hit the thanks button for the both of you's. Cheers
I got a video guide in my channel if you want to try it.
Sent from my GT-N7000 using xda app-developers app
Also, remember the issues around flashing with ICS ROMS especially if running the LPY kernel. The best guide I have found on how to do this is the one from the Rocket ROM team. Have pasted a link to the thread (scroll to the bottom of the page for process).
http://forum.xda-developers.com/showthread.php?t=1654838&highlight=rocket
shaolin95 said:
I got a video guide in my channel if you want to try it.
Sent from my GT-N7000 using xda app-developers app
Click to expand...
Click to collapse
Hey Guys, I got a custom recovery installed now by using Odin PC. But i still cant install a custom ics using Kernal Abyss 4.2 It installs but it took only 20seconds and the moment i restart my phone it stays stuck on the SamsungNoteGtN7000 logo again... blah sucks
deadly3kys said:
Hey Guys, I got a custom recovery installed now by using Odin PC. But i still cant install a custom ics using Kernal Abyss 4.2 It installs but it took only 20seconds and the moment i restart my phone it stays stuck on the SamsungNoteGtN7000 logo again... blah sucks
Click to expand...
Click to collapse
U can try flash cwm.zip..then straight flashing abyss (do not reboot to recovery after flash cwm.zip)..restart to system..when stuck in samsung logo press volume down+home button+power button to enter recovery..do full wipe and then flash rom. Reboot to system. Hope it works.
Sent from my GT-N7000 using xda premium
it seems i can only flash through odin when it comes to ics cutom roms... does anyone know on how to flash these roms through odin? since i cant find a way to convert these roms to md5 format for odin to recongize.
Thanks for the help but i tried that method and its still not installing the ics rom correctly...No one knows if this is possible to flash through odin ?
I face this problem before.. the GT-N7000 will just stay on n not go off for long long time
what i did.. when i see that screen stuck n i confirm it is stuck.. then i press vol up+power+home to reboot into recovery....
when rebooted u will see abssy 4.2 is load up.. from there you install rom n then reboot system..
it should work
Thai Damen said:
I face this problem before.. the GT-N7000 will just stay on n not go off for long long time
what i did.. when i see that screen stuck n i confirm it is stuck.. then i press vol up+power+home to reboot into recovery....
when rebooted u will see abssy 4.2 is load up.. from there you install rom n then reboot system..
it should work
Click to expand...
Click to collapse
I tried that method too but no luck. It installs but only took 15 seconds and it stated it was done installing, once rebooted it stood on the logo again. I have no clue as to why its not installing these ICS roms correctly.....
Litening rom does come with .tar.md5 format, maybe you can try flashing that wih PC Odin since you're comfortable with it. Link www.liteningrom.com.
1. Download the file .rar into your PC and unzip until you get .tar.md5
2. Flash using PC Odin. It will NOT trigger yellow triangle (I've tested it)
3. Your phone will reboot to STOCK recovery. Just select reboot system and WAIT. Kinda long...but just wait until it's done.
4. You can proceed to flash kernel with custom recovery by using Mobile Odin, e.g. speedmod, etc
deadly3kys said:
I tried that method too but no luck. It installs but only took 15 seconds and it stated it was done installing, once rebooted it stood on the logo again. I have no clue as to why its not installing these ICS roms correctly.....
Click to expand...
Click to collapse
might have to restore to stock n then start over again as it seems like problem is cause by data corruption.. you might have to redownload the rom n then clear cache n davlik n install rom..
abss work with stock rom Ginger.. if with ics it will always have the gt-n700 stuck screen
kopitalk said:
Litening rom does come with .tar.md5 format, maybe you can try flashing that wih PC Odin since you're comfortable with it. Link www.liteningrom.com.
1. Download the file .rar into your PC and unzip until you get .tar.md5
2. Flash using PC Odin. It will NOT trigger yellow triangle (I've tested it)
3. Your phone will reboot to STOCK recovery. Just select reboot system and WAIT. Kinda long...but just wait until it's done.
4. You can proceed to flash kernel with custom recovery by using Mobile Odin, e.g. speedmod, etc
Click to expand...
Click to collapse
Thanks kopitalk for the info. It worked like a charm through odin. I would of liked some of the Samsung galaxy S3 modifications on this rom but at least it worked like a charm with that Md5 File. Thanks button hit !! and thanks for the tip Thai Damen, Going back to ginger bread and starting from scratch is too much to do altogether lol
Question
Hey guys. Does anyone know any ICS roms out there that's flashable through Odin besides the lightning rom?
Question
Hey guys. Does anyone know any ICS roms out there that's flashable through Odin besides the lightning rom?
Can't anyone help ?
deadly3kys said:
Thanks for the help but i tried that method and its still not installing the ics rom correctly...No one knows if this is possible to flash through odin ?
Click to expand...
Click to collapse
Dude before you brick your phone.. Go download notecore kernel and flash it via pc odin... After that you will see a yellow triangle on the boot screen.. Do not worry about it for now..
Then in the boot screen press volume up+home+power once in CWM wipe data and reboot
Once booted in Android download triangle away app and install it then follow steps to remove the yellow triangle
After that download any desired rom.. As you are gonna be in a safe kernel (yes notecore its a safe kernel) follow all the developer's steps to install the desired rom
It will basically be put the rom in the internal sd, boot to cwm (power+volume up+home) wipe data /wipe cache, choose zip from internal sd and flash the rom
REMEMBER YOU CAN ONLY DO THIS FROM A SAFE KERNEL..
