Hi all
firstly I must give all the devs a thumbs up on their work in creating some great ICS roms, but infortunately i find the lag a little annoying so I want to go back to Gingerbread.
I still have S-on, I used HTC dev to unlock bootloader and installed clockworkmod, and currently running cooldroid rom.
Radio-3822.10.08.28_M and HBOOT - 2.00
I made a nandroid backup of my Optus GB bloatware rom but unsure of how to re-instalI...
I tried booting into clockwork recovery, and restoring backup, but phone didn't get past HTC splash screen after that, and then booted to recovery.
so i booted back into recovery and did a full format inc. delvic wipe and then restored backup, and still boots to splashcreen, switches off then boots to recovery...
i even tried extracting the boot image from optus backup and flashed that seperately using command prompt...
Am I missing a step here...
or should i just download a zip copy of the orig rom from the topic in the dev section eg:
RUU_Vivo_Gingerbread_S_Optus_AU_2.12.980.2_R_Radio_20.2803.30.085A ( but radio not the same ... )
reflashed back to cooldroid for time being.
any help would be apprieciated
Addy
That's am RUU you have to install those from a PC you cannot do them from your phone.
You could try a GB from the dev section. Nik trinity v5 is meant to be a good gb Rom ?
Sent from my HTC Incredible S using xda premium
You might want to try this sequence:
Restore nandroid from recovery
Format cache and wipe dalvik
Flash boot.img in fastboot
Nonverbose said:
You might want to try this sequence:
Restore nandroid from recovery
Format cache and wipe dalvik
Flash boot.img in fastboot
Click to expand...
Click to collapse
Yes you will have to flash the boot.img from the backup directory in Fastboot mode.
tpbklake said:
Yes you will have to flash the boot.img from the backup directory in Fastboot mode.
Click to expand...
Click to collapse
OP mentioned flashing the boot.img in command prompt already, I was just assuming that doing the full wipe before restoring the nandroid as he was doing may have flashed a cache that was causing issues with bootup so I suggested wiping it after initial restore. I haven't had a grease deal of experience with stock Rom backups so I would like to hear your thoughts about it.
@addyhash another user (n1cnak) has located the Optus sense 3 ruu which would be the same version as you had installed. I have asked in his thread if he could upload it and if all else fails it would be a better solution than the ruu you mentioned in your post ( unless you planned to go s-off)
Nonverbose said:
OP mentioned flashing the boot.img in command prompt already, I was just assuming that doing the full wipe before restoring the nandroid as he was doing may have flashed a cache that was causing issues with bootup so I suggested wiping it after initial restore. I haven't had a grease deal of experience with stock Rom backups so I would like to hear your thoughts about it.
@addyhash another user (n1cnak) has located the Optus sense 3 ruu which would be the same version as you had installed. I have asked in his thread if he could upload it and if all else fails it would be a better solution than the ruu you mentioned in your post ( unless you planned to go s-off)
Click to expand...
Click to collapse
thanks for your prompt replay guys much appreciated, I ended up using this rom :
vivo_signed_RUU_VIVO_SENSE30_WWE_3.11.405.2_ROM.zip - ZIP , from this thread:
http://forum.xda-developers.com/showthread.php?t=1136463 ,
carried out full format inc dalvik wipe, and installed zip from recovery, restarted in fastboot and flashed boot image seperate and hey presto, completely unbloated gingerbread [email protected]! i now have HTC dock mode back, and there's enough memory that it doesn't take seven seconds for the camera settings screen to pop up lol...
thanks again
ÂÐÐ¥ © ™
Related
I have no idea what happened, my Hero has been rooted for over a year now and never had any problems. I flashed a herodeck rom version 1.2 and after that I could not flash any more roms but could restore all my nandroids. So I used this, RUU_Hero_C_Sprint_2.27.651.5_R_signed_release.rar, to go back to stock and installed unrevoked, and all went well. I then flashed this TeamHeroC-2.3.5-01OCT-CM-V2.zip and finally it worked and was working great until last night my battery went dead and when I plugged it in to charge it powered up to the white HTC screen and has been stuck there since. I have tried to reflash , restore nandroids, and even hboot a HERCIMG and that is when I noticed S-ON. and since this has happened every file I try to flash comes up corrupt and the latest CM rom came up no signature, and I keep getting errors such as this. So right now all I can do is boot into recovery or Hboot. Please someone help me with this. I love this phone!
williams1978 said:
I have no idea what happened, my Hero has been rooted for over a year now and never had any problems. I flashed a herodeck rom version 1.2 and after that I could not flash any more roms but could restore all my nandroids. So I used this, RUU_Hero_C_Sprint_2.27.651.5_R_signed_release.rar, to go back to stock and installed unrevoked, and all went well. I then flashed this TeamHeroC-2.3.5-01OCT-CM-V2.zip and finally it worked and was working great until last night my battery went dead and when I plugged it in to charge it powered up to the white HTC screen and has been stuck there since. I have tried to reflash , restore nandroids, and even hboot a HERCIMG and that is when I noticed S-ON. and since this has happened every file I try to flash comes up corrupt and the latest CM rom came up no signature, and I keep getting errors such as this. So right now all I can do is boot into recovery or Hboot. Please someone help me with this. I love this phone!
