Well as the title says. My GT has died ..... Fuy to put a rom and I fault the burden of odin rom. Odin gave me FAILED. And where is the blue bar downloding stood. Remove the wire and give the keys and power vol-I got a tablet with a PC and a triangle in the middle. I did a total reset to odin and reloaded and I recognized the table with those marks mentioned and I reloaded. with the same result. I say good because if I load this rom will be posting JM6 say that fixes everything. odin Todal tells me the "reset" and "pass " say COOL! SOLVED. Nothing is further from the truth. I have been on the screen that says "GALAXY Tab" and there does not happen. Try the ROM put him "BROKEN V4"with the same fate .... Probe with the kernel of "overcome " not at all a kernel of MoDaCo for the theme of recovery if the recovery was installed and nothing in odin ... FAIL. The fact is that this might not dead yet it let me access the DOWLOADIG. I think there must be something BOOT.ini. but the ideas are beyond me. if they could resurrect a DHD. but as a tab ... if not with your help I can do little more
install the JM6 and I get the picture but then stays Galay SAMSUNG TAB AND DOWN ... not start see image of odin
sorry for my English but the google translator
Do you have Cwm recovery installed? Tried to clear caches?
send from my SGT with Overcome...
spike1985 said:
Do you have Cwm recovery installed? Tried to clear caches?
send from my SGT with Overcome...
Click to expand...
Click to collapse
No. CWM ..... NOT installed
I'm trying with. md5 and this is pit: P1_add_hidden.pit
but will not start ....
edit: the. cfg not to put it .....
Go to overcome thread and download the guide attached there, read carrefull what inside and you will, probably, fix the problem.
Sent from my GT-P1000 using XDA Premium App
af974 said:
Go to overcome thread and download the guide attached there, read carrefull what inside and you will, probably, fix the problem.
Sent from my GT-P1000 using XDA Premium App
Click to expand...
Click to collapse
Where is the guide?? sorry my bad English and I translate by google ... if you make me so kind as to put the thread .... I give thank you very much
My Tab was once in a state like this with the exclamation mark and picture of the little pc. I believe it's fixable, and I also think that it's actually harder to permanently brick these things than would first seem. I remember I even had an error during repartitioning, surely that would have been curtains but it wasn't.
This was my experience, and in my post I link to another post that contains some useful information on getting out of that error: http://forum.xda-developers.com/showpost.php?p=12719559&postcount=13
Try it like this
Uncheck repartition
Remove the pit file
Do not add anything for the 'Phone' and 'CSC' portion.
Just flash the PDA section.
See if that works.
This is the Dev forum, not questions forum.
Sent from my HTC HD2 using XDA Premium App
http://files.deodexed.com/ModADroid-Galaxy-Tablet/Rotohammer/JME/
Use this link. Download modem file and full file. Then flash with pit in odin. It will work. Same thing happened to me.
As long as you can access downloading screen it's not dead.
Sent from my GT-P1000 using XDA Premium App
This medthod work for me
1. wait until the TAB discharge (about 1 Day)
2. Connect the tab to the computer
3. wait about 10 minutes
4.After boot please start odin
5.open odin and see status connect with odin and selcet pit file from your download
http://www.4shared.com/file/pThcn9Ml/P1000_new_Odin3_v17.html
After flash pit wait a minute your phone will reboot in to recover mode and restart
to samsung logo page
6.Flash roto firmware with ordin ( if can't flash with odin will change to Heimdall_1.1.1
http://files.deodexed.com/ModADroid-Galaxy-Tablet/Rotohammer/KM2/Roto-KM2-Full-v1.zip
7.After finish reboot your phone and boot into roto rom
8.Go to recovery mode
9.Flash customer firmware ( I used Overcome 1.6.4 )
shoman24v said:
Try it like this
Uncheck repartition
Remove the pit file
Do not add anything for the 'Phone' and 'CSC' portion.
Just flash the PDA section.
See if that works.
Click to expand...
Click to collapse
FAIL!!!!!
thanks
I installed the kernel Overcome. this time it gave me failed to install but still no recovery. continues in the same state snif snif snif
all the above steps with "broken", JM6 JME have been nil .... BOOT.ini problem is I think
chemita said:
Where is the guide?? sorry my bad English and I translate by google ... if you make me so kind as to put the thread .... I give thank you very much
Click to expand...
