Database Develop

[Discontinued] [HOW TO] Root, Stock, ODIN For P3113UECLK7

This is nothing more than a pre-rooted completely stock image that you would flash in Odin.
It is based off of this stock image: P3113UECLK7_P3113XACCLK7_HOME.tar.md5
Simply adds the SuperSU apk v0.99 and su binary.
From there you can chose to install busybox, flash a non-stock recovery, etc.
It DOES NOT wipe any data. So if you are coming from a completely different rom base then you will want to boot to recovery and factory reset.
This is good for getting back to known good state after you may have flashed something and now have weird behavior going on. Also good if you want to run stock but just have root for a few apps like adaway or tibu.
Instructions:
Extract the root66_xxx_.tar.md5 from the .7z file you downloaded.
Use Odin, put device into download mode, connect to computer and open Odin.
once in odin click the PDA field and select the root66_xxx_.tar.md5 you downloaded.
Leave Auto Reboot and F. Reset Time checked.
click start and
when done let device reboot.
If you have issues flashing with Odin please ensure you are using the microusb cable that came with the device, users have had issues using other cables.
Choose One:
Download: root66_XAC_P3113UECLK7.7z - JellyBean 4.1.1
Download: root66_XAR_P3113UECLK7.7z - JellyBean 4.1.1

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
ty for this trying it out now
Update: installed via odin now its in recover loop. Just stuck with the lil android guy with his spinning cube in his chest. Progress bar at the bottom isn't moving at all.

F3AR420 said:
ty for this trying it out now
Update: installed via odin now its in recover loop. Just stuck with the lil android guy with his spinning cube in his chest. Progress bar at the bottom isn't moving at all.
Click to expand...
Click to collapse
Few questions....
I see in your signature you had AOKP. Did you flash this direct from AOKP? This doesn't wipe data and since it goes back to stock its still trying to use all your /data from aokp. You'd want to boot into recovery and do a factory reset coming from a different rom base than stock.
Also I use the Region XAC stock file. There is also an XAR. Does anyone know the difference? Samsung-updates seems to list XAC as N/A for region while XAR as Cellular South but I think I read the opposite from someone on the forum here.

Nah haven't updated my profile in a while. I had actually come from stock 4.0.4 i believe in my case atleast that my battery simply wasn't charged well enough.
Sent from my HTCEVODesign4G using Tapatalk 2

I would very politely like to point out that this has already been posted [13 Jan 2013] in this thread: http://forum.xda-developers.com/showthread.php?t=2098085 -- UECLK7

metalchef said:
I would very politely like to point out that this has already been posted [13 Jan 2013] in this thread: http://forum.xda-developers.com/showthread.php?t=2098085 -- UECLK7
Click to expand...
Click to collapse
Close. That thread shows you step by step how to do it yourself using mobile Odin lite using original official unmodified update files. This thread seems to give you one file to flash with Odin. Haven't tried this file yet...yet.

metalchef said:
I would very politely like to point out that this has already been posted [13 Jan 2013] in this thread: http://forum.xda-developers.com/showthread.php?t=2098085 -- UECLK7
Click to expand...
Click to collapse
There are a few differences. To use that thread your device has to be rooted. Here it does not.
In that thread you are using mobile odin to flash the stock file, then using recovery to flash root. Here root is pre-injected into the stock firmware. You can use mobile odin to flash this and be done. (unless you want a non-stock recovery etc).

LeftyGR said:
Close. That thread shows you step by step how to do it yourself using mobile Odin lite using original official unmodified update files. This thread seems to give you one file to flash with Odin. Haven't tried this file yet...yet.
Click to expand...
Click to collapse
Yes though you mention to use the XAR file and I've pre-injected the XAC. Outside of what you've said I can't find what region would be for what tablets. I'll post up the XAR as well and let the user pick.

XAR region uploaded..

mrRobinson said:
Few questions....
I see in your signature you had AOKP. Did you flash this direct from AOKP? This doesn't wipe data and since it goes back to stock its still trying to use all your /data from aokp. You'd want to boot into recovery and do a factory reset coming from a different rom base than stock.
Also I use the Region XAC stock file. There is also an XAR. Does anyone know the difference? Samsung-updates seems to list XAC as N/A for region while XAR as Cellular South but I think I read the opposite from someone on the forum here.
Click to expand...
Click to collapse
I found this suggestion to be quite helpful. I was coming from Tsunami and found if it would not boot to go back and factory reset. Thanks!
---------- Post added at 11:25 AM ---------- Previous post was at 11:21 AM ----------
Interestingly I am having a problem using TWRP to backup this ROM. TWRP FCs and the Tab reboots before any data is written to the SD card. It does create the named backup folder but dies early on in the backup process. Going to try CWM next but the backups created by CWM and TWRP are not compatible. TWRP has worked fine on all the other ROMs I tried. I need to perform more testing.

archcantor said:
I found this suggestion to be quite helpful. I was coming from Tsunami and found if it would not boot to go back and factory reset. Thanks!
---------- Post added at 11:25 AM ---------- Previous post was at 11:21 AM ----------
Interestingly I am having a problem using TWRP to backup this ROM. TWRP FCs and the Tab reboots before any data is written to the SD card. It does create the named backup folder but dies early on in the backup process. Going to try CWM next but the backups created by CWM and TWRP are not compatible. TWRP has worked fine on all the other ROMs I tried. I need to perform more testing.
Click to expand...
Click to collapse
yea try cwm. this is just stock maybe twrp is having some issue.

