Database Develop

[Q] GB 2.3.3. Horizontal lines on boot after patching bootloader. Recovery mode lost

Hi,
I flashed GB 2.3.3 (CF-ROOT 3.3) when it first came up and everything worked fine. Today I decided to check my bootloader. I installed the patch and applied it because the application said: SIGNED. When I rebooted the tab, here is what happened:
A lot of horizontal lines (green, blue, white....etc) -----> then samsung logo appeared -----> then horizontal lines again ---> then the tab main screen appeared.
The tab works fine and now the patch said "YOU ARE SAFE".
I noticed that I lost the recovery mode. ie. When I go to CWM manager ---> Recovery ---> Reboot into ClockWorkMod recovery, the tab gets stuck on samsung logo with these horizontal lines. (Same thing with Power on + Volume up )
What Should I do please ? Flash again 2.3.3 ?
Thanks in advanced.

Problem resolved. Reflashed 2.3.3 again.
Sorry to bother.
Sent from my GT-P1000 using XDA Premium App

DO NOT I REPEAT DO NOT DO THAT AGAIN. Flashing bootloader is practically the only way to BRICK the tab beyond repair except by sending to samsung. What you did btw was downgrade the bootloaders of your tab which is an extremely risky business.
THE GB bootloaders are signed yes but are not secured and they are needed for GB to boot making that patch pointless since kernels and mods can be installed whether bootloaders are signed or not.

Try not to flash bootloader. But some kernels will distort the boot screen. CM7 an to MoDaCo kernels for example for this, but it's nothing to worry about.
| Don't Revive Me Bro! |

DarkPal said:
DO NOT I REPEAT DO NOT DO THAT AGAIN. Flashing bootloader is practically the only way to BRICK the tab beyond repair except by sending to samsung. What you did btw was downgrade the bootloaders of your tab which is an extremely risky business.
THE GB bootloaders are signed yes but are not secured and they are needed for GB to boot making that patch pointless since kernels and mods can be installed whether bootloaders are signed or not.
Click to expand...
Click to collapse
Darkpal,
It's working fine now. I got confused with Overcome 2 installation guide where it says to check bootloader and apply the patch.
Am I safe now?
Sent from my GT-P1000 using XDA Premium App

GANJDROID said:
Try not to flash bootloader. But some kernels will distort the boot screen. CM7 an to MoDaCo kernels for example for this, but it's nothing to worry about.
| Don't Revive Me Bro! |
Click to expand...
Click to collapse
Thanks man. I think I'm fine now
Sent from my GT-P1000 using XDA Premium App

Hi tupo05
i did the same thing.
How did you re-flash?
My Pc (ODIN) doesn`t find the Tab so how should i be able to reflash?
Thanks

GoloTab said:
Hi tupo05
i did the same thing.
How did you re-flash?
My Pc (ODIN) doesn`t find the Tab so how should i be able to reflash?
Thanks
Click to expand...
Click to collapse
Hi,
In my case, i was able to go to download mode and therefore the tab was recognized in Odin. So I just re-flashed 2.3.3 again following Chainfire thread in the Dev section.
SGT Running Overcome 2.0.0 RC1

Hi
Thank you so much. My Tab is running again :-D.
Which Overcome How-To do you use?
Thanks again

GoloTab said:
Hi tupo05
i did the same thing.
How did you re-flash?
My Pc (ODIN) doesn`t find the Tab so how should i be able to reflash?
Thanks
Click to expand...
Click to collapse
I noticed that sometimes I had to go in the PC device manager and delete the drivers for the tab and let Win 7 find and load them again, and as soon as that's done ODIN finds the tab and I was able to reflash. I "soft bricked" my tab about 6 times trying different ROM's and Kernals, and even an app or two. I found this practice of deleting and reloading the drivers the only way to save the tab.

GoloTab said:
Hi
Thank you so much. My Tab is running again :-D.
Which Overcome How-To do you use?
Thanks again
Click to expand...
Click to collapse
Golotab,
I'm happy you're up and running again. For Overcome, just follow these instructions http://forum.xda-developers.com/showthread.php?t=1074759
it's very easy. Just don't patch the bootloader because you are already on 2.3.3
Good luck

hi
I would like to know how to fix this problem? I having same problem.

same prob with p1000n
have the same problem with my sgt p100n crashed colors i tried many roms with the same problem , nd i didn't patch my bootloaders any ideas?