Click to expand...
Click to collapse
Check md5sums of the zips in your sd card to verify no corrupt files. Also make sure signature verification is not toggled in CWM.
dastin1015 said:
Check md5sums of the zips in your sd card to verify no corrupt files. Also make sure signature verification is not toggled in CWM.
Click to expand...
Click to collapse
Thanks for the advice, I will check the Md5sums but I am actually using darchstar's RA recovery at the moment. Also I have formatted my sd card a couple of times and ran disk check on it and also downloaded the roms and files several times.
Hi,
If u have the time, unroot the same way again and then reroot but this time use ROM manager(free version). Update to latest recovery and then
Start over.
It sucks but without the proper knowledge its difficult to fix some issues. So starting over is easiest.
Good luck
V'sHERO on Tapatalk
I'm having the same problem but I cant even flash the stock ROM.
blacksapphire08 said:
I'm having the same problem but I cant even flash the stock ROM.
Click to expand...
Click to collapse
Can u flash anything else?
If so, u may just have a bad download or u have to do at least a factory reset b4 flashing anything.
Good luck
Unroot zip file is also EZ if u just want stock out of the box back on ur phone.
V'sHERO on Tapatalk
vidaljs said:
Hi,
If u have the time, unroot the same way again and then reroot but this time use ROM manager(free version). Update to latest recovery and then
Start over.
It sucks but without the proper knowledge its difficult to fix some issues. So starting over is easiest.
Good luck
V'sHERO on Tapatalk
Click to expand...
Click to collapse
Again thanks for the advice but I can't even do that now as I am stuck on the HTC screen and all I can do besides look at a white HTC screen is boot recovery (darchstars RA recovery) and boot into bootloader. Everything I try to flash will not verify for some reason or another(corrupt or unsigned or something crazy like that) and the RUU will not connect to the phone because it is stuck at the white HTC screen. This one has really stumped me as I have brought this phone back from some bad predicaments, or at least I thought they were. I did get it to try and flash a hercimg of an extracted RUU that is on this forum but it ends up saying no image found and just goes back to the bootloader menu.
williams1978 said:
Again thanks for the advice but I can't even do that now as I am stuck on the HTC screen and all I can do besides look at a white HTC screen is boot recovery (darchstars RA recovery) and boot into bootloader. Everything I try to flash will not verify for some reason or another(corrupt or unsigned or something crazy like that) and the RUU will not connect to the phone because it is stuck at the white HTC screen. This one has really stumped me as I have brought this phone back from some bad predicaments, or at least I thought they were. I did get it to try and flash a hercimg of an extracted RUU that is on this forum but it ends up saying no image found and just goes back to the bootloader menu.
Click to expand...
Click to collapse
Try downloading a recovery from Dastin's thread. Rename it HERC.IMG and place in the root of the SD card. Bootloader and flash. Power down then hold home and power back up to see if recovery worked. See if you can get any recovery flashed at all and if you do you can fix anything then.
¦¦self proclaimed resident prick¦¦
I finally got clockwork recovery 2.5.0.7 by using adb to push to sd card and then flashing from adb. Still can not do anything else, it is still acting the same.
http://forum.xda-developers.com/showthread.php?t=1063843
Try this there's alot of good links.
Sent from my DROID3 using xda premium
You might want to try getting s-off via darch's method. Then flash the eng-spl. Then do a fastboot erase system -w. Then reflash your recovery to see if that helps. If you need any of the files mentioned just pm me and I'll send you a dropbox link. You should be able to get back up and running this way. Good luck.
Locked & Loaded
""Shooter on Deck""
laie1472 said:
You might want to try getting s-off via darch's method. Then flash the eng-spl. Then do a fastboot erase system -w. Then reflash your recovery to see if that helps. If you need any of the files mentioned just pm me and I'll send you a dropbox link. You should be able to get back up and running this way. Good luck.
Locked & Loaded
""Shooter on Deck""
Click to expand...
Click to collapse
Ok I downloaded 1 of the zip files for darch's eng spl because the first link sems to be down. But I transfered the zip onto my sd card with card reader/writer and computer and then flashed it with clockwork 2.5.0.7 and I now have s-off again finally. So before I do anything else I am going to wait and se what you guys think I should do now. Thanks for all the help guys
williams1978 said:
Ok I downloaded 1 of the zip files for darch's eng spl because the first link sems to be down. But I transfered the zip onto my sd card with card reader/writer and computer and then flashed it with clockwork 2.5.0.7 and I now have s-off again finally. So before I do anything else I am going to wait and se what you guys think I should do now. Thanks for all the help guys
Click to expand...