F3AR420 said:
ty for this trying it out now
Update: installed via odin now its in recover loop. Just stuck with the lil android guy with his spinning cube in his chest. Progress bar at the bottom isn't moving at all.
Click to expand...
Click to collapse
I have got exactly the same issue like this one when I was trying
root66_XAR_P3113UECLK7.7z - JellyBean 4.1.1
on my P3113. The tablet seems frozen at this stage and if I hold the power botton and let it reset, it will come back at the same screen with the progress bar unchanged.
My P3113 is with stock ICS ROM and rooted.
I cant do factory reset because when I trying to go to recovery mode, this screen shows up...

spunky2008 said:
I have got exactly the same issue like this one when I was trying
root66_XAR_P3113UECLK7.7z - JellyBean 4.1.1
on my P3113. The tablet seems frozen at this stage and if I hold the power botton and let it reset, it will come back at the same screen with the progress bar unchanged.
My P3113 is with stock ICS ROM and rooted.
I cant do factory reset because when I trying to go to recovery mode, this screen shows up...
Click to expand...
Click to collapse
I got the same result as well, eventhough Odin said pass. Funny thing is I put in download mode again and flash this official firmware from France. The Odin said failed, but after I reboot all good.

droidnext said:
I got the same result as well, eventhough Odin said pass. Funny thing is I put in download mode again and flash this official firmware from France. The Odin said failed, but after I reboot all good.
Click to expand...
Click to collapse
You must have lost the root by flashing the official stock rom, right?
I was thinking to flash the stock ICS rom for P3113 someone post on this board also but don't want to go through the hustles to root it again

spunky2008 said:
You must have lost the root by flashing the official stock rom, right?
I was thinking to flash the stock ICS rom for P3113 someone post on this board also but don't want to go through the hustles to root it again
Click to expand...
Click to collapse
Yes, I lost root. But I end up flash USA official firmware again and used this root method . It's very easy, took 15 sec. I came from CM10.1 nightly, but want to try official JB from Samsung. Actually, it's smooth and fast. Maybe I stick to it, I am tired of update everyday for CM10.1.

Removed post.

i tried this from a corrupted cm10.1 nighlty custom kernel which is stuck on the samsung galaxy tab 2 logo. odin was successful, i got pass the android screen shown in the previous post but now im stuck on the samsung logo with the blue orb. help

Re: [HOW TO] Root, Stock, ODIN For P3113UECLK7
jonahmt21 said:
i tried this from a corrupted cm10.1 nighlty custom kernel which is stuck on the samsung galaxy tab 2 logo. odin was successful, i got pass the android screen shown in the previous post but now im stuck on the samsung logo with the blue orb. help
Click to expand...
Click to collapse
Boot to recovery and factory wipe.

Removing the my external SD card did the trick for me.

Thanks cumanzor. One small comment like yours and it relieves a major headache for me, thanks again.

[ROM] Galaxy Tab 2 7" P3113, Jelly Bean 4.1.1 JRO03C P3113UECLK7 Rooted

Here's the stock ROM for the Galaxy Tab 2 7" P3113, Jelly Bean 4.1.1 JRO03C P3113UECLK7. ROM is rooted.
This is not deodexed. Its stock with root only.
Flash from recovery. Full Wipe if coming from another ROM.
Download:
GT2-JB-Stock-Rooted-P3113UECLK7.zip

Here's some screen shots!
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Sent from my HTC6435LVW using Tapatalk 2

thanks for this! (I already hit the "THANKS" button)...
I must say, that I was skeptical there'd by much, if any, difference between this and RomsWell v1.1 and/or kwbr Espresso.... but! There is at least one fundamental difference: the screen rotation is proper! -- e.g. Bejeweled 2 doesn't flip itself upside when my wife plays it -- whereas with the aforementioned ROMs, it did.
EDIT: Another [awesome] plus, is that I no longer get "Missing hardware ID" when I connect my tablet to my PC (it also shows as GT-P3113, not GT-P3110).
EDIT 2 (revised 11 March): overall performance is fantastic. Battery is amazing!: in a 24-hour period, stand-by used ~20% of battery (I thought I'd turned my tablet off, and when I went to use it -- a day later, I realized I'd never turned it off).
Nice to have an official release, esp with r00t ^_^

I am stuck in a boot-loop...
An suggestions...?

HOw to make a recovery flashable .zip from the ODIN flashable ROM
Hi,
I have the same version but donwloaded it from SAMMOBILE site and flashed with ODIN. Could you tell me the way to make a recovery flashable .zip from the ODIN flashable ROM?
Thanks!
MicroMod777 said:
Here's some screen shots!
Sent from my HTC6435LVW using Tapatalk 2
Click to expand...
Click to collapse

grassy-sneakers said:
I am stuck in a boot-loop...
An suggestions...?
Click to expand...
Click to collapse
wipe cache and dalvik cache via CWM...also, TWRP isn't official for tab 2 afaik, so if you're not using CWM-based recovery, I would flash that, then retry to zip file. I was successful on the first attempt...
EDIT: I would even format /system, then re-flash the ROM... I usually do that anyway before I flash a new ROM.

