Help! Can't come into Download Mode! SGS+ - Galaxy S I9000 Q&A, Help & Troubleshooting

Hallo people. I’m at first time here. I’m from Germany and I’m sorry directly for my bad English.
I have a trouble with my Samsung Galaxy S Plus and I hope anybody can help me.
I have installed the FeaMod Recovery on my SGS+. After them my SGS+ started everytime in FeaMod Recovery. OK, famous problem, but I can’t get started my Phone in Download Mode to! I fixed this problem with the JIG like this one:
http://forum.xda-developers.com/wiki/Samsung_Galaxy_S_Plus/GT-I9001#Soft-Bricked
I flashed an Stock ROM completly new. Now i get started my device normaly with Stock ROM and Stock Recovery but I still can't get my device put into the Download Mode (with the 3 button way).
If I try this, I get the Samsung lable on my screen, than two or three glowing pixels in the left top corner for a second. Then come blackscreen (i think i get my phone shortly off) and then comes the Samsung logo again. And this loops.
Here is a short video to anderstend better what I mean:
http://dl.dropbox.com/u/8253771/SGSPlus.wmv
Is enybody knows here, what does this pixels mean? And how can i fixed this, to put my device into the Download Mode with a three buttons way, again?

Nobody know this problem?

Download adb ( use search function )
Conncect phone to pc.
Open CMD (Comandprompt)
Enter: ADB reboot download
wait
Your phone will reboot in download.
Have fun

mrjraider said:
Download adb ( use search function )
Conncect phone to pc.
Open CMD (Comandprompt)
Enter: ADB reboot download
wait
Your phone will reboot in download.
Have fun
Click to expand...
Click to collapse
I can get my SGS+ into Downloadmode with the Jig Stick. But how can I fix this problem that I get it into Download mode wit the 3-button combination?
And what does this pixels mean?

Related

HELP !! Wont boot after using odin3 !!

I tried flashing my SGS to Froyo. I used Odin3 1.3. But now my phone wont boot, i just get a screen with a phone showing that it cant connect to pc... ''Phone''..!..''PC''
Please help
deranqed said:
I tried flashing my SGS to Froyo. I used Odin3 1.3. But now my phone wont boot, i just get a screen with a phone showing that it cant connect to pc... ''Phone''..!..''PC''
Please help
Click to expand...
Click to collapse
Put the phone back into download mode and flash with another firmware and Odin 1.0
I just had the same problem, took out the battery, restarted into download mode and updated successfully using kies.
i cant get into download mode, i have only been albe to do that through ADB. And when i plug my SGS into my pc nothing happens, it just has the same picture on the phone...
It seems your phone is stuck in download mode:
- remove phone from pc
- restart odin
- mark reboot phone
- connect phone
- if the com port shows up you can hit "start"
hope this works
When this this advice from the (also) Austrian Guy don't help but the Batterie out and wait 10 Seconds.. And then go back to download mode should help..
It's probably bricked like mine, I mean, if you were unable to access download mode with the button combination (Vol-/Home/Power) and you only had access to download mode with adb. I just sent mine to repair today.
My recommendation to everyone is that NEVER flash your phone if you are unable to access download mode with the button combination as it will be rather hard to adb reboot it again to download mode if you don't have access with adb to it
Probably someone comes to say that "I have flashed many times with adb reboot download method and my phone is still fine" but even so, it is not safe to do that.

