HELP!!! - Galaxy S I9000 Q&A, Help & Troubleshooting

I just tried to flash to DarkCore_2.9.3_JVQ.tar using the Darky Rom and now these blue eyes keep coming up blinking? What do??

I tried factory reset and now the Samsung Galaxy S original startup keeps coming up again and again.... i can still go into recovery mode any help pleaseeeeee

Ok your only chance is to flash stock through odin! Go to this website and download your firmware http://www.sammobile.com/threads/17-Samsung-I9000-Galaxy-S-Firmwares.. Your then going to extract it to your desktop( I find it easier using desktop). Next download odin http://www.megaupload.com/?d=MADK0XTB, then follow this guide http://www.androidgalaxy.net/how-to-flash-a-galaxy-s-phone-back-to-stock/
Once you have that all downloaded open odin, add your PIT file tick re-partition, add your PDA,PHONE and CSC and THEN put your phone in DL mode and connect it... Don't be afraid of the thanks button

Corbin. said:
Ok your only chance is to flash stock through odin! Go to this website and download your firmware http://www.sammobile.com/threads/17-Samsung-I9000-Galaxy-S-Firmwares.. Your then going to extract it to your desktop( I find it easier using desktop). Next download odin http://www.megaupload.com/?d=MADK0XTB, then follow this guide http://www.androidgalaxy.net/how-to-flash-a-galaxy-s-phone-back-to-stock/
Once you have that all downloaded open odin, add your PIT file tick re-partition, add your PDA,PHONE and CSC and THEN put your phone in DL mode and connect it... Don't be afraid of the thanks button
Click to expand...
Click to collapse
thanks but the only problem is my phone doesn't show up in Odin?

Related

[Q] How to flash ddjg4 thru odin? Right now i m using JPH in India...Pls help guys...

Guys right now i m using JPH in India...to avail warranty i need to get back to DDJG4 which is the official software thru kies...pls help me how to get back to DDJG4 thru ODIN and pls give in details...sorry but i m new so i dont knw the method...tnx...
justsimple1 said:
Guys right now i m using JPH in India...to avail warranty i need to get back to DDJG4 which is the official software thru kies...pls help me how to get back to DDJG4 thru ODIN and pls give in details...sorry but i m new so i dont knw the method...tnx...
Click to expand...
Click to collapse
Download stock firmware from http://www.samfirmware.webs.com/
Download ODIN and keep ur phone in download mode....
connect ur phone to PC...
use odin and take ur downloaded firmware in it and select repartition and press start over that's it.........
kingharsha said:
Download stock firmware from http://www.samfirmware.webs.com/
Download ODIN and keep ur phone in download mode....
connect ur phone to PC...
use odin and take ur downloaded firmware in it and select repartition and press start over that's it.........
Click to expand...
Click to collapse
tnx...ill try this...bt in wat file should i take the download firmware...i mean pit? pda? modem?...???
Hey justsimple1
Dost rush through things if you are using odin for the first time.
Gather as much info as you can by reading through forum and clear all the doubts
Download firmware and 512.pit file from samfirmware.com and extract
Steps (Which I follow)
start Odin (if on vista/7 right click and start as administrator)
Tick Re-Partition
select 512.pit file
Put phone in download mode (VLm Down + home + power)
Plug in the phone and wait until Odin finds it.
Click "Start"
after some time Odin will display "Reset"
Wait until Odin indicates "Pass".
Plug out your phone, remove the battery, put it back in and put phone to download mode again.
Click "Reset" button in Odin and untick "Re-Partition" box.
DO NOT select PIT file again.
if you have ony one .tar file then click PDA and select file
if three files them
Click "PDA" and select CODE file.
Click "MODEM" and select MODEM file.
Click "CSC" and select CSC file.
Plug in the phone and wait until Odin finds it.
Click "Start" button and wait until phone reboots with the new software version.
This method was originally posted by Richthofen (all credits to him), I have used it sucessfully over several flashes.
Which version of odin is bestv and is there an official site to download it from
Sent from my GT-I9000M using XDA App

[Q] Help, phone stuck booting?!