metalchef said:
thanks for this! (I already hit the "THANKS" button)..
EDIT 2: overall performance is fantastic. Battery life ain't what it used to be with 4.0.4, but it's only a marginal difference. Nice to have an official release, esp with r00t ^_^
Click to expand...
Click to collapse
Sweet. I've been working on a custom version also.
grassy-sneakers said:
I am stuck in a boot-loop...
An suggestions...?
Click to expand...
Click to collapse
You need to do full wipe. I used cwm recovery also.
nagenderjeet said:
Hi,
I have the same version but donwloaded it from SAMMOBILE site and flashed with ODIN. Could you tell me the way to make a recovery flashable .zip from the ODIN flashable ROM?
Thanks!
Click to expand...
Click to collapse
Not sure how to do that. I didn't get a chance to extract the stock recovery either. I haven't looked as the raw files from sammobile.
metalchef said:
wipe cache and dalvik cache via CWM...also, TWRP isn't official for tab 2 afaik, so if you're not using CWM-based recovery, I would flash that, then retry to zip file. I was successful on the first attempt...
Click to expand...
Click to collapse
Yes, cwm works very easy for me also.
Sent from my HTC6435LVW using Tapatalk 2

metalchef said:
wipe cache and dalvik cache via CWM...also, TWRP isn't official for tab 2 afaik, so if you're not using CWM-based recovery, I would flash that, then retry to zip file. I was successful on the first attempt...
EDIT: I would even format /system, then re-flash the ROM... I usually do that anyway before I flash a new ROM.
Click to expand...
Click to collapse
Nice..., thanks...!
Yeah, I reinstalled the Stock Rom w/Stock Recovery last night, before attempting this latest Rom. Figuring the Stock Recovery would wipe thoroughly enough. I am off to go have dinner and do not have the time right now, but will try a thorough wipe with CWM Recovery and another attempt to install this Rom when I return. Will post my results then.
Thank you, for your response...!
---------- Post added at 06:05 PM ---------- Previous post was at 05:50 PM ----------
nagenderjeet said:
Hi,
I have the same version but donwloaded it from SAMMOBILE site and flashed with ODIN. Could you tell me the way to make a recovery flashable .zip from the ODIN flashable ROM?
Thanks!
Click to expand...
Click to collapse
I believe it is related or requires a Linux Box/Ubuntu, I have seen tutorials around here in the XDA Forum, but I am little bit short of time right now to dig one out of Google, but was able to find this one to provide you with an example. to illustrate how it requires a md5 check sum that is only able to be produced in a Linux Box of some sort, though command line.
[TUTORIAL] How To Create Your Own Odin Flashable TAR or TAR.MD5

Nope...?, I have triple wiped cache and dalvik cache, factory/data, and to no dismay have I been able to avoid a boot-loop.
I am using CWM Recovery version 6.0.2.3 Touch, and like I mentioned, all it does is boot-loop.
FYI; I have also found a Sammobile download consisting of a number of (XAR) Stock Roms to bring me to the point of this build, as well as, tried multiple times to updated via WiFi, and it all comes down to this particular build. That my device gets caught in a boot-loop. I am not sure what it is with this build, but it just does not want to fit on my device.
---------- Post added at 09:42 PM ---------- Previous post was at 09:36 PM ----------
I have even tried this Stock Software Update: P3113UECLK7 Android 4.1.1 Jelly Bean...?

grassy-sneakers said:
Nope...?, I have triple wiped cache and dalvik cache, factory/data, and to no dismay have I been able to avoid a boot-loop.
I am using CWM Recovery version 6.0.2.3 Touch, and like I mentioned, all it does is boot-loop.
FYI; I have also found a Sammobile download consisting of a number of (XAR) Stock Roms to bring me to the point of this build, as well as, tried multiple times to updated via WiFi, and it all comes down to this particular build. That my device gets caught in a boot-loop. I am not sure what it is with this build, but it just does not want to fit on my device.
---------- Post added at 09:42 PM ---------- Previous post was at 09:36 PM ----------
I have even tried this Stock Software Update: P3113UECLK7 Android 4.1.1 Jelly Bean...?
Click to expand...
Click to collapse
Are you able to flash any Rom and boot?
Sent from my HTC6435LVW using Tapatalk 2

MicroMod777 said:
Are you able to flash any Rom and boot?
Click to expand...
Click to collapse
Yeah...!, I have no problem. The problem is P3113UECLK7 Rom, I get to P3113UEBLH2 the last update offered by Samsung, and it gets stuck in a boot-loop when it reboots.
I even started over with a Odin Flash of a Stock Rom & Recovery, and then work my way up to the third update P3113UEBLH2. Everything continues to work fine, until I get the Jelly Bean 4.1.1 update no matter if it is a Stock OTA update or a Modified (Rooted) update, forced through Odin or even assisted through Kies. After it reboots it is stuck in a endless boot-loop.
I even let it sit on the charger over night, to see if it just needed sometime to load.

grassy-sneakers said:
Yeah...!, I have no problem. The problem is P3113UECLK7 Rom, I get to P3113UEBLH2 the last update offered by Samsung, and it gets stuck in a boot-loop when it reboots.
I even started over with a Odin Flash of a Stock Rom & Recovery, and then work my way up to the third update P3113UEBLH2. Everything continues to work fine, until I get the Jelly Bean 4.1.1 update no matter if it is a Stock OTA update or a Modified (Rooted) update, forced through Odin or even assisted through Kies. After it reboots it is stuck in a endless boot-loop.
I even let it sit on the charger over night, to see if it just needed sometime to load.
Click to expand...
Click to collapse
it's been my experience, that touch-based recovery" [on the GT-P3113] doesn't play well with others." for example, I was unable to flash kwbr espresso when I had touch-based recovery (either twrp or cwm-based, I forget -- doesn't matter) on my tablet.
flash 6.0.2.3 non-touch-based recovery (yeah, I know, having to use the vol +/- keys sucks ^_^) and try again. :good:
(and I would freeze the software update app(s) in TiBu. since I'm sure you know that you can't flash OTA's with custom recovery - that's one cause of a bootloop)

[Q] Problem with my p880 after installing android.