Click to collapse
http://forum.xda-developers.com/attachment.php?attachmentid=585587&d=1304441485
Filgaliel said:
http://forum.xda-developers.com/attachment.php?attachmentid=585587&d=1304441485
Click to expand...
Click to collapse
you mean this part?. @Filgaliel
Please download the following files: You should download the NEW JMK-stock-safe.zip from the following link: http://www.multiupload.com/U88JTJ4P10 (if you’ve downloaded the JMK-stock-safe.zip prior to 21 April, please download this new version!)
You should download the Overcome ROM 1.6.4 (Overcome_v1.6.4_Full.zip) file from the following link: http://www.multiupload.com/GYOVUEW9P5
You should download the Overcome Kernel 2.1.6 (Overcome_Kernel_v2.1.6_OCUV_ODIN.tar) file from the following link: http://forum.xda-developers.com/attachment.php?attachmentid=585421&d=1304425298
You must have enough space on your internal storage (henceforth referred to as Internal SD, as opposed to the External S) So, please clear some space. A free space of about 4GB should suffice
Yes. Try that. It should work.
Filgaliel said:
Yes. Try that. It should work.
Click to expand...
Click to collapse
Well .... I'll try .... I work 10 pm to 6 am on Wednesday are 5 pm and I still do not sleep for trying to fix
Sorry to hear this, however PLEASE READ THE FORUM RULES AND POST IN THE CORRECT FORUM.
Sigh. I wish I was a moderator.
antiochasylum said:
Sorry to hear this, however PLEASE READ THE FORUM RULES AND POST IN THE CORRECT FORUM.
Sigh. I wish I was a moderator.
Click to expand...
Click to collapse
@antiochasylum I'd like to fix my problem .... I think this in the right forum or not is a bad rom flash?? Not everyone is as smart as you
TheATHEiST said:
This is the Dev forum, not questions forum.
Sent from my HTC HD2 using XDA Premium App
Click to expand...
Click to collapse
It is SO COOL to have you policing the forums! I don't know what we would do without your valuable and always helpful input.
I am sure XDA would be a post-apocalyptic wasteland of massive proportions were it not for you being the glue holding it all together.
So THANK YOU.
antiochasylum said:
Sigh. I wish I was a moderator.
Click to expand...
Click to collapse
You´re not.
now **** out now and does not charge the battery .... uuuuffff amount a circus and I grow dwarf
Related
I sent it into warranty because I removed the data cable while it was flashing (Odin Multi Downloader (Android) was writing in the black box and it was stuck at MIBIB)
It had 2.3.6 XWHTH/XWKT4 installed.
When I recieved it I noticed it has 2.2.1 XXKB1/XWKA8. When connected to ODIN, it detects it, it adds it but in the black box mentioned above is still Odin Multi Downloader (Android)
I am afraid to start the update because .. you know.. I don't wanna send it again 300 miles away from here.
Is it safe to proceed?
ODIN v4.38
Tass v.1.0
.tar/.md5 file OK
:angel:
why not use the Odin created for galaxy mini which show gt-s5570
... Can you explain me.. A little more.. Like a link or something? :/
Sent from my GT-S5570 using xda app-developers app
I guess this Tutorial (http://forum.xda-developers.com/showthread.php?t=1255305) should be fair enough.
Follow the steps as mentioned there, with your current downloaded firmware.
coolsandie said:
I guess this Tutorial (http://forum.xda-developers.com/showthread.php?t=1255305) should be fair enough.
Follow the steps as mentioned there, with your current downloaded firmware.
Click to expand...
Click to collapse
Well... This is happening on my screen, it is the same like when the update failed.
I just want to know If I will not wreck my phone if I go with it.
www.flickr.com/photos/[email protected]3/7703931556/
Ginga:| said:
Well... This is happening on my screen, it is the same like when the update failed.
I just want to know If I will not wreck my phone if I go with it.
www.flickr.com/photos/[email protected]/7703931556/
Click to expand...
Click to collapse
I guess it fine, whether it shows Android or GT-S5570 (happened to me at times) Just use Tass_v1.0.ops and the one package system, your screenshot looks fine.
Just check whether your downloaded firmware is good, just try extracting.