Click to collapse
Are you formatting boot, system, cache, and data before flashing any of these roms? I do it 3x for each partition to make sure everything is wiped clean.
I have always thought that unrevoked was a permanent s-off unlike darch's which is temporary. I have both. I have always felt that if i can get into recovery, I'm golden. Make sure everything is wiped (not just data and cache) before you flash a new Rom.
Sent from my wildheroc using XDA App
Drunkpilot said:
Are you formatting boot, system, cache, and data before flashing any of these roms? I do it 3x for each partition to make sure everything is wiped clean.
I have always thought that unrevoked was a permanent s-off unlike darch's which is temporary. I have both. I have always felt that if i can get into recovery, I'm golden. Make sure everything is wiped (not just data and cache) before you flash a new Rom.
Sent from my wildheroc using XDA App
Click to expand...
Click to collapse
Yes, a couple of times, manually and with Light's format and Caulkin's format. and also I tried to fastboot hercimg.zip of the extracted RUU and all was going well and it actually finally asked if I wanted to apply the update like it is suppose to and it started loading and then when it finished it rebooted hboot and tried to install it again and also at this point I had s-on again. So I redone everything and am now back to s-off.
williams1978 said:
Yes, a couple of times, manually and with Light's format and Caulkin's format. and also I tried to fastboot hercimg.zip of the extracted RUU and all was going well and it actually finally asked if I wanted to apply the update like it is suppose to and it started loading and then when it finished it rebooted hboot and tried to install it again and also at this point I had s-on again. So I redone everything and am now back to s-off.
Click to expand...
Click to collapse
Are you still on a stock "sense" rom right now? What is your PRL, Radio, and PRI? Make sure everything is updated and you should be ready to go now. Since you are S-off now, I would place a HERCIMG.zip on your sd card of a recovery (I've been liking the 4.0.1.4 Orange Lantern that Dastin compiled (which is an unofficial CWM) just so that I have it at the ready in case anything goes south.
If your s-off again make a nand if you can. Also like dp asked what rom, radio, are you on???. Also imo you should flash Ra1.7 untill your back up and running for this process and just revert back when all this is done. Also you should do a fast boot erase system -w to clear everything out. Then backup your sd to your pc and format it as well. Once threw your pc and restore the defaults and then threw your recovery. Which is y I suggest Ra it makes it quick and easy. Ill check back here to see were your at threw out the day.
Edit: Pm sent.
Locked & Loaded
""Shooter on Deck""
The last rom I was on was [ROM][03-OCT-2011][TeamHeroC-2.3.7 - 2.6.35 Kernel] but I am stuck at the white HTC screen right now has been all day. When you say RA 1.7 recovery are you talking about Darchstar's RA 1.7?
Still no luck everything I try to flash fails, I kept getting an error 5 in clockwork recovery when trying to flash CyanogenMod 7 for the HTC Hero (CDMA) :: V7.1.0 (9 Oct 2011).
williams1978 said:
The last rom I was on was [ROM][03-OCT-2011][TeamHeroC-2.3.7 - 2.6.35 Kernel] but I am stuck at the white HTC screen right now has been all day. When you say RA 1.7 recovery are you talking about Darchstar's RA 1.7?
Still no luck everything I try to flash fails, I kept getting an error 5 in clockwork recovery when trying to flash CyanogenMod 7 for the HTC Hero (CDMA) :: V7.1.0 (9 Oct 2011).
Click to expand...
Click to collapse
Yes, I am.
Locked & Loaded
""Shooter on Deck""
Okay I switched recoveries to RA 1.7. I have tried several times to flash CyanogenMod 7 for the HTC Hero (CDMA) :: V7.1.0 and each time a different file comes up corrupt but I have been checking the md5's after it is on the sd card and they have been good. It is crazy, I can flash everything but Roms.
You should do a fastboot erase system -w.
Locked & Loaded
""Shooter on Deck""
Sorry XDA, I'm new here, but I happen to have an issue when booting up the aforementioned ROM for the first time.
First off, I have a bootloader unlocked, S-ON Vivid (rooted) on a stock ROM and kernel, with WCX Recovery.
1) Extracted boot.img from the .zip file
2) Placed the .zip in the root of the internal SD card
3) Backup
4) Flashed the boot.img twice
5) Went to recovery, wiped dalvik, cache partition, and performed a factory reset
6) Immediately went to recovery and installed .zip from internal SD
7) ROM is installed, but on initial boot, hangs (not on the white HTC screen, but at the Virtuous logo).
- looking at adb logcat, it seems to loop (Sorry if I get the terminology wrong here); Fails, retries, and it repeats.
So, what am I doing wrong, or is there something that I need (or forgot) to do?
In advance, thanks for having to deal with a noob.