Hey guys, I'm new here..idk if this is the right category but here we go: I tried to upgrade the software from the phone and after reboot just went in recovery mode and I found out I have no android. After that I copied stable cm 10.1 gapps on my sd card then I tried to install the zips, everything seemed ok..I restarted the phone and it went straight to recovery mode. I did the same thing with the android 4.4.2 MoKee and happend the same thing. What should i do?

kanaal said:
Hey guys, I'm new here..idk if this is the right category but here we go: I tried to upgrade the software from the phone and after reboot just went in recovery mode and I found out I have no android. After that I copied stable cm 10.1 gapps on my sd card then I tried to install the zips, everything seemed ok..I restarted the phone and it went straight to recovery mode. I did the same thing with the android 4.4.2 MoKee and happend the same thing. What should i do?
Click to expand...
Click to collapse
Try installing Symbian , just kidding.
Did you unlock the bootloader of the phone while you were on stock rom?

fuathan said:
yeah guys I ask anything ?
Click to expand...
Click to collapse
Apparently you do.

Coolneng said:
Try installing Symbian , just kidding.
Did you unlock the bootloader of the phone while you were on stock rom?
Click to expand...
Click to collapse
Yes, I unlocked the bootloader

kanaal said:
Hey guys, I'm new here..idk if this is the right category but here we go: I tried to upgrade the software from the phone and after reboot just went in recovery mode and I found out I have no android. After that I copied stable cm 10.1 gapps on my sd card then I tried to install the zips, everything seemed ok..I restarted the phone and it went straight to recovery mode. I did the same thing with the android 4.4.2 MoKee and happend the same thing. What should i do?
Click to expand...
Click to collapse
Can you little better describe how did you upgrade the software. Recovery, rom etc. Did you start at stock ICS or JB?

LGaljo said:
Can you little better describe how did you upgrade the software. Recovery, rom etc. Did you start at stock ICS or JB?
Click to expand...
Click to collapse
I had stock JB and I had this program in menu "Software update" and it was an 19-25 mb update..I downloaded and I installed the update then the phone rebooted and it went in cwm recovery. If I install a custom rom everything seems ok, after reboot it enter straight to recovery and I don't know why.

kanaal said:
I had stock JB and I had this program in menu "Software update" and it was an 19-25 mb update..I downloaded and I installed the update then the phone rebooted and it went in cwm recovery. If I install a custom rom everything seems ok, after reboot it enter straight to recovery and I don't know why.
Click to expand...
Click to collapse
If you set up working stock JB follow this:
*prepare custom ROM, kernel and Gapps then copy to SD
*if you want CWM download this: http://download2.clockworkmod.com/recoveries/recovery-clockwork-touch-6.0.4.5-p880.img, then copy *.img file to a folder where adb is installed and rename it to recovery.img
*boot to fastboot mode (adb reboot oem-unlock)
*install recovery in fastboot mode (fastboot flash recovery recovery.img)
*power off, then boot to recovery
*flash ROM, Gapps and kernel

LGaljo said:
If you set up working stock JB follow this:
*prepare custom ROM, kernel and Gapps then copy to SD
*if you want CWM download this: http://download2.clockworkmod.com/recoveries/recovery-clockwork-touch-6.0.4.5-p880.img, then copy *.img file to a folder where adb is installed and rename it to recovery.img
*boot to fastboot mode (adb reboot oem-unlock)
*install recovery in fastboot mode (fastboot flash recovery recovery.img)
*power off, then boot to recovery
*flash ROM, Gapps and kernel
Click to expand...
Click to collapse
Ok, I will try this but can you suggest me a good custom ROM and kernel? I never installed a kernel before and i don't know what to look for

kanaal said:
Ok, I will try this but can you suggest me a good custom ROM and kernel? I never installed a kernel before and i don't know what to look for
Click to expand...
Click to collapse
You don't really need different kernel, for first start I suggest you official CM11 nightly
Hit thanks if it helps

LGaljo said:
You don't really need different kernel, for first start I suggest you official CM11 nightly
Hit thanks if it helps
Click to expand...
Click to collapse
While I try to install the cwm I get this error http://i.imgur.com/d9nPSeI.jpg I installed with my cwm 6.0.4.4 the CM11 gapps and this kernel http://forum.xda-developers.com/showthread.php?t=2241474 all of these installed with no problems, after that i reboot and the cwm recovery appears w/o pressing the volume button.

kanaal said:
While I try to install the cwm I get this error
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
I installed with my cwm 6.0.4.4 the CM11 gapps and this kernel http://forum.xda-developers.com/showthread.php?t=2241474 all of these installed with no problems, after that i reboot and the cwm recovery appears w/o pressing the volume button.
Click to expand...
Click to collapse
I recommend you not to use this kernel, it is deprecated. Try without flashing different kernel first. Which CWM did you download? From link I gave?
EDIT: Have you done formats of /system, /data, /cache ?

