Related
Guys
I installed CM 7 successfully on my SGS using instructions here
http://www.galaxyroot.com/rom-cyanogenmod-7-for-galaxy-s-non-official/
It installed perfectly but i m not having signal. So i flashed back original JPY using ODin but phone is stuck on galaxy logo. Please advice on how to revert to original ROM?
Thanks
did you use PIT and check REPARTITION when you flashed back to JPY ??
azzledazzle said:
did you use PIT and check REPARTITION when you flashed back to JPY ??
Click to expand...
Click to collapse
No as i have one file only JPY_JPY_JPY.tar
azzledazzle said:
did you use PIT and check REPARTITION when you flashed back to JPY ??
Click to expand...
Click to collapse
As per Odin tutorial i select Pit and repartition only when i have 3 files. Can you please advice where can i get 3 files as i have one file only from samfirmware?
My I9000 is international and factory unlocked....
right well were gunna need a 3 file firmware in order to use PIT. bear with me whilst i have a look for one.
probably samfirmare.com ?
yeah just been looking on there they all seem to be 1 file
Yes samfirmware.com has 1 files only.
Are you sure if i flash with 3 files and select repartition then it will solve my problem?
install another firmware like jpjpa with 3 files and then flash xxjpy on it
Will this work?
http://forum.xda-developers.com/showthread.php?t=865701
How to extract this exe file after downloading it?
Will kies be of any help if i put phone in download mode and attach it with kies?
well im looking at a site that says do re partition with 1 file but its not recommended. http://androidadvices.com/update-samsung-galaxy-s-gt-i9000-to-froyo-xxjpy-2-2-1/
re partition should fix the problem,
zeeshee said:
Will this work?
http://forum.xda-developers.com/showthread.php?t=865701
How to extract this exe file after downloading it?
Click to expand...
Click to collapse
WOOHOO !!!! you found it lol been searching for that with no luck. if XDA says it will work.... it will work lol i have faith in XDA
How to get three files as it is only 1 exe file?
exe ?? thats weird. what happens when u run it.
it will probably just be 1 file like most firmwares. but if its on there saying its good to flash with pit then do it. have you read thru the comments ??
azzledazzle said:
exe ?? thats weird. what happens when u run it.
it will probably just be 1 file like most firmwares. but if its on there saying its good to flash with pit then do it. have you read thru the comments ??
Click to expand...
Click to collapse
Check the link in my last post. If you click on download it is downloading an exe file....
GT-I9000_I9000XXJPU_I9000XXJPU_CODE-MODEM_OSP-MID.exe
I need i need to extract it or rename it to zip to get 3 files????
zeeshee said:
Check the link in my last post. If you click on download it is downloading an exe file....
GT-I9000_I9000XXJPU_I9000XXJPU_CODE-MODEM_OSP-MID.exe
I need i need to extract it or rename it to zip to get 3 files????
Click to expand...
Click to collapse
i dont know try renaming it. im downloading it myself now so i can see whats going on
ok its self ecxtrating file..
it gave me following 2 files only
CODE_I9000XXJPU.tar.md5
MODEM_I9000XXJPU.tar.md5
Are these phone and CSC for oDin? What about PDA?
http://www.multiupload.com/PUSOOBQ8K5 download that I9000XXJPU with all 3 files flash thru odin with 512 pit
azzledazzle said:
http://www.multiupload.com/PUSOOBQ8K5 download that I9000XXJPU with all 3 files flash thru odin with 512 pit
Click to expand...
Click to collapse
Thanks. Odin is updating now.. Hope it works once done.
I just tried to flash to DarkCore_2.9.3_JVQ.tar using the Darky Rom and now these blue eyes keep coming up blinking? What do??