tupo05 said:
Golotab,
I'm happy you're up and running again. For Overcome, just follow these instructions http://forum.xda-developers.com/showthread.php?t=1074759
it's very easy. Just don't patch the bootloader because you are already on 2.3.3
Good luck
Click to expand...
Click to collapse
Hi, I am facing the same situation. I just hope someone can clarify for me.
Instead of refresh 2.3.3 back, can I just follow the line (quoted) for OVERCOME??
After Overcome, can I flash MIUI ROM???
Thanks in advance.

de15april said:
Hi, I am facing the same situation. I just hope someone can clarify for me.
Instead of refresh 2.3.3 back, can I just follow the line (quoted) for OVERCOME??
After Overcome, can I flash MIUI ROM???
Thanks in advance.
Click to expand...
Click to collapse
Yes you can. Restock then flash overcome.
If you are already on overcome, you can flash Miui on the top (because you are already on ext4 system)
I hope that helps
Sent from my GT-P1000 using xda premium

Problem with flashing XWHTH/XWKT9

I sent it into warranty because I removed the data cable while it was flashing (Odin Multi Downloader (Android) was writing in the black box and it was stuck at MIBIB)
It had 2.3.6 XWHTH/XWKT4 installed.
When I recieved it I noticed it has 2.2.1 XXKB1/XWKA8. When connected to ODIN, it detects it, it adds it but in the black box mentioned above is still Odin Multi Downloader (Android)
I am afraid to start the update because .. you know.. I don't wanna send it again 300 miles away from here.
Is it safe to proceed?
ODIN v4.38
Tass v.1.0
.tar/.md5 file OK
:angel:

why not use the Odin created for galaxy mini which show gt-s5570

... Can you explain me.. A little more.. Like a link or something? :/
Sent from my GT-S5570 using xda app-developers app

I guess this Tutorial (http://forum.xda-developers.com/showthread.php?t=1255305) should be fair enough.
Follow the steps as mentioned there, with your current downloaded firmware.

coolsandie said:
I guess this Tutorial (http://forum.xda-developers.com/showthread.php?t=1255305) should be fair enough.
Follow the steps as mentioned there, with your current downloaded firmware.
Click to expand...
Click to collapse
Well... This is happening on my screen, it is the same like when the update failed.
I just want to know If I will not wreck my phone if I go with it.
www.flickr.com/photos/[email protected]3/7703931556/

Ginga:| said:
Well... This is happening on my screen, it is the same like when the update failed.
I just want to know If I will not wreck my phone if I go with it.
www.flickr.com/photos/[email protected]/7703931556/
Click to expand...
Click to collapse
I guess it fine, whether it shows Android or GT-S5570 (happened to me at times) Just use Tass_v1.0.ops and the one package system, your screenshot looks fine.
Just check whether your downloaded firmware is good, just try extracting.
Even I got the same error that you've mentioned in your first post, that MIBIB error message. Just try again. If it doesn't work download another version and try flashing it.
EDIT: Probably you won't brick your device because Odin will not flash the firmware past that MIBIB error.

[Q] P1000 Brick

Sorry for the long thread but please read and help me !
Sorry moderators i tried looking for my post didnt find where you placed it. so making a new and clear where i'll tell what i ve done to my tablet.
firstly my p1000 was froyo 2.2 and i didnt checked that and tried to upgrade it to jelly bean, that was the first stupidity of my.
while doing that i faced many problems and concluded that it was brick.
how ever i had rooted my phone with super one click root..
later when it was bricked i again rooted it with cwm recovery by help of cmd.
then it was more complex, i then tried to roll it back and installed the firmware but the firmware i installed was wrong region again it went more complex.
then from some thread, i again used odin and pit it and installed some other firmware. that didnt work so i did something with heimdall suite as it was instructed and mess something with zImage thing.. all failed.
now i ve finally came up with no solution and thinking what the mess i ve done.
please help me.
now odin dont recognize the phone.
the phone is booting till the samsung welcome screen i can also listen the sound.
it also goes to cwm recovery screen and also goes to downloading screen.
please tell me a way so that it can go to normal i am happy with 2.2 froyo only.
tell me a way, please give me download links so that i dont mess it again.
remember odin not accepting it, i ve charged the phone fully and also installed the samsung usb drivers but its not helping..