Even I got the same error that you've mentioned in your first post, that MIBIB error message. Just try again. If it doesn't work download another version and try flashing it.
EDIT: Probably you won't brick your device because Odin will not flash the firmware past that MIBIB error.
Dear all
I have brick my GT-S5830 when downgrading it by odin and S5830XXJLC stock ROM... Now I can’t be able to power it on or goes in DOWNLOADING mod…
I was stuck on downgrading process..And unplug the cable manually from Computer..After that it can’t be powered on and also can’t able to go on downloading the mod…
Any suggestion for fixing this problem??
itsmerabbi said:
Dear all
I have brick my GT-S5830 when downgrading it by odin and S5830XXJLC stock ROM... Now I can’t be able to power it on or goes in DOWNLOADING mod…
I was stuck on downgrading process..And unplug the cable manually from Computer..After that it can’t be powered on and also can’t able to go on downloading the mod…
Any suggestion for fixing this problem??
Click to expand...
Click to collapse
Go to samsung service center and say the phone turns off while updating via kies
Sent from my GT-S5830 using xda premium
itsmerabbi said:
Dear all
I have brick my GT-S5830 when downgrading it by odin and S5830XXJLC stock ROM... Now I can’t be able to power it on or goes in DOWNLOADING mod…
I was stuck on downgrading process..And unplug the cable manually from Computer..After that it can’t be powered on and also can’t able to go on downloading the mod…
Any suggestion for fixing this problem??
Click to expand...
Click to collapse
Download DDKQ8 and flash via Odin, it is much better.
Sent from my GT-S5830 using xda app-developers app
Never tried this method, read it somewhere in thread, give it a try
Remove the battery and now press the buttons for downloading mode and simultaneously insert the battery,
It might get into download mode as said in that thread
If u get dld mode then flash ddkq8 by Odin
Sent from galaxy ace running S3 beta 3.1 evolution
Questions should be posted in the appropriate section.
15. Keep posts/threads on-topic
Whilst a minor amount of off-topic posting may be overlooked, the general rule is your posts / threads must be relevant to the Forum / thread in which you are posting.
Click to expand...
Click to collapse
I'm moving this one.
http://forum.xda-developers.com/showthread.php?t=1071970
This should work. It was already mentioned above, sort of, but a full thread on unbricking wouldn't hurt. Also, when said to prepare ODIN it means to click on PDA and choose the rom you're going to flash. Everything else seems clear.
eagleeyetom said:
Questions should be posted in the appropriate section.
I'm moving this one.
Click to expand...
Click to collapse
Thanks for this....
hirohito_protagonist said:
http://forum.xda-developers.com/showthread.php?t=1071970
This should work. It was already mentioned above, sort of, but a full thread on unbricking wouldn't hurt. Also, when said to prepare ODIN it means to click on PDA and choose the rom you're going to flash. Everything else seems clear.
Click to expand...
Click to collapse
I have tried this but it isn't working for me....
Sorry for the long thread but please read and help me !
Sorry moderators i tried looking for my post didnt find where you placed it. so making a new and clear where i'll tell what i ve done to my tablet.
firstly my p1000 was froyo 2.2 and i didnt checked that and tried to upgrade it to jelly bean, that was the first stupidity of my.
while doing that i faced many problems and concluded that it was brick.
how ever i had rooted my phone with super one click root..
later when it was bricked i again rooted it with cwm recovery by help of cmd.
then it was more complex, i then tried to roll it back and installed the firmware but the firmware i installed was wrong region again it went more complex.
then from some thread, i again used odin and pit it and installed some other firmware. that didnt work so i did something with heimdall suite as it was instructed and mess something with zImage thing.. all failed.
now i ve finally came up with no solution and thinking what the mess i ve done.
please help me.
now odin dont recognize the phone.
the phone is booting till the samsung welcome screen i can also listen the sound.
it also goes to cwm recovery screen and also goes to downloading screen.
please tell me a way so that it can go to normal i am happy with 2.2 froyo only.
tell me a way, please give me download links so that i dont mess it again.
remember odin not accepting it, i ve charged the phone fully and also installed the samsung usb drivers but its not helping..
Follow the link in my signature.
Download the guide and gb stock safe.
Jump to page 7.