I flashed darky's rom with the voodoo lag fix and then stupidly tried to flash over the top my recovery file. now its stuck loading. can't access recovery mode but can access download mode... any ideas?
Just posted this in another thread, with similar issues, try this, should fix it.
--------------------------------
HI,
Try the following, worked for me
1) Go into recovery mode and wipe both cache and partition data
2) go to samfirmware.com and download the original rom for your phone (the one that came with it)... since you don't say what region you're from, I'll give you an example with mine. Mine is from Bell, and factory comes with UGJH2, so i downloaded that with ODIN and the PIT FILE, make sure to extract the TAR file from inside the RAR file. Put all 3 files in the same folder
3) Enter download mode, when the phone is in that state sometimes it's hard to access download, best way is... remove the battery, put it back in, then hold VOL DN + HOME + POWER until you see a working android bot inside a triangle. When you see that, connect your phone to your PC, double click on ODIN, then load the PIT file (CHECK BOX RE-PARTITION leave the others to default) and Select PDA and find the TAR file you extracted in STEP 2... then click on START, it's gonna take a few mins, and even after it's done, it's going to reboot, and it'll stay at the "S" logo for a bit, leave it, then it'll boot.
At least we hope it will.
Keep us posted,
Thank you,
Rodi.
------------------------------------
Can't get into recovery mode only download mode?! I'm on orange uk custom galaxy S Rom 2.1 originally. shall i just follow your steps but use a stock samsung android firmware?
Thanks Alot btw!
Yeah keep going with the download mode, it's very possible that the recovery mode process is not even necessary, but since I have no way of testing, it's doesn't hurt to try.
so get the orig rom, with pit associated with its (u'll see in on sam firmware which pit you need, most likely 512 for stock out of the box).
Keep us posted
Rodi
Fixed!!! flashed the new 2.2.1 firmware as well. is flying thanks for the help
alcurtis93 said:
Fixed!!! flashed the new 2.2.1 firmware as well. is flying thanks for the help
Click to expand...
Click to collapse
i have the same problem as u ..which 2.2.1 firmware did u flash and where to download ?
Cris
Dont worry mate easier to fix than I thought. Go to samfirmwares and go to firmware section and galaxy s and its called I9000 jpu. If you need any more help dont be afraid to ask
Sent from my GT-I9000 using XDA App
Heres the link.... http://www.multiupload.com/PUSOOBQ8K5
Password is samfirmware.com
Sent from my GT-I9000 using XDA App
alcurtis93 said:
Heres the link.... http://www.multiupload.com/PUSOOBQ8K5
Password is samfirmware.com
Sent from my GT-I9000 using XDA App
Click to expand...
Click to collapse
Thanks so u much

[Q] need help urgent pls............

my i9000 got stuck in galaxy gt i90000 logo....
how to boot it again with diferent rom.......
it can get in to downloade mode......
need help and steps to flash a rom i am from india ........
You can find instructions on www.samfirmware.com. Just go to the rom download page. You will need to create an account first.
Anyway, it's quite straight forward. Open Odin, plug your phone into your PC with download mode on. Put the pit file in pit, the pda file in pda, phone in phone and csc in csc. (Some roms only have a single file instead of 3. That means the phone and csc is combined with pda, so just put that in pda). Leave partition unchecked. Flash.
snapper.fishes said:
You can find instructions on www.samfirmware.com. Just go to the rom download page. You will need to create an account first.
Anyway, it's quite straight forward. Open Odin, plug your phone into your PC with download mode on. Put the pit file in pit, the pda file in pda, phone in phone and csc in csc. (Some roms only have a single file instead of 3. That means the phone and csc is combined with pda, so just put that in pda). Leave partition unchecked. Flash.
Click to expand...
Click to collapse
actualy i tried to flash this stock firmware I9000DXJPE
after this only it got stuck ther..........
all the steps u told where done
but i will try the site you told thanks for the responce dude............
snapper.fishes said:
You can find instructions on www.samfirmware.com. Just go to the rom download page. You will need to create an account first.
Anyway, it's quite straight forward. Open Odin, plug your phone into your PC with download mode on. Put the pit file in pit, the pda file in pda, phone in phone and csc in csc. (Some roms only have a single file instead of 3. That means the phone and csc is combined with pda, so just put that in pda). Leave partition unchecked. Flash.
Click to expand...
Click to collapse
done it still the same pls help..................................
you must be doing something wrong... if download mode works then it should be able to flash a ROM. try this http://forum.xda-developers.com/showthread.php?p=10860237