Were you on ics prior to ronning this procedure?
Sent from my HTC Raider 4G LTE running ICS.
Yes, I was on the latest ICS build and HBOOT.
altanimi said:
Sorry XDA, I'm new here, but I happen to have an issue when booting up the aforementioned ROM for the first time.
First off, I have a bootloader unlocked, S-ON Vivid (rooted) on a stock ROM and kernel, with WCX Recovery.
1) Extracted boot.img from the .zip file
2) Placed the .zip in the root of the internal SD card
3) Backup
4) Flashed the boot.img twice
5) Went to recovery, wiped dalvik, cache partition, and performed a factory reset
6) Immediately went to recovery and installed .zip from internal SD
7) ROM is installed, but on initial boot, hangs (not on the white HTC screen, but at the Virtuous logo).
- looking at adb logcat, it seems to loop (Sorry if I get the terminology wrong here); Fails, retries, and it repeats.
So, what am I doing wrong, or is there something that I need (or forgot) to do?
In advance, thanks for having to deal with a noob.
Click to expand...
Click to collapse
I had this issue myself only I was running twrp recovery. What I did was to flash a new recovery from fastboot (the cwm in the cubed‘s guide, I would link but I'm on my phone) then re flash the boot.img and then wipe, factory reset then flash rom. Ymmv.
Sent from my HTC PH39100 using XDA
If you're still out of luck...
In CWM, go to mounts and storage, format /system, /data, /cache, then flash the ZIP. No need to factory reset; wiping data and cache does that for you by consequence.
i installed cm10.1 and i didnt like it so decided to move on with ViperVIVO 2.5.3. my device is s-on and hboot 2.02 .before installation, i wiped data/factory reset,wiped cache partition and wiped dalvik cache from CWM and full wiped from AROMA Installer. after installation phone stuck on new htc one logo(red) i did flash boot command as well, so i decided to go back to stock rom and go with s-off first and then try it again. i restored my backup from CWM and run fastboot flash boot command, after reboot my phone stuck on htc logo(original green) for a while and went to CWM t itself after reboot. so i decided to install cm10.1 again and created a backup and try to restore it and i did restore cm10.1 backup successfully, i used the same procedure which was used in stock restore. my question are
how do i back to my stock rom so i'll continue my s-off process?
second question is, can go to s-off process from cm10.1? and after that i can go to stock rom
third, phone filesystem upgrade to EXT4 after applying the viper2.5.3, may be EXT4 is the reason my phone is not restoring the backup. i dont know what are EXT4 or EXT3. so please give me some guidance for further steps please. regards
Mr909 said:
i installed cm10.1 and i didnt like it so decided to move on with ViperVIVO 2.5.3. my device is s-on and hboot 2.02 .before installation, i wiped data/factory reset,wiped cache partition and wiped dalvik cache from CWM and full wiped from AROMA Installer. after installation phone stuck on new htc one logo(red) i did flash boot command as well, so i decided to go back to stock rom and go with s-off first and then try it again. i restored my backup from CWM and run fastboot flash boot command, after reboot my phone stuck on htc logo(original green) for a while and went to CWM t itself after reboot. so i decided to install cm10.1 again and created a backup and try to restore it and i did restore cm10.1 backup successfully, i used the same procedure which was used in stock restore. my question are
how do i back to my stock rom so i'll continue my s-off process?
second question is, can go to s-off process from cm10.1? and after that i can go to stock rom
third, phone filesystem upgrade to EXT4 after applying the viper2.5.3, may be EXT4 is the reason my phone is not restoring the backup. i dont know what are EXT4 or EXT3. so please give me some guidance for further steps please. regards
Click to expand...
Click to collapse
You can get S-Off on any ROM
I did it on ViperVIVO
Gizmo648 said:
You can get S-Off on any ROM
I did it on ViperVIVO
Click to expand...
Click to collapse
thanks mate, do u have any idea why i cant restore my stock backup which i created before ViperVivo while i can restore my cm10.1 backup which one was created after viper with same procedure??
Mr909 said:
thanks mate, do u have any idea why i cant restore my stock backup which i created before ViperVivo while i can restore my cm10.1 backup which one was created after viper with same procedure??
Click to expand...
Click to collapse
Is there an error while restoring the backup?
Some backups may fail and you are not able to restore all of it
Gizmo648 said:
Is there an error while restoring the backup?
Some backups may fail and you are not able to restore all of it
Click to expand...
Click to collapse
no error just stuck on htc logo. i used command fastboot flash boot boot.img after restoring backup. i successfully restore my stock backup when i was stuck on cm10.1 so i dont think so s there any problem in backup
lets clear few things.