Follow the link in my signature.
Download the guide and gb stock safe.
Jump to page 7.
Go to download mode. Connect cable. Start Odin.
You may want to remove zadig/heimdall if possible.
Better if you can get a clean PC and install driver from gb stock safe.
Sent from my GT-P1000 using xda app-developers app

yes, i am sure it is because of heimdall suite,..
thanks a lot you are so helping i will be posting here only now

Your post was within another thread two from the top of this forum with you as the last poster but don't worry any more. As you've now created a new thread which is much clearer I've deleted the other posts so that all your questions and can answers on this subject can be kept together here.
Thanks
AvRS

AvRS said:
Your post was within another thread two from the top of this forum with you as the last poster but don't worry any more. As you've now created a new thread which is much clearer I've deleted the other posts so that all your questions and can answers on this subject can be kept together here.
Thanks
AvRS
Click to expand...
Click to collapse
i am really really sorry for all the inconvenience ,
i was a bit shocked as my tablet got bricked, so made such silly posts and created the problems.
but thanks for understanding my conditions.

priyana said:
Follow the link in my signature.
Download the guide and gb stock safe.
Jump to page 7.
Go to download mode. Connect cable. Start Odin.
You may want to remove zadig/heimdall if possible.
Better if you can get a clean PC and install driver from gb stock safe.
Sent from my GT-P1000 using xda app-developers app
Click to expand...
Click to collapse
i would like to give you a big big big thanks for helping me out..
this forum is the best forum over the web as i got my problem solved,
not only helped me to unbrick my tablet but also now its upgraded to 4.1 jelly beans.
Priyana without you my tablet would be ended with a hard brick.
Thanks a lot.

No network !!
after all the hard work and all flashing thing, i upgraded it to Android 4.1.1 Jelly Bean via CyanogenMod 10
but now the problem is i cant find the network ..

Are-you talking about wifi? If so, check this thread: http://forum.xda-developers.com/showthread.php?t=1874634&highlight=modem+bin

glussier said:
Are-you talking about wifi? If so, check this thread: http://forum.xda-developers.com/showthread.php?t=1874634&highlight=modem+bin
Click to expand...
Click to collapse
i am sorry for not being clear, i was talking about the mobile network.
i searched on forum, and what i understand is i have to copy modem.bin file to data/vendor.
but i dont know which modem file to copy.

You can extract modem.bin from the rom that you have downloaded.

uryv
glussier said:
You can extract modem.bin from the rom that you have downloaded.
Click to expand...
Click to collapse
i did that... but still not able to make any calls. my sim card is working on other phone though.
have tried flashing modem.bin and also tried copy and paste in vendor folder.
but its not working searching all over the forum but i dont know what to do

Settings>about tablet>Status> Service state : out of service / Mobile network state : disconnected / MDN : unknown

Where did you get the modem.bin from and which network you belong to.
I recommend starting by looking at gb stock safe, when you unpack there are a few modem.bin
Start with JPZ modem and stick it in /radio/ if latest cm10
Or to /system/vendor for slightly older one.
Sent from my GT-I9300 using xda app-developers app

priyana said:
Where did you get the modem.bin from and which network you belong to.
I recommend starting by looking at gb stock safe, when you unpack there are a few modem.bin
Start with JPZ modem and stick it in /radio/ if latest cm10
Or to /system/vendor for slightly older one.
Sent from my GT-I9300 using xda app-developers app
Click to expand...
Click to collapse
in gb stock safe, it was jpz modem file.. which i used to flash and it was flashed very well and there was no problem in anything.
later on when i upgraded for 4.1.1 it was also installed normally with no problem the only problem i encountered is i cant make any calls from it.
even the imei number is changed of my phone.
i also sticked the file in system/vendor .. i tried with the both file the jpz which i had from gb stock file and another from the firmware.
well now i trying to go for the latest cyanogen 4.1.1 hope everything get normal in it, and try to stick file in radio.
can you tell me particularly which file to copy and where ?
in gb stock jpz worked fine.. should i go for it ?

yes the same jpz modem.bin file into /radio/modem.bin
the one in the CM10 might be corrupted, who knows.

priyana said:
yes the same jpz modem.bin file into /radio/modem.bin
the one in the CM10 might be corrupted, who knows.
Click to expand...
Click to collapse
hmm yea you were right.. and it was stupid of me i was using a old version cyanogen.. it downloaded the latest nightly and it worked fine..
but i think something google apps that.. the apps are limited as earlier i used to keep on scrolling and the apps list was like infinite now it seems as there are just 200 apps in it..
give me a link of latest gapps file plzz

Gapps only a few apps in it.
http://goo.im/gapps
Choose correctly, ics or jb.
Sent from my GT-P1000 using xda app-developers app

[Q]

I tried to root my phone with this stupid fking website and after i did what the lamo said my phone got stuck at the SAMSUNG GALAXY NOTE GT-N700 with the yello triangle under it
it goes into download mode but thats all.. how can i fix this back to normal.. and can you show me how to root it the RIGHT way ???