[Q] Captivate With I9000 Firmware Stuck in Recovery Mode

There have been those that run into problems after installing the XXJP3I9000 update on the Samsung Captivate and attempt to reboot into recovery mode. The issue that they have is that since the Captivate has no physical home button to select an option like you can with the Galaxy S, you can't select an option, and therefore you can't reboot your device regularly. While I am in this same problem and have not figured out a solution, I have started this thread to post what knowledge I have about this issue so that others may help get this issue figured out. If anyone has information on how to fix this problem, please comment below. Let's fix this!
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
First of all, the key combinations that standardly would work with the original captivate firmware will not work anymore. Pressing all three buttons (Vol+, Vol - and Power) will only power cycle the phone, that is, until you let up on the buttons. Pressing Vol+ and Vol- and then plugging your phone into the computer will also do nothing. (By nothing I mean will take you back to the recovery menu)
Every key combination will only take you back to the recovery menu, so key combinations seem to be out.
If you boot into recovery mode, take out the battery and put it back in, all the while keeping the phone plugged in to the computer, the phone will enter the "POWER RESET OR UNKNOWN UPLOAD MODE", which will show your device in windows as being a Samsung USB Composite Device and a Samsung Mobile Modem (gadget serial, Windows 7) While this may be helpful, you cannot run ODIN or ADB in this mode, nor does this allow disk access. If you have Samsung Kies installed, it will detect a device, but will never complete loading it.
Other information with this method: On the phone screen, as well as showing "POWER RESET OR UNKNOWN UPLOAD DEVICE" the screen will also show the following in red:
RST_STAT =0X1
PMIC_IRQ1 =0X0
PMIC_IRQ2 =0x0
PMIC_IRQ3 =0x4
PMIC_STATUS1 =0x40
PMIC_STATUS2 =0x2c
If this helps anybody, it was a pleasure
Another method I found briefly was that after installing Kies, and rebooting the phone into recovery mode (again) my computer detected four new devices, two of them being Samsung Android devices and one being a disk drive. Potentially, without freezing or error, the drivers that are included with the Kies software will detect and allow for disk management while the phone is in recovery mode. Three of the four devices installed without error for me, but the fourth, the actual Android device, continued to say "installing device" until I unplugged the phone out of frustration. It has since not detected those four devices again, and I have yet to figure out how to do that again. The nice thing about that was that although the adb.exe reboot download command did not work, adb.exe did detect the phone. if this is true then rebooting normally or into download mode should be easy.
The last thing I noticed is that button furthest to the left on the main screen on the captivate will close the recovery menu when pressed, and leave the background behind, and then will reopen the recovery menu when pressed again. This is showing me that the four touch buttons are operable, but not configured. If it were possible to reconfigure the actions that pressing these buttons do, then it would be easy to be able to reboot the device normally.
I have compiled information to the best of my ability, and here is a question to ask, that I think will help solve the problem. Can the captivate with I9000 2.2 software run adb in recovery mode?
Comments, Questions, and Most of all, answers would be appreciated for me, as well as for other users with the same problem as I. Hopefully, this thread can be the solving point for this problem.
Many Thanks,
TouchofDestiny
The n00b who isn't a n00b at all
An Update: The reason that the combinations don't work for me or either people is because they (and I) fail to install the captivate kernel, and that is making the volume power button controls useless.
same here i put froyo from the galaxy s i9000 and i cant change the rom or get into recoverymode because buttons dont work man this sucks and 3G or Edge doesnt work.....
You're problem is a little different. If you can't get into recovery mode, than that means you aren't in recovery mode, which means you can use ADB to enter download mode and use Odin to flash your phone. I have given up looking for a solution, and have sent my phone back to AT&T for a replacement. Since I'm still in my thirty day trial period, it doesn't matter if I used different firmware or not. Hopefully others won't get into the situation I had. For me, this thread is complete.
brandon9721 said:
same here i put froyo from the galaxy s i9000 and i cant change the rom or get into recoverymode because buttons dont work man this sucks and 3G or Edge doesnt work.....
Click to expand...
Click to collapse
hi,
I solved the same problem doing this:
start odin.
take out battery. plug in USB. press both volume buttons. insert battery while pressing those buttons.
Done. download mode should appear.
yep, same boat
I am in the same position here. I downloaded the froyo leak and installed it with odin, no problem there. Upon startup into froyo, all was good, except my phone was stuck in horizontal mode until I tilted it vertical, *then* it would go horizontal. So basically I am 90 degrees off kilter. I decided to look around for another rom to try, and in the process managed to get stuck in recovery mode. Couldn't tell ya what firmware I have, just what is on the endless recovery screen that I cannot get out of!
I have no external microSD card, only the SIM card, and no way to get it recognized on my XP or win 7 system.
Really, really stuck here, guys. I do have the androidsdk installed, if there is a way to get it to reboot. As it is, adb cannot see the device, so I am looking at a truly bricked phone.
And yes, this is a US phone, which is why the power button and home button are not mapped (I assume).
I am DESPERATE for some help here!
and while I am at it...
I WAS able to get into download mode with the shovel guy originally by using the 2 volume keys+power, usb (odin up), battery in, release power.
