Database Develop

[Q] How to First time flash the Galaxy S

hello
Sory when i duble the post but i search for a info but i didnt find it...
What i need to to to flash into some custom rom, from stock galaxy s phone?
The phone is not hacked its stock from Shop.
Its there any step by step tutorial or somthing like that.
Thtas wil the first time of me to flash a android phone... so i need a good interpretation of this flashing. when have someone a good experience of this can he ad me on skype or hotmail to help me do this a first time
Skype brdi123
Hotmail [email protected]
Thnks to eweryone.

brdi said:
hello
Sory when i duble the post but i search for a info but i didnt find it...
What i need to to to flash into some custom rom, from stock galaxy s phone?
The phone is not hacked its stock from Shop.
Its there any step by step tutorial or somthing like that.
Thtas wil the first time of me to flash a android phone... so i need a good interpretation of this flashing. when have someone a good experience of this can he ad me on skype or hotmail to help me do this a first time
Skype brdi123
Hotmail [email protected]
Thnks to eweryone.
Click to expand...
Click to collapse
First of all, this question should not have been posed here.
Answer: There is nothing special that you need to do to your phone other than follow the installation instructions described in these ROM threads. It's just a matter of downloading files and put them in the root of the internal sd.

you really need to look at the FAQ. It's has EVERYTHING, you've search in the wrong section i'm afraid! Go to Q&A, it's all there, and then look at General to get you started.

Ok tnx for redirecting the thread.
But need i to root my phone before i flashin a custom rom ?

brdi said:
Ok tnx for redirecting the thread.
But need i to root my phone before i flashin a custom rom ?
Click to expand...
Click to collapse
As I have mentioned earlier, you do not have to do anything prior to flashing a custom rom...just follow their installation instructions.

donkeyhitman said:
As I have mentioned earlier, you do not have to do anything prior to flashing a custom rom...just follow their installation instructions.
Click to expand...
Click to collapse
So i need only to download a flash file and copy the file into intern memory and bot into recovery mode and flash the phone.
F.E. this rom
I only need to do the steps in the post no.3 and thats need to work... Its no mather when is my phone purchased in Slovenia?
Tnx

galaxy tab dead

Well as the title says. My GT has died ..... Fuy to put a rom and I fault the burden of odin rom. Odin gave me FAILED. And where is the blue bar downloding stood. Remove the wire and give the keys and power vol-I got a tablet with a PC and a triangle in the middle. I did a total reset to odin and reloaded and I recognized the table with those marks mentioned and I reloaded. with the same result. I say good because if I load this rom will be posting JM6 say that fixes everything. odin Todal tells me the "reset" and "pass " say COOL! SOLVED. Nothing is further from the truth. I have been on the screen that says "GALAXY Tab" and there does not happen. Try the ROM put him "BROKEN V4"with the same fate .... Probe with the kernel of "overcome " not at all a kernel of MoDaCo for the theme of recovery if the recovery was installed and nothing in odin ... FAIL. The fact is that this might not dead yet it let me access the DOWLOADIG. I think there must be something BOOT.ini. but the ideas are beyond me. if they could resurrect a DHD. but as a tab ... if not with your help I can do little more
install the JM6 and I get the picture but then stays Galay SAMSUNG TAB AND DOWN ... not start see image of odin
sorry for my English but the google translator

Do you have Cwm recovery installed? Tried to clear caches?
send from my SGT with Overcome...

spike1985 said:
Do you have Cwm recovery installed? Tried to clear caches?
send from my SGT with Overcome...
Click to expand...
Click to collapse
No. CWM ..... NOT installed
I'm trying with. md5 and this is pit: P1_add_hidden.pit
but will not start ....
edit: the. cfg not to put it .....