I tried factory reset and now the Samsung Galaxy S original startup keeps coming up again and again.... i can still go into recovery mode any help pleaseeeeee
Ok your only chance is to flash stock through odin! Go to this website and download your firmware http://www.sammobile.com/threads/17-Samsung-I9000-Galaxy-S-Firmwares.. Your then going to extract it to your desktop( I find it easier using desktop). Next download odin http://www.megaupload.com/?d=MADK0XTB, then follow this guide http://www.androidgalaxy.net/how-to-flash-a-galaxy-s-phone-back-to-stock/
Once you have that all downloaded open odin, add your PIT file tick re-partition, add your PDA,PHONE and CSC and THEN put your phone in DL mode and connect it... Don't be afraid of the thanks button
Corbin. said:
Ok your only chance is to flash stock through odin! Go to this website and download your firmware http://www.sammobile.com/threads/17-Samsung-I9000-Galaxy-S-Firmwares.. Your then going to extract it to your desktop( I find it easier using desktop). Next download odin http://www.megaupload.com/?d=MADK0XTB, then follow this guide http://www.androidgalaxy.net/how-to-flash-a-galaxy-s-phone-back-to-stock/
Once you have that all downloaded open odin, add your PIT file tick re-partition, add your PDA,PHONE and CSC and THEN put your phone in DL mode and connect it... Don't be afraid of the thanks button
Click to expand...
Click to collapse
thanks but the only problem is my phone doesn't show up in Odin?
I have recently been trying the Franco Kernel and the CF Kernel on ICS. I have had a Wifi issues with both of these, and I wanted to flash back my LQ2 stock kernel (zImage). I found this very difficult to do. I eventually used ChainFire's script, and replaced his kernel with the stock one, and flashed it from the PC.
My question is: I could have sworn that I have previously used mobile odin to flash a zImage, but now when I try it doesn't see any of the zip files, or zImages files on my card? is this correct, or should it be able to flash zImage files?
If I can't use Mobile Odin, is there an alternative for flashing zImage files that I can download from Google Play?
chriswilson_m3 said:
I have recently been trying the Franco Kernel and the CF Kernel on ICS. I have had a Wifi issues with both of these, and I wanted to flash back my LQ2 stock kernel (zImage). I found this very difficult to do. I eventually used ChainFire's script, and replaced his kernel with the stock one, and flashed it from the PC.
My question is: I could have sworn that I have previously used mobile odin to flash a zImage, but now when I try it doesn't see any of the zip files, or zImages files on my card? is this correct, or should it be able to flash zImage files?
If I can't use Mobile Odin, is there an alternative for flashing zImage files that I can download from Google Play?
Click to expand...
Click to collapse
Flash the LQ2 .tar file instead of the zImage with Mobile Odin. So extract the downloaded .rar file once and it becomes a .tar file and put it on your sd card. mobile Odin doesn`t flash zImage, cwm manager does flash it.
If I do that won't it overwrite the whole rom. I only want the kernel. I would have to reinstall all my apps and settings. It takes me hours to get everything back the way it was.
chriswilson_m3 said:
If I do that won't it overwrite the whole rom. I only want the kernel. I would have to reinstall all my apps and settings. It takes me hours to get everything back the way it was.
Click to expand...
Click to collapse
It will flash only the kernel, also choose wipe cache when flashing. You will loose nothing.
If you want to flash stock kernel only then you can use PC Odin too.(you shud have kernel in .tar), you need to place kernel .tar file for selecting PDA in Odin.
Mobile odin can flash zImage file.
none of above said erase data.
dr.ketan said:
If you want to flash stock kernel only then you can use PC Odin too.(you shud have kernel in .tar)
Mobile odin can flash zImage file.
Click to expand...
Click to collapse
Didn`t know that of the zImage and Mobile Odin, thanks. We learn every day
Absolutely, N nowhere else better thn on XDA to learn.
dr.ketan said:
Absolutely, N nowhere else better thn on XDA to learn.
Click to expand...
Click to collapse
Can we flash a rooted kernel in PC Odin in a non rooted device? Is there a rooted kernel in tar format?
it will raise flash counter. look to speedmod kernel for ics, having tar. counter you can reset with triangleaway
i hav never used any time, read properly before flashing.
Sent from my GT-N7000 using xda premium
Serpentinefire76 said:
Can we flash a rooted kernel in PC Odin in a non rooted device? Is there a rooted kernel in tar format?
Click to expand...