1- install cm10.1 (failed)
2- restore stock backup (successful) so no problem in backup
3- install cm10.1 again (successful)
4- install ViperVivo (failed) stuck on logo
5- restore stock backup again (failed)
6- install cm10.1 again (successful)
7- create cm10.1 backup (successful)
8- restore stock backup again (failed)
9- restore cm10.1 backup (successful)
bottom line is, stock rom was created before viper means before EXT4 filesystem and cm10.1 backup was created after EXT4. now i dont know when i wiped data/factory reset,wiped cache partition and wiped dalvik cache from CWM phone is still on EXT4 or not. is there any issue with EXT4 or im think on wrong side?? need help guys.
is there any other way to go back to stock rom? regards
Mr909 said:
lets clear few things.
1- install cm10.1 (failed)
2- restore stock backup (successful) so no problem in backup
3- install cm10.1 again (successful)
4- install ViperVivo (failed) stuck on logo
5- restore stock backup again (failed)
6- install cm10.1 again (successful)
7- create cm10.1 backup (successful)
8- restore stock backup again (failed)
9- restore cm10.1 backup (successful)
bottom line is, stock rom was created before viper means before EXT4 filesystem and cm10.1 backup was created after EXT4. now i dont know when i wiped data/factory reset,wiped cache partition and wiped dalvik cache from CWM phone is still on EXT4 or not. is there any issue with EXT4 or im think on wrong side?? need help guys.
is there any other way to go back to stock rom? regards
Click to expand...
Click to collapse
You could install a RUU, that would give you a stock rom as well.
Need few more information.
HBoot Version
Did you ever changed Recovery?
Which recovery do you use actual?
And i think, if you are on S-On, recovery cant even backup a boot.img
Because with S-On, you have acces to System, data, cache, dalvik cache and the lib partition, but no acces to boot.img at all.
Silversniper said:
Need few more information.
HBoot Version
Did you ever changed Recovery?
Which recovery do you use actual?
And i think, if you are on S-On, recovery cant even backup a boot.img
Because with S-On, you have acces to System, data, cache, dalvik cache and the lib partition, but no acces to boot.img at all.
Click to expand...
Click to collapse
hboot 2.02, im using cwm, yes im on s-on, so whats the solution then
I'm following this tutorial on how to root my Orange UK GT-I9305 LTE Unlocked phone running 4.1.2.
Everything goes fine with Odin the phone reboots, then I unplug and turn off my phone, and boot into recovery mode only to find it hasn't installed and Android system recovery 3e is still there.
Any ideas what I'm doing wrong?
synthecypher said:
I'm following this tutorial on how to root my Orange UK GT-I9305 LTE Unlocked phone running 4.1.2.
Everything goes fine with Odin the phone reboots, then I unplug and turn off my phone, and boot into recovery mode only to find it hasn't installed and Android system recovery 3e is still there.
Any ideas what I'm doing wrong?
Click to expand...
Click to collapse
Not flashing as instructed is the usual .Like unzipping the file or wrong file faulty file download .
Try another recovery.
jje
JJEgan said:
Not flashing as instructed is the usual .Like unzipping the file or wrong file faulty file download .
Try another recovery.
jje
Click to expand...
Click to collapse
I did follow them to the letter, does installing CWM Recovery actually root the phone or is "rooting" the phone a different process entirely that's required for installing CWM Recovery?.
:laugh:
Phone: Samsung Galaxy S3 LTE
Model Number: GT-I9305
Build Number: JZO54K.I9305XXBMF1
synthecypher said:
I did follow them to the letter, does installing CWM Recovery actually root the phone or is "rooting" the phone a different process entirely that's required for installing CWM Recovery?.
:laugh:
Phone: Samsung Galaxy S3 LTE
Model Number: GT-I9305
Build Number: JZO54K.I9305XXBMF1
Click to expand...
Click to collapse
All depends upon the package but most CWM are root and recovery .
TRYhttp://forum.xda-developers.com/showthread.php?t=2002953
Ended up using Auto-Root which seemed to work no problem.
synthecypher said:
Ended up using Auto-Root which seemed to work no problem.
Click to expand...
Click to collapse
I initially had a rooted stock ROM that i was using for ages then upgraded to a custome ROM but for personal reasons decided to go back to stock.
Loaded stock ROM with intention of rooting only to get rid of bloatware, but not one of the ODIN Flash recoveries work at all, not one, so like you ended up using CF Auto and that worked but now im still stuck with Stock Recovery. I dont understand why none of the recoveries flash when they did before.
Cheers
trouble with cwm/ twrp
Hi all. Yes I'm a noob and I wouldn't ask If hadn't tried a plethora of ways to install either cwm or twrp.
It took me a good hour to find this thread so hope I'm in the right place.
Ok I used odin to root and cwm didn't stick so still on stock rec. However I used framaroot to get super su working and titanium says I'm all rooted up. Other apps only for root also work.
I've since tried using goo manager and Rom manager to install cwm or twrp and both say unsupported.
I've searched these here threads and found a few with same problem namely when using odin cwm wont stick and android reinstalls stock recovery.
