Hello, my name is Robert, its the first time when i have a real problem with my Samsung Galaxy S i9000. I`m not a noob, i have root and change many room`s on android phone but i have a real problem since yesterday. I change my old room ( 4.2.2, kernel semaphore ) with stock room 2.3.6( i put him with odin), okey, no problem. In this morning, my phone doesn`t start, because the battery decreased. Ok, i put him to charge but the screen show me the brick error, with the exclamation mark with phone and pc. No problem, i flash the 2.3.6 with, odin, and after i root the phone to put my old room. No problem, the phone instal the room, and after restart the phone doesn`t wont to boot. He intro in recovery mode with no combination of buttons, just power on. i reinstal the room. Nothing... When the telephone its off, and i put to charge him, its power on automaticali in recovery mode. I change the kernel, i put semaphore ( old and new version on kernel ) cyanogen, and now i put helly bean room. Nothing, the phone start, the i9000 image, after the cyanogen/ semapfore/ helly bean image and after start the recovery mode...
My problem is: its the first time with this tipe of problem, and the te stock room i can`t put him with Odin, i can`t root him, but no change the room ...
My second problem is: i`m not a noob, i try everything... It.s a problem with my phone? I dont understand... the room`s instal in recovery, finish more fast, and the problem is the phone say the room it is instal ! HELP ( sorry for my english, i`m from Est Europe. )
Related
Hi
Please help, im a total newb and i have problem with my Darky 10.2!
First i had Darky 8.2, used odin, and did all that was asked. Worked fine, even donated to darky that time
then upgraded it to 9.5, but after a 6months started lagging bad... then i decided to put 10.2, and it fixed the lagging and the cellphone got tons faster. But it crashes like crazy:/ No matter, i wanted to put back 9.5, but i cant get into recovery mode!!!!
When my i9000 boots up it gives a lot of screen jumble before the computor voice od darky rom, it gives some jumble after...and sometimes when i open gallery... it crashes a lot on diferent things:/
I have JVQ, it seems important, but i dont even know what that means.
Please help!
Thnx for your time
Try 3 button or get a jig to get in download mode and then flash anyother rom
Sent from my GT-I9000 using XDA App
it dosent want to go into recovery or download mode... thats the problem!
it just freezes when i try the three buttons or via darky configurator
Have you tried with adb?
germaligni said:
Hi
Please help, im a total newb and i have problem with my Darky 10.2!
First i had Darky 8.2, used odin, and did all that was asked. Worked fine, even donated to darky that time
then upgraded it to 9.5, but after a 6months started lagging bad... then i decided to put 10.2, and it fixed the lagging and the cellphone got tons faster. But it crashes like crazy:/ No matter, i wanted to put back 9.5, but i cant get into recovery mode!!!!
When my i9000 boots up it gives a lot of screen jumble before the computor voice od darky rom, it gives some jumble after...and sometimes when i open gallery... it crashes a lot on diferent things:/
I have JVQ, it seems important, but i dont even know what that means.
Please help!
Thnx for your time
Click to expand...
Click to collapse
Download and install DarkyOTA App or DarkyROMTool
Select wipe and install Darkys 10.2.2 using any of this Darky app.
Once you finish installation lets see what will happen..
i tryed that already!
got a restart and then black screen.... and needed to long hold lock button to restart again, and then booted normaly... no instalation happend.
its like recovery is blocked out!
how can i gat around it?
germaligni said:
i tryed that already!
got a restart and then black screen.... and needed to long hold lock button to restart again, and then booted normaly... no instalation happend.
its like recovery is blocked out!
how can i gat around it?
Click to expand...
Click to collapse
try using ADB and force with that to get download mode, or just make usb jig...
for optional option firstly change your included kernel on that rom ...
What is ADB?
I can get into Download mode, but i can go to recovery mode... i Instaled new roms from recovery, what can i do from download mode?
Thnx alot, im so newb and my phone is killing me
Had the same problem !
I flashed back to a stock GS rom, like 2.3.x and, root it, fixed permissions en whipe all date, everything thats whip-a-ble i whiped in recovery mode.
