hey guys,, i seem to have stuffed the recovery of my phone,, i stupidly installed cwm on my phone without root, but when i reflashed with odin the stock recovery works but when i install cwm, it doesnt go into recovery
CWM doesn't require root!
Try to reflash a stock rom. Not the one package file but the whole rom.
---------------XDA Premium--------------
Don't be a noob. Be a newbie..!!
Details here.
___________________________________
i have tried, once i flash cwm it doesnt boot into recovery,, ill try redownload and see if that helps
finally got it to work, i found a odin flashable cwm and it now works
ok now that i have cwm semi working on my phone, its now very difficult install roms, the only rom i can get to work on my phone now is stock,,, i now cannot flash cwm from recovery otherwise i get cwm bootloop only flashing by odin works, all custom roms get bootloop no matter how many times i flash and wipe data/cache,, i think my phone is stuffed
You sure you're installing cwm and roms for your device? What model ace do you have? (Not the i model right?)
dxppxd said:
You sure you're installing cwm and roms for your device? What model ace do you have? (Not the i model right?)
Click to expand...
Click to collapse
yeah mate im sure, i know what im doing, but it just doesnt seem to work anymore lol,, i have the T model
Make sure it is Just the "S5830" Any other then your in the wrong thread.
Tbh The order i do it, Flash the latest stable stock rom Via odin, Flash update {Any Kernel} (On phone) Then Reboot into CWM To flash a rom.
JDMBrooksy said:
Make sure it is Just the "S5830" Any other then your in the wrong thread.
Tbh The order i do it, Flash the latest stable stock rom Via odin, Flash update {Any Kernel} (On phone) Then Reboot into CWM To flash a rom.
Click to expand...
Click to collapse
yes it is, im not a noobie,, done that too,, im trying to flash cm9 b10 now but its stuck at samsung, and yes i have done data wipe and cache wipe
Only way i can think of is:
Flash new software with Odin: http://www.4shared.com/rar/FCyxijg8/odin_s5830_package.html
Then flashing "CWMRecovery" {AttacthMent} as an update through stock recovery as an update
Then reboot into CWM Recovery To wipe data Etc Etc, Then flash what ever ROM you want..
please more info man really not helping.
JDMBrooksy said:
Only way i can think of is:
Flash new software with Odin: http://www.4shared.com/rar/FCyxijg8/odin_s5830_package.html
Then flashing "CWMRecovery" {AttacthMent} as an update through stock recovery as an update
Then reboot into CWM Recovery To wipe data Etc Etc, Then flash what ever ROM you want..
please more info man really not helping.
Click to expand...
Click to collapse
ok ill try to remember what i did to stuff the phone,, ,i flashed my phone with s5830xwkt7 the rooted and flashed cwm 5,, i went to flash a custom rom but chose the wrong one and took the battery out,,, booted into cwm and did a full wipe and flashed the custom rom,, tested the rom and went back to stock rom, done root and installed cwm 5 again then went to reboot back to cwm for flash oc kernel and it started to bootloop after the samsung logo,,, its all fixed for now but im sure it will happen again
winxuser said:
ok ill try to remember what i did to stuff the phone,, ,i flashed my phone with s5830xwkt7 the rooted and flashed cwm 5,, i went to flash a custom rom but chose the wrong one and took the battery out,,, booted into cwm and did a full wipe and flashed the custom rom,, tested the rom and went back to stock rom, done root and installed cwm 5 again then went to reboot back to cwm for flash oc kernel and it started to bootloop after the samsung logo,,, its all fixed for now but im sure it will happen again
Click to expand...
Click to collapse
Flash "Root" After Flashing "CWM" See if that helps? if not please try the order i have gave, or try looking for different resources.
The Sources i have given you are working fine for my Ace.
