Database Develop

galaxy tab dead

Well as the title says. My GT has died ..... Fuy to put a rom and I fault the burden of odin rom. Odin gave me FAILED. And where is the blue bar downloding stood. Remove the wire and give the keys and power vol-I got a tablet with a PC and a triangle in the middle. I did a total reset to odin and reloaded and I recognized the table with those marks mentioned and I reloaded. with the same result. I say good because if I load this rom will be posting JM6 say that fixes everything. odin Todal tells me the "reset" and "pass " say COOL! SOLVED. Nothing is further from the truth. I have been on the screen that says "GALAXY Tab" and there does not happen. Try the ROM put him "BROKEN V4"with the same fate .... Probe with the kernel of "overcome " not at all a kernel of MoDaCo for the theme of recovery if the recovery was installed and nothing in odin ... FAIL. The fact is that this might not dead yet it let me access the DOWLOADIG. I think there must be something BOOT.ini. but the ideas are beyond me. if they could resurrect a DHD. but as a tab ... if not with your help I can do little more
install the JM6 and I get the picture but then stays Galay SAMSUNG TAB AND DOWN ... not start see image of odin
sorry for my English but the google translator

Do you have Cwm recovery installed? Tried to clear caches?
send from my SGT with Overcome...

spike1985 said:
Do you have Cwm recovery installed? Tried to clear caches?
send from my SGT with Overcome...
Click to expand...
Click to collapse
No. CWM ..... NOT installed
I'm trying with. md5 and this is pit: P1_add_hidden.pit
but will not start ....
edit: the. cfg not to put it .....

Go to overcome thread and download the guide attached there, read carrefull what inside and you will, probably, fix the problem.
Sent from my GT-P1000 using XDA Premium App

af974 said:
Go to overcome thread and download the guide attached there, read carrefull what inside and you will, probably, fix the problem.
Sent from my GT-P1000 using XDA Premium App
Click to expand...
Click to collapse
Where is the guide?? sorry my bad English and I translate by google ... if you make me so kind as to put the thread .... I give thank you very much

My Tab was once in a state like this with the exclamation mark and picture of the little pc. I believe it's fixable, and I also think that it's actually harder to permanently brick these things than would first seem. I remember I even had an error during repartitioning, surely that would have been curtains but it wasn't.
This was my experience, and in my post I link to another post that contains some useful information on getting out of that error: http://forum.xda-developers.com/showpost.php?p=12719559&postcount=13

Try it like this
Uncheck repartition
Remove the pit file
Do not add anything for the 'Phone' and 'CSC' portion.
Just flash the PDA section.
See if that works.

This is the Dev forum, not questions forum.
Sent from my HTC HD2 using XDA Premium App

http://files.deodexed.com/ModADroid-Galaxy-Tablet/Rotohammer/JME/
Use this link. Download modem file and full file. Then flash with pit in odin. It will work. Same thing happened to me.
As long as you can access downloading screen it's not dead.
Sent from my GT-P1000 using XDA Premium App

This medthod work for me
1. wait until the TAB discharge (about 1 Day)
2. Connect the tab to the computer
3. wait about 10 minutes
4.After boot please start odin
5.open odin and see status connect with odin and selcet pit file from your download
http://www.4shared.com/file/pThcn9Ml/P1000_new_Odin3_v17.html
After flash pit wait a minute your phone will reboot in to recover mode and restart
to samsung logo page
6.Flash roto firmware with ordin ( if can't flash with odin will change to Heimdall_1.1.1
http://files.deodexed.com/ModADroid-Galaxy-Tablet/Rotohammer/KM2/Roto-KM2-Full-v1.zip
7.After finish reboot your phone and boot into roto rom
8.Go to recovery mode
9.Flash customer firmware ( I used Overcome 1.6.4 )

shoman24v said:
Try it like this
Uncheck repartition
Remove the pit file
Do not add anything for the 'Phone' and 'CSC' portion.
Just flash the PDA section.
See if that works.
Click to expand...
Click to collapse
FAIL!!!!!
thanks
I installed the kernel Overcome. this time it gave me failed to install but still no recovery. continues in the same state snif snif snif
all the above steps with "broken", JM6 JME have been nil .... BOOT.ini problem is I think

chemita said:
Where is the guide?? sorry my bad English and I translate by google ... if you make me so kind as to put the thread .... I give thank you very much
Click to expand...
Click to collapse
http://forum.xda-developers.com/attachment.php?attachmentid=585587&d=1304441485