odin failed!

Hi, i have galaxy tab:
PDA: XWJMG
PHONE: XXJMA
Now i started ODIN 1.7 and selected p1000-mck-r3-ext4-cwm.tar in PDA. I didnt select Re-Partition and did not tick anything and did not select PIT file. Now when i connect it says 'added' and when i click on start it goes through the process and says "failed' in the end. Now my tab shows yellow triangle on it. Help
Do you by any chance have locked bootloaders? Anyway as long as the computer recognizes your tab you can fix it. Just use search.
Sent from my Desire HD using XDA App
Robi-K said:
Do you by any chance have locked bootloaders? Anyway as long as the computer recognizes your tab you can fix it. Just use search.
Sent from my Desire HD using XDA App
Click to expand...
Click to collapse
I dont know about bootloader, its an untouched piece. Please tell me how to fix this tab... :-(
Look at the stickyes in the gsm tab development. Just download a rom that doesn't contain bootloaders and flash it via odin. Again you can find such roms in the development section. Read read and read again and you will be able to fix your tab. One question, why did you flash your tab in the first place?
Sent from my Desire HD using XDA App
Download this firmware http://files.deodexed.com/ModADroid-Galaxy-Tablet/Rotohammer/JME/
Then goto http://forum.xda-developers.com/showthread.php?t=932082 & read the bit where it says if your tab does not boot...
Hope this helps
Mark
You need to dload the P1 hidden pit & full J4 version fw
Is it maybe because the rom you selected says cwm? Isn't that supposed to be flashed in clockwork mod?
Thanks guys for all your help, i flashed pit to my phone via ODIN and piece is alive and working now and gave the tab back to my friend. Now just need to know for the future i have ODIN v1.31 and P1_EUR.pit. I selected pit and P1000JPJJ2 on PDA. Now just need to know before flashing do i need to select repartition?
As i read through the tutorial you only select repartition when you are flashing with the pit file!
If you are installing firmware, Flash the custom kernel that is linked on the same page as the overcome rom 2.13 without partition, Then hold vol up and power will put you in recovery mode, You can flash the rom through there useing the install zip from sdcard option but you must copy the custom rom onto the sd card first....
Regards
Mark
slyevo said:
As i read through the tutorial you only select repartition when you are flashing with the pit file!
If you are installing firmware, Flash the custom kernel that is linked on the same page as the overcome rom 2.13 without partition, Then hold vol up and power will put you in recovery mode, You can flash the rom through there useing the install zip from sdcard option but you must copy the custom rom onto the sd card first....
Regards
Mark
Click to expand...
Click to collapse
Well, i know how to flash custom rom, just wanted to flash the firmware through odin since it seems easier...i downloaded P1000JPJJ2 from the following site and it says no repartition, my problem solved..thanks anyway
http://www.thegalaxytabforum.com/index.php?/topic/112-samsung-galaxy-tab-firmware-list/
i have the same problem like the first post. I am using P1000 for asia (malaysia). now i can do nothing with my tab but odin still able to detect it. anyone could help forward me the link for the said rom without bootloader. the link given in the previous post already dead.
andrew21 said:
Hi, i have galaxy tab:
PDA: XWJMG
PHONE: XXJMA
Now i started ODIN 1.7 and selected p1000-mck-r3-ext4-cwm.tar in PDA. I didnt select Re-Partition and did not tick anything and did not select PIT file. Now when i connect it says 'added' and when i click on start it goes through the process and says "failed' in the end. Now my tab shows yellow triangle on it. Help
Click to expand...
Click to collapse
I had the same problem earlier and then i learned that bootloader for stock JM is signed so it show error ... completion (write) failed ... when you try to upgrade or install custom rom using Odin. I reverted back to resurrect my tab by Odin with pit (follow pit version) and check repartition, auto reboot. It works for me but not sure if it will work for others. Good luck.