Related
can anyone help me what version i need to flash / guide
this rom
http://forum.xda-developers.com/showthread.php?t=1510940
and this kernel
http://forum.xda-developers.com/showthread.php?t=1445214
i only now how to flash using ODIN through PC..
a guide also would mean so much to me...video is better..
btw:can i flash the kernel using ODIN method?how?
hope for your kind consideration and help.
im just dumbfounded with flashing ICS and kernels.
From which ROM are you coming? Cause, in the ROM the CWM is the integrated ... And that's the reason why sometimes the ROM needs to flash two times, means:
Flash ROM
Took out battery and put it in again
3-button-combo to CWM
Flash ROM again
Ready
By flashing the ROM first time, you get the right CWM to flash the ROM correctly ...
Sent from my GT-I9000 using XDA
bvt-1 said:
From which ROM are you coming? Cause, in the ROM the CWM is the integrated ... And that's the reason why sometimes the ROM needs to flash two times, means:
Flash ROM
Took out battery and put it in again
3-button-combo to CWM
Flash ROM again
Ready
By flashing the ROM first time, you get the right CWM to flash the ROM correctly ...
Sent from my GT-I9000 using XDA
Click to expand...
Click to collapse
can you please if it would not be so much to ask a LINK?
i have a 2.3.6 rom
I just flashed that rom to my SGS.
Booted into CWM, wiped cache, factory reset etc...
choose zip from card and flash the zip, back into cwm and do the same, reboot when finished.
Go back to cwm and flash the kernel by choosing the chose zip from sd card like above.
chrismarkham1982 said:
I just flashed that rom to my SGS.
Booted into CWM, wiped cache, factory reset etc...
choose zip from card and flash the zip, back into cwm and do the same, reboot when finished.
Go back to cwm and flash the kernel by choosing the chose zip from sd card like above.
Click to expand...
Click to collapse
can you direct me to a CWM KERNEL that is compatible with android 2.3.6
im just confused will all the number of versions there are.
thank you
Just got my Galaxy S back from my Mum today (After I bricked it and sent for repair) she got a note2 omg... Decided to flash a custom rom..
Here goes..
First I followed this guide completelyhttp://http://wiki.cyanogenmod.org/wiki/Samsung_Galaxy_S:_Full_Update_Guide. After I flash the CM 10, my recovery was upgraded to v6.0.1.5 after reboot. But I cannot get pass the recovery. I will have the cm boot animation, then back to recovery again. Tried reflashing the rom, doesnt say any errors but still gets stuck at recovery.
Then I went thru the method at the wiki.cyanogenmod again and successfully flashed cwm recovery 2.5 again. Tried flashing the CM10 rom again but this time round, It shows a long error message ending with "status 7"
I am still able to go into download mode.
Was on stock unrooted 2.3.3 DXJV9.
I made the super no.1 noob mistake of not making a backup........... But, why is rooting and flashing of this phone so hard.....
Pls, any help is greatly appreciated.
Btw, I have manage to flash the stock image via odin but is still stuck in a boot loop.. after Odin completed and reboot, I am back into the stock recovery with the below error messages.
It will work
scpion said:
Btw, I have manage to flash the stock image via odin but is still stuck in a boot loop.. after Odin completed and reboot, I am back into the stock recovery with the below error messages.
Click to expand...
Click to collapse
When u see red error message in stock recovery........u just wipe cache and reboot.......it will work.....
i have wiped everything many times over. but I am still stuck in the bootloop. the red error messages looked serious though.
try this
scpion said:
i have wiped everything many times over. but I am still stuck in the bootloop. the red error messages looked serious though.
Click to expand...
Click to collapse
U just use GB jw4(your region) ROM (don't use single file like PDA).........you use files separately like this [PDA,phone,CSC,pit(512 or 513)]...............use Odin 1.85 for flashing files......,when u complete the flashing it automatically reboot to fulfill the flashing...........then also it gives red error means........ clear only wipe cache and don't clear wipe all data...........reboot your system..... I think this will work for u...........:fingers-crossed:
Thanks. Have it solved. Flashed with another rom with seperate files. I was using the the all in one previously. Got it to run CM10 nightly though till now still not too sure how... But, I m real happy now. It works great so far and I couldnt understand why Sammy refuse to roll out official ones even for 4.0..