Go to download mode. Connect cable. Start Odin.
You may want to remove zadig/heimdall if possible.
Better if you can get a clean PC and install driver from gb stock safe.
Sent from my GT-P1000 using xda app-developers app
yes, i am sure it is because of heimdall suite,..
thanks a lot you are so helping i will be posting here only now
Your post was within another thread two from the top of this forum with you as the last poster but don't worry any more. As you've now created a new thread which is much clearer I've deleted the other posts so that all your questions and can answers on this subject can be kept together here.
Thanks
AvRS
AvRS said:
Your post was within another thread two from the top of this forum with you as the last poster but don't worry any more. As you've now created a new thread which is much clearer I've deleted the other posts so that all your questions and can answers on this subject can be kept together here.
Thanks
AvRS
Click to expand...
Click to collapse
i am really really sorry for all the inconvenience ,
i was a bit shocked as my tablet got bricked, so made such silly posts and created the problems.
but thanks for understanding my conditions.
priyana said:
Follow the link in my signature.
Download the guide and gb stock safe.
Jump to page 7.
Go to download mode. Connect cable. Start Odin.
You may want to remove zadig/heimdall if possible.
Better if you can get a clean PC and install driver from gb stock safe.
Sent from my GT-P1000 using xda app-developers app
Click to expand...
Click to collapse
i would like to give you a big big big thanks for helping me out..
this forum is the best forum over the web as i got my problem solved,
not only helped me to unbrick my tablet but also now its upgraded to 4.1 jelly beans.
Priyana without you my tablet would be ended with a hard brick.
Thanks a lot.
No network !!
after all the hard work and all flashing thing, i upgraded it to Android 4.1.1 Jelly Bean via CyanogenMod 10
but now the problem is i cant find the network ..
Are-you talking about wifi? If so, check this thread: http://forum.xda-developers.com/showthread.php?t=1874634&highlight=modem+bin
glussier said:
Are-you talking about wifi? If so, check this thread: http://forum.xda-developers.com/showthread.php?t=1874634&highlight=modem+bin
Click to expand...
Click to collapse
i am sorry for not being clear, i was talking about the mobile network.
i searched on forum, and what i understand is i have to copy modem.bin file to data/vendor.
but i dont know which modem file to copy.
You can extract modem.bin from the rom that you have downloaded.
uryv
glussier said:
You can extract modem.bin from the rom that you have downloaded.
Click to expand...
Click to collapse
i did that... but still not able to make any calls. my sim card is working on other phone though.
have tried flashing modem.bin and also tried copy and paste in vendor folder.
but its not working searching all over the forum but i dont know what to do
Settings>about tablet>Status> Service state : out of service / Mobile network state : disconnected / MDN : unknown
Where did you get the modem.bin from and which network you belong to.
I recommend starting by looking at gb stock safe, when you unpack there are a few modem.bin
Start with JPZ modem and stick it in /radio/ if latest cm10
Or to /system/vendor for slightly older one.
Sent from my GT-I9300 using xda app-developers app
priyana said:
Where did you get the modem.bin from and which network you belong to.
I recommend starting by looking at gb stock safe, when you unpack there are a few modem.bin
Start with JPZ modem and stick it in /radio/ if latest cm10
Or to /system/vendor for slightly older one.
Sent from my GT-I9300 using xda app-developers app
Click to expand...
Click to collapse
in gb stock safe, it was jpz modem file.. which i used to flash and it was flashed very well and there was no problem in anything.
later on when i upgraded for 4.1.1 it was also installed normally with no problem the only problem i encountered is i cant make any calls from it.
even the imei number is changed of my phone.
i also sticked the file in system/vendor .. i tried with the both file the jpz which i had from gb stock file and another from the firmware.
well now i trying to go for the latest cyanogen 4.1.1 hope everything get normal in it, and try to stick file in radio.
can you tell me particularly which file to copy and where ?
in gb stock jpz worked fine.. should i go for it ?
yes the same jpz modem.bin file into /radio/modem.bin
the one in the CM10 might be corrupted, who knows.
priyana said:
yes the same jpz modem.bin file into /radio/modem.bin
the one in the CM10 might be corrupted, who knows.
Click to expand...