So I'm a bit stuck, I'm rooted but have no cwm or twrp.
Any help would he much appreciated.
Try Philz recovery .
I have never used a custom recovery on this phone but i think i read somewhere that when flashing by odin the thing to do is not let odin reboot the phone. untick the reboot option. then when odin is done flashing and says pass shut down the phone . dont let it boot up.once phone is off you can boot into recovery by vol up+hom+power Here is the tricky part. as soon as you see the white samsung start to load aka bootloader screen release the power button but continue to press volume up and home. you should see the circle with the hat symbol. and enter into clockworkmod once in clockwork mod you will need to wipe data cache and dalvick DO NOT WIPE SYSTEM then flash a custom rom zip that you have previously copied to either your extsdcard or sdcard0 at the same time you probably will want to flash gapps as well. the thing is if you boot up before entering recovery . the default native recovery from samsung will take its place back. maybe it is easier to just flash rom manager in the play store. flash clockworkmod and then boot into recovery from the app itself. I9300 is supported . dont know about I9305
thanks !
ashraf sharif said:
I have never used a custom recovery on this phone but i think i read somewhere that when flashing by odin the thing to do is not let odin reboot the phone. untick the reboot option. then when odin is done flashing and says pass shut down the phone . dont let it boot up.once phone is off you can boot into recovery by vol up+hom+power Here is the tricky part. as soon as you see the white samsung start to load aka bootloader screen release the power button but continue to press volume up and home. you should see the circle with the hat symbol. and enter into clockworkmod once in clockwork mod you will need to wipe data cache and dalvick DO NOT WIPE SYSTEM then flash a custom rom zip that you have previously copied to either your extsdcard or sdcard0 at the same time you probably will want to flash gapps as well. the thing is if you boot up before entering recovery . the default native recovery from samsung will take its place back. maybe it is easier to just flash rom manager in the play store. flash clockworkmod and then boot into recovery from the app itself. I9300 is supported . dont know about I9305
Click to expand...
Click to collapse
Thats exactly how I understood the cwm not sticking problem. I have tried rom manager and said not compatable with my device as did goo manager for twrp. I think odin is the only way I get it to stick. So il flash in odin and il try to get into cwm as it boots and wipe those two files you mentioned.
But then can I just boot up as normal ? or will android try to reflash its stock rom ? Damn my phone for being so difficult
I only ask because I haven't decided what CR to use yet (or even looked for any). I was gonna get it all ready first then learn how to install a CR - 1 thing at a time i thought.
Anyway thanks for your help :good:
JJEgan I found Philz thread to be helpful but something I feel Im just not ready for. Im new to this and although the updated cwm looked cool there were just to much going on, maybe for a later day.
Thanks all the same :good:
wiping data plus cache plus dalvick cache is done to prepare your phone for the custom rom that you are going to flash. the wiping is to clean those partitions because if they are not erased you will have problems. especially if you go from one android version to another or touchwiz to aosp. it is done so you get a clean install with minimal issues. if it is not done you will most likely bootloop. effectively it is a factory reset. all of your apps and app data will be gone so you do not want to do that unless you have backed up your apps . however sometimes google automatically installs them after you sign in.
I am not sure why clockwork mod does not stick but if you copy the rom you want to your phone install clockworkmod with odin and then use clockwork mod to flas the rom and gapps package then factory reset you will not have the stock recovery anymore. but this has to be done without booting into android stock . PLEASE FOLLOW THE FLASHING INSTRUCTIONS TO THE BEST OF YOUR ABILITY. AND UNDERSTAND ANYTIME YOU FLASH OR MODIFY YOUR PHONE YOU VOID YOUR WARRANTY AND POSSIBLY CAN CAUSE IRREPARABLE DAMAGE. BEST OF LUCK!
---------- Post added at 04:28 PM ---------- Previous post was at 04:24 PM ----------
Also philz recovery is highly recommended
HERE IS SOME VERY GOOD READING http://forum.xda-developers.com/showthread.php?t=2362743&highlight=philz+recovery http://forum.xda-developers.com/showthread.php?t=2344125
think I got it lol
Ok that's sounds good. However I've just read the threads you linked and now I've got to back up my imei and NV files first or il loose them when flashing. The procedure is all there and seems doable for a noob but i read some peeps are having trouble just doing that. I really wanted to root/install a CR regardless of the troubles cos I want full access and more importantly want to learn all the ins and outs so I can get the best use from my phone so glad I found this forum cause I'm sure I would have bricked my phone otherwise.
Might I ask if I've got this right tho?
1: backup imei/NV files
2: use odin to get cwm to stick using your method
3: boot into cwm to wipe data/dalvick cache and gapps
4:use cwm to flash a CR
5:factory reset
I think that's right?