Still trying to figure out how to root, flash SGS though.. I have done so for many other device but by far,... this phone is the most complicating....
Aj rocker root
By processor only we not getting stock ICS rom but we getting custom ROM by hacking processor.............
For rooting the ROM u want to be in stock GB ROM like 2.3.5 or 2.3.6 and then u want to download this file(http://download.chainfire.eu/132/CF-Root/SGS/CF-Root-XX_OXA_JVU_2.3.6-v4.3-CWM3RFS.zip)............. after download u want to open Odin 1.85 and select PDA then choose the downloaded file...........select start to flash the file.........reboot and enjoy the root bosssss......if u like this press thanks:fingers-crossed:
Just to make sure..
What I did was,
Flashed Android 2.3.5 XXJVS Firmware and rooted with CF-Root-XX_OXA_JVS-v4.1-CWM3RFS.zip
Flashed the speedmod kernel via heimdall
Wiped data/cache. Flashed Latest CM10 nightly
( at this point, there was a error "status 0" installation aborted. When I reboot, the CM10 boot animation flashed twice and it brought me straight to CWM 6.0.1.5. Is this normal behaviour?? Then, not too sure what to do, I wipe data/cache and flashed CM10 and gapps again. this time round, installation successful and after reboot it boot into CM10. )
Is the above normal behaviour?
Next time I wish to change rom, from where I now( CM10) just need to wipe Data/cache and flashed the other rom?
Try to see if you can flash another custom Rom, if that works then it could be that your files are corrupted..
Have you stated your problem over at CM forums..
# Sent from my blazing slimbean SGS i9000 using Tapatalk 2 #
scpion said:
Just to make sure..
What I did was,
Flashed Android 2.3.5 XXJVS Firmware and rooted with CF-Root-XX_OXA_JVS-v4.1-CWM3RFS.zip
Flashed the speedmod kernel via heimdall
Wiped data/cache. Flashed Latest CM10 nightly
( at this point, there was a error "status 0" installation aborted. When I reboot, the CM10 boot animation flashed twice and it brought me straight to CWM 6.0.1.5. Is this normal behaviour?? Then, not too sure what to do, I wipe data/cache and flashed CM10 and gapps again. this time round, installation successful and after reboot it boot into CM10. )
Is the above normal behaviour?
Next time I wish to change rom, from where I now( CM10) just need to wipe Data/cache and flashed the other rom?
Click to expand...
Click to collapse
OK fine first u want to know something boss......... every firmware having different layout........ correct procedure of flashing is u want to go step by step for enjoy the full features of the ROM ....... u r in GB ROM means then next u want to go ICS ROM........If u r in ICS ROM means then next u want to go jellybean rom and this the correct procedure to use new ROM without the problems...........:good:
scpion said:
Just to make sure..
What I did was,
Flashed Android 2.3.5 XXJVS Firmware and rooted with CF-Root-XX_OXA_JVS-v4.1-CWM3RFS.zip
Flashed the speedmod kernel via heimdall
Wiped data/cache. Flashed Latest CM10 nightly
( at this point, there was a error "status 0" installation aborted. When I reboot, the CM10 boot animation flashed twice and it brought me straight to CWM 6.0.1.5. Is this normal behaviour?? Then, not too sure what to do, I wipe data/cache and flashed CM10 and gapps again. this time round, installation successful and after reboot it boot into CM10. )
Is the above normal behaviour?
Next time I wish to change rom, from where I now( CM10) just need to wipe Data/cache and flashed the other rom?
Click to expand...
