In stock rom(2.3.4) I can use hdmi. But in cm9 hdmi doesn`t work.
Sent from my DROID3 using xda app-developers app
HerbK said:
In stock rom(2.3.4) I can use hdmi. But in cm9 hdmi doesn`t work.
Sent from my DROID3 using xda app-developers app
Click to expand...
Click to collapse
It never did get working I don't think. Part of the reason was because ducati (the hardware codec engine TI made) was closed off to all our development and only worked on GB 512MB RAM devices or ICS 1GB RAM devices but not ICS 512MB devices. Recently Hash got a 512MB binary for ducati and with kexec work on hwcodecs has been almost completed (but nothing else hardly works yet). Once the Kexec ROM gets stable we should have everything!
Give hash and jonpry a little time to get the kinks worked out in the new kexec build.
Sent from my XT862 using xda app-developers app
CM9 is still in alpha, as with CM7 and any other aosp-based rom
we will see a complete rom pretty soon, as kexec is now working
Related
This is our team's Thrill kernel based on the official froyo kernel source, 2.6.35.7. I'll upload builds at least once a week from our source. If you're interested in following progress go to https://github.com/twagler/LG_Waggle_Kernel
DOWNLOADS:
STOCK:
Verison 0.1:
---------------------------------------------------------------------
FEATURES
CHANGELOGS
STOCK - STOCK LG KERNEL - http://www.multiupload.com/3RK16UM6P2
0.1 Initial compilation(11-20-11)
DIRECTIONS
Uh.... flash the zip in clockworkmod. You may need to wipe Dalvik cache.
CONTRIBUTORS:
tylerwagler
CallMeAria
bedwa
Urabewe
what will change with your kernel?
For now, just optimizations that come with upgrading kernels. I believe the Droid 3 and Droid Bionic use the same CPU as this phone, so I'll be monitoring patches coming from that community as they'll have more devs.
the link to the kernel download has been removed
the processor is a 1000 mHz texas instruments dual core processor, arm7 i believe
It's the OMAP 4430.
tylerwagler said:
For now, just optimizations that come with upgrading kernels. I believe the Droid 3 and Droid Bionic use the same CPU as this phone, so I'll be monitoring patches coming from that community as they'll have more devs.
Click to expand...
Click to collapse
Yea its the same.
Sent from my LG-P925 using Tapatalk
whatever hapened to this kernel?
It got pulled because the chipset's were different or something to that effect.
Sent from my LG-P925 using xda premium
Not true. OP updated. I need feedback!!!
to go back to a previous post in this thread, what have you done to this kernel to vary it from stock?
at the moment, not much. I have finally cleaned up LG's source to the point where it will actually build. If this build works as intended with no bugs/errors, I will move forward with patching it up to a newer kernel. there have been a crazy number of optimizations for omap processors in recent kernels.
Its not flashing. It aborts during install.
Sent from my LG-P925 using XDA App
taytay209 said:
Its not flashing. It aborts during install.
Sent from my LG-P925 using XDA App
Click to expand...
Click to collapse
mine as well
Sent from my LG-P925 using xda premium
working on a way to pack this for updating. apparently koush's anykernel updater doesn't work for this device. my bad
have you modified the script to flash it straight to the partition instead of to "boot?"
Could you add ADB root to it? Please?
Any specific reason for not using the CM7 cosmo kernel?
Yes.. kernels must match up with lib etc and bin files to work and the cm7 files are not easily swapped into LG rom
Sent from my LG-P925 using XDA App
Also because the kernel on cyanogens github doesn't compile.
Sent from my ADR6400L using xda premium
Woah rdanner you come to join the thrill devs? If so welcome we need devs here big time you did great work with the x10
Sent from my LG-P925 using xda premium
Well some hours ago Google released jb into aosp tree..
Matter of hours to get a rom for our phone from our talented devs..
Sent from my GT-N7000 using xda premium
And we are still waiting for ics
Sent from my LG-P990 using xda app-developers app
CM10 is officially launched, see Google+ CM circle.
Great News. A few doubts though
Lets consider LG releases the ICS update..
I noticed that google released new binary hardware drivers for galaxy nexus and nexus 7.
Does that mean the ICS drivers are not sufficient to run JellyBean???????
We will see...
Sent from my LG-P990 using xda app-developers app
I prefer the excellent custom roms here - so who needs LG (except their needed drivers).