CLOSE
1 BACKUP EFS FOLDER(IT CONTAINS imeiAND SERIAL NUMBER AND OTHER NETWORK SETTINGS) MAKE AT LEAST 2 BACKUPS ONE FOR EXTERNAL SDCARD AND ONE TO KEEP ON YOUR PC
2 INSTALL CWM RECOVERY USING ANY WORKING METHOD. byTHE WAY PHILZ CAN BACKUP EFS.
3 IN CWM RECOVERY MAKE A NANDROID BACKUP OF YOU CURRENT ROM. I FORGOT TO TELL YOU THAT ,THIS IS IN CASE YOUR FLASH FAILS YOU CAN RESTORE CURRENT ROM FROM BACKUP. ALWAYS BACKUP BEFORE A FLASH
4 IN CWM RECOVERY WIPE DATA, CACHE , AND DALVIK CACHE
5 IN CWM RECOVERY FLASH ZIP FOR ROM AND FLASH ZIP FOR GAPPS "GOOGLE APPS"
6 BOOT ANDROID THIS MAY TAKE UP TO 10 MINUTES FOR THE INITIAL BOOT. BE PATIENT. IF IT BOOTS YOU ARE DONE
7 IF PHONE DOES NOT BOOT THEN IN RECOVERY WIPE DATA AND CACHE AND DALVIK AGAIN
8 STILL NOT BOOTING FLASH ROM ANG GAPPS AGAIN
NOT BOOTING? RESTORE NANDROID
FACTORY RESET=WIPE DATA AND CACHE
DONT EVER WIPE SYSTEM UNLESS YOU HAVE A RECENT NANDROID. NANDROID IS GOOD BUT THE OLDER IT IS THE MORE LIKELY IT IS TO GET CORRUPTED
ALSO IF YOU GET FORCE CLOSES FIXING PERMISSIONS USUALLY WORKS FOR THAT.
SOME ROMS ARE FLASHED IN DIFFERENT WAYS .ALWAYS FOLLOW THE DEVELOPERS INSTRUCTIONS
i had the same Problem before.
I Just disassembled the battery after a full-wipe for few minutes and it works... i don't know y, but that was the only way... ?!
brilliant thanks!
ashraf sharif said:
CLOSE
1 BACKUP EFS FOLDER(IT CONTAINS imeiAND SERIAL NUMBER AND OTHER NETWORK SETTINGS) MAKE AT LEAST 2 BACKUPS ONE FOR EXTERNAL SDCARD AND ONE TO KEEP ON YOUR PC
2 INSTALL CWM RECOVERY USING ANY WORKING METHOD. byTHE WAY PHILZ CAN BACKUP EFS.
3 IN CWM RECOVERY MAKE A NANDROID BACKUP OF YOU CURRENT ROM. I FORGOT TO TELL YOU THAT ,THIS IS IN CASE YOUR FLASH FAILS YOU CAN RESTORE CURRENT ROM FROM BACKUP. ALWAYS BACKUP BEFORE A FLASH
Am I backing up to ext SD card?
4 IN CWM RECOVERY WIPE DATA, CACHE , AND DALVIK CACHE
5 IN CWM RECOVERY FLASH ZIP FOR ROM AND FLASH ZIP FOR GAPPS "GOOGLE APPS"
Are these seperate zips?
6 BOOT ANDROID THIS MAY TAKE UP TO 10 MINUTES FOR THE INITIAL BOOT. BE PATIENT. IF IT BOOTS YOU ARE DONE
7 IF PHONE DOES NOT BOOT THEN IN RECOVERY WIPE DATA AND CACHE AND DALVIK AGAIN
8 STILL NOT BOOTING FLASH ROM ANG GAPPS AGAIN
NOT BOOTING? RESTORE NANDROID
FACTORY RESET=WIPE DATA AND CACHE
DONT EVER WIPE SYSTEM UNLESS YOU HAVE A RECENT NANDROID. NANDROID IS GOOD BUT THE OLDER IT IS THE MORE LIKELY IT IS TO GET CORRUPTED
ALSO IF YOU GET FORCE CLOSES FIXING PERMISSIONS USUALLY WORKS FOR THAT.
SOME ROMS ARE FLASHED IN DIFFERENT WAYS .ALWAYS FOLLOW THE DEVELOPERS INSTRUCTIONS
Click to expand...
Click to collapse
Thank-you for all that,I really appreciate it.
Can I ask the difference between the apps nandroid manager and titanium? I've backed up with both and wondered if i really needed to? The nandroid backup was nearly 3gb!
Also I was gona backup with qpst for imei and NV files but then read its only for US versions? Will the backup of efs folder include those?
honestly i really dont know what the differences are. l do not use custom recoveries or custom roms. i dont use titanium backup .Any rom I flash i get from sammobile.com. one reason i do not use custom roms is that none can support mhl. I use a monitor and bluetooth mouse and keyboard . without mhl I cant mirror my screen so i always stay with stock roms. i use Xposed framework for modifications.
ashraf sharif said:
I have never used a custom recovery on this phone but i think i read somewhere that when flashing by odin the thing to do is not let odin reboot the phone......