Click to collapse
hmm yea you were right.. and it was stupid of me i was using a old version cyanogen.. it downloaded the latest nightly and it worked fine..
but i think something google apps that.. the apps are limited as earlier i used to keep on scrolling and the apps list was like infinite now it seems as there are just 200 apps in it..
give me a link of latest gapps file plzz
Gapps only a few apps in it.
http://goo.im/gapps
Choose correctly, ics or jb.
Sent from my GT-P1000 using xda app-developers app
So im lost. I flashed the wrong rom and bricked my vzw tab. First time iv ever bricked any device unfortunately. How do i fix it? Odin? Im not boot looping and i cant get into recovery but i believe i can get into download mode. And advice and id be very thankful. Or do i have a new paperweight
Sent from my LG-LS970 using xda app-developers app
Odin/heimdall flash stock rom in download mode should take care of it.
Sent from my GT-P1000 using xda app-developers app
Thanks im.stressed because its not charging...that okay to odin on low batt
Sent from my LG-LS970 using xda app-developers app
so im working on this today and i cant get into download mode. i only see the phone and a computer with a orange triangle in the middle. i saw a video of how to fix it but i couldnt download the files. can anyone please point me to the right thread.
In that mode (secondary download mode) you should be able to flash if Odin detects.
Sometimes you need to keep trying until suddenly Odin detects it, and flash away.
priyana said:
In that mode (secondary download mode) you should be able to flash if Odin detects.
Sometimes you need to keep trying until suddenly Odin detects it, and flash away.
Click to expand...
Click to collapse
iv been messing with it all day and odin wont see it. any tricks?
Which file to flash?
priyana said:
In that mode (secondary download mode) you should be able to flash if Odin detects.
Sometimes you need to keep trying until suddenly Odin detects it, and flash away.
Click to expand...
Click to collapse
Hi priyana,
I do have the same problem with my Galaxy Tab GT-P1000 and I am getting the same screen.
Did flash my device with Odin but the wrong something cwm10.x , forgot which one I used (well done I know )
It is a Vodafone (Germany) Galaxy Tab 7 (GT-P1000).
May I ask some questions:
What do you mean with "flash it away" what do you suggest him to use for flashing?
What is it? A Recovery? A Bootloader ...? And where can one find/get it?
Stupid questions - I got confused while reading thousands of threads on different websites...
But anyway, I would be thankful if you could point me to the right file I could use to flash on my Galaxy Tab ...
Thanks
Hi Hotstart,
I mean flash a stock ROM in Odin once Odin see the tab.
One good complete ROM is gb-stock-save-v5 that Team Overcome packed together.
Follow my signature.
There is that and a PDF guide, you need the page 7 of it for what to put in Odin.
Not for ruthlessbeatle, as this is for GSM P1000 only.
Sent from my GT-P1000 using xda app-developers app
hotstart said:
Hi priyana,
I do have the same problem with my Galaxy Tab GT-P1000 and I am getting the same screen.
Did flash my device with Odin but the wrong something cwm10.x , forgot which one I used (well done I know )
It is a Vodafone (Germany) Galaxy Tab 7 (GT-P1000).
May I ask some questions:
What do you mean with "flash it away" what do you suggest him to use for flashing?
What is it? A Recovery? A Bootloader ...? And where can one find/get it?
Stupid questions - I got confused while reading thousands of threads on different websites...
But anyway, I would be thankful if you could point me to the right file I could use to flash on my Galaxy Tab ...
Thanks
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=1133590
this helped me a ton i was bricked and now im back kinda of. remember read everything 2 twice if you have to. i could use a hand again though im back to bootlooping at the vzw screen after i used the link above. i wiped after flash but still bootlooping. its not cuz i converted to ext4 because i saw others who had converted and didnt have a problem. any advice on how i get this bad boy to spot boot looping thanks
priyana said:
Hi Hotstart,
I mean flash a stock ROM in Odin once Odin see the tab.
One good complete ROM is gb-stock-save-v5 that Team Overcome packed together.
Follow my signature.
There is that and a PDF guide, you need the page 7 of it for what to put in Odin.
Click to expand...
Click to collapse
Hi priyana,
thank you for your advice!
Currently I am stuck because in the middle of the flashing process the tab switched off maybe due to a low battery.