Galaxy note unexpectedly broke?

so my galaxy note is rooted and was working fine until yesterday i plugged it in for charge and then when i took it off and tryed to turn it on it would not turn on it just comes up with the samsung galaxy note n7000 logo and when i press the 3 button combo it comes with WARNING!! a custom os can cause crictical blah blah and press volume up to contine and down to restart it's not coming with android recovery?
I would heavily appreciate any help as this is my daily driver!
Thanks
Download mode is Volume DOWN + Home + Power
Recovery mode is Volume UP + Home + Power
Make sure you are doing the right combination.
azzledazzle said:
Download mode is Volume DOWN + Home + Power
Recovery mode is Volume UP + Home + Power
Make sure you are doing the right combination.
Click to expand...
Click to collapse
Oh ****. Yeah i got it wrong lol Thanks for that mate!
right i've done it right this time and i wiped cache partition and davlik cache but it is still stuck on the galaxy note logo. help?
were you on ICS or GB ??
Id suggest to try and flash stock GB via ODIN, and if it still fails to boot, send it off for repair to Samsung
Flash any gb stock rom via odin...
Sent from my GT-N7000 using XDA Premium App
I'm on ICS and it's the official version i'd rather not send it to samsung as it is rooted but how do i flash a new rom with odin any main steps or tuts?
Thanks for replying!
http://forum.xda-developers.com/showthread.php?t=1424997
Download ICS from there, As well as odin, Load all files into odin and connect phone in Download mode, Hit start and job done
azzledazzle said:
http://forum.xda-developers.com/showthread.php?t=1424997
Download ICS from there, As well as odin, Load all files into odin and connect phone in Download mode, Hit start and job done
Click to expand...
Click to collapse
Thank your very much. I'm Downloading now, i'll post back how i get on!
azzledazzle said:
http://forum.xda-developers.com/showthread.php?t=1424997
Download ICS from there, As well as odin, Load all files into odin and connect phone in Download mode, Hit start and job done
Click to expand...
Click to collapse
Sorry for being such a noob but i have downloaded both files and connected phone with laptop and odin where do i load the file that i have downloaded?
if it is one single file then it will go into the PDA section. If it comes in 3 files it will go in the respective section, i.e PDA, Phone, CSC.
do not select pit or repartition
azzledazzle said:
if it is one single file then it will go into the PDA section. If it comes in 3 files it will go in the respective section, i.e PDA, Phone, CSC.
do not select pit or repartition
Click to expand...
Click to collapse
It's a ZIP file and PDA requires a .tar file?
open it up There will be a .tar file inside it, Extract it and then load it into odin
I would highly recommend to flash Stock GB rom. Root it and flash any custom rom you want to..
You can find all GB stock Roms here :-
http://forum.xda-developers.com/showthread.php?t=1424997
How to install :-
Check here :- http://forum.xda-developers.com/showthread.php?t=1329360
Hope it helps.....
azzledazzle said:
open it up There will be a .tar file inside it, Extract it and then load it into odin
Click to expand...
Click to collapse
:silly: me!
done it now it's installing Thanks you very much people! appreciate your help!

Categories

Resources