Click to collapse
OK fine first u want to know something boss......... every firmware having different layout........ correct procedure of flashing is u want to go step by step for enjoy the full features of the ROM ....... u r in GB ROM means then next u want to go ICS ROM........If u r in ICS ROM means then next u want to go jellybean rom and this the correct procedure to use new ROM without the problems...........:good:
Most times from GB to JB u have 2 flash custom 2, 3 times. So its normal when flashing custom the first time it takes u to bootanimation and hangs (take out battery and go to recovery with 3 button combo and flash again till it says install is completed) or directly into recovery.
If u wanna flash other jb rom just full wipe and flash new custom. Make sure u make a nandroid backup so u can go back easily
Hi all,
give some information first.... at the beginning, i used rom manager to flash clockwork recovery 6.0.1.2, later i hv flashed cm10.1 rom, but i found that the resolution has some problem, so i want to flash back to stock rom... And then i go to this site http://forum.xda-developers.com/showthread.php?t=1901191, to install PhilZ-cwm6 (which is safer for installing stock rom?? i dont know).... After i hv applied the zip in the recovery mode, i found that i cant boot into the system (btw i hv wipe data and cache)
besides, i hv tried odin v1.87, but my pc cant connect with my phone (in download mode)...
what can i do Is my phone bricked?
Sorry for my poor English.
Thank You Guys!!
Problem fixed!!
after i hv installed samsung kies, odin can detect my phone!
Everything is fine now!:laugh:
kclam730 said:
Hi all,
give some information first.... at the beginning, i used rom manager to flash clockwork recovery 6.0.1.2, later i hv flashed cm10.1 rom, but i found that the resolution has some problem, so i want to flash back to stock rom... And then i go to this site http://forum.xda-developers.com/showthread.php?t=1901191, to install PhilZ-cwm6 (which is safer for installing stock rom?? i dont know).... After i hv applied the zip in the recovery mode, i found that i cant boot into the system (btw i hv wipe data and cache)
besides, i hv tried odin v1.87, but my pc cant connect with my phone (in download mode)...
what can i do Is my phone bricked?
Sorry for my poor English.
Thank You Guys!!
Click to expand...
Click to collapse
For the future:
Philz kernel is used for TouchWiz ROM's (based off what samsung gives us). You flashed a TW kernel onto a CM 10.1 ROM. If you still want to try out CM, then boot into recovery, do a full wipe, flash CM and gapps. After that is done perform a data wipe (factory reset) through recovery
Hello there.
I have a problem with my N7000. Today I've flashed stock firmware onto my phone, everything went ok, but I have a problem now. When I'm trying to install something from recovery, I can't. I select the ROM, everything is beeing checked, etc, and when it wants to install update, a message appears: "This packgage is for 'galaxynote,n7000,N7000,GT-N7000' devices: this is a ' '." . This happens with every single rom that I am trying to install via recovery. I tried to flash stock firmware two times, two different, still same effect, tried to whipe data/cache etc, still didnt got any effect. Any solution guys?
After you flash the stock ROM, the recovery will be stock as well.. You will not be able to flash roms from here.. For that you will need to flash philz kernel.
Well actually I can install anything via recovery, so installing kernel isnt possible.
Emkarcinos said:
Well actually I can install anything via recovery, so installing kernel isnt possible.
Click to expand...
Click to collapse
You can flash Philz kernel from stock recovery..
nokiamodeln91 said:
You can flash Philz kernel from stock recovery..
Click to expand...
Click to collapse
I have exactly the same problem (and the same situation) as the OP. You cannot flash Philz kernel from stock recovery because the exact same error will pop up.
Right mate I think I got it. You will need to flash an older version of Philz kernel first, and then upgrade. Worked fine for me once I decided to install "05.05.2013 - PhilZ-cwm6 v5.00.4 with CWM 6.0.3.1 based recovery" first.
So last time my phone was stuck on the device name and model number screen. I solved that issue by flashing TWRP using Odin.
but now the phone would not go past the boot screen no matter what I do. I re-flashed CM11 4 times now, factory reseted and wipe cache and dalvik cache. What should I do?