Click to expand...
Click to collapse
thx you so much. this was the secound s3 that had this issue. deactivating auto reboot did the job!!!!
My HTC One is currently unlocked at hboot 1.61, S-On, with ClockworkMod Recovery v6.0.4.6 installed. no carriers
I have a backup of the stock rom before I install any roms, and I have install SU to my device afterwards.
I was intended to install Insertcoin 7.1.3 rom, I did a factory reset/wipe caches and then install the rom via clockworkmod.
However, my device does not boot into the custom but reboot will automatically 'entering in recovery' instead,
perhaps that was to do with the S-On, or it's a failed rom I got?
Anyway, I tried to restore the stock rom backup I did, it said restore completed but it reboot into recovery still...
Now I can only able to access fastboot and recovery, I tried download and put in the by using "mounts and storage" -> "mount USB storage" on ClockworkMod, but it won't let me as it does not appear on my Windows 10 as it usually should.
Can anyone help me to solve this mystery? Ideally, I would like to get back to stock rom at least...
I only had experience on rooting from my Desire HD(retired), there's a sdcard to storage roms back then...
What I've got now is:
- a backup from clockworkmod, and I didn't copy to my PC
- a stock rom and kernel, I downloaded from internet and HTC webpage.
- a InsertCoin rom for m7
I have did some research on similar issue previously, but doesn't seems to help me out. if anyone knows the same issue has been addressed and solved in some posts, please don't hesitate to feed me with those posts, as I could have missed them by struggling on reading foreign language for the entire evening...
lastly, if i did anything idiotic through that process, please don't judge my stupidity
wailon93 said:
My HTC One is currently unlocked at hboot 1.61, S-On, with ClockworkMod Recovery v6.0.4.6 installed. no carriers
I have a backup of the stock rom before I install any roms, and I have install SU to my device afterwards.
I was intended to install Insertcoin 7.1.3 rom, I did a factory reset/wipe caches and then install the rom via clockworkmod.
However, my device does not boot into the custom but reboot will automatically 'entering in recovery' instead,
perhaps that was to do with the S-On, or it's a failed rom I got?
Anyway, I tried to restore the stock rom backup I did, it said restore completed but it reboot into recovery still...
Now I can only able to access fastboot and recovery, I tried download and put in the by using "mounts and storage" -> "mount USB storage" on ClockworkMod, but it won't let me as it does not appear on my Windows 10 as it usually should.
Can anyone help me to solve this mystery? Ideally, I would like to get back to stock rom at least...
I only had experience on rooting from my Desire HD(retired), there's a sdcard to storage roms back then...
What I've got now is:
- a backup from clockworkmod, and I didn't copy to my PC
- a stock rom and kernel, I downloaded from internet and HTC webpage.
- a InsertCoin rom for m7
I have did some research on similar issue previously, but doesn't seems to help me out. if anyone knows the same issue has been addressed and solved in some posts, please don't hesitate to feed me with those posts, as I could have missed them by struggling on reading foreign language for the entire evening...
lastly, if i did anything idiotic through that process, please don't judge my stupidity
Click to expand...
Click to collapse
Change your recovery to TWRP and flash away. If you read Insercoin thread, you would see that TWRP is recomended recovery. And that means you will loose your backup
donkeykong1 said:
Change your recovery to TWRP and flash away. If you read Insercoin thread, you would see that TWRP is recomended recovery. And that means you will loose your backup
Click to expand...
Click to collapse
Thanks for the reply, the backup is what holds me back from doing anything risky unless someone suggest me to do so, but I did risk of losing the backup and flashed TWRP. I have now successfully install InsertCoin rom, the sacrifice of the backup is well worthy. Well, at least my device can work properly, not much to lose. Doesn't seems like a big issue after all.
I also found out the problem was cause by the clockworkmod recovery. If I flashed TWRP in the first place, I could have kept a backup for my stock rom.
Anyway, a BIG thanks for your help! :good:
wailon93 said:
Thanks for the reply, the backup is what holds me back from doing anything risky unless someone suggest me to do so, but I did risk of losing the backup and flashed TWRP. I have now successfully install InsertCoin rom, the sacrifice of the backup is well worthy. Well, at least my device can work properly, not much to lose. Doesn't seems like a big issue after all.
I also found out the problem was cause by the clockworkmod recovery. If I flashed TWRP in the first place, I could have kept a backup for my stock rom.
Anyway, a BIG thanks for your help! :good:
Click to expand...
Click to collapse
You're dead right regarding recoveries! Now, all you need to do is make a backup of your ROM in TWRP for future mishaps and enjoy[emoji6]
And you're very welcome. I'm glad I could be of help