Let's see, who's the first JB-Dev here... :laugh::laugh::laugh:
a big thanks to everyone already who is going to work on custom roms for our beloved device!
shajumohamed said:
Great News. A few doubts though
Lets consider LG releases the ICS update..
I noticed that google released new binary hardware drivers for galaxy nexus and nexus 7.
Does that mean the ICS drivers are not sufficient to run JellyBean???????
Click to expand...
Click to collapse
nah cyanogenmod already stated that any device supported by cm9 its able to run and will get cm10 aka jbean
Sent from my GT-P7500 using xda premium
but since we are not officially supported we'll have to wait and see what time brings us
crazy_dj said:
but since we are not officially supported we'll have to wait and see what time brings us
Click to expand...
Click to collapse
We are officially supported
Sent from my GT-N7000 using xda premium
msedek said:
We are officially supported
Sent from my GT-N7000 using xda premium
Click to expand...
Click to collapse
I don't want to complain but crazy dj is right. If we were officially supported we would get official nightlies.
Sent from my LG-P990 using Tapatalk 2 Beta-6
ironman159 said:
I don't want to complain but crazy dj is right. If we were officially supported we would get official nightlies.
Click to expand...
Click to collapse
We're something in between.
Other devices who are not officially supported need to port CM on their ROMs - we don't because RC from the CM-Team did that for us - and submits fixes for our device as well.
The reason we don't have nightlies is that CM doesn't add devices which aren't fully running ICS - which we don't.
but he only submits fixes for CM7 doesn't he?
Without the drivers we need a cyanogen release is just pointless we are stuck with gingerbread till lg release the official ics and maybe with an official ics rom a cyanogen jb rom can come from that.
I would be interesting to see if the Hardware Acceleration works with Jelly Bean if we have the official LG ICS Sources... Hope it works. ;-)
tonyp said:
We're something in between.
Other devices who are not officially supported need to port CM on their ROMs - we don't because RC from the CM-Team did that for us - and submits fixes for our device as well.
The reason we don't have nightlies is that CM doesn't add devices which aren't fully running ICS - which we don't.
Click to expand...
Click to collapse
This is not accurate.. I have a gtab 10.1 running Cm9 nightlies and the tab does not have offial ics yet, same situation... But our dev/maintainer there is pershoot and he care about us... And release nightlies pretty often... Guess RC its just not interested in this phone anymore
Sent from my GT-N7000 using xda premium
that's not right since the Honeycomb drivers were ported and already there, in our situation we only have drivers from Froyo poorly ported by LG to Gingerbread. The leap between GB and ICS is way bigger that HC and ICS. Remember that without his work our phone would be not as good as it is with CM9. Also he still has a private life and if he takes a break , fine so be it. He doesn't owe anyone of us anything.
I'm sorry but I just couldn't let it be
Here is a kernel build for the Samsung Galaxy Note 10.1.
Running on 1704Mhz. With extra 100, 50 and 25Mhz step. So it runs 25 to 1704 instead of 200 to 1400.
Custom bootanimation support. (Standard bootanimation wont work)
Triangle away support.
Update N8000BRV2 (ICS)
-better voltage settings
-better wifi drivers
-BFQ scheduler back
-updated linux version
-other minor tweaks
Update N8000Jelly_OC
-Build for JellyBean
edit.
N8013 and N8010 support pulled back because of the wifi problems
source https://github.com/brieuwers/N8000Kernel
Thanks to Gokhanmoral, Espenfjo, Entropy512 and Franciscofranco.
Flash tar with odin or zip with CWM.
Everything at your own risk.
Greetz Bas.
anyone test it on an n8013 yet?
n8013 support?
I am also curious to see if this works on the US version (N8013). Anyone willing to give it a shot?
Has anyone tested this yet?
Lol all these views and no one?
Sent from my GT-N8013 using Tapatalk 2
I use this Kernel on my German N8000, no Problems so far.
LayZeeDK said:
Has anyone tested this yet?
Click to expand...
Click to collapse
I'm using. nothing much different so far.
Sent from my GT-N8000 using Tapatalk 2
Thanks for the replies, but im asking if this works for the N8013 model, NOT the N8000 model...
Sent from my GT-N8013 using xda premium
XDA told me that I need to put my source code online to confirm with the gpl license.
So right now Im busy finding out how to work with github after that I will build a N8013 kernel.