But is starting with the secondary download screen again - so I am hoping to be able to load it bit better for the next try.
Will let you know whatever outcome there will be.
Cheers
My sister owns this tab, and she wanted me to update its firmware from stock 2.2 (froyo) to 2.3.6 (gingerbread). I followed a guide on youtube, and I downloaded the files provided in the description tab. The flashing went smoothly, but after rebooting, the tab won't get past the samsung logo. Have I killed her tab? If I did, she'd kill me too Please help..
Additional info:
Model: GT-P1000
FCC ID: A3LGTP1000
I think she bought the tab in germany, if so then what firmware should I download?
Is it possible to just download any FW file to use for flashing? If not can anyone please direct me to the proper firmware?
I've been googling for a day..Download 2 firmwares but still no luck.. also tried wiping user data and cache.
Thanks for any help..much appreciated!
You need to restore via Odin first download Odin then head over to this link
http://allkindfile.blogspot.com/2012/07/odin-flasher-and-original-ops-pit-file.html?m=1 scroll down to the bottom and find the Samsung galaxy tab pit for the gt-p1000 after that go to this link http://www.sammobile.com/firmwares/ and search your tablet in the search box and it should say Germany on it download that file. Boit into download mode i believe its voljme down + power. Open Odin and click pit and open the pit file you downloaded. Then click PDA and find the firmware you got from the last link. Then just hit start and you should be good to go
Sent from my SPH-L710 using xda premium
Thank you very much atlast someone replied!
Anyhow i downloaded the pit(s) for my device, but i got 4 pit files, (gt-p1000_mr, pit-909, pit-EUR and pit-p1) which one do i have to use?
Also i already downloaded 2 germany firmwares, one is released 2011, the other 2012. Theyre both at version 2.3.6, should i use them? or do i have to download a 2.2 froyo firmware (you said restore)
I'm really confused, but i'll try them all now. thanks very much!!!!!!
chir0n said:
Thank you very much atlast someone replied!
Anyhow i downloaded the pit(s) for my device, but i got 4 pit files, (gt-p1000_mr, pit-909, pit-EUR and pit-p1) which one do i have to use?
Also i already downloaded 2 germany firmwares, one is released 2011, the other 2012. Theyre both at version 2.3.6, should i use them? or do i have to download a 2.2 froyo firmware (you said restore)
I'm really confused, but i'll try them all now. thanks very much!!!!!!
Click to expand...
Click to collapse
I forgot to mention did you boot into recovery and wipe data and see if you got it to boot? Often times after an update you have to boot into stock recovery and wipe cache and factory reset but if that failes just use the pit gt-p1000 and the firmware I would try froyo then if that fails to work do 2011 then if that don't work try 2012 but always use the pit file if none of these work then it means your internal sdcard gave out. Also before trying all of this try doing a factory reset in recovery and if you get errors post a screenshot of it so I get a better idea of what happened. Hope this helps
EDIT: sorry just read the part where u already did the factory reset and wipe cache was it in stock recovery? And did you get any errors?
Sent from my SPH-L710 using xda premium
Yes i did try factory resetting and wiping off cache data every flash/recovery i do, but it doesnt help. when i reset userdata, it always says that it cannot access "system/csc/via/something", and rfs format failed on /dev/block/stl10. I know i'm doing something wrong and i just cant figure it out because there are thousands of threads here, sticky posts doesn't help..im no techie guy but im trying to deal with the situation with positive thinking.. anyway thanks for the help bud, please bear with me until i fix this off..thank you so much..
chir0n said:
Yes i did try factory resetting and wiping off cache data every flash/recovery i do, but it doesnt help. when i reset userdata, it always says that it cannot access "system/csc/via/something", and rfs format failed on /dev/block/stl10. I know i'm doing something wrong and i just cant figure it out because there are thousands of threads here, sticky posts doesn't help..im no techie guy but im trying to deal with the situation with positive thinking.. anyway thanks for the help bud, please bear with me until i fix this off..thank you so much..
Click to expand...
Click to collapse
Oh I see what happened has this tablet previously been rooted or on a custom ROM? Because normally when on a custom ROM specially with our tablets the partition format changes from rfs to ext4 because its faster and more reliable. That being said what your experiencing is your tablet trying to boot but its not the right format because touch wiz only runs on rfs format. This happened to my tablet too when I tried to restore to stock and all I did was flash the pit and the stock firmware in Odin and it booted right up. Took my tablet about 20 minutes the first time to boot up though but it eventually did.