Then flash back Darky, that worked for me.
today i flash my Samsung note n7000
No cwm , only two screens
Normaly start , Firmware upgrade encountered an issue. /push on/
red text : low battery!! can not download /push on+wolume down+central button/
i wanted to try flash phone with odin PC. How can i charge baterry ?Normal phone was in charger 2 hours , but text low battery can not download.
i need new full battery?
sorry for my english , i am from SLovakia.
thanks
DavidkoKE said:
today i flash my Samsung note n7000
No cwm , only two screens
Normaly start , Firmware upgrade encountered an issue. /push on/
red text : low battery!! can not download /push on+wolume down+central button/
i wanted to try flash phone with odin PC. How can i charge baterry ?Normal phone was in charger 2 hours , but text low battery can not download.
i need new full battery?
sorry for my english , i am from SLovakia.
thanks
Click to expand...
Click to collapse
if your phone can't charge your battery you should consider buying an external charger and then recharge the battery so you can flash new ROM!
how did this happen, were you on gingerbread or ICS ROM? did you wipe or flash something in recovery?
i have it official ics rom for germany, i want try it flash other rom / hybrid rom / after flash , and restart rom stay only first screen /booth screen/. i turn to cwm and clear wipe, factory reset...but after this operation note is restart back to cwm first screen. i try this operation 3 times, after this i turn note the download mode , connect with pc odin and flash new rom , but flash not ending only stay 15 minutes near 95 percent flash line. after restart ,i dont have cmw , only first screen is Firmware upgrade encountered an issue and if i turn to download mode , write me low battery!! can not download.
first i need full battery , and after i can try it flash...
Bump!
I dont usually bump topics but a friend of mine is having this same issue,
i cant boot into recovery or cwm mode, and if i try to hold the power,volume down and menu button together, it tells me that the battery is low (which isnt true as its been plugged since 3 hours). Its not a battery issue, my friend did some bad flashing and being a noob that he is, he can't even tell me what he was doing exactly that caused this weird thing, i donno even if i should call this a brick or not :S anyone????
Can you get another battery from anywhere?
Sent from my GT-N7000 using xda premium
PROBLEM SOLVED
THANKS TO Dr.KETAN because of him this problem for me has been solved
Below is the step-wise description.
WHAT HAPPENED:-
01.) I was on ROOTED GT-N7000 ICS 4.0.4 PDA-DDLRB CSC(K)-ODDLR4 M-DDLR1
02.) I decided to install Alliance ROM => AllianceROM_JB_N7000XXLSZ-v3 and by mistake and just out of habit instead of using ROM Customizer, I used Mobile ODIN with WIPE (ALL of them) Selected.
03.) Although ODIN didn't came up with any errors and showed installation successful, my phone was stuck on the first screen "SAMSUNG GALAXY NOTE GT-7000" screen.
04.) After waiting for about 30-40 mins. I took out battery, took out memory card and tried to reboot again but no luck.
05.) I tired to recover by re-installing/rolling back to ROM I was on i.e. GT-N7000 ICS 4.0.4 PDA-DDLRB CSC(K)-ODDLR4 M-DDLR1, but ODIN Shows an error saying "PARAMETER INCORRECT" (screen shot attached)
06.) I then tried to install
GT-N7000 ICS 4.0.4 PDA-DDLR9 CSC(K)-ODDLR3 M-DDLR1 but ODIN failed (Screen Shot Attached)
GT-N7000 GB 2.3.6 PDA-DDLB2 CSC(K)-DDLA1 M-
07.) Now my phone is stuck in two modes only i.e.
7.1.) "Firmware upgrade encountered an issue. Please select recovery mode in Kies and try again"
7.2.) Download MODE
Dr. KETAN"S HELP (WHAT NEEDS TO BE DONE)
01.) Remove .MD5 from extension of ROM and keeping .TAR as extension help me got rid of the "THE PARAMETER IS INCORRECT" error.
02.) Go to Task Manager and close/disable/end process following service
02.1) KIES
02.2)FIREWALL
02.3)ANTI-VIRUS
03.) In ODIN (on PC) Select PDA do not select PHONE (this was my mistake too)
04.) In case you had/have HEIMDALL on your system , go to Device Manager (from Control Panel) and un-install the Generic Device driver
05.) Now try to install the stock ROM you have (it should get installed , at-least this happened in my case.)
WHAT IS TOTALLY USELESS ?
