Related
i need help fast it keep rebooting all i did was upgrade cm6 and did a nandroid after that .. so i went to delete rom and reinstall it and it still boot loop now im stuck i hear reinstall the recovery but idk its not working
killacammiami said:
i need help fast it keep rebooting all i did was upgrade cm6 and did a nandroid after that .. so i went to delete rom and reinstall it and it still boot loop now im stuck i hear reinstall the recovery but idk its not working
Click to expand...
Click to collapse
need your EXACT process to help. which rom did you have? did you wipe all? which rom did you install? gapps? kernel? what recovery do you have? do you have any old nandroids? can you get into recovery?
i was on cm6 ext blue 17 vers then upgraded to dec 30 vs then i did a nandroid without rebooting ..... then when i restart it went into boot loop..... i can get into recovery and i wiped and installed diff rom and no luck still same thing\\\\.......\\
well i just fixed it ... i flashed another rom ....... idk y it worked but yea ..... idk thanks alot how do i delete this post?
wow i tryed to install the mau5 & cm6 rom but its not working sending me into reboot mode..but damage control v1 it didnt ...... i was using cm6 b4 this crap ..
killacammiami said:
i was on cm6 ext blue 17 vers then upgraded to dec 30 vs then i did a nandroid without rebooting ..... then when i restart it went into boot loop..... i can get into recovery and i wiped and installed diff rom and no luck still same thing\\\\.......\\
well i just fixed it ... i flashed another rom ....... idk y it worked but yea ..... idk thanks alot how do i delete this post?
Click to expand...
Click to collapse
1.always boot before you nandroid.
2.did you really get it? i don't think you can't delete a thread.
killacammiami said:
wow i tryed to install the mau5 & cm6 rom but its not working sending me into reboot mode..but damage control v1 it didnt ...... i was using cm6 b4 this crap ..
Click to expand...
Click to collapse
what? reboot into recovery, wipe EVERYTHING (full system,dalvik,cache) except your SD of course. once the wipe is done nandroid into an OLD known stable and then start over whatever you were doing. and always wipe before flashing, always boot before nanding. hope this helps.
hi
i m not able to install paranoid (any version) on my galaxy note... but rest of the custom roms are working fine...
everytime i install paranoid rom, it gets struck at the boot samsung logo and i cant even access to cwm recovery..
then the only option left for me is to revert back to stock 2.3.6 via odin and then root
is there any developer or expert who can rectify the problem so that i may be able to install paranoid on my note
chochweet said:
hi
i m not able to install paranoid (any version) on my galaxy note... but rest of the custom roms are working fine...
everytime i install paranoid rom, it gets struck at the boot samsung logo and i cant even access to cwm recovery..
then the only option left for me is to revert back to stock 2.3.6 via odin and then root
is there any developer or expert who can rectify the problem so that i may be able to install paranoid on my note
Click to expand...
Click to collapse
What process are you using to flash paranoid rom?
chochweet said:
hi
i m not able to install paranoid (any version) on my galaxy note... but rest of the custom roms are working fine...
everytime i install paranoid rom, it gets struck at the boot samsung logo and i cant even access to cwm recovery..
then the only option left for me is to revert back to stock 2.3.6 via odin and then root
is there any developer or expert who can rectify the problem so that i may be able to install paranoid on my note
Click to expand...
Click to collapse
Can you provide more info, what kernel and rom are you using to flash PA?
Hi
I tried it from ics (crash v8.1, liquid black 3.2, criskelorom v9, fusion Tom 2.5, rocket Tom v10) ........ no result
I tried it from the gb 2.3.6 (stock).... no result
I used clockworkmod recovery... abyss kernel
Everytime the same problem hung on the boot logo... and no access to clockworkmod recovery....
Sent from my GT-N7000 using xda app-developers app
Go back to gingerbread, root and install clockworkmod, put the pa ROM & gapps zip on your sdcard then go into recovery (cwm) factory wipe data 2-3 times, flash ROM then gapps next wipe cache 2-3 times, finally reboot and wait.
Sent From An Awesome Jelly Bean Galaxy Note
Att.Fan1982 said:
Go back to gingerbread, root and install clockworkmod, put the pa ROM & gapps zip on your sdcard then go into recovery (cwm) factory wipe data 2-3 times, flash ROM then gapps next wipe cache 2-3 times, finally reboot and wait.
Sent From An Awesome Jelly Bean Galaxy Note
Click to expand...