You bugged out your device. OTA doesnt work properly with custom recovery installed. Reflash kdz to fix the issue,but try grabbing everything you need from via adb from recovery first as you may have to do hard reset from stock recovery which will format your internal sd (in case you dont know how to flash custom recovery via fastboot)

LGaljo said:
I recommend you not to use this kernel, it is deprecated. Try without flashing different kernel first. Which CWM did you download? From link I gave?
EDIT: Have you done formats of /system, /data, /cache ?
Click to expand...
Click to collapse
Yes, from the link you gave me and I did formated the /system, /data and /cache
Flying_Bear said:
You bugged out your device. OTA doesnt work properly with custom recovery installed. Reflash kdz to fix the issue,but try grabbing everything you need from via adb from recovery first as you may have to do hard reset from stock recovery which will format your internal sd (in case you dont know how to flash custom recovery via fastboot)
Click to expand...
Click to collapse
What kdz is? Sorry, but i'm new in this thing.

kanaal said:
Yes, from the link you gave me and I did formated the /system, /data and /cache
What kdz is? Sorry, but i'm new in this thing.
Click to expand...
Click to collapse
You can reflash or put phone to stock state with using lgmobile support tool. Just put phone in S/W mode (volume down and USB cable plug in) and in dropdown menu select update recovery

LGaljo said:
You can reflash or put phone to stock state with using lgmobile support tool. Just put phone in S/W mode (volume down and USB cable plug in) and in dropdown menu select update recovery
Click to expand...
Click to collapse
Ok, so i was following this tutorial http://forum.xda-developers.com/showthread.php?t=2069723 and on LG Mobile Support when I press install usb driver I can't find LGP880, why? maybe something is missing from pc like drivers or something like that?
EDIT: I did it, my phone works fine thank you very much! one more thing..can i install CM11 w/o problems now? i mean while i'm on 4.1.2

kanaal said:
Ok, so i was following this tutorial http://forum.xda-developers.com/showthread.php?t=2069723 and on LG Mobile Support when I press install usb driver I can't find LGP880, why? maybe something is missing from pc like drivers or something like that?
EDIT: I did it, my phone works fine thank you very much! one more thing..can i install CM11 w/o problems now? i mean while i'm on 4.1.2
Click to expand...
Click to collapse
yes, you can. the bug you encountered only happens when you use OTA with modified stock firmware.
good luck :good:

Flying_Bear said:
yes, you can. the bug you encountered only happens when you use OTA with modified stock firmware.
good luck :good:
Click to expand...
Click to collapse
Ok, I got it. Thank you! One more thing, I swear it! When I try to root my phone (I follow this guide http://forum.xda-developers.com/showthread.php?t=1818502 ), the SystemBackupTest doesn't work, I googled the problem and I found nothing.

kanaal said:
Ok, I got it. Thank you! One more thing, I swear it! When I try to root my phone (I follow this guide http://forum.xda-developers.com/showthread.php?t=1818502 ), the SystemBackupTest doesn't work, I googled the problem and I found nothing.
Click to expand...
Click to collapse
you are using deprecated method. that's method for ics. search for a way to root jellybean 20a.

[Q] [HELP] HTC ONE (M7) Black screen, no radio

Alright so I tried flashing the android revolution 71.1 on my phone after I completely unrooted it, unlocked the bootloader again, and got S-OFF. I think my Android version was at 4.1 or something when I had it.
So when I tried to flash the ROM, I remember making a back up, but when the ROM didn't boot and just got stuck on the logo I went into Bootloader and FACTORY RESET. Then I thought my backup was still valid, which it probably wasn't at that point, and I tried to use it and still a black screen and no radio (using TWRP btw), then my SuperSU-v1.94 was gone, so I had to adb push it, AND MY SCREEN IS STILL BLACK, WITHOUT A RADIO.
Im panicking. What do I do? Download an odex stock ROM for One and push it? Then download a radio?
Someone help.

Blackpocket13 said:
Alright so I tried flashing the android revolution 71.1 on my phone after I completely unrooted it, unlocked the bootloader again, and got S-OFF. I think my Android version was at 4.1 or something when I had it.
So when I tried to flash the ROM, I remember making a back up, but when the ROM didn't boot and just got stuck on the logo I went into Bootloader and FACTORY RESET. Then I thought my backup was still valid, which it probably wasn't at that point, and I tried to use it and still a black screen and no radio (using TWRP btw), then my SuperSU-v1.94 was gone, so I had to adb push it, AND MY SCREEN IS STILL BLACK, WITHOUT A RADIO.
Im panicking. What do I do? Download an odex stock ROM for One and push it? Then download a radio?
Someone help.
Click to expand...
Click to collapse
See this thread. Also, ARHD isn't supported on the Sprint HTC One, except on the old version (I believe 31.1). They should really remove the Sprint Support from their thread..