01.) KIES
02.) You PANICKING and FREAKING OUT
WHAT I CAN'T DO:-
01.)Visiting Samsung shop/service station
Please find the attached link to the screen shot. https://plus.google.com/photos/11509...978?banner=pwa
THANKS TO Dr. KETAN again for his HIGHLY appreiciated, respected and well needed help and guidance.
I tried that above, but still doesn't work for me.
low battery can't download
i have the same problem
i was in stock rom and i was playing game! the phone downloaded the OTA update and restarted automatically to install it but it stuck a long time in samsung boot logo and i think it caused the battery drain.
i rebooted the phone and it showed me "firmware upgrade encountered an issue blah blah blah" but my phone reboots after a sec and shows the message again and reboots again and .....
i tried to get into download mode but it says "low battery can't download " and reboots! i charged my battery with external charger and still no change! ODIN can detect my phone when i connect it but because it reboots after a sec i can't do anything!
any suggestions would be appreciated!
alirezakv said:
i have the same problem
i was in stock rom and i was playing game! the phone downloaded the OTA update and restarted automatically to install it but it stuck a long time in samsung boot logo and i think it caused the battery drain.
i rebooted the phone and it showed me "firmware upgrade encountered an issue blah blah blah" but my phone reboots after a sec and shows the message again and reboots again and .....
i tried to get into download mode but it says "low battery can't download " and reboots! i charged my battery with external charger and still no change! ODIN can detect my phone when i connect it but because it reboots after a sec i can't do anything!
any suggestions would be appreciated!
Click to expand...
Click to collapse
After you charged the battery, are you able to stay in download mode?
Hello everyone , I recently bought a GT9001 also known as galaxy S plus , so here's my desperate problem ... today about 4 hours ago , that POS program Samsung Kies told me there's a new firmware available so I hit upgrade ... it got stuck at about 60% then after 1 hour and a half I unpluged the phone from the USB ... since then I can't get rid of Recovery Mode .... before all this the phone had Android gingerbread , was working perfectly I loved it .. and now I think it's bricked ... I'm not good at this , I've tried with odin .. but it gets stuck ... please someone kind enough , help me get it back to its default state ... i have no idea what I'm doing here ... and i'm kinda desperate i need the phone asap
gotta mention I was able to get it in download mode via the three buttons ... can someone tell me what i need in order to fix it?
If u can access download mode than its not bricked download a stock rom flash it.....
sent from my GT-I9000 using xda premium
this is where I get stuck
http ://img706[DOT]imageshack[DOT]us/img706/8782/30950752[DOT]jpeg , sorry for the lame link I can't post outgoing links yet.
i have no idea what odin version to use or which one works, what ROM to use , all those files are from different sources i dont tink that's right
dualzo said:
Hello everyone , I recently bought a GT9001 also known as galaxy S plus , so here's my desperate problem ... today about 4 hours ago , that POS program Samsung Kies told me there's a new firmware available so I hit upgrade ... it got stuck at about 60% then after 1 hour and a half I unpluged the phone from the USB ... since then I can't get rid of Recovery Mode .... before all this the phone had Android gingerbread , was working perfectly I loved it .. and now I think it's bricked ... I'm not good at this , I've tried with odin .. but it gets stuck ... please someone kind enough , help me get it back to its default state ... i have no idea what I'm doing here ... and i'm kinda desperate i need the phone asap
gotta mention I was able to get it in download mode via the three buttons ... can someone tell me what i need in order to fix it?
Click to expand...
Click to collapse
use Kies recovery procedure http://www.4shared.com/office/koYpRWc1/KIES_update_recovery.html
Flash a i9001 rom using odin
so I've been trying for 5 hours to fix my semi-bricked phone and I can't do anything .... I've tried with odin 4.43 and some stock ROM-s ... but it gets stuck ... god damn it what should I do , i have no warranty ... GSM service , do they know how to fix things like these? it seems complicated
http[dots]//img18[dot]imageshack.us/img18/6763/96005243[dot]jpg ---> i get stuck with odin here
L.E
So I finally managed to fix it with AiresVE.ops , MultiLoader Odin v.4.43 and an official ROM from sammobile , it took 8 minutes but I had to do it on my laptop. Thanks for everything guys.
Hi,
some time ago i got the same problem But don't worry it's easy to solve..