Sent from my SPH-L710 using xda premium
oh, is that the case? but my sister's tab isnt rooted nor had any custom roms before i flashed it. it was on stock firmware.. would it really take that long (20mins+) for a newly flashed device to boot up? approximately how long would should i keep it stuck at the samsung logo before i quit? im willing to wait hours, just for the tab to work. im gonna flash it again using 2.3.6 gingerbread firmware and a pit file using odin, and gonna let it stand until i wake up later and report the results. thank you so much!
chir0n said:
oh, is that the case? but my sister's tab isnt rooted nor had any custom roms before i flashed it. it was on stock firmware.. would it really take that long (20mins+) for a newly flashed device to boot up? approximately how long would should i keep it stuck at the samsung logo before i quit? im willing to wait hours, just for the tab to work. im gonna flash it again using 2.3.6 gingerbread firmware and a pit file using odin, and gonna let it stand until i wake up later and report the results. thank you so much!
Click to expand...
Click to collapse
I would say wait 20 minutes or just stare at the Samsung logo if it appears to blink and stay at the Samsung logo then your still in a boot loop BTW how did you update the tab? If you did it correctly it should have been just OTA correct? Or did you flash it manually in stock recovery?
Sent from my SPH-L710 using xda premium
jazz995756 said:
I would say wait 20 minutes or just stare at the Samsung logo if it appears to blink and stay at the Samsung logo then your still in a boot loop BTW how did you update the tab? If you did it correctly it should have been just OTA correct? Or did you flash it manually in stock recovery?
Sent from my SPH-L710 using xda premium
Click to expand...
Click to collapse
i flashed it using odin the first time, using a german firmware+pit file i downloaded at sammobile. is that called stock recovery? YES, the samsung logo blinks, so i am in a boot loop now..how can i fix this.. my sister's getting angry now i really need to fix this asap
ps. what is OTA?
chir0n said:
i flashed it using odin the first time, using a german firmware+pit file i downloaded at sammobile. is that called stock recovery? YES, the samsung logo blinks, so i am in a boot loop now..how can i fix this.. my sister's getting angry now i really need to fix this asap
ps. what is OTA?
Click to expand...
Click to collapse
OTA stands for over the air update and well do you still get errors in recovery? And did you flash that pit file with all the other firmwares u had?
Sent from my SPH-L710 using xda premium
i fixed it, finally.
i followed instructions from the Overcome Rom 4.0 tutorials by sos_sifou which is located on the samsung galaxy tab general forum.
first, i downloaded the GB-stock-safe-v5 rom, flash the pda, pit, and the phone modem.bin file. i think what my error really is was i wasn't adding a modem file. after flashing, still i got a couple of errors in recovery mode BUT after it restarted by itself, it booted right away, no 20 minute waiting time. then from there, i was really happy that i managed to fix it but i had gone for a little more. i installed overcome kernel and rom which i was glad i did, its really fast now, and really stable. instructions are easy to follow, you cant miss anything but as pre se, you have to follow everything carefully.
thanks anyway for all the help dude, i wish you also could fix your bricked tab? i read your thread a while back, good luck to you
chir0n said:
i fixed it, finally.
i followed instructions from the Overcome Rom 4.0 tutorials by sos_sifou which is located on the samsung galaxy tab general forum.
first, i downloaded the GB-stock-safe-v5 rom, flash the pda, pit, and the phone modem.bin file. i think what my error really is was i wasn't adding a modem file. after flashing, still i got a couple of errors in recovery mode BUT after it restarted by itself, it booted right away, no 20 minute waiting time. then from there, i was really happy that i managed to fix it but i had gone for a little more. i installed overcome kernel and rom which i was glad i did, its really fast now, and really stable. instructions are easy to follow, you cant miss anything but as pre se, you have to follow everything carefully.
thanks anyway for all the help dude, i wish you also could fix your bricked tab? i read your thread a while back, good luck to you
Click to expand...
Click to collapse
Its still at Samsung they charge me $170 cuz I got a suggestion to flash overcome and I bricked it so I just bought a different one
Sent from my SPH-L710 using xda premium
That is because yours is CDMA tab.