Filgaliel said:
http://forum.xda-developers.com/attachment.php?attachmentid=585587&d=1304441485
Click to expand...
Click to collapse
you mean this part?. @Filgaliel
Please download the following files:  You should download the NEW JMK-stock-safe.zip from the following link: http://www.multiupload.com/U88JTJ4P10 (if you’ve downloaded the JMK-stock-safe.zip prior to 21 April, please download this new version!)
 You should download the Overcome ROM 1.6.4 (Overcome_v1.6.4_Full.zip) file from the following link: http://www.multiupload.com/GYOVUEW9P5
 You should download the Overcome Kernel 2.1.6 (Overcome_Kernel_v2.1.6_OCUV_ODIN.tar) file from the following link: http://forum.xda-developers.com/attachment.php?attachmentid=585421&d=1304425298
 You must have enough space on your internal storage (henceforth referred to as Internal SD, as opposed to the External S) So, please clear some space. A free space of about 4GB should suffice

Yes. Try that. It should work.

Filgaliel said:
Yes. Try that. It should work.
Click to expand...
Click to collapse
Well .... I'll try .... I work 10 pm to 6 am on Wednesday are 5 pm and I still do not sleep for trying to fix

Sorry to hear this, however PLEASE READ THE FORUM RULES AND POST IN THE CORRECT FORUM.
Sigh. I wish I was a moderator.

antiochasylum said:
Sorry to hear this, however PLEASE READ THE FORUM RULES AND POST IN THE CORRECT FORUM.
Sigh. I wish I was a moderator.
Click to expand...
Click to collapse
@antiochasylum I'd like to fix my problem .... I think this in the right forum or not is a bad rom flash?? Not everyone is as smart as you

TheATHEiST said:
This is the Dev forum, not questions forum.
Sent from my HTC HD2 using XDA Premium App
Click to expand...
Click to collapse
It is SO COOL to have you policing the forums! I don't know what we would do without your valuable and always helpful input.
I am sure XDA would be a post-apocalyptic wasteland of massive proportions were it not for you being the glue holding it all together.
So THANK YOU.

antiochasylum said:
Sigh. I wish I was a moderator.
Click to expand...
Click to collapse
You´re not.

now **** out now and does not charge the battery .... uuuuffff amount a circus and I grow dwarf

Flickering screen while flashing via ODIN

Any help with this? I rooted & installed CWM on my Wildfire with no issues, but it seems like this phone's a tough nut. Can't start it up now, screen keeps flickering if I try to turn it on, don't think it can even boot up.
Your prompt reply is much appreciated!

Serenadier said:
Any help with this? I rooted & installed CWM on my Wildfire with no issues, but it seems like this phone's a tough nut. Can't start it up now, screen keeps flickering if I try to turn it on, don't think it can even boot up.
Your prompt reply is much appreciated!
Click to expand...
Click to collapse
Wildfire wrong section, this mini thread

apisfires said:
Wildfire wrong section, this mini thread
Click to expand...
Click to collapse
I mean I've done it before on my Wildfire, but there's a problem with this on the Galaxy Mini. Problem phone in question is the Galaxy Mini now.
Sorry for the misunderstanding.. any help you can offer me?

installed from where and how?

kandros said:
installed from where and how?
Click to expand...
Click to collapse
Okay so first I downloaded the OPS, Gingerbread firmware and ODIN. Then I installed Kies for drivers, and then I opened ODIN, inserted the OPS and Gingerbread firmware file, started the process.
Somehow when it came to the reboot part, the phone just kept rebooting (screen lights up, turns off, pause, repeats again) and it hasn't worked since.
Then now there's an error with setup connection which presumably has something to do with the drivers, so I reinstalled it but now setup connection keeps occurring...