No more. No key combo works.
Totally bricked the Samsung, which is supposed to be impossible!
pkrouse said:
I WAS able to get into download mode with the shovel guy originally by using the 2 volume keys+power, usb (odin up), battery in, release power.
No more. No key combo works.
Totally bricked the Samsung, which is supposed to be impossible!
Click to expand...
Click to collapse
when you are on the i9000 rom the only button that will get you in download mode is the vol down
That's HUGE!
You, sir, are a gentleman, scholar, and all-round smart guy! How did I miss that? I coulda SWORN I was getting into download mode with both volume keys. I've never been so happy to see a little Dalek dude with a shovel in my LIFE. 2 minutes in the one-click installer and now I'm back in business!
Thanks for helping a terrified owner out, and preventing a trip to the AT&T store.
I cannot go to download mode
I have the same problem here. Stuck in the recovery mode after upgrade the froyo and had the orientation problem. How do you go into download mode or power reset or unknown upload mode? Any button combination doesnt seem to work for me.
How do I do?
Please HELP. I am struggling here
Thanks
xaga150 said:
I have the same problem here. Stuck in the recovery mode after upgrade the froyo and had the orientation problem. How do you go into download mode or power reset or unknown upload mode? Any button combination doesnt seem to work for me.
How do I do?
Please HELP. I am struggling here
Thanks
Click to expand...
Click to collapse
the key to the i9000 rom/kernel button combo is VOL DOWN + using the USB trick. do not press vol up + down, just the down while you are plugging in the usb cable
i too am stuck in recovery mode. the only way i can get into download mode is by using both volume buttons. just holding the down button just sends me to revoery mode as well. how can i fix my phone in download mode?
nevermind, reinstalled 2.2 and it works now.
Eureka I got it...I think
I installed froyo 2.2 i9000 on my captivate and got stuck in recovery mode...power button doesnt select and when I hold down the up and down vol buttons I couldnt get the downloading icon anymore either. Then I remembered something from another post....
Home + Vol Down + Power = Downloading Icon
It worked for me....let me know if this helped....I'm officially unbricked.
Hey. I'm in the same boat. My Captivate has I9000 firmware running it and it won't run properly. I can't access the settings to enable USB debugging in order to boot in either Recovery or Download using adb and no button combination works for me. I can't use button combos to boot into either Recovery or Download mode.
Does anybody have any idea what is going on and how to fix this?
JPBetley said:
Hey. I'm in the same boat. My Captivate has I9000 firmware running it and it won't run properly. I can't access the settings to enable USB debugging in order to boot in either Recovery or Download using adb and no button combination works for me. I can't use button combos to boot into either Recovery or Download mode.
Does anybody have any idea what is going on and how to fix this?
Click to expand...
Click to collapse
JPBentley-- Since the I9000 firmware is set to use physical buttons, and the Captivate doesn't contain any, once you get into recovery mode, you cannot get out. The standard Captivate key combinations to get into download mode do not work, as do the combinations to get into download mode via the I9000 firmware. Basically, you get to a dead end. Unless there is some way to flash the phone's ROM outside of download mode, which I doubt, your best bet is to return the phone for a replacement. After haggling around with AT&T for a while, they admitted that installing the I9000 ROM doesn't invalidate your warranty, so they should take it back. They did with mine, and now I'm running the official Froyo leak. Good luck with your new phone!
SOLUTION
For all those that are having this problem, Ive struggled with it & tried EVERY possible button combination & nothing worked.
The ONLY solutions I have found is to use a usb JIG. Take out the battery, sim card & sd card, plug in the Usb JIG & put the batter back in. Give it a couple of seconds & I'tll enter recovery mode without pushing any buttons. You dont even need to push the power button, it's that simple.
Here is an image of how to make one if you are electronically inclined, personally I am not so I found a local electronic parts store & they put on together for me.
1.bp.blogspot.com/_3KjgtwnRiWM/TNTyjkZGquI/AAAAAAAABL4/7NSmqrYmkmU/s640/i900.jpg
If you want, you can also buy one online, I cant post a link becuase Im a new member but just search for "samsung usb jig" on ebay.com & youll find plenty.
shop.ebay.com/?_from=R40&_trksid=p5197.m570.l1313&_nkw=samsung+usb+jig&_sacat=See-All-Categories
yes, i think you need to build a jig or buy one online if you want to play with custom rom. you may not need it now, but you may need it just in case.
http://cgi.ebay.com/ws/eBayISAPI.dl...47234&ssPageName=STRK:MESELX:IT#ht_511wt_1139
agustinpac said:
hi,
I solved the same problem doing this:
start odin.
take out battery. plug in USB. press both volume buttons. insert battery while pressing those buttons.
Done. download mode should appear.
Click to expand...
Click to collapse
OMG you saved my life
thx so much for your post
I have the same problem, i can get into recovery mode. I can also get to download mode but Odin doesnt see my phone and neither does adb. By pulling the battery with no buttons pushed it goes straight into recovery mode. Looks like I have a brick now. If anybody has any suggestions please let me know.
drowe24 said:
I have the same problem, i can get into recovery mode. I can also get to download mode but Odin doesnt see my phone and neither does adb. By pulling the battery with no buttons pushed it goes straight into recovery mode. Looks like I have a brick now. If anybody has any suggestions please let me know.
Click to expand...
Click to collapse
That's not even close to a brick. Are you using a usb port closest to the motherboard on your pc? Is your cable good? Make or buy a jig, that will put your phone into download mode.
Sent from my blazing fast Captivate running Continuum GB ROM using Tapatalk Pro