StormyNight said:
See this thread. Also, ARHD isn't supported on the Sprint HTC One, except on the old version (I believe 31.1). They should really remove the Sprint Support from their thread..
Click to expand...
Click to collapse
Mind telling me some Roms that work for sense 6 and HTC ONE 4.4 kitkat, Sprint specifically.
Also a new problem has arose. I keep getting this Hands Free Activation thing popping up. I fixed my phone, got the bootloader off, got S-off, and left it on stock root because I was scared that it would brick again if I put any other sort of rom on there. So I deleted the vDM Client from a few suggestions after looking up why it kept coming up and rebooting my phone, now my camera doesn't work, and my phone's MTP won't show up in my computer system.

Blackpocket13 said:
Mind telling me some Roms that work for sense 6 and HTC ONE 4.4 kitkat, Sprint specifically.
Also a new problem has arose. I keep getting this Hands Free Activation thing popping up. I fixed my phone, got the bootloader off, got S-off, and left it on stock root because I was scared that it would brick again if I put any other sort of rom on there. So I deleted the vDM Client from a few suggestions after looking up why it kept coming up and rebooting my phone, now my camera doesn't work, and my phone's MTP won't show up in my computer system.
Click to expand...
Click to collapse
I recommend ViperOne 7.0.0 which is in my signature. If you want other ROMs, look here.

StormyNight said:
I recommend ViperOne 7.0.0 which is in my signature. If you want other ROMs, look here.
Click to expand...
Click to collapse
Thank you, now can you help me with this new problem I mentioned?

Blackpocket13 said:
Thank you, now can you help me with this new problem I mentioned?
Click to expand...
Click to collapse
You won't get Hands Free Activation when you flash ViperOne 7.0.0, but if you're flashing a different ROM, this worked for me
1) Boot into the ROM once until you see Hands Free Activation at Setup
2) Boot into TWRP recovery
3) Wipe dalvik cache
4) Mount system
5) Use the file manager to go to system/apps then delete HTCSetupWizard.apk
6) Wipe dalvik cache again
7) Unmount system
8) Reboot to normal

StormyNight said:
You won't get Hands Free Activation when you flash ViperOne 7.0.0, but if you're flashing a different ROM, this worked for me
1) Boot into the ROM once until you see Hands Free Activation at Setup
2) Boot into TWRP recovery
3) Wipe dalvik cache
4) Mount system
5) Use the file manager to go to system/apps then delete HTCSetupWizard.apk
6) Wipe dalvik cache again
7) Unmount system
8) Reboot to normal
Click to expand...
Click to collapse
1 I forgot, but can I flash my rom when I'm on stock root without wiping anything?
2 When I backup my data can I just restore if something goes wrong with the Viper install?
3. My phone isn't showing up in my system. The MTP keeps failing. Help.
4. Will my camera work again after flashing the rom?

Blackpocket13 said:
1 I forgot, but can I flash my rom when I'm on stock root without wiping anything?
2 When I backup my data can I just restore if something goes wrong with the Viper install?
3. My phone isn't showing up in my system. The MTP keeps failing. Help.
4. Will my camera work again after flashing the rom?
Click to expand...
Click to collapse
1. You'll have to wipe everything except Internal Storage in TWRP before flashing the ROM.
2. Yeah, you can do a nandroid backup.
3. Try unlocking your phone (I don't mean SIM unlock here) and then putting the USB cable in.
4. Yep, it most likely will.

StormyNight said:
1. You'll have to wipe everything except Internal Storage in TWRP before flashing the ROM.
2. Yeah, you can do a nandroid backup.
3. Try unlocking your phone (I don't mean SIM unlock here) and then putting the USB cable in.
4. Yep, it most likely will.
Click to expand...
Click to collapse
1 Sorry for the million questions, you've been a great help so far, thank you
2 I don't understand, "unlock my phone", like the security lock? I've been having problems with this all night. I deleted the drivers and MTP drive several times, downloaded them several times. Do I need Universal Naked Drivers? I've downloaded them, but in the zip I don't see an application file to click. Is there one? I just really want to be able to media transfer.
3 Internal storage, you say? So my music and various apps will be safe?

Blackpocket13 said:
1 Sorry for the million questions, you've been a great help so far, thank you
2 I don't understand, "unlock my phone", like the security lock? I've been having problems with this all night. I deleted the drivers and MTP drive several times, downloaded them several times. Do I need Universal Naked Drivers? I've downloaded them, but in the zip I don't see an application file to click. Is there one? I just really want to be able to media transfer.
3 Internal storage, you say? So my music and various apps will be safe?
Click to expand...
Click to collapse
1. Remember that thanks button .
2. Yeah, the security lock. About the drivers, I already had fastboot drivers (from the official android SDK on my computer) so I used those and they worked fine.
3. Your music will be safe, your apps most likely won't be safe. Back them up using Titanium Backup.

StormyNight said:
1. Remember that thanks button .
2. Yeah, the security lock. About the drivers, I already had fastboot drivers (from the official android SDK on my computer) so I used those and they worked fine.
3. Your music will be safe, your apps most likely won't be safe. Back them up using Titanium Backup.
Click to expand...
Click to collapse
1 Definitely going to hit that thank you button, mate.
2 Can you maybe link me to where I an get these drivers, and do I need to delete all drivers from HTC before installing?
3 Is Titan linked to my Google play account? Once I used it and nothing saved when I re-downloaded the app after flashing something.