Okay, now, I tried doing the whole process again... I'm stuck at 'Close serial port and wait until rebooting' as the phone constantly flickers on and off repeatedly with no sign of anything going on.
Somebody please help :/

Still the same?
Firmware from Sammobile.com?
Wait...prob is while installing cwm or GB?

Are you using the right version of odin,i think it's 4.31...?
Sent from my GT-S5570 using XDA App

Small_town_boy said:
Are you using the right version of odin,i think it's 4.31...?
Sent from my GT-S5570 using XDA App
Click to expand...
Click to collapse
Yup, 4.31, TASS v1.0 as OPS. S5570DXKPD_S5570OLBKPD for the firmware.
Problem now is I think the flashing works.. but somehow, the phone is somehow corrupt in a way that boot is not possible - nothing's possible except download mode.
I haven't played around with Samsungs, mostly HTCs so this is uncharted territory for me.
roofrider said:
Still the same?
Firmware from Sammobile.com?
Wait...prob is while installing cwm or GB?
Click to expand...
Click to collapse
Yup, firmware from Sammobile.com. Problem is while installing GB. Will trying to install CWM first at least alleviate some of the problem?
In fact... I can't even boot into the original recovery. All that happens is the phone boots... and goes into an insane loop. Can't do anything else other than that.
Thanks guys..

download again the firmware Nd retry.. till downloading mode works you are safe.. in general section FAQ post there is link and guide
Sent from my GT-S5570 using Tapatalk

Serenadier said:
Yup, 4.31, TASS v1.0 as OPS. S5570DXKPD_S5570OLBKPD for the firmware.
Problem now is I think the flashing works.. but somehow, the phone is somehow corrupt in a way that boot is not possible - nothing's possible except download mode.
I haven't played around with Samsungs, mostly HTCs so this is uncharted territory for me.
Yup, firmware from Sammobile.com. Problem is while installing GB. Will trying to install CWM first at least alleviate some of the problem?
In fact... I can't even boot into the original recovery. All that happens is the phone boots... and goes into an insane loop. Can't do anything else other than that.
Thanks guys..
Click to expand...
Click to collapse
list full name file you downloaded
1?
2?
3?
sometime, the name is wrong

Fixed?
Try flashing a multi package 2.3.x file if the latest is a one package...
Btw are u Latin and using a Latin version?

kandros said:
download again the firmware Nd retry.. till downloading mode works you are safe.. in general section FAQ post there is link and guide
Sent from my GT-S5570 using Tapatalk
Click to expand...
Click to collapse
Even when the firmware is being flashed, the screen constantly flashes on and off. Is this normal?
I'd try that, but I don't know if it would work...

roofrider said:
Fixed?
Try flashing a multi package 2.3.x file if the latest is a one package...
Btw are u Latin and using a Latin version?
Click to expand...
Click to collapse
I'm on Asia version, I downloaded a 2.3.4 Asian version too.
apisfires said:
list full name file you downloaded
1?
2?
3?
sometime, the name is wrong
Click to expand...
Click to collapse
1. From ODIN 4.38 + Tass.Ops.rar -
a. Tass_V1.0.ops
b. S5570_Odin Multi Downloader v4.38.exe
2. S5570DXKPD_S5570OLBKPD.zip
I don't think it's wrong, is it...?

Check for Tass_ops file sometimes it might be a possibility that ur using a wrong one.

dkn91 said:
Check for Tass_ops file sometimes it might be a possibility that ur using a wrong one.
Click to expand...
Click to collapse
I downloaded everything again from the Gingerbread update thread, redid everything as instructions... the phone is still in a really fast bootloop.