Click to collapse
Yes you can, i would take CF Root wich has root, busybox and cwm recovery. But it will increase the flash counter and shows a yellow triangle. With this method however no flash counter/triangle http://forum.xda-developers.com/showthread.php?t=1329360.
---------- Post added at 12:43 PM ---------- Previous post was at 12:41 PM ----------
dr.ketan said:
it will raise flash counter. look to speedmod kernel for ics, having tar. counter you can reset with triangleaway
i hav never used any time, read properly before flashing.
Sent from my GT-N7000 using xda premium
Click to expand...
Click to collapse
As far as i know Triangle Away only works properly on CM9, correct me if i`am wrong.
gee2012 said:
Yes you can, i would take CF Root wich has root, busybox and cwm recovery. But it will increase the flash counter and shows a yellow triangle. With this method however no flash counter/triangle http://forum.xda-developers.com/showthread.php?t=1329360.
---------- Post added at 12:43 PM ---------- Previous post was at 12:41 PM ----------
As far as i know Triangle Away only works properly on CM9, correct me if i`am wrong.
Click to expand...
Click to collapse
So, that's the catch-the triangle. I would supposed Dr. Ketan's procedure is also applicable to rooting GB?
I've been using initial CF root flasher
gee2012 said:
As far as i know Triangle Away only works properly on CM9, correct me if i`am wrong.
Click to expand...
Click to collapse
new version of TriangleAway released, works on ics stocks too.
Sent from my GT-N7000 using xda premium
dr.ketan said:
If you want to flash stock kernel only then you can use PC Odin too.(you shud have kernel in .tar), you need to place kernel .tar file for selecting PDA in Odin.
Mobile odin can flash zImage file.
none of above said erase data.
Click to expand...
Click to collapse
Dr Ketan, I have a couple of questions about what you have said which I would be really grateful if you would clarify:
In the stock rom, when I drill into the .tar file I have a number of files e.g. cache.img, factoryfs.img, hidden.img, modem.bin, and the zImage. Both Odin and Mobile Odin can only see the .tar file (which contains everything). If I extract the zImage, Odin and Mobile Odin cannot see it as an individual file, it has to be bundled up with the others in the .tar file.
If I use Odin to flash that file, it is the whole Rom, so won't it wipe my phone like a factory re-set?
When I try to use mobile Odin, you say I can flash a zImage file, but even though I have one on the SD card, it cannot see them. Mobile Odin just shows me all folders, and I cannot select an individual zImage file, or any zip files? I guess it can only see whole .tar files and not individual files?
Can you please advise me?
ok
now pc odin
here you can flash with tar only.
pc odin gives you option to flash separate modem and csc but not kernel if you select full Rom file.
but if you have kerenl file in tar file then you can flash it using pda in odin to flash kernel separately.
now in mobile odin.
you can flash kernel modem or csc individually with raw file or tar or zip.
dont know why you are getting error, otherwise it gives you option to glash zimage too.
just to add, in mobile odin you have not to select open file option but you hav to select kernel tab
then point it to zimage file.
Sent from my GT-N7000 using xda premium
dr.ketan said:
ok
now pc odin
here you can flash with tar only.
pc odin gives you option to flash separate modem and csc but not kernel if you select full Rom file.
but if you have kerenl file in tar file then you can flash it using pda in odin to flash kernel separately.
now in mobile odin.
you can flash kernel modem or csc individually with raw file or tar or zip.
dont know why you are getting error, otherwise it gives you option to glash zimage too.
just to add, in mobile odin you have not to select open file option but you hav to select kernel tab
then point it to zimage file.
Sent from my GT-N7000 using xda premium
Click to expand...
Click to collapse
Thank you my friend. your advice has really helped me. My issue in Mobile Odin was caused because I had renamed the zImage file to StockzImage (because I had some custom ones there with different names in the same directory. Mobile Odin was specifically looking for a file with the name zImage
dr.ketan said:
ok
now pc odin
here you can flash with tar only.
pc odin gives you option to flash separate modem and csc but not kernel if you select full Rom file.
but if you have kerenl file in tar file then you can flash it using pda in odin to flash kernel separately.
now in mobile odin.
you can flash kernel modem or csc individually with raw file or tar or zip.
dont know why you are getting error, otherwise it gives you option to glash zimage too.
just to add, in mobile odin you have not to select open file option but you hav to select kernel tab
then point it to zimage file.