Just download this one:
http://forum.xda-developers.com/showthread.php?t=1694617
and download this one to get a stock rom:
http://forum.xda-developers.com/showthread.php?t=1032437
or i recommend the broodrom which is based on the valuepack an works just flawless on my i9001
http://forum.xda-developers.com/showthread.php?t=1696381
then copy both .zips to your external sd and then boot into recovery (press vol+ and power button.. wait 3-5sec and release.. when the android thing & a box appears press and hold the home button (the left touchbutton))
if you're now in the recovery mode, click on "install update via zip" or something like that..
then you navigate to your external sd where the 2 files are
then you install the teamwinrecovery (zip file) after that you shutdown your system (pull the battery^^)
then boot again into recovery and you will see a new recovery (it's the teamwinrecovery)
this can be controlled with your touchscreen
now you click again on "install update via zip" or something like that an navigate again to your external sd..
for that you should navigate on the tip level and open a folder called "emmc"
There you install the other zip (it's your rom) an wait until it's finished
it will reboot automatically
If you get stuck in a recovery loop you should flash the bootloader with odin.. (instructions are given in the teamwinrecovery thread)
Good Luck and sorry for my horrible English
You can send me a pm if you have questions
Hi , a friend gived to me his phone to install a custom ROM , i made that before with my SG sII , provlem is when i installed a CWM , DPI was changed (i guess i installed cwm from other phone ) and now all works fine but display is off , is working but is off , i can acces only Download mode , here , other problem "Usb not recognized" is plfrom phone cuz i tried with other usb , port or PC ! WHO can i reinstall firmware or solve this problem with usb or DPI ! PLEASE HELP ! In 1-2 days i need to give him phone back
I can't understand a thing what you wrote... Can you explain in detail, may be step by step what all you installed and how...
nokiamodeln91 said:
I can't understand a thing what you mean up there... Can you explain in detail, may be step by step what all you installed and how...
Click to expand...
Click to collapse
I was to my friend to install on his N7000 a custom ROM , i moved to sd card cm11 gaps and Philz recovery . My mistake was , i used Philz from my Galaxy S2 and when i installed the recovery , i think the DPI was changed , and now when i want to install cm11 or do a wipe , it shows " Galaxy Note GT-N7000 and them the screen is complete black or with withe lone on screen like was broken , now , all i can acces is Download mode , but i dont know what problems has the phone cause what i try is saing "USB not recognized "
P.S : when i turn on phone normaly after logon boot , screen turns off but sound said to me cause is working , logon sound or when i recive a call or sms , but screen remains off
SORRY MY BAD ENGLISH but i am very disperate right now to write corectly ...
Edit : i posted on youtube : http://youtu.be/0rV2ZHSITNQ
So you installed the wrong kernel... Try to blindly flash correct philz kernel... Empty the sd card.. Then just place n7000 philz kernel and navigate blindly with the buttons to install.. May be take help from s2 philz recovery on your phone..
Hi can you help me , with my problem i have a s3 mini gt I8190, and i think broked it.
When i turn on the cellphone they stay in the first screen when they said the model of the cellphone... ( NOTE: NO IN THE SAMSUNG LOGO) ...
I already try installed the rom stock with odin and the archive param.. and the cellphone anyway stay in the model screen then they start restaring infinite times....
My cellphone enter in the modo donwload and recovery...
Thanks so much for your help.
If can be possible the mother board cant work anymore?
Im from Venezuela , sorry for my english.
Maybe having the same issue
markno27 said:
Hi can you help me , with my problem i have a s3 mini gt I8190, and i think broked it.
When i turn on the cellphone they stay in the first screen when they said the model of the cellphone... ( NOTE: NO IN THE SAMSUNG LOGO) ...
I already try installed the rom stock with odin and the archive param.. and the cellphone anyway stay in the model screen then they start restaring infinite times....
My cellphone enter in the modo donwload and recovery...
Thanks so much for your help.
If can be possible the mother board cant work anymore?
Im from Venezuela , sorry for my english.
Click to expand...
Click to collapse
Hi Markno27, I think I'm experiencing the same problem. When you flash the stock rom using Odin, is the auto reboot option on? If it is, turn it off and try flashing it again. When I do this I can see that although Odin says pass my phone download blue bar is not complete. Do you get the same result? It's happening with anything I try to flash using different version of Odin and Heimdall.