[Q] galaxy s gt-i9000 frozen

i every one my galaxy just freeze when i turn it on the screen just stay in galaxy s gt--i9000 samsung. tried to get it in download mode but won´t enter .recovery mode i do aply update and the sreen turns white . then backs on reboot mode! can anybody help me?
ps: sorry my english .
What I found works is taking the battery out and then Pressing the Volume Down button + the Power Button + the Home button and entering Download Mode and you need to have odin to restore the phone. Google restore Samsung Galaxy S.
iv tried to get download mode doesnt work!
irmaiden said:
i every one my galaxy just freeze when i turn it on the screen just stay in galaxy s gt--i9000 samsung. tried to get it in download mode but won´t enter .recovery mode i do aply update and the sreen turns white . then backs on reboot mode! can anybody help me?
ps: sorry my english .
Click to expand...
Click to collapse
Hi , can you give a little more information....were you flashing a new rom? and i think you say that you can get into recovery but not download is that correct?
yes i can put in recovery, but every action i do it puts the screen white, and goes back into recovery mode!
Ok , in your first post you say you apply update in recovery...if it is a new rom you are installing you need to select - install zip option ,then scroll to the zip file you downloaded to the phone .
Sent from my GT-I9000 using xda premium
i do instal.zip and the phone sreen turns white,then back into recovery mode sreen
It sounds like you will have to purchase (or make) a usb jig to force your phone into download mode they are only £3 on ebay , something must have gone wrong with cwm..once you have the jig you will be able to install a stock samsung rom to save your phone.....Or you could install google sdk on your computer and see if you can abd into the phone.

[Q] can i flash without download mode?