Sent from my GT-N7000 using xda premium
Click to expand...
Click to collapse
Dr ketan, any idea if Mobile odin supported on S2-LTE I9210?
Here is list of supported device
http://forum.xda-developers.com/showthread.php?t=1347899
i was on indian stock rom with kernel jv9so inorder to root i flashed cf root and it was working perfectly fi9
i went to recovery made a backup of my current rom (nandroid backup)
later from recovery i installed doc master aokp
and as i found it very laggy
i went to cwm and restored the backup
but now the phone is stuck in the splash screen i9000
so i tried flashing my stock rom back
but now its in a bootloop (the s screen bootloops)
after flashin the stock rom
in ma phone i c dis messgae in red
E: copy_dbdata_media:Can't mount DBDATA
How do i fix it
neerajganga said:
i was on indian stock rom with kernel jv9so inorder to root i flashed cf root and it was working perfectly fi9
i went to recovery made a backup of my current rom (nandroid backup)
later from recovery i installed doc master aokp
and as i found it very laggy
i went to cwm and restored the backup
but now the phone is stuck in the splash screen i9000
so i tried flashing my stock rom back
but now its in a bootloop (the s screen bootloops)
after flashin the stock rom
in ma phone i c dis messgae in red
E: copy_dbdata_media:Can't mount DBDATA
How do i fix it
Click to expand...
Click to collapse
Did you reflash your ROM with a pit file as well, because aokp uses a different file partition set up so pit is necessary when going back to stock
slaphead20 said:
Did you reflash your ROM with a pit file as well, because aokp uses a different file partition set up so pit is necessary when going back to stock
Click to expand...
Click to collapse
hmm
k
i din try flashing pit as i believe flashing pit is risky
can u gimme the pit file
and my stock rom package has only 1 file which i flash in pda
so if i am flashing pit
can u temme how do i go about
is it jus flashing pit (with repartition ticked or untick)
or
flashing pit with the pda file as i just have single file in stock rom package
neerajganga said:
hmm
k
i din try flashing pit as i believe flashing pit is risky
can u gimme the pit file
and my stock rom package has only 1 file which i flash in pda
so if i am flashing pit
can u temme how do i go about
is it jus flashing pit (with repartition ticked or untick)
or
flashing pit with the pda file as i just have single file in stock rom package
Click to expand...
Click to collapse
Whenever you flash with pit always tick repartition, if you open up the file you flashed you should be able to see if there is a pit in there, if not go to samfirmware.com and you will find pit files over there
slaphead20 said:
Whenever you flash with pit always tick repartition, if you open up the file you flashed you should be able to see if there is a pit in there, if not go to samfirmware.com and you will find pit files over there
Click to expand...
Click to collapse
i downloaded the stock from checkfus
and
i don think i have a pit in that
in the file it downloaded it has 1 tar file and a 1 file ss_dl.dll
and wen i open the tar file
it has
cache.rfs
modem.bin
boot.bin
factoryfs.rfs
param.lfs
sbl.bin
zImage
edit : also download the file from samfirmware it also has the same files
Grab a pit file then and flash it as well, and all should be good
slaphead20 said:
Grab a pit file then and flash it as well, and all should be good
Click to expand...
Click to collapse
alrite
but
do i have to flash the pit and the rom together
or flash pit first
and then after reboot i have to flash the rom
Flash them together
slaphead20 said:
Flash them together
Click to expand...
Click to collapse
will try 2mrw
and get back to u
neerajganga said:
will try 2mrw
and get back to u
Click to expand...
Click to collapse
Ok, good luck
neerajganga said:
i downloaded the stock from checkfus
and
i don think i have a pit in that
in the file it downloaded it has 1 tar file and a 1 file ss_dl.dll
and wen i open the tar file
it has
cache.rfs
modem.bin
boot.bin
factoryfs.rfs
param.lfs
sbl.bin
zImage
edit : also download the file from samfirmware it also has the same files
Click to expand...