Blackpocket13 said:
1 Definitely going to hit that thank you button, mate.
2 Can you maybe link me to where I an get these drivers, and do I need to delete all drivers from HTC before installing?
3 Is Titan linked to my Google play account? Once I used it and nothing saved when I re-downloaded the app after flashing something.
Click to expand...
Click to collapse
2. I followed this video made by @wwjoshdew http://www.youtube.com/watch?v=WEof4Rnh4oM
3. I don't think so.

StormyNight said:
2. I followed this video made by @wwjoshdew http://www.youtube.com/watch?v=WEof4Rnh4oM
3. I don't think so.
Click to expand...
Click to collapse
When wiping, it's everything but Internal storage?
And when I restore backup, what do I wipe?

Blackpocket13 said:
When wiping, it's everything but Internal storage?
And when I restore backup, what do I wipe?
Click to expand...
Click to collapse
Yeah everything but internal storage and USB-OTG.
When you restore a backup, wipe everything except internal storage and USB-OTG.

StormyNight said:
Yeah everything but internal storage and USB-OTG.
When you restore a backup, wipe everything except internal storage and USB-OTG.
Click to expand...
Click to collapse
Viper download came out to 1,123.9 mb is that right? I don't want this file to softbbrick my phone if I'm a few bytes short of 1.1GB.

Blackpocket13 said:
Viper download came out to 1,123.9 my is that right? I don't want this file to softbbrick my phone if I'm a few bytes short of 1.1GB.
Click to expand...
Click to collapse
Check the MD5 of the file. It should be 32272A58B9A85C9450C626D7D1D9711E.

StormyNight said:
Check the MD5 of the file. It should be 32272A58B9A85C9450C626D7D1D9711E.
Click to expand...
Click to collapse
I'm not sure how to check that from my phone.

Blackpocket13 said:
I'm not sure how to check that from my phone.
Click to expand...
Click to collapse
https://play.google.com/store/apps/details?id=com.fab.md5

StormyNight said:
https://play.google.com/store/apps/details?id=com.fab.md5
Click to expand...
Click to collapse
I installed sdk tools and manager on my phone. I now have fastboot, My phone keeps saying "unable to coonect to pc. Either you do not have the latest sync manager installed on your pc, or another phone is already using internet pass-through" etc, etc.

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

How to install a custom rom on my galaxy s3 mini?

Hi all,
i would like to ask how to install a custom rom onto my samsung galaxy s3 mini. I know there are many guides but i am a complete starter, i just made a switch from apple and i have no idea what they mean, even the clearest one.. I just want to update these devices to lollipop since they are still on 4.1.2 jelly bean. Omnirom or cyanogen or others, i dont mind, i just want an updated device. Step by step instructions on everything would be perfect thank you!! By the way, i dont have windows, only mac.
this would help me a lot in the future.
thanks

Leonardo Yip said:
Hi all,
i would like to ask how to install a custom rom onto my samsung galaxy s3 mini. I know there are many guides but i am a complete starter, i just made a switch from apple and i have no idea what they mean, even the clearest one.. I just want to update these devices to lollipop since they are still on 4.1.2 jelly bean. Omnirom or cyanogen or others, i dont mind, i just want an updated device. Step by step instructions on everything would be perfect thank you!! By the way, i dont have windows, only mac.
this would help me a lot in the future.
thanks
Click to expand...
Click to collapse
Hi, at first I suggest to you to choose between two roms: The Omnirom and the CM. Your choice depend only about what you want from your phone. The Omni one is pretty nice and it looks like more a stock rom. The CM is very customisable in a lot of stuff. If you are not very expert, I suggest to you the CM, because it's more easy to install. But decide at first what you need from your phone!

Stefano Cappelletti said:
Hi, at first I suggest to you to choose between two roms: The Omnirom and the CM. Your choice depend only about what you want from your phone. The Omni one is pretty nice and it looks like more a stock rom. The CM is very customisable in a lot of stuff. If you are not very expert, I suggest to you the CM, because it's more easy to install. But decide at first what you need from your phone!
Click to expand...
Click to collapse
I’ll choose Cyanogen then. Thanks for the reply.

What you need to flash is:
- the original firmware
- Odin
- USB drivers
- CM (Odin version)
- gApps (Google Apps)
You can find the original firmware on sammobile.com, and you can find other sottware on novafusion.pl in the section . When you have everything we can start!

Stefano Cappelletti said:
What you need to flash is:
- the original firmware
- Odin
- USB drivers
- CM (Odin version)
- gApps (Google Apps)
You can find the original firmware on sammobile.com, and you can find other sottware on novafusion.pl in the section . When you have everything we can start!
Click to expand...
Click to collapse
Is it ok if i get odin for mac? Because i'm a mac user. I'm not sure if this is official
techbeasts . com/2015/04/13/download-odin-jdoin3-mac/
I added two spaces between on the left and write of the dot because I'm not allowed to post links, idk why. Just remove the other two spaces thanks.
Two more things, I can't find the USB drivers or original firmware on novafusion. And please be patient as it will take a while to download these things. My internet has a whopping 200 kilobytes per second, yeah it's slower than a snail...