Serenadier said:
I downloaded everything again from the Gingerbread update thread, redid everything as instructions... the phone is still in a really fast bootloop.
Click to expand...
Click to collapse
Try flashing a 2.3.3 multi package firmware

roofrider said:
Try flashing a 2.3.3 multi package firmware
Click to expand...
Click to collapse
Doing that right away.
Is it normal for the phone to flicker on and off during the flash process, and after the flash process is complete, with ODIN showing PASS?

Okay, so installing a multi package firmware didn't work either. Now what. )': at wit's end here.

It won't flicker.
And when it's done it'll show pass.
While in download mode, Odin shows connected rite? A yellow box Appears?

[Q] P1000 Brick

Sorry for the long thread but please read and help me !
Sorry moderators i tried looking for my post didnt find where you placed it. so making a new and clear where i'll tell what i ve done to my tablet.
firstly my p1000 was froyo 2.2 and i didnt checked that and tried to upgrade it to jelly bean, that was the first stupidity of my.
while doing that i faced many problems and concluded that it was brick.
how ever i had rooted my phone with super one click root..
later when it was bricked i again rooted it with cwm recovery by help of cmd.
then it was more complex, i then tried to roll it back and installed the firmware but the firmware i installed was wrong region again it went more complex.
then from some thread, i again used odin and pit it and installed some other firmware. that didnt work so i did something with heimdall suite as it was instructed and mess something with zImage thing.. all failed.
now i ve finally came up with no solution and thinking what the mess i ve done.
please help me.
now odin dont recognize the phone.
the phone is booting till the samsung welcome screen i can also listen the sound.
it also goes to cwm recovery screen and also goes to downloading screen.
please tell me a way so that it can go to normal i am happy with 2.2 froyo only.
tell me a way, please give me download links so that i dont mess it again.
remember odin not accepting it, i ve charged the phone fully and also installed the samsung usb drivers but its not helping..

Follow the link in my signature.
Download the guide and gb stock safe.
Jump to page 7.
Go to download mode. Connect cable. Start Odin.
You may want to remove zadig/heimdall if possible.
Better if you can get a clean PC and install driver from gb stock safe.
Sent from my GT-P1000 using xda app-developers app

yes, i am sure it is because of heimdall suite,..
thanks a lot you are so helping i will be posting here only now

Your post was within another thread two from the top of this forum with you as the last poster but don't worry any more. As you've now created a new thread which is much clearer I've deleted the other posts so that all your questions and can answers on this subject can be kept together here.
Thanks
AvRS

AvRS said:
Your post was within another thread two from the top of this forum with you as the last poster but don't worry any more. As you've now created a new thread which is much clearer I've deleted the other posts so that all your questions and can answers on this subject can be kept together here.
Thanks
AvRS
Click to expand...
Click to collapse
i am really really sorry for all the inconvenience ,
i was a bit shocked as my tablet got bricked, so made such silly posts and created the problems.
but thanks for understanding my conditions.

priyana said:
Follow the link in my signature.
Download the guide and gb stock safe.
Jump to page 7.
Go to download mode. Connect cable. Start Odin.
You may want to remove zadig/heimdall if possible.
Better if you can get a clean PC and install driver from gb stock safe.
Sent from my GT-P1000 using xda app-developers app
Click to expand...
Click to collapse
i would like to give you a big big big thanks for helping me out..
this forum is the best forum over the web as i got my problem solved,
not only helped me to unbrick my tablet but also now its upgraded to 4.1 jelly beans.
Priyana without you my tablet would be ended with a hard brick.
Thanks a lot.

No network !!
after all the hard work and all flashing thing, i upgraded it to Android 4.1.1 Jelly Bean via CyanogenMod 10
but now the problem is i cant find the network ..

Are-you talking about wifi? If so, check this thread: http://forum.xda-developers.com/showthread.php?t=1874634&highlight=modem+bin

glussier said:
Are-you talking about wifi? If so, check this thread: http://forum.xda-developers.com/showthread.php?t=1874634&highlight=modem+bin
Click to expand...
Click to collapse
i am sorry for not being clear, i was talking about the mobile network.
i searched on forum, and what i understand is i have to copy modem.bin file to data/vendor.
but i dont know which modem file to copy.