1. change your thread title please. Need help is not really helpful or directs to your issue.
2. what version of TWRP are you using? The official TWRP 2.8.7.0 does not work. Too long to explain why's that. To fix this issue there are some solutions if you flashed the faulty recovery:
- flash Stock ROM again and stay on TWRP 2.8.5.0
- some users fixed this issue by just flashing another recovery or just flashing a stock based custom rom to get their phone working. You still need to change recovery.
In my case I had to flash stock again and flash my preferred recovery again to get my phone working.
maultasche said:
1. change your thread title please. Need help is not really helpful or directs to your issue.
2. what version of TWRP are you using? The official TWRP 2.8.7.0 does not work. Too long to explain why's that. To fix this issue there are some solutions if you flashed the faulty recovery:
- flash Stock ROM again and stay on TWRP 2.8.5.0
- some users fixed this issue by just flashing another recovery or just flashing a stock based custom rom to get their phone working. You still need to change recovery.
In my case I had to flash stock again and flash my preferred recovery again to get my phone working.
Click to expand...
Click to collapse
So I should flash TWRP 2.8.5.0 and flash CM11 again? (because I don't have stock rom for S3 LTE)
Where can I get stock rom fro S3 LTE I can't seem to find it all, I find is firmwares.
Also, a few questions
1) If I give it into my phone carrier (Optus) would they know that it is rooted?
2) If they know it is rooted and with a custom rom and don't fix it for free is it possible to get it fixed by paying money??
The firmware provided by Samsung is the stock ROM I'm talking about
No, since you tried to flash a ROM through the faulty recovery you need to flash either official firmware from Samsung or a custom ROM based on Samsung stock like AMCHA or N4 Elite. I'd recommend to go with official Samsung firmware. After that go to stock recovery (it will come when you flash official firmware), do a factory reset and let the phone boot once. After that you can flash TWRP 2.8.5.0 and flash any ROM you want.
The new recovery from TWRP is too big for the S3. The S3 recovery is a little over 8MB, the new one needs more and messes up partitions etc. You won't be able to mount /system, /data and the recovery can't read your internal partitions as it should. Go with the way I provided. It seems like a lot of work but it's done in a few minutes.
For your two questions: yes and yes. But you can fix that on your own and don't need your operator or Samsung to get your phone fixed.
Thanks a lot for helping. I was scared to death cause if something happened I would've had to start using a old brick Nokia phones
Is it possible that after I flash the stock firmware, my phone still doesn't boot up?
I am basically a level above newbie, so I don't get what is happening. I see tutorials and do what they tell me to do. sometime I get what I am doing sometime I don't
as i said, after flashing stock, go into the recovery and do a factory reset. The phone will boot then
maultasche said:
as i said, after flashing stock, go into the recovery and do a factory reset. The phone will boot then
Click to expand...
Click to collapse
Ok sorry for doubting you! My phone is working now, thanks a lot for your help
Glad it's working now, you're welcome
I have rooted my s3 via odin and now i wont to flash twrp via flashify. Now i have a bootloop on my s3. How can i recover the phone. i am a noob on s3 and i don*t know how i could go into fastbootmode. Please help me.
what S3 do you have? Which recovery did you flash?
maultasche said:
2. what version of TWRP are you using? The official TWRP 2.8.7.0 does not work. Too long to explain why's that. To fix this issue there are some solutions if you flashed the faulty recovery:
- flash Stock ROM again and stay on TWRP 2.8.5.0
- some users fixed this issue by just flashing another recovery or just flashing a stock based custom rom to get their phone working. You still need to change recovery.
In my case I had to flash stock again and flash my preferred recovery again to get my phone working.
Click to expand...
Click to collapse
I had this problem too! Flashed stock rom, then flashed TWRP 2.8.5.0 (I was using 2.8.7.0) and then flashed cyanogenmod 12 and boom it booted and worked!
Thank you very much!