I have a Galaxy i9000 that when the the battery is taken out and replaced
then turned on it enters "Downloading" mode ..
Using Odin I can ( and have ) installed a local ( Australian ) rom / pit / bootloader. / moden.
installed custom roms and all is well. I can turn the phone off and back on- Tried everything I can think of.
But pull the battery and welcome the "Downloading screen"
Any Ideas ?
Regards
Darryn
You flashed a new ROM with new bootloader an always the same
bizarre eroor? Wouw ...
I think, your SGS is defective ...
Related
Dear all,
Hope this is the right location and if not please move... thanks!
A brief history on my problem: I had a Canadian Bell ( SGS Vibrant ) I9000M and recently rooted and unlocked for an oversea trip. It was on the stock Gingerbread from Bell and everything works fine and after I'm back in the middle of the day the phone starts rebooting to the 'S' animation ( bootloop? ). Then, I tried to reflash it with other stock roms but no luck.
Then, during one flash my USB port failed on me and bricked. I decided to flash with primary and secondary bootloader and the phone no longer to display anything after power on.
After following AdamOutler's thread on the hardware unbrickable mod now can go back to Download Mode. I was so glad to see things back so I immediately flash it with Heimdall one-click ( with XXJVT rom ). However, everything went smooth, except when everything ( incl primary and secondary bootloaders ) are loaded it still doesn't turn on. I tried many times with same result.
Anyone can shed some light on this? Thanks!!!!!
today i flash my Samsung note n7000
No cwm , only two screens
Normaly start , Firmware upgrade encountered an issue. /push on/
red text : low battery!! can not download /push on+wolume down+central button/
i wanted to try flash phone with odin PC. How can i charge baterry ?Normal phone was in charger 2 hours , but text low battery can not download.
i need new full battery?
sorry for my english , i am from SLovakia.
thanks
DavidkoKE said:
today i flash my Samsung note n7000
No cwm , only two screens
Normaly start , Firmware upgrade encountered an issue. /push on/
red text : low battery!! can not download /push on+wolume down+central button/
i wanted to try flash phone with odin PC. How can i charge baterry ?Normal phone was in charger 2 hours , but text low battery can not download.
i need new full battery?
sorry for my english , i am from SLovakia.
thanks
Click to expand...
Click to collapse
if your phone can't charge your battery you should consider buying an external charger and then recharge the battery so you can flash new ROM!
how did this happen, were you on gingerbread or ICS ROM? did you wipe or flash something in recovery?
i have it official ics rom for germany, i want try it flash other rom / hybrid rom / after flash , and restart rom stay only first screen /booth screen/. i turn to cwm and clear wipe, factory reset...but after this operation note is restart back to cwm first screen. i try this operation 3 times, after this i turn note the download mode , connect with pc odin and flash new rom , but flash not ending only stay 15 minutes near 95 percent flash line. after restart ,i dont have cmw , only first screen is Firmware upgrade encountered an issue and if i turn to download mode , write me low battery!! can not download.
first i need full battery , and after i can try it flash...
Bump!
I dont usually bump topics but a friend of mine is having this same issue,
i cant boot into recovery or cwm mode, and if i try to hold the power,volume down and menu button together, it tells me that the battery is low (which isnt true as its been plugged since 3 hours). Its not a battery issue, my friend did some bad flashing and being a noob that he is, he can't even tell me what he was doing exactly that caused this weird thing, i donno even if i should call this a brick or not :S anyone????
Can you get another battery from anywhere?
Sent from my GT-N7000 using xda premium
PROBLEM SOLVED
THANKS TO Dr.KETAN because of him this problem for me has been solved
Below is the step-wise description.
WHAT HAPPENED:-
01.) I was on ROOTED GT-N7000 ICS 4.0.4 PDA-DDLRB CSC(K)-ODDLR4 M-DDLR1
02.) I decided to install Alliance ROM => AllianceROM_JB_N7000XXLSZ-v3 and by mistake and just out of habit instead of using ROM Customizer, I used Mobile ODIN with WIPE (ALL of them) Selected.
03.) Although ODIN didn't came up with any errors and showed installation successful, my phone was stuck on the first screen "SAMSUNG GALAXY NOTE GT-7000" screen.
04.) After waiting for about 30-40 mins. I took out battery, took out memory card and tried to reboot again but no luck.
05.) I tired to recover by re-installing/rolling back to ROM I was on i.e. GT-N7000 ICS 4.0.4 PDA-DDLRB CSC(K)-ODDLR4 M-DDLR1, but ODIN Shows an error saying "PARAMETER INCORRECT" (screen shot attached)
06.) I then tried to install
GT-N7000 ICS 4.0.4 PDA-DDLR9 CSC(K)-ODDLR3 M-DDLR1 but ODIN failed (Screen Shot Attached)
GT-N7000 GB 2.3.6 PDA-DDLB2 CSC(K)-DDLA1 M-
07.) Now my phone is stuck in two modes only i.e.
7.1.) "Firmware upgrade encountered an issue. Please select recovery mode in Kies and try again"
7.2.) Download MODE
Dr. KETAN"S HELP (WHAT NEEDS TO BE DONE)
01.) Remove .MD5 from extension of ROM and keeping .TAR as extension help me got rid of the "THE PARAMETER IS INCORRECT" error.