You can extract modem.bin from the rom that you have downloaded.

uryv
glussier said:
You can extract modem.bin from the rom that you have downloaded.
Click to expand...
Click to collapse
i did that... but still not able to make any calls. my sim card is working on other phone though.
have tried flashing modem.bin and also tried copy and paste in vendor folder.
but its not working searching all over the forum but i dont know what to do

Settings>about tablet>Status> Service state : out of service / Mobile network state : disconnected / MDN : unknown

Where did you get the modem.bin from and which network you belong to.
I recommend starting by looking at gb stock safe, when you unpack there are a few modem.bin
Start with JPZ modem and stick it in /radio/ if latest cm10
Or to /system/vendor for slightly older one.
Sent from my GT-I9300 using xda app-developers app

priyana said:
Where did you get the modem.bin from and which network you belong to.
I recommend starting by looking at gb stock safe, when you unpack there are a few modem.bin
Start with JPZ modem and stick it in /radio/ if latest cm10
Or to /system/vendor for slightly older one.
Sent from my GT-I9300 using xda app-developers app
Click to expand...
Click to collapse
in gb stock safe, it was jpz modem file.. which i used to flash and it was flashed very well and there was no problem in anything.
later on when i upgraded for 4.1.1 it was also installed normally with no problem the only problem i encountered is i cant make any calls from it.
even the imei number is changed of my phone.
i also sticked the file in system/vendor .. i tried with the both file the jpz which i had from gb stock file and another from the firmware.
well now i trying to go for the latest cyanogen 4.1.1 hope everything get normal in it, and try to stick file in radio.
can you tell me particularly which file to copy and where ?
in gb stock jpz worked fine.. should i go for it ?

yes the same jpz modem.bin file into /radio/modem.bin
the one in the CM10 might be corrupted, who knows.

priyana said:
yes the same jpz modem.bin file into /radio/modem.bin
the one in the CM10 might be corrupted, who knows.
Click to expand...
Click to collapse
hmm yea you were right.. and it was stupid of me i was using a old version cyanogen.. it downloaded the latest nightly and it worked fine..
but i think something google apps that.. the apps are limited as earlier i used to keep on scrolling and the apps list was like infinite now it seems as there are just 200 apps in it..
give me a link of latest gapps file plzz

Gapps only a few apps in it.
http://goo.im/gapps
Choose correctly, ics or jb.
Sent from my GT-P1000 using xda app-developers app

[Q] Flash Stock ROM on S5830

hi,
My friend actually flashed ICS zip using the default recovery present in our phones ( vol up+power+home) . The phone is now stuck at samsung logo. I tried flashing Via ODIN with some PDAs but the phone is not getting flashed. odin stuck at Establishing connection when we press start flashing on odin.
What do I do now? Phone goes to download mode. please help!

Download the proper firmware of your region and try again..

KranTi said:
Download the proper firmware of your region and try again..
Click to expand...
Click to collapse
are there separate pit,bootloader and PDA,modem files ? the way how they are for Galaxy SL i9003

Watch this video,and it will help you to go back to stock
http://www.youtube.com/watch?v=dMVP2IDk2sU

It'd be great if you would ask in the help thread instead of creating a new thread. Nothing wrong with this, just it would be better in there
For your question, download the firmware for your region and flash it via odin and see if its a one package or not..

King ACE said:
It'd be great if you would ask in the help thread instead of creating a new thread. Nothing wrong with this, just it would be better in there
For your question, download the firmware for your region and flash it via odin and see if its a one package or not..
Click to expand...
Click to collapse
sorry but i thought Q and A thread would be correct choice. If I posted wrong place very sorry but i can't move it now .. next time onward i will take care. But this is how I used to do it SL forums. sorry again

No, the section is proper lol...just check at the top 5-6 threads there's a Help thread... You're posting exactly where you ought to :good:
Lol and there is no harm in creating a new thread, but it'd be better if you posted it in the existing help thread!