Sent from my GT-N8000 using XDA Premium HD app
Check my sig for some git tips... which reminds me, Pulser asked me to write up a more detailed guide with more tips (such as how to handle branching and how to handle source releases for test kernels).
Once you've gotten familiar with git, github is as easy as "git push origin". Long-term, good git discipline will greatly improve your development workflow.
Not to seem greedy but is 1.6 the most we can squeeze out of this thing?
Sent from my GT-N8013 using Tapatalk 2
LayZeeDK said:
Has anyone tested this yet?
Click to expand...
Click to collapse
Tested and its been 2days, working great,......fast
jamesheryanto said:
Tested and its been 2days, working great,......fast
Click to expand...
Click to collapse
For 8013?
Sent from my GT-N8013 using Tapatalk 2
mitchellvii said:
Not to seem greedy but is 1.6 the most we can squeeze out of this thing?
Sent from my GT-N8013 using Tapatalk 2
Click to expand...
Click to collapse
No this is just a start in fact 1600 isnt a real OC. The settings are already in the kernel made by Samsung they just locked it at 1400.
Sent from my GT-N8000 using XDA Premium HD app
will this work on n8010, nobody seems to be working on the N8010 devise. cant wait for jellybean on my note :silly:
Issue with 5GHz Wifi
After applying this Kernel I was unable to connect to any of my 5GHz WiFi networks. Upon reverting to stock Kernel, the problem resolved.
Kernel seemed stable in all other aspects.
Running Stock XXALI1 (Rooted)
Thanks
OK - I took the plunge and tried this on a N8013. Only issue I have found is, as mentioned by MintyTrebor, with wifi. Both my 2.4 and 5Ghz work (as well as tether to the phone), but will occasionally disconnect - all I have to do to get it back is turn wifi on/off and things are good. Running at 1.6 on all cores (system tuner), very snappy (nova launcher). Benchmark tests really bumped up with this kernel. No problems with pen apps. Had one freeze, but that was after I'd installed twrp recovery.
Think I'll leave this kernel on for another day and see how the battery life is. Be great if someone could crank one of these out specifically for the N8013 to get rid of the wifi issue.
Thanks for testing kernel. Im gonna build kernel for 8013 and 8010 within 24 hours.
Sent from my GT-N8000 using XDA Premium HD app
tried my gt-n8010 and works ok upto now. not noticed anything with wireless, but theres still time lol
Thanks for the 8013 support. I'll wait for a braver soul to try it first
Do you notice improved performance at 1600? Quadrant?
Sent from my GT-N8013 using Tapatalk 2
So i saw this thread on the droid incredible 2 forum and saw this: http://forum.xda-developers.com/showthread.php?t=1934288,
it says that everything is working so maybe a port?
DKStunna108 said:
[
DONT WORK: DATA FOR GSM BUT SMS WORKS AND CALLING.. IN THE PROCESS OF GETTING DATA WORKING FOR GSM BE PATIENT!!
Click to expand...
Click to collapse
As far as I can see this means something...
We already have 3 JB ROMs. What we need is a 3.x kernel
Sent from my Incredible S using xda app-developers app
How come their ROM is running with 2.6.35 kernel? How come their camera is working with the same kernel?
Sent from my HTC Incredible S using xda app-developers app
@di said:
How come their ROM is running with 2.6.35 kernel? How come their camera is working with the same kernel?
Sent from my HTC Incredible S using xda app-developers app
Click to expand...
Click to collapse
Afaik you can get camera to run on our current too that should not be a problem. It is just missing some modules for front camera.
So not really an issue.
Also I say the same why port more roms we already have a couple ported roms and why would you want more? It will +- the same bugs on the ported one as it is on current. We need an AOSP 3.x kernel to fix most of the bugs.
I've been looking around for p970's kernels and it seems there really isn't much. Let's say if I flash a kernel specific for another device, say SiyahKernel for S2 onto my p970, will it work out?
It's different specification, you can't install other kernel to P970, or you'll only got hard bricked..
That makes me think of a question... If kernels got the same arch, commits can be injected or is it more complicated than injecting commits and managing dependencies?
And adapting some data like ram size...
Sent from my LG-P970 using xda premium
RR kernel is an alternative . But chaux please wait for ics sources . Now our community is in the phase of freeze after ics sources is out devs will get diging
Sent from my LG-P970 using xda app-developers app