Sent from my GT-N7000 using Tapatalk 2
As far as I can see, you have some sort of corruption in your emmc or some other partition. If i were you, to be on the safe side i would have taken all the trouble to start again from scratch. Flashing a GB rom with Odin with a .pit file and re-partitioning enabled should wipe your note clean (dont worry no brick with pc odin) . Then flash a "safe" ics kernel either by pc odin (safer and you can remove the triangle and custom flash count by triangle away app) or by cwm.zip (use only once while flashing kernel). Then choose the custom ics rom that you want to install and flash it from the new kernel recovery (no need for abyss kernel etc) with full wipe (data,cache,dalvik). Also if you face problems go through this thread. http://forum.xda-developers.com/showthread.php?t=1732903
P.S. - I highly recommend starting from scratch by re-partitioning via Odin with correct pit file.
Press the thanks button if helped.
Hey there guys I'm hoping someone can help me! I have a 16gb P1000T (Australian Telstra version)
I was going through the motions of upgrading my tab from an ICS build to a JB build, which failed, I then tried to flash back the previous build with the same error. I tried numerous ROM's and versions with nothing working (I would always get a boot loop) Eventually it stopped booting into even the CWM recovery mode. I then optioned to restock, I now cannot access the recovery mode no matter what kernel or recovery I flash or how. I can only get the stock ROM to boot and even then the ROM will automatically shutdown if the display is allowed to flick off...
So basically I'm at the current point;
- I can get a 'downloading' screen and 'successfully' flash almost anything using Heimdall or ODIN
- I cannot access any type of recovery mode... at all using power+vol down
- The only ROM that will boot is the stock one
- The stock ROM turns the tab off if the display is allowed to go to sleep
Any help would be greatly appreciated!
Cheers,
Hamish
Try overcome method
http://www.teamovercome.net
Read the guide,
https://docs.google.com/file/d/0B7k...EyNS00Yzg5LWE0MTktYmYyMjA1MThmYzQz/edit?pli=1
Missing pictures can be seen there.
Follow the picture step by step.
missing files at
http://tabfirmware.com/2012/01/romk...e-7-series-v4-1-0-♫-overcome-kernel-v4-0-0-♫/
Jump here for the kernel
Here is the kernel (tar format for Odin, zip isn't the one you want I guess)
http://forum.xda-developers.com/showpost.php?p=27801159&postcount=8
Sent from my GT-P1000 using xda app-developers app
Since you can go to download mode, i can assure you that you have not bricked your tab, unless you have messed with the partitions. i do not know much about cdma tabs, but you have not bricked your tab
I think I may have inadvertently messed with the permissions - The overcome method doesn't work - same issue over and over. Something about MTD ROMs vs non-MTD? I'm not sure what they mean, but I think I may have gone from one to the other without restocking?
Also the tab runs on GSM 850/2100, not CDMA.
Can you elaborate which part of overcome method fails?
The first part is flashing gb stock safe.
You need to tick repartition.
Did you get that done successfully and tab boot to stock gb nicely? Or still the screen off and it is powered off again.
Sent from my GT-I9300 using xda app-developers app
Hi Priyana, I get a nice stock GB, but as soon as I try and root, I can't boot or enter recovery - I'm trying again now.
From fresh stock.
Just boot to download mode, and flash overcome kernel using Odin.
Once done, the tab reboot, ignore it, just force it off.
Then boot to the new recovery.
And immediate flash ics rom. You need to do this twice.
Then flash gapps.
Then reboot to ics.
I have done this so many times, using Odin or heimdall. And guides so many people doing it. Works all the time.
Sent from my GT-P1000 using xda app-developers app
I eventually got it to work - **** knows what I did though lol cheers!
Try overcome method
Sent from my GT-P1000 using xda app-developers app
Dear all.. please help! I was originally from the official CM10 nightly, but I found it was too slow. So I decided to revert back to Gingerbread AOSP (Cyanogenmod Future 7.2)
1) I installed as per normal, from CWM recovery, flash ROM, flash GAPPS, wipe data, cache and dalvik. I managed to enter until the ROM setup screen, where I was supposed to click on the Android logo, but everytime I did that, it always showed error with setup wizard..
2) So I went back to ROM installation instructions and saw that I was supposed to format system in CWM recovery. I did exactly that, but afterwards it was downhill.. i could not even go past the bootlogo (the galaxy tab 7 logo)...
3) afterwards I tried using format sdcard from CWM recovery, no change.
4) I tried to flash stock p1000 rom by ODIN, with repartition UNCHECKED --- it looked hopeful, i went past the SGT7 boot logo into the samsung logo.. but it was stuck there..
5) I tried flasing stock p1000 rom by ODIN, this time with repartition CHECKED --- no change...
I would really appreciate it someone could help me how I could recover my phone. When I flashed the stock samsung ROM, i lost CWM recovery also.. now I am on default recovery from Samsung.
Please help! Thanks a lot...
Use overcome method. See my signature.
Download the PDF guide and follow to the letter from page 7 to use Odin to restock.
The flash overcome kernel to get CWM, don't need to flash Overcome ROM itself.
Flash your CM7 instead.
priyana said:
Use overcome method. See my signature.
Download the PDF guide and follow to the letter from page 7 to use Odin to restock.
The flash overcome kernel to get CWM, don't need to flash Overcome ROM itself.
Flash your CM7 instead.
Click to expand...
Click to collapse
Priyana, thanks a lot! I will try your method. Do you think should I try the CM7 beta or cyanogen to 7.2 the future? I wonder why using either one, I could not get pass the Android setup screen.
Thx!
Sent from my GT-N8000 using xda premium
I have never use cm 7 or 7.2 myself.
Can't help much there.
Sent from my GT-P1000 using xda app-developers app