Go to overcome thread and download the guide attached there, read carrefull what inside and you will, probably, fix the problem.
Sent from my GT-P1000 using XDA Premium App

af974 said:
Go to overcome thread and download the guide attached there, read carrefull what inside and you will, probably, fix the problem.
Sent from my GT-P1000 using XDA Premium App
Click to expand...
Click to collapse
Where is the guide?? sorry my bad English and I translate by google ... if you make me so kind as to put the thread .... I give thank you very much

My Tab was once in a state like this with the exclamation mark and picture of the little pc. I believe it's fixable, and I also think that it's actually harder to permanently brick these things than would first seem. I remember I even had an error during repartitioning, surely that would have been curtains but it wasn't.
This was my experience, and in my post I link to another post that contains some useful information on getting out of that error: http://forum.xda-developers.com/showpost.php?p=12719559&postcount=13

Try it like this
Uncheck repartition
Remove the pit file
Do not add anything for the 'Phone' and 'CSC' portion.
Just flash the PDA section.
See if that works.

This is the Dev forum, not questions forum.
Sent from my HTC HD2 using XDA Premium App

http://files.deodexed.com/ModADroid-Galaxy-Tablet/Rotohammer/JME/
Use this link. Download modem file and full file. Then flash with pit in odin. It will work. Same thing happened to me.
As long as you can access downloading screen it's not dead.
Sent from my GT-P1000 using XDA Premium App

This medthod work for me
1. wait until the TAB discharge (about 1 Day)
2. Connect the tab to the computer
3. wait about 10 minutes
4.After boot please start odin
5.open odin and see status connect with odin and selcet pit file from your download
http://www.4shared.com/file/pThcn9Ml/P1000_new_Odin3_v17.html
After flash pit wait a minute your phone will reboot in to recover mode and restart
to samsung logo page
6.Flash roto firmware with ordin ( if can't flash with odin will change to Heimdall_1.1.1
http://files.deodexed.com/ModADroid-Galaxy-Tablet/Rotohammer/KM2/Roto-KM2-Full-v1.zip
7.After finish reboot your phone and boot into roto rom
8.Go to recovery mode
9.Flash customer firmware ( I used Overcome 1.6.4 )

shoman24v said:
Try it like this
Uncheck repartition
Remove the pit file
Do not add anything for the 'Phone' and 'CSC' portion.
Just flash the PDA section.
See if that works.
Click to expand...
Click to collapse
FAIL!!!!!
thanks
I installed the kernel Overcome. this time it gave me failed to install but still no recovery. continues in the same state snif snif snif
all the above steps with "broken", JM6 JME have been nil .... BOOT.ini problem is I think

chemita said:
Where is the guide?? sorry my bad English and I translate by google ... if you make me so kind as to put the thread .... I give thank you very much
Click to expand...
Click to collapse
http://forum.xda-developers.com/attachment.php?attachmentid=585587&d=1304441485

Filgaliel said:
http://forum.xda-developers.com/attachment.php?attachmentid=585587&d=1304441485
Click to expand...
Click to collapse
you mean this part?. @Filgaliel
Please download the following files:  You should download the NEW JMK-stock-safe.zip from the following link: http://www.multiupload.com/U88JTJ4P10 (if you’ve downloaded the JMK-stock-safe.zip prior to 21 April, please download this new version!)
 You should download the Overcome ROM 1.6.4 (Overcome_v1.6.4_Full.zip) file from the following link: http://www.multiupload.com/GYOVUEW9P5
 You should download the Overcome Kernel 2.1.6 (Overcome_Kernel_v2.1.6_OCUV_ODIN.tar) file from the following link: http://forum.xda-developers.com/attachment.php?attachmentid=585421&d=1304425298
 You must have enough space on your internal storage (henceforth referred to as Internal SD, as opposed to the External S) So, please clear some space. A free space of about 4GB should suffice

Yes. Try that. It should work.