Hi there,
Just out of curiosity, what will happen if I connect my Ace (switched on) to the computer, load the files in the Odin and press start.
Can I flash the phone without getting into the download mode?
litstbl said:
Hi there,
Just out of curiosity, what will happen if I connect my Ace (switched on) to the computer, load the files in the Odin and press start.
Can I flash the phone without getting into the download mode?
Click to expand...
Click to collapse
You can try yourself and lets see what will happen.
MicroLizard said:
You can try yourself and lets see what will happen.
Click to expand...
Click to collapse
Maybe someone has already tried
I have a phone, which I can not get into the download mode. So that's why I wonder what will happen if I flash without getting into the download mode.
The ROM will not be flashed that is all
sax0406 said:
The ROM will not be flashed that is all
Click to expand...
Click to collapse
So that means if I have the correct rom files in Odin, either the phone will be flashed (if I have the download mode), or nothing will happen (if I don't have the download mode). Right?
Because when I press the button combination for the download mode. I didn't have any display on the screen. However, the phone can still be recognized by the computer and Odin.
It will work as long as the phone isn't on an os and the problem is the phone is gonna boot and then there might be problems as the os u are running will crash...If u are stuck at ace logo it might work
U know that tut that u pull the bat and press home+volume+power and insert the battery and nothing happens on the screen (Hardbricked ace) it's the same
But.....
DON'T TRY IF U DON'T NEED TO!!!OTHERWIZE U WILL ENDUP LIKE ME!
1.) nothing could happen
2.) could be flashed (very unlikely i would say)
3.) you get a very nice paperweight
I had the same Problem with the stock recovery. cant understand why (i already reached it months ago)...could be due to the wind direction
but seriously...why do you want to risk it? just do it like the "manual" says or, cuz you cant go in dlmode, leav it.
maybe I better leave it as it is. The system now is quite ok.
Thanks guys!
Most Likey no effect on the flash
But you could give it a shot
Go to download mode usin adb wen phone is on..
Adb shell
$ reboot download
Sent from my GT-S5830 using Tapatalk 2
shreyasvb said:
Go to download mode usin adb wen phone is on..
Adb shell
$ reboot download
Sent from my GT-S5830 using Tapatalk 2
Click to expand...
Click to collapse
You ever tried that command reboot download yourself ?
This was sent from a Galaxy Ace. Problem?
shreyasvb said:
Go to download mode usin adb wen phone is on..
Adb shell
$ reboot download
Sent from my GT-S5830 using Tapatalk 2
Click to expand...
Click to collapse
I tried
adb reboot bootloader and
adb reboot download
nothing works, the phone just restart normally
litstbl said:
I tried
adb reboot bootloader and
adb reboot download
nothing works, the phone just restart normally
Click to expand...
Click to collapse
Reboot download would never work , for Download Mode can only be accessed using key combinations
This was sent from a Galaxy Ace. Problem?
If you are not going to download mod, your phone is not ready to flash a new OS. If you have any trouble with flashing see this Bro,
youtube.com/watch?v=fe2s29e9s18
stucks on samsung logo
hi
dear I have Samsung galaxy s duos 2 gt-s7582 I faced some problem in my phone
1 ..... during its software update it failed to update and some times it showed android robot with red exclamation marks what I did I put my battery out of set and put it back again after some time it worked fine although it showed me android version is 4.2.2
2..... one day I kept its battery off and then I charged it after it stucks on Samsung logo for a unlimited time I went to shop to show its error the shopkeeper said its firmware is no more working I thought why not I to do its firmware after that from sammomobile I download its firmware
3....... when I press vol down + power and home button at the same time it shows the android robot with red exclamation mark it is unable to enter into odin mode
4...... when I press vol up+ home and power button then it shows me the options like factory mode like full test . item test . test report . clear Emmc and reboot
I said earlier that before this it is unable to do update and many time it showed me
---------- Post added at 09:59 PM ---------- Previous post was at 09:17 PM ----------
hi
dear I have Samsung galaxy s duos 2 gt-s7582 I faced some problem in my phone
1 ..... during its software update it failed to update and some times it showed android robot with red exclamation marks what I did I put my battery out of set and put it back again after some time it worked fine although it showed me android version is 4.2.2
2..... one day I kept its battery off and then I charged it after it stucks on Samsung logo for a unlimited time I went to shop to show its error the shopkeeper said its firmware is no more working I thought why not I to do its firmware after that from sammomobile I download its firmware
3....... when I press vol down + power and home button at the same time it shows the android robot with red exclamation mark it is unable to enter into odin mode
4...... when I press vol up+ home and power button then it shows me the options like factory mode like full test . item test . test report . clear Emmc and reboot
I said earlier that before this it is unable to do update and many time it showed me

[Q] Softbricked my phone... need help!

Hi,
So I try to flash my phone with Odin, but it seems I made a mistake. It's a long story... When I go back to stock rom from custom, I use Odin and my phone goes to a bootloop. Then I try to reflash stock rom with Odin again and I have the same problem every time. I like to clear cache/user but when my phone goes to recovery mode I can't navigate with hardware buttons (not hardware issue) just the power button works so I can't do nothing here. Ok here start a strange part (for me) bc. download mode it's not accessible with key combination just from command line and when I get download mode I try to flash twrp recovey with Odin but the result is sofbrick. My phone not recognized by Odin and adb commands not working anymore. I can't access recovery or download mode. My phone stay on logo and nothing happen.
Thank You for any solution!
P
djbalogi said:
Hi,
So I try to flash my phone with Odin, but it seems I made a mistake. It's a long story... When I go back to stock rom from custom, I use Odin and my phone goes to a bootloop. Then I try to reflash stock rom with Odin again and I have the same problem every time. I like to clear cache/user but when my phone goes to recovery mode I can't navigate with hardware buttons (not hardware issue) just the power button works so I can't do nothing here. Ok here start a strange part (for me) bc. download mode it's not accessible with key combination just from command line and when I get download mode I try to flash twrp recovey with Odin but the result is sofbrick. My phone not recognized by Odin and adb commands not working anymore. I can't access recovery or download mode. My phone stay on logo and nothing happen.
Thank You for any solution!
P
Click to expand...
Click to collapse
Hi to all...
i've got the same problem...
any idea???
thanks in advance...
Edy

Categories

Resources