Overcome is for GSM only.
Sent from my GT-P1000 using xda app-developers app
jazz995756 said:
Its still at Samsung they charge me $170 cuz I got a suggestion to flash overcome and I bricked it so I just bought a different one
priyana:
That is because yours is CDMA tab.
Overcome is for GSM only.
Click to expand...
Click to collapse
That's some really bad thing that's gone, anyway if you can afford the $170 then why not? instead of just forsaking the tab away. again thanks for all the help dude, it was my first time flashing android devices, but not nokias. it was different in someway, anyhow just always be cautious of what you do always. please close thread tnx
i need help
chir0n said:
i fixed it, finally.
i followed instructions from the Overcome Rom 4.0 tutorials by sos_sifou which is located on the samsung galaxy tab general forum.
first, i downloaded the GB-stock-safe-v5 rom, flash the pda, pit, and the phone modem.bin file. i think what my error really is was i wasn't adding a modem file. after flashing, still i got a couple of errors in recovery mode BUT after it restarted by itself, it booted right away, no 20 minute waiting time. then from there, i was really happy that i managed to fix it but i had gone for a little more. i installed overcome kernel and rom which i was glad i did, its really fast now, and really stable. instructions are easy to follow, you cant miss anything but as pre se, you have to follow everything carefully.
thanks anyway for all the help dude, i wish you also could fix your bricked tab? i read your thread a while back, good luck to you
Click to expand...
Click to collapse
after years with this tab, i decide to upgrade to ics so i can have bbm installed.
i flashed (root) the device with odin and now i am stuck in boot-loop.
please, where do i start?
---------- Post added at 11:29 PM ---------- Previous post was at 11:28 PM ----------
jazz995756 said:
Its still at Samsung they charge me $170 cuz I got a suggestion to flash overcome and I bricked it so I just bought a different one
Sent from my SPH-L710 using xda premium
Click to expand...
Click to collapse
after years with this tab, i decide to upgrade to ics so i can have bbm installed.
i flashed (root) the device with odin and now i am stuck in boot-loop.
please, where do i start?
---------- Post added at 11:33 PM ---------- Previous post was at 11:29 PM ----------
jazz995756 said:
You need to restore via Odin first download Odin then head over to this link
http://allkindfile.blogspot.com/2012/07/odin-flasher-and-original-ops-pit-file.html?m=1 scroll down to the bottom and find the Samsung galaxy tab pit for the gt-p1000 after that go to this link http://www.sammobile.com/firmwares/ and search your tablet in the search box and it should say Germany on it download that file. Boit into download mode i believe its voljme down + power. Open Odin and click pit and open the pit file you downloaded. Then click PDA and find the firmware you got from the last link. Then just hit start and you should be good to go
Sent from my SPH-L710 using xda premium
Click to expand...
Click to collapse
please can i have the link to the pit file, the link is hosted on hotfile which is now down.
You may want to use the Overcome Method: http://forum.xda-developers.com/showthread.php?t=1881981
Sent from my GT-P1000 using XDA Premium 4 mobile app
tunjicool said:
after years with this tab, i decide to upgrade to ics so i can have bbm installed.
i flashed (root) the device with odin and now i am stuck in boot-loop.
please, where do i start?
---------- Post added at 11:29 PM ---------- Previous post was at 11:28 PM ----------
after years with this tab, i decide to upgrade to ics so i can have bbm installed.
i flashed (root) the device with odin and now i am stuck in boot-loop.
please, where do i start?
---------- Post added at 11:33 PM ---------- Previous post was at 11:29 PM ----------
please can i have the link to the pit file, the link is hosted on hotfile which is now down.
Click to expand...
Click to collapse
Ensure that you flashed a correct ROM for your tablet model, and that you cleared data when you flashed (from recovery).
xz124 said:
Ensure that you flashed a correct ROM for your tablet model, and that you cleared data when you flashed (from recovery).
Click to expand...
Click to collapse
thank you for this reply. though it came a bit late.
the device is dead!!!
if i on it now, it will only on the camera flash light as long as i hold the power button and then off the light when i release the button.
i don't know what to do.
i guess i can still get help on reviving it somehow or else i should start planning the burial .