Please help me

So im lost. I flashed the wrong rom and bricked my vzw tab. First time iv ever bricked any device unfortunately. How do i fix it? Odin? Im not boot looping and i cant get into recovery but i believe i can get into download mode. And advice and id be very thankful. Or do i have a new paperweight
Sent from my LG-LS970 using xda app-developers app

Odin/heimdall flash stock rom in download mode should take care of it.
Sent from my GT-P1000 using xda app-developers app

Thanks im.stressed because its not charging...that okay to odin on low batt
Sent from my LG-LS970 using xda app-developers app

so im working on this today and i cant get into download mode. i only see the phone and a computer with a orange triangle in the middle. i saw a video of how to fix it but i couldnt download the files. can anyone please point me to the right thread.

In that mode (secondary download mode) you should be able to flash if Odin detects.
Sometimes you need to keep trying until suddenly Odin detects it, and flash away.

priyana said:
In that mode (secondary download mode) you should be able to flash if Odin detects.
Sometimes you need to keep trying until suddenly Odin detects it, and flash away.
Click to expand...
Click to collapse
iv been messing with it all day and odin wont see it. any tricks?

Which file to flash?
priyana said:
In that mode (secondary download mode) you should be able to flash if Odin detects.
Sometimes you need to keep trying until suddenly Odin detects it, and flash away.
Click to expand...
Click to collapse
Hi priyana,
I do have the same problem with my Galaxy Tab GT-P1000 and I am getting the same screen.
Did flash my device with Odin but the wrong something cwm10.x , forgot which one I used (well done I know )
It is a Vodafone (Germany) Galaxy Tab 7 (GT-P1000).
May I ask some questions:
What do you mean with "flash it away" what do you suggest him to use for flashing?
What is it? A Recovery? A Bootloader ...? And where can one find/get it?
Stupid questions - I got confused while reading thousands of threads on different websites...
But anyway, I would be thankful if you could point me to the right file I could use to flash on my Galaxy Tab ...
Thanks

Hi Hotstart,
I mean flash a stock ROM in Odin once Odin see the tab.
One good complete ROM is gb-stock-save-v5 that Team Overcome packed together.
Follow my signature.
There is that and a PDF guide, you need the page 7 of it for what to put in Odin.
Not for ruthlessbeatle, as this is for GSM P1000 only.
Sent from my GT-P1000 using xda app-developers app

hotstart said:
Hi priyana,
I do have the same problem with my Galaxy Tab GT-P1000 and I am getting the same screen.
Did flash my device with Odin but the wrong something cwm10.x , forgot which one I used (well done I know )
It is a Vodafone (Germany) Galaxy Tab 7 (GT-P1000).
May I ask some questions:
What do you mean with "flash it away" what do you suggest him to use for flashing?
What is it? A Recovery? A Bootloader ...? And where can one find/get it?
Stupid questions - I got confused while reading thousands of threads on different websites...
But anyway, I would be thankful if you could point me to the right file I could use to flash on my Galaxy Tab ...
Thanks
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=1133590
this helped me a ton i was bricked and now im back kinda of. remember read everything 2 twice if you have to. i could use a hand again though im back to bootlooping at the vzw screen after i used the link above. i wiped after flash but still bootlooping. its not cuz i converted to ext4 because i saw others who had converted and didnt have a problem. any advice on how i get this bad boy to spot boot looping thanks

priyana said:
Hi Hotstart,
I mean flash a stock ROM in Odin once Odin see the tab.
One good complete ROM is gb-stock-save-v5 that Team Overcome packed together.
Follow my signature.
There is that and a PDF guide, you need the page 7 of it for what to put in Odin.
Click to expand...
Click to collapse
Hi priyana,
thank you for your advice!
Currently I am stuck because in the middle of the flashing process the tab switched off maybe due to a low battery.
But is starting with the secondary download screen again - so I am hoping to be able to load it bit better for the next try.
Will let you know whatever outcome there will be.
Cheers