Click to collapse
Do I need to install abyss kernel to format and wipe or the native 5.0.2.7 recovery is enough.. and is it safe to wipe cache,format factory reset in stock 2.3.6 by cwm recovery 5.0.2.7
Sent from my GT-N7000 using xda app-developers app
It's safe to wipe using a gingerbread kernel in recovery which is exactly what abyss is, a gingerbread kernel. No need to use abyss if you're already on a gingerbread stock ROM.
Sent From An Awesome Jelly Bean Galaxy Note
Att.Fan1982 said:
It's safe to wipe using a gingerbread kernel in recovery which is exactly what abyss is, a gingerbread kernel. No need to use abyss if you're already on a gingerbread stock ROM.
Sent From An Awesome Jelly Bean Galaxy Note
Click to expand...
Click to collapse
Ok let me try
I will let u know about the progress
Sent from my GT-N7000 using xda app-developers app
Att.Fan1982 said:
It's safe to wipe using a gingerbread kernel in recovery which is exactly what abyss is, a gingerbread kernel. No need to use abyss if you're already on a gingerbread stock ROM.
Sent From An Awesome Jelly Bean Galaxy Note
Click to expand...
Click to collapse
done .... flashed stock 2.3.6 gb rom... flashed cwm recovery and did the same as u told me to do... but again struck on the boot screen logo...
i cant access recovery but can still access download mode....
even i cant understand where is the problem why paranoid is not working on my note.....confused
can i try installing paranoid without installing gapps..... will that work or not?
when you were on GB stock without rooting did you boot into recovery and wipe data, cache ?
( vol up + home + power ) buttons in combination together take you into recovery. you have to keep pressing till N7000 logo shows up, then u let go and then recovery appears
If you already know and done it then im sorry to repeat.
what method you followed to root GB ?
Att.Fan1982 said:
It's safe to wipe using a gingerbread kernel in recovery which is exactly what abyss is, a gingerbread kernel. No need to use abyss if you're already on a gingerbread stock ROM.
Sent From An Awesome Jelly Bean Galaxy Note
Click to expand...
Click to collapse
rraaka said:
when you were on GB stock without rooting did you boot into recovery and wipe data, cache ?
( vol up + home + power ) buttons in combination together take you into recovery. you have to keep pressing till N7000 logo shows up, then u let go and then recovery appears
If you already know and done it then im sorry to repeat.
what method you followed to root GB ?
Click to expand...
Click to collapse
i used CF-Root-SGN_ZS_MUL_KK1-v5.0-CWM5.rar to root and install recovery...
if you are still on this recovery, get into recovery and wipe data, cache, (advanced ) --- dalvik
give the names of the rom files you have downloaded to flash....
rraaka said:
if you are still on this recovery, get into recovery and wipe data, cache, (advanced ) --- dalvik
give the names of the rom files you have downloaded to flash....
Click to expand...
Click to collapse
190712-102621-STAXXTANIUM-v17.zip
paranoid_note_v05.zip
paranoid_note_v04a.zip
nothing is working
and when i try to install
crashrom
criskelrom
liquidblack
etc
they work fine...
its only when i try to install paranoid i get this problem.... cant understand y
there is one difference is paranoid and other roms is size... paranoid is abt 130mb but rest of the custom roms are 700 to 800 mb
your present status is this right ? - GB 2.3.6, rooted with cfroot, phone compltetly booted and working fine ?
you can get into recovery ?
rraaka said:
your present status is this right ? - GB 2.3.6, rooted with cfroot, phone compltetly booted and working fine ?
you can get into recovery ?
Click to expand...
Click to collapse
yes working absolutely perfect... and recovery is also acccessable...
stock and all other custom roms are working
only problem when i try to install any damn version of paranoid
you must keep gapps ics ready for flashing with PA v0.4a,
keep both zip files on sd card
get into recovery, wipe as told before
install zip from sd card ( remember the name and keep looking till you find it ) choose zip file,, flash it,
then same thing with gapps , flash
do the wipes again
then reboot phone ( first boot takes time so be patient )
you can use the present recovery or flash abyss kernel - --go to advanced -- reboot recovery ...etc etc ( same proceedure)
if this doesnt work ill tell you a method using CM9 safe kernel tar ( give me some time)
rraaka said:
you must keep gapps ics ready for flashing with PA v0.4a,
keep both zip files on sd card
get into recovery, wipe as told before
install zip from sd card ( remember the name and keep looking till you find it ) choose zip file,, flash it,
then same thing with gapps , flash
do the wipes again
then reboot phone ( first boot takes time so be patient )
you can use the present recovery or flash abyss kernel - --go to advanced -- reboot recovery ...etc etc ( same proceedure)
Click to expand...