Filgaliel said:
Yes. Try that. It should work.
Click to expand...
Click to collapse
Well .... I'll try .... I work 10 pm to 6 am on Wednesday are 5 pm and I still do not sleep for trying to fix

Sorry to hear this, however PLEASE READ THE FORUM RULES AND POST IN THE CORRECT FORUM.
Sigh. I wish I was a moderator.

antiochasylum said:
Sorry to hear this, however PLEASE READ THE FORUM RULES AND POST IN THE CORRECT FORUM.
Sigh. I wish I was a moderator.
Click to expand...
Click to collapse
@antiochasylum I'd like to fix my problem .... I think this in the right forum or not is a bad rom flash?? Not everyone is as smart as you

TheATHEiST said:
This is the Dev forum, not questions forum.
Sent from my HTC HD2 using XDA Premium App
Click to expand...
Click to collapse
It is SO COOL to have you policing the forums! I don't know what we would do without your valuable and always helpful input.
I am sure XDA would be a post-apocalyptic wasteland of massive proportions were it not for you being the glue holding it all together.
So THANK YOU.

antiochasylum said:
Sigh. I wish I was a moderator.
Click to expand...
Click to collapse
You´re not.

now **** out now and does not charge the battery .... uuuuffff amount a circus and I grow dwarf

[Q] P1000 Brick

Sorry for the long thread but please read and help me !
Sorry moderators i tried looking for my post didnt find where you placed it. so making a new and clear where i'll tell what i ve done to my tablet.
firstly my p1000 was froyo 2.2 and i didnt checked that and tried to upgrade it to jelly bean, that was the first stupidity of my.
while doing that i faced many problems and concluded that it was brick.
how ever i had rooted my phone with super one click root..
later when it was bricked i again rooted it with cwm recovery by help of cmd.
then it was more complex, i then tried to roll it back and installed the firmware but the firmware i installed was wrong region again it went more complex.
then from some thread, i again used odin and pit it and installed some other firmware. that didnt work so i did something with heimdall suite as it was instructed and mess something with zImage thing.. all failed.
now i ve finally came up with no solution and thinking what the mess i ve done.
please help me.
now odin dont recognize the phone.
the phone is booting till the samsung welcome screen i can also listen the sound.
it also goes to cwm recovery screen and also goes to downloading screen.
please tell me a way so that it can go to normal i am happy with 2.2 froyo only.
tell me a way, please give me download links so that i dont mess it again.
remember odin not accepting it, i ve charged the phone fully and also installed the samsung usb drivers but its not helping..

Follow the link in my signature.
Download the guide and gb stock safe.
Jump to page 7.
Go to download mode. Connect cable. Start Odin.
You may want to remove zadig/heimdall if possible.
Better if you can get a clean PC and install driver from gb stock safe.
Sent from my GT-P1000 using xda app-developers app

yes, i am sure it is because of heimdall suite,..
thanks a lot you are so helping i will be posting here only now

Your post was within another thread two from the top of this forum with you as the last poster but don't worry any more. As you've now created a new thread which is much clearer I've deleted the other posts so that all your questions and can answers on this subject can be kept together here.
Thanks
AvRS

AvRS said:
Your post was within another thread two from the top of this forum with you as the last poster but don't worry any more. As you've now created a new thread which is much clearer I've deleted the other posts so that all your questions and can answers on this subject can be kept together here.
Thanks
AvRS
Click to expand...
Click to collapse
i am really really sorry for all the inconvenience ,
i was a bit shocked as my tablet got bricked, so made such silly posts and created the problems.
but thanks for understanding my conditions.

priyana said:
Follow the link in my signature.
Download the guide and gb stock safe.
Jump to page 7.
Go to download mode. Connect cable. Start Odin.
You may want to remove zadig/heimdall if possible.
Better if you can get a clean PC and install driver from gb stock safe.
Sent from my GT-P1000 using xda app-developers app
Click to expand...
Click to collapse
i would like to give you a big big big thanks for helping me out..
this forum is the best forum over the web as i got my problem solved,
not only helped me to unbrick my tablet but also now its upgraded to 4.1 jelly beans.
Priyana without you my tablet would be ended with a hard brick.
Thanks a lot.