It seems that Odin for Mac doesn't exist, the software that you can find is only similar but not the original Odin. Maybe they are good software as well but I don't want to risk to brick the phone for a not fully compatible software... Don't worry: we do everything also without Odin, is just a little bit longer but it works.
At first reboot your phone in recovery mode (menu button, volume up, power botton than wait) and do the wipe of cache and than reboot it and wait.
When the Phone is ready go here and download the SuperSu (to root the device) https://download.chainfire.eu/696/SuperSU/UPDATE-SuperSU-v2.46.zip
and copy the zip file in your phone, than, reboot again the device in recovery mode and select "instal ZIP" (or something like that, I don't remember exactly honesty and choose the zip that you downloaded. Reboot the phone and now if everything worked you should find an app called "SuperSU" in your drawer. After you got the root access, we can go to the next step

Oh i actually already rooted it with KingRoot, is it bad?

Leonardo Yip said:
Oh i actually already rooted it with KingRoot, is it bad?
Click to expand...
Click to collapse
KingoRoot is also fine.
Regarding "Odin on Mac":
jOdin uses "Heimdall" which works fine with S3 Mini - so unless they messed up the UI completely (giving wrong commands to Heimdall) the tool works fine, too.

KingRoot is should be fine at the same. You just need the root access to flash the device from the recovery. I sugget to you to install the TWRP recvery if you don't have it yet. You can download it and flash it from the recovery (you have root access now) or you can download an app on Google Play store like rom manager or TWRP manager and install the recovery from the app. Then we can go to the next step

KaffeeKiffer thanks but i'll stick with Stefano's method . Ok i got TWRP, but i still can't find the USB drivers or the original firmware (it's not on SamMobile). And for cyanogen mod 12.1, do i now get the normal version, like not the odin one?

Yes, you have to download not the Odin version but the other one "recovery version". At the same you have to download and flash the TWRP recovery first (always "recovery version" of the download). It should be the same also if you flash the CM with other recovery but I read online that flashing CM via recovery, by the TWRP recovery is better.
1) Download and flash TWRP recovery
2) Wipe cache and clean everything
3) Download and flash
Now the next step will be installing gApps

MAJOR PROBLEM!!! PLEASE HELP NOW. It failed to install the zip, and when i try to reboot it, it goes automatically to twrp.. please see attached picture, please please help. it says E: Error executing updater binary in zip
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
http://postimg.org/image/j4invhd0v/

Leonardo Yip said:
MAJOR PROBLEM!!! PLEASE HELP NOW. It failed to install the zip, and when i try to reboot it, it goes automatically to twrp.. please see attached picture, please please help. it says E: Error executing updater binary in zip
http://postimg.org/image/j4invhd0v/
Click to expand...
Click to collapse
sei italiano?

KaffeeKiffer said:
KingoRoot is also fine.
Regarding "Odin on Mac":
jOdin uses "Heimdall" which works fine with S3 Mini - so unless they messed up the UI completely (giving wrong commands to Heimdall) the tool works fine, too.
Click to expand...
Click to collapse
I'll jump in long enough to point out that Heimdall/Odin is not functional under current Mac environments. SInce Mobile Odin is effectively obsolete for current devices/ROMs, Mac users often rely on fastboot and similar tools instead for what can't be accomplished via a good custom recovery such as TWRP.

Leonardo Yip said:
Hi all,
i would like to ask how to install a custom rom onto my samsung galaxy s3 mini. I know there are many guides but i am a complete starter, i just made a switch from apple and i have no idea what they mean, even the clearest one.. I just want to update these devices to lollipop since they are still on 4.1.2 jelly bean. Omnirom or cyanogen or others, i dont mind, i just want an updated device. Step by step instructions on everything would be perfect thank you!! By the way, i dont have windows, only mac.
this would help me a lot in the future.
thanks
Click to expand...
Click to collapse
install odin on windows pc: http://depositfiles.com/files/m2n77b1vc
install samsung drivers on windows pc: http://developer.samsung.com/technical-doc/view.do?v=T000000117#none
get cyanogenmod 12.1: http://novafusion.pl/
get the odin version
when mobile powered off, hold volume down, home and power button. You get the downloadmode option on your screen, let go all buttons and press volume up button.
Now connect the phone to your pc with the usb cable and let odin find it.
Load the tar file in the downloaded zip file as pda and flash it.
If you want clockwork mod, install this as tar, also in pda flash option: https://www.androidfilehost.com/?fid=95887005526789241
If your samsung doesn't work but you can still get into download mode, view next page: http://forum.xda-developers.com/showthread.php?t=2122548
and install a fail safe firmware according to your type of phone.

Leonardo Yip said:
MAJOR PROBLEM!!! PLEASE HELP NOW. It failed to install the zip, and when i try to reboot it, it goes automatically to twrp.. please see attached picture, please please help. it says E: Error executing updater binary in zip
http://postimg.org/image/j4invhd0v/
Click to expand...
Click to collapse
I don't have 12.1 running, but isn't TRWP 2.6.3 a bit low? I hope somebody with experience in that regard can help you.
But on Novafusion's site (which I assume you're flashing), the current version is 2.8.
Androidandy's version also worked great for me.
Mike B. said:
I'll jump in long enough to point out that Heimdall/Odin is not functional under current Mac environments. SInce Mobile Odin is effectively obsolete for current devices/ROMs, Mac users often rely on fastboot and similar tools instead for what can't be accomplished via a good custom recovery such as TWRP.
Click to expand...
Click to collapse
Thanks for the info - I tested it some time ago and have a windows PC, so no need to run it ever after.
I was just relying on my past experience.

What i don't understand is why the flashing went wrong, I did everything right, at least I think. Wipe everything and flash the rom, why didn't it work?