Click to collapse
i have already tried this procedure so many times, but everytime after finishing installation, rebooting the phone and damn its struck again at boot logo.....
i think its the kernel and recovery which gets erased during the installation of paranoid thats y it gets struck at boot logo
Maybe you have a corrupted download. Check md5 sum to verify.
sahilarora2003 said:
Maybe you have a corrupted download. Check md5 sum to verify.
Click to expand...
Click to collapse
i verified all the zip files (roms) i downloaded..... everything is just fine
chochweet said:
i verified all the zip files (roms) i downloaded..... everything is just fine
Click to expand...
Click to collapse
Do these steps and let me know if its still there.
As I know you are on Rooted GB rom right now.
So Reboot into recovery
Full Wipe
Reboot Recovery
Go to Mounts and storage
Mount system
mount cache
mount data
Format data
Format system
Format Cache
Reboot Recovery
Now
Flash Paranoid Rom
Flash Gapps
Now Again Full Wipe
Reboot System
C if it works
Cheers
Just got my Galaxy S back from my Mum today (After I bricked it and sent for repair) she got a note2 omg... Decided to flash a custom rom..
Here goes..
First I followed this guide completelyhttp://http://wiki.cyanogenmod.org/wiki/Samsung_Galaxy_S:_Full_Update_Guide. After I flash the CM 10, my recovery was upgraded to v6.0.1.5 after reboot. But I cannot get pass the recovery. I will have the cm boot animation, then back to recovery again. Tried reflashing the rom, doesnt say any errors but still gets stuck at recovery.
Then I went thru the method at the wiki.cyanogenmod again and successfully flashed cwm recovery 2.5 again. Tried flashing the CM10 rom again but this time round, It shows a long error message ending with "status 7"
I am still able to go into download mode.
Was on stock unrooted 2.3.3 DXJV9.
I made the super no.1 noob mistake of not making a backup........... But, why is rooting and flashing of this phone so hard.....
Pls, any help is greatly appreciated.
Btw, I have manage to flash the stock image via odin but is still stuck in a boot loop.. after Odin completed and reboot, I am back into the stock recovery with the below error messages.
It will work
scpion said:
Btw, I have manage to flash the stock image via odin but is still stuck in a boot loop.. after Odin completed and reboot, I am back into the stock recovery with the below error messages.
Click to expand...
Click to collapse
When u see red error message in stock recovery........u just wipe cache and reboot.......it will work.....
i have wiped everything many times over. but I am still stuck in the bootloop. the red error messages looked serious though.
try this
scpion said:
i have wiped everything many times over. but I am still stuck in the bootloop. the red error messages looked serious though.
Click to expand...
Click to collapse
U just use GB jw4(your region) ROM (don't use single file like PDA).........you use files separately like this [PDA,phone,CSC,pit(512 or 513)]...............use Odin 1.85 for flashing files......,when u complete the flashing it automatically reboot to fulfill the flashing...........then also it gives red error means........ clear only wipe cache and don't clear wipe all data...........reboot your system..... I think this will work for u...........:fingers-crossed:
Thanks. Have it solved. Flashed with another rom with seperate files. I was using the the all in one previously. Got it to run CM10 nightly though till now still not too sure how... But, I m real happy now. It works great so far and I couldnt understand why Sammy refuse to roll out official ones even for 4.0..
Still trying to figure out how to root, flash SGS though.. I have done so for many other device but by far,... this phone is the most complicating....
Aj rocker root
By processor only we not getting stock ICS rom but we getting custom ROM by hacking processor.............
For rooting the ROM u want to be in stock GB ROM like 2.3.5 or 2.3.6 and then u want to download this file(http://download.chainfire.eu/132/CF-Root/SGS/CF-Root-XX_OXA_JVU_2.3.6-v4.3-CWM3RFS.zip)............. after download u want to open Odin 1.85 and select PDA then choose the downloaded file...........select start to flash the file.........reboot and enjoy the root bosssss......if u like this press thanks:fingers-crossed:
Just to make sure..