No network !!
after all the hard work and all flashing thing, i upgraded it to Android 4.1.1 Jelly Bean via CyanogenMod 10
but now the problem is i cant find the network ..

Are-you talking about wifi? If so, check this thread: http://forum.xda-developers.com/showthread.php?t=1874634&highlight=modem+bin

glussier said:
Are-you talking about wifi? If so, check this thread: http://forum.xda-developers.com/showthread.php?t=1874634&highlight=modem+bin
Click to expand...
Click to collapse
i am sorry for not being clear, i was talking about the mobile network.
i searched on forum, and what i understand is i have to copy modem.bin file to data/vendor.
but i dont know which modem file to copy.

You can extract modem.bin from the rom that you have downloaded.

uryv
glussier said:
You can extract modem.bin from the rom that you have downloaded.
Click to expand...
Click to collapse
i did that... but still not able to make any calls. my sim card is working on other phone though.
have tried flashing modem.bin and also tried copy and paste in vendor folder.
but its not working searching all over the forum but i dont know what to do

Settings>about tablet>Status> Service state : out of service / Mobile network state : disconnected / MDN : unknown

Where did you get the modem.bin from and which network you belong to.
I recommend starting by looking at gb stock safe, when you unpack there are a few modem.bin
Start with JPZ modem and stick it in /radio/ if latest cm10
Or to /system/vendor for slightly older one.
Sent from my GT-I9300 using xda app-developers app

priyana said:
Where did you get the modem.bin from and which network you belong to.
I recommend starting by looking at gb stock safe, when you unpack there are a few modem.bin
Start with JPZ modem and stick it in /radio/ if latest cm10
Or to /system/vendor for slightly older one.
Sent from my GT-I9300 using xda app-developers app
Click to expand...
Click to collapse
in gb stock safe, it was jpz modem file.. which i used to flash and it was flashed very well and there was no problem in anything.
later on when i upgraded for 4.1.1 it was also installed normally with no problem the only problem i encountered is i cant make any calls from it.
even the imei number is changed of my phone.
i also sticked the file in system/vendor .. i tried with the both file the jpz which i had from gb stock file and another from the firmware.
well now i trying to go for the latest cyanogen 4.1.1 hope everything get normal in it, and try to stick file in radio.
can you tell me particularly which file to copy and where ?
in gb stock jpz worked fine.. should i go for it ?

yes the same jpz modem.bin file into /radio/modem.bin
the one in the CM10 might be corrupted, who knows.

priyana said:
yes the same jpz modem.bin file into /radio/modem.bin
the one in the CM10 might be corrupted, who knows.
Click to expand...
Click to collapse
hmm yea you were right.. and it was stupid of me i was using a old version cyanogen.. it downloaded the latest nightly and it worked fine..
but i think something google apps that.. the apps are limited as earlier i used to keep on scrolling and the apps list was like infinite now it seems as there are just 200 apps in it..
give me a link of latest gapps file plzz

Gapps only a few apps in it.
http://goo.im/gapps
Choose correctly, ics or jb.
Sent from my GT-P1000 using xda app-developers app

[Q] i9305 Unofficial cm11

Hi!
I'm wanting to install that unofficial CM 11 for my international I9305, already running TWRP 2.6.3.0 on it and apparently i need to use the custom recoveries posted in the thread.
My question is though, how do i flash the .img files using odin, or an app, or is it possible to do with twrp itself booted up into recovery ? i've searched high and low, and just can't seem to find a straight answer - so here i am, bear with me, i'm tired

You can download an app called mobile Odin and use that to flash your .img files just using your phone!
You need to rename it to recovery.img for it to be detected though!
Sent from my GT-I9305 using Tapatalk

If there is another way than that, I'd appreciate it. I cannot purchase apps in the app store currently. So that's unfortunately a no go

CM 11 Q&A thread ???
As you dont have a clue about anything suggest you start by reading the basic faqs and guides before bricking your phone .
Basics read first.
http://forum.xda-developers.com/showthread.php?t=2344125
Critical you read the first two posts .