02.) Go to Task Manager and close/disable/end process following service
02.1) KIES
02.2)FIREWALL
02.3)ANTI-VIRUS
03.) In ODIN (on PC) Select PDA do not select PHONE (this was my mistake too)
04.) In case you had/have HEIMDALL on your system , go to Device Manager (from Control Panel) and un-install the Generic Device driver
05.) Now try to install the stock ROM you have (it should get installed , at-least this happened in my case.)
WHAT IS TOTALLY USELESS ?
01.) KIES
02.) You PANICKING and FREAKING OUT
WHAT I CAN'T DO:-
01.)Visiting Samsung shop/service station
Please find the attached link to the screen shot. https://plus.google.com/photos/11509...978?banner=pwa
THANKS TO Dr. KETAN again for his HIGHLY appreiciated, respected and well needed help and guidance.
I tried that above, but still doesn't work for me.
low battery can't download
i have the same problem
i was in stock rom and i was playing game! the phone downloaded the OTA update and restarted automatically to install it but it stuck a long time in samsung boot logo and i think it caused the battery drain.
i rebooted the phone and it showed me "firmware upgrade encountered an issue blah blah blah" but my phone reboots after a sec and shows the message again and reboots again and .....
i tried to get into download mode but it says "low battery can't download " and reboots! i charged my battery with external charger and still no change! ODIN can detect my phone when i connect it but because it reboots after a sec i can't do anything!
any suggestions would be appreciated!
alirezakv said:
i have the same problem
i was in stock rom and i was playing game! the phone downloaded the OTA update and restarted automatically to install it but it stuck a long time in samsung boot logo and i think it caused the battery drain.
i rebooted the phone and it showed me "firmware upgrade encountered an issue blah blah blah" but my phone reboots after a sec and shows the message again and reboots again and .....
i tried to get into download mode but it says "low battery can't download " and reboots! i charged my battery with external charger and still no change! ODIN can detect my phone when i connect it but because it reboots after a sec i can't do anything!
any suggestions would be appreciated!
Click to expand...
Click to collapse
After you charged the battery, are you able to stay in download mode?
Help please , tried to take UK i9000 back to stock , in a boot loop
Okay , i guess i best start by saying what i have done and see if you guys can tell me where i went wrong
Okay i had a old custom rom on the phone , i've just bought a i9300 , so i thought hmmmm lets take it back to stock and then sell it ....great idea.
So i went to samfirmware.com download section
downloaded odin 1.82 with the pit files
downloaded
GT-I9000 I9000XXJW4 Android 2.3.6 2012 April I9000OXAJW5 United Kingdom / Ireland (i assume this is stock rom for uk phone with no branding.)
booted up odin , clicked on the pit file.512 (re-partition automatically clicked itself)
then loaded up the downloaded rom unpacked into pda
then clicked start , it took a few minutes , my phone rebooted
odin had worked its magic and the phone rebooted it went into a screen with blue text , a fair bit of orange text was showing
stating it could not do certain things , so i rebooted the phone and now it appears to be in a boot loop , just the animated S logo running and the phone rebooting.
The phone still goes into download mode .
Help please.
The text that came up in orange , was mainly about e partition and how it could'nt wipe things.
i have now downloaded 3.04 of odin and tried the same as my first post , but its done the same thing..just reloading with the glaxay s logo fading in and out .
previously it has been rooted and it had a old version of clockwork mod 3.xx on it..
not sure if this is causing any issues.
Okay , i got it working , followed this guide on the forum :-
http://forum.xda-developers.com/showthread.php?t=1583026
Hello, my name is Robert, its the first time when i have a real problem with my Samsung Galaxy S i9000. I`m not a noob, i have root and change many room`s on android phone but i have a real problem since yesterday. I change my old room ( 4.2.2, kernel semaphore ) with stock room 2.3.6( i put him with odin), okey, no problem. In this morning, my phone doesn`t start, because the battery decreased. Ok, i put him to charge but the screen show me the brick error, with the exclamation mark with phone and pc. No problem, i flash the 2.3.6 with, odin, and after i root the phone to put my old room. No problem, the phone instal the room, and after restart the phone doesn`t wont to boot. He intro in recovery mode with no combination of buttons, just power on. i reinstal the room. Nothing... When the telephone its off, and i put to charge him, its power on automaticali in recovery mode. I change the kernel, i put semaphore ( old and new version on kernel ) cyanogen, and now i put helly bean room. Nothing, the phone start, the i9000 image, after the cyanogen/ semapfore/ helly bean image and after start the recovery mode...
My problem is: its the first time with this tipe of problem, and the te stock room i can`t put him with Odin, i can`t root him, but no change the room ...
My second problem is: i`m not a noob, i try everything... It.s a problem with my phone? I dont understand... the room`s instal in recovery, finish more fast, and the problem is the phone say the room it is instal ! HELP ( sorry for my english, i`m from Est Europe. )
Hello everyone .
This morning I was working as normal on my Note n7000 with official stock rom JB 4.1.2 UAE , I was taking some photos , the battery was low , and then he just stopped working , I plug it into charger until 100 % then tried to start it but stays on the Samsung's logo !
I tried to pass the official rom again using odin but the same problem it stays on the Samsung's logo .
only download mode is working , recovery mode shows the green android logo and after that restart to the 1st situation again.
I felt tired and just removed the battery from the phone and let it like that ( did not mean to do that ) and after about 1 hour I turned on the phone and the problem was solved by itself ! But how ?
and what that means ? is that going to happen again ?
what should I do ?