What I did was,
Flashed Android 2.3.5 XXJVS Firmware and rooted with CF-Root-XX_OXA_JVS-v4.1-CWM3RFS.zip
Flashed the speedmod kernel via heimdall
Wiped data/cache. Flashed Latest CM10 nightly
( at this point, there was a error "status 0" installation aborted. When I reboot, the CM10 boot animation flashed twice and it brought me straight to CWM 6.0.1.5. Is this normal behaviour?? Then, not too sure what to do, I wipe data/cache and flashed CM10 and gapps again. this time round, installation successful and after reboot it boot into CM10. )
Is the above normal behaviour?
Next time I wish to change rom, from where I now( CM10) just need to wipe Data/cache and flashed the other rom?
Try to see if you can flash another custom Rom, if that works then it could be that your files are corrupted..
Have you stated your problem over at CM forums..
# Sent from my blazing slimbean SGS i9000 using Tapatalk 2 #
scpion said:
Just to make sure..
What I did was,
Flashed Android 2.3.5 XXJVS Firmware and rooted with CF-Root-XX_OXA_JVS-v4.1-CWM3RFS.zip
Flashed the speedmod kernel via heimdall
Wiped data/cache. Flashed Latest CM10 nightly
( at this point, there was a error "status 0" installation aborted. When I reboot, the CM10 boot animation flashed twice and it brought me straight to CWM 6.0.1.5. Is this normal behaviour?? Then, not too sure what to do, I wipe data/cache and flashed CM10 and gapps again. this time round, installation successful and after reboot it boot into CM10. )
Is the above normal behaviour?
Next time I wish to change rom, from where I now( CM10) just need to wipe Data/cache and flashed the other rom?
Click to expand...
Click to collapse
OK fine first u want to know something boss......... every firmware having different layout........ correct procedure of flashing is u want to go step by step for enjoy the full features of the ROM ....... u r in GB ROM means then next u want to go ICS ROM........If u r in ICS ROM means then next u want to go jellybean rom and this the correct procedure to use new ROM without the problems...........:good:
scpion said:
Just to make sure..
What I did was,
Flashed Android 2.3.5 XXJVS Firmware and rooted with CF-Root-XX_OXA_JVS-v4.1-CWM3RFS.zip
Flashed the speedmod kernel via heimdall
Wiped data/cache. Flashed Latest CM10 nightly
( at this point, there was a error "status 0" installation aborted. When I reboot, the CM10 boot animation flashed twice and it brought me straight to CWM 6.0.1.5. Is this normal behaviour?? Then, not too sure what to do, I wipe data/cache and flashed CM10 and gapps again. this time round, installation successful and after reboot it boot into CM10. )
Is the above normal behaviour?
Next time I wish to change rom, from where I now( CM10) just need to wipe Data/cache and flashed the other rom?
Click to expand...
Click to collapse
OK fine first u want to know something boss......... every firmware having different layout........ correct procedure of flashing is u want to go step by step for enjoy the full features of the ROM ....... u r in GB ROM means then next u want to go ICS ROM........If u r in ICS ROM means then next u want to go jellybean rom and this the correct procedure to use new ROM without the problems...........:good:
Most times from GB to JB u have 2 flash custom 2, 3 times. So its normal when flashing custom the first time it takes u to bootanimation and hangs (take out battery and go to recovery with 3 button combo and flash again till it says install is completed) or directly into recovery.
If u wanna flash other jb rom just full wipe and flash new custom. Make sure u make a nandroid backup so u can go back easily
Hi! I have a problem with my Ace (s5830, rooted) My phone can't boot in if i switch off, and i want to switch on. It freeses at the samsung logo...
But if i boot into CWM (ver 5.0.2.4) and i choose 'reboot system now' it boots in fine and working.... How can i fix it? My rom is CM 10.2 modded by Mardon.
Do you use some script to mount ext4 partition like app2sd? I had the same problem when I installed app2sd and now I use link2sd and everything works great.
marciba said:
Hi! I have a problem with my Ace (s5830, rooted) My phone can't boot in if i switch off, and i want to switch on. It freeses at the samsung logo...
But if i boot into CWM (ver 5.0.2.4) and i choose 'reboot system now' it boots in fine and working.... How can i fix it? My rom is CM 10.2 modded by Mardon.
Click to expand...
Click to collapse
Try to do a full wipe and flash it again. Did you flash something with the rom (scripts or anything else)?
I have the same problem, but only when using Mardon's CM10.2
I wiped the phone numerous times completely and tried different roms, even going so far as to unroot and back to stock using Odin, and the phone turns off and back on and boots fine with those, but with CM10.2 if I turn the phone off, I have to enter CWM and then reboot in order for it to load the ROM.
yes of course
patafian1 said:
Do you use some script to mount ext4 partition like app2sd? I had the same problem when I installed app2sd and now I use link2sd and everything works great.