Didn't see that thread at all until earlier as a second glance, i got plenty of clue though.
But an overload of information all pointing in different directions, each of them seeming to be correct is making me a little cautious when all i want is to know how i manually update my TWRP with the provided recovery.img file in that post, but i'll take my answer there instead for help.

sid378 said:
Didn't see that thread at all until earlier as a second glance, i got plenty of clue though.
But an overload of information all pointing in different directions, each of them seeming to be correct is making me a little cautious when all i want is to know how i manually update my TWRP with the provided recovery.img file in that post, but i'll take my answer there instead for help.
Click to expand...
Click to collapse
Faqs flash zip via recovery flash tar via odin no if ands or buts .

But....! That wouldn't be a problem at all to flash, except what I was provided was a recovery.img file.. That's my hindrance currently

Flash it with mobile odin.
Sent from my GT-I9305 using XDA Premium 4 mobile app

sid378 said:
If there is another way than that, I'd appreciate it. I cannot purchase apps in the app store currently. So that's unfortunately a no go
Click to expand...
Click to collapse
You can get the APK from his thread over here ---> http://forum.xda-developers.com/showthread.php?t=1347899

Bloatware script help

Ok. So im trying to install the bloatware removal script by @CoOoL_BoY. I will post the link to the original topic and hopefully sombody can help.
http://forum.xda-developers.com/showthread.php?t=2464694
So this is my problem. I have the AT&T Note 3 which as far as i know has a locked bootloader or somthing like that. I cant find anywhere to install CWM or TWRP i cant find any downloads for that recovery tool for my phone, from what i see they dont exist so can sombody please help me get this script installed to my phone. Is there some other app that will flash the script to my phone or do whatever needs to be done so i can get it to work. My phone is rooted and i have tried to get CWM and TWRP and it doesnt work. Is there an alternative or somthing i can use. Any help would be great thanks in advance. I have the MJ5 build and on 4.3
Sent from my SAMSUNG-SM-N900A using xda app-developers app

Yes we have a locked bootloader. We have to use safestrap instead of the usual recovery like cwm or twrp.
Read this...
http://forum.xda-developers.com/showthread.php?t=2572978
And I suggest you read this too...
http://forum.xda-developers.com/showthread.php?t=2629380

440bro said:
Yes we have a locked bootloader. We have to use safestrap instead of the usual recovery like cwm or twrp.
Read this...
http://forum.xda-developers.com/showthread.php?t=2572978
And I suggest you read this too...
http://forum.xda-developers.com/showthread.php?t=2629380
Click to expand...
Click to collapse
Thank you so much i saw this post before but i stayed away from it because im new to android and this rooting/hacking...im not gonna lie ive always been an iphone person with a jailbreak but i dont hate on either phone because they are both great just personal preference. but thanks for the help now i have that working soll my last thing to figure out that scares me the most lol is installing new roms because thats how my first android messed up then i switched to iphone and have used them forever. do you know of a post that shows you how to set up the rom i can only find a post of compatible roms but i went to the safestrap screen and there is 4 rom slots and my stock rom slot and im not sure what any of that means.

34995689
440bro said:
Yes we have a locked bootloader. We have to use safestrap instead of the usual recovery like cwm or twrp.
Read this...
http://forum.xda-developers.com/showthread.php?t=2572978
And I suggest you read this too...
http://forum.xda-developers.com/showthread.php?t=2629380
Click to expand...
Click to collapse
Hi there, I have a question also,
Do I need to flash a custom rom using safestrap and then flash the script, or can I just use safestrap to flash the script on my ATT stock rom?
Thank you in advance.