Click to collapse
If you use pit and tick repartition using this ROM it will not work. For repartition you need dbdata inside the compressed ROM.
You can pick any ROM that have the dbdata and merge with your stock ROM to do a repartition and get your phone up and running again!!
Good luck
Sent from my GT-I9000 using xda app-developers app
leonardoafa said:
If you use pit and tick repartition using this ROM it will not work. For repartition you need dbdata inside the compressed ROM.
You can pick any ROM that have the dbdata and merge with your stock ROM to do a repartition and get your phone up and running again!!
Good luck
Sent from my GT-I9000 using xda app-developers app
Click to expand...
Click to collapse
where do i get this dbdata from
its not there in stock rom or doc master rom which i had flashed earlier
Please close this thread
neerajganga said:
Please close this thread
Click to expand...
Click to collapse
Done
so my galaxy note is rooted and was working fine until yesterday i plugged it in for charge and then when i took it off and tryed to turn it on it would not turn on it just comes up with the samsung galaxy note n7000 logo and when i press the 3 button combo it comes with WARNING!! a custom os can cause crictical blah blah and press volume up to contine and down to restart it's not coming with android recovery?
I would heavily appreciate any help as this is my daily driver!
Thanks
Download mode is Volume DOWN + Home + Power
Recovery mode is Volume UP + Home + Power
Make sure you are doing the right combination.
azzledazzle said:
Download mode is Volume DOWN + Home + Power
Recovery mode is Volume UP + Home + Power
Make sure you are doing the right combination.
Click to expand...
Click to collapse
Oh ****. Yeah i got it wrong lol Thanks for that mate!
right i've done it right this time and i wiped cache partition and davlik cache but it is still stuck on the galaxy note logo. help?
were you on ICS or GB ??
Id suggest to try and flash stock GB via ODIN, and if it still fails to boot, send it off for repair to Samsung
Flash any gb stock rom via odin...
Sent from my GT-N7000 using XDA Premium App
I'm on ICS and it's the official version i'd rather not send it to samsung as it is rooted but how do i flash a new rom with odin any main steps or tuts?
Thanks for replying!
http://forum.xda-developers.com/showthread.php?t=1424997
Download ICS from there, As well as odin, Load all files into odin and connect phone in Download mode, Hit start and job done
azzledazzle said:
http://forum.xda-developers.com/showthread.php?t=1424997
Download ICS from there, As well as odin, Load all files into odin and connect phone in Download mode, Hit start and job done
Click to expand...
Click to collapse
Thank your very much. I'm Downloading now, i'll post back how i get on!
azzledazzle said:
http://forum.xda-developers.com/showthread.php?t=1424997
Download ICS from there, As well as odin, Load all files into odin and connect phone in Download mode, Hit start and job done
Click to expand...
Click to collapse
Sorry for being such a noob but i have downloaded both files and connected phone with laptop and odin where do i load the file that i have downloaded?
if it is one single file then it will go into the PDA section. If it comes in 3 files it will go in the respective section, i.e PDA, Phone, CSC.
do not select pit or repartition
azzledazzle said:
if it is one single file then it will go into the PDA section. If it comes in 3 files it will go in the respective section, i.e PDA, Phone, CSC.
do not select pit or repartition
Click to expand...
Click to collapse
It's a ZIP file and PDA requires a .tar file?
open it up There will be a .tar file inside it, Extract it and then load it into odin
I would highly recommend to flash Stock GB rom. Root it and flash any custom rom you want to..
You can find all GB stock Roms here :-
http://forum.xda-developers.com/showthread.php?t=1424997
How to install :-
Check here :- http://forum.xda-developers.com/showthread.php?t=1329360
Hope it helps.....
azzledazzle said:
open it up There will be a .tar file inside it, Extract it and then load it into odin
Click to expand...
Click to collapse
:silly: me!
done it now it's installing Thanks you very much people! appreciate your help!