Click to expand...
Click to collapse
well i have a 128 mb ext-3 partition but i'm using Link2SD app...........
Benalimarwan said:
Try to do a full wipe and flash it again. Did you flash something with the rom (scripts or anything else)?
Click to expand...
Click to collapse
it doesn't solve my problem
My problem only with 4.3.x ROMs
paradoxiumwind said:
I have the same problem, but only when using Mardon's CM10.2
I wiped the phone numerous times completely and tried different roms, even going so far as to unroot and back to stock using Odin, and the phone turns off and back on and boots fine with those, but with CM10.2 if I turn the phone off, I have to enter CWM and then reboot in order for it to load the ROM.
Click to expand...
Click to collapse
well my ace botts in normally if i use android 4.2.x and lower but i have the problem with every 4.3.x rom i think it's a bootloader error....
Hi, I have flashed many roms in other devices and is the first time it happens to me and i don´t know why.
I flashed the latest firmware via odin then root and cwm, well. When I installed the CM rom with his wipes it boots first time, works perfect, but when i reboot it bootloops, but if do the wipes again it boots first time again but when I reboot bootloop again, any solutions? Thanks.
The Rom I flashed is this (winter release) http://forum.xda-developers.com/showthread.php?t=2212438
PhurionN said:
Hi, I have flashed many roms in other devices and is the first time it happens to me and i don´t know why.
I flashed the latest firmware via odin then root and cwm, well. When I installed the CM rom with his wipes it boots first time, works perfect, but when i reboot it bootloops, but if do the wipes again it boots first time again but when I reboot bootloop again, any solutions? Thanks.
The Rom I flashed is this (winter release) http://forum.xda-developers.com/showthread.php?t=2212438
Click to expand...
Click to collapse
I can assure you there is nothing wrong with the rom as I have personally used that rom as well as many others. Having said that, I will ask you to do all the necessary steps to install a rom.
1. flash stock via odin.
2. root your phone and flash cwm 5.
3. boot into recovery, do factory reset, cache wipe, dalvik wipe and format system in mounts and storage.
4. check the md5 sum of the rom for it's integrity and then copy it to sd.
5. flash the rom. reboot system.
first boot will take a bit of time. after setting everything reboot. your phone will boot just fine. have patience though. booting may take time. whatever happens, you should not be in bootloop now because rom is okay. good luck:good:
BRKsays said:
I can assure you there is nothing wrong with the rom as I have personally used that rom as well as many others. Having said that, I will ask you to do all the necessary steps to install a rom.
1. flash stock via odin.
2. root your phone and flash cwm 5.
3. boot into recovery, do factory reset, cache wipe, dalvik wipe and format system in mounts and storage.
4. check the md5 sum of the rom for it's integrity and then copy it to sd.
5. flash the rom. reboot system.
first boot will take a bit of time. after setting everything reboot. your phone will boot just fine. have patience though. booting may take time. whatever happens, you should not be in bootloop now because rom is okay. good luck:good:
Click to expand...
Click to collapse
I did it as you said and the rom boots, but when I reboot it goes bootloop and I don´t know why.
PhurionN said:
I did it as you said and the rom boots, but when I reboot it goes bootloop and I don´t know why.
Click to expand...
Click to collapse
i am having a similar problem .....i cant install any rom other than ultimatum
Magpir said:
i am having a similar problem .....i cant install any rom other than ultimatum
Click to expand...
Click to collapse
I solved it flashing CM 10.1 by MaclawStudio, awesome ROM, recomended :laugh:
PhurionN said:
I solved it flashing CM 10.1 by MaclawStudio, awesome ROM, recomended :laugh:
Click to expand...
Click to collapse
details please .....
Magpir said:
details please .....
Click to expand...
Click to collapse
Here is the ROM hope you enjoy it : http://maclaw.pl/downloads/#
PhurionN said:
Here is the ROM hope you enjoy it : http://maclaw.pl/downloads/#
Click to expand...
Click to collapse
ok thanks but my problem is in cm7 , icant install any other rom after flashing the ultimatum.
Magpir said:
ok thanks but my problem is in cm7 , icant install any other rom after flashing the ultimatum.
Click to expand...
Click to collapse
flash a stock firmware via odin then flash a custon rom after rooting and installing cwm, here is a tutorial, I hope this help you: http://forum.xda-developers.com/showthread.php?t=1034145