Scarfaced4 said:
I tried to root my phone with this stupid fking website and after i did what the lamo said my phone got stuck at the SAMSUNG GALAXY NOTE GT-N700 with the yello triangle under it
it goes into download mode but thats all.. how can i fix this back to normal.. and can you show me how to root it the RIGHT way ???
Click to expand...
Click to collapse
If you are feeling this a stupid site,then why are you asking here to help you solve the problem
You might have done it in a wrong way and blaming the site
And rooting procedure varies from rom to rom
You could find all stock roms here
http://forum.xda-developers.com/showthread.php?t=1424997
Download a rom(better a gb rom) and flash it using pc odin
This is the rooting guide
http://forum.xda-developers.com/showthread.php?t=1329360

Just download any stock gb via guide above, then flash with pc Odin in the pda section whilst in download mode (Vol down, Power and home).
Sent from my GT-N7000 using xda premium

[email protected]$3K#@R said:
If you are feeling this a stupid site,then why are you asking here to help you solve the problem
You might have done it in a wrong way and blaming the site
And rooting procedure varies from rom to rom
You could find all stock roms here
http://forum.xda-developers.com/showthread.php?t=1424997
Download a rom(better a gb rom) and flash it using pc odin
This is the rooting guide
http://forum.xda-developers.com/showthread.php?t=1329360
Click to expand...
Click to collapse
+1 and after that use triangle away to remove the yellow triangle... Be polite.. Calling stupid to this site its calling stupid to everyone here.. And hey who's the stupid? You messing up with your device with not enough knowledge to do so or we whom change roms and root devices and help others everyday like changing underwear
Tapatalking on my n7000

msedek said:
+1 and after that use triangle away to remove the yellow triangle... Be polite.. Calling stupid to this site its calling stupid to everyone here.. And hey who's the stupid? You messing up with your device with not enough knowledge to do so or we whom change roms and root devices and help others everyday like changing underwear
Tapatalking on my n7000
Click to expand...
Click to collapse
Not sure he was calling xda stupid...
Sent from my GT-N7000 using xda premium

[Q] Tab stuck on samsung logo after flashing, need help

My sister owns this tab, and she wanted me to update its firmware from stock 2.2 (froyo) to 2.3.6 (gingerbread). I followed a guide on youtube, and I downloaded the files provided in the description tab. The flashing went smoothly, but after rebooting, the tab won't get past the samsung logo. Have I killed her tab? If I did, she'd kill me too Please help..
Additional info:
Model: GT-P1000
FCC ID: A3LGTP1000
I think she bought the tab in germany, if so then what firmware should I download?
Is it possible to just download any FW file to use for flashing? If not can anyone please direct me to the proper firmware?
I've been googling for a day..Download 2 firmwares but still no luck.. also tried wiping user data and cache.
Thanks for any help..much appreciated!

You need to restore via Odin first download Odin then head over to this link
http://allkindfile.blogspot.com/2012/07/odin-flasher-and-original-ops-pit-file.html?m=1 scroll down to the bottom and find the Samsung galaxy tab pit for the gt-p1000 after that go to this link http://www.sammobile.com/firmwares/ and search your tablet in the search box and it should say Germany on it download that file. Boit into download mode i believe its voljme down + power. Open Odin and click pit and open the pit file you downloaded. Then click PDA and find the firmware you got from the last link. Then just hit start and you should be good to go
Sent from my SPH-L710 using xda premium

Thank you very much atlast someone replied!
Anyhow i downloaded the pit(s) for my device, but i got 4 pit files, (gt-p1000_mr, pit-909, pit-EUR and pit-p1) which one do i have to use?
Also i already downloaded 2 germany firmwares, one is released 2011, the other 2012. Theyre both at version 2.3.6, should i use them? or do i have to download a 2.2 froyo firmware (you said restore)
I'm really confused, but i'll try them all now. thanks very much!!!!!!

chir0n said:
Thank you very much atlast someone replied!
Anyhow i downloaded the pit(s) for my device, but i got 4 pit files, (gt-p1000_mr, pit-909, pit-EUR and pit-p1) which one do i have to use?
Also i already downloaded 2 germany firmwares, one is released 2011, the other 2012. Theyre both at version 2.3.6, should i use them? or do i have to download a 2.2 froyo firmware (you said restore)
I'm really confused, but i'll try them all now. thanks very much!!!!!!
Click to expand...
Click to collapse
I forgot to mention did you boot into recovery and wipe data and see if you got it to boot? Often times after an update you have to boot into stock recovery and wipe cache and factory reset but if that failes just use the pit gt-p1000 and the firmware I would try froyo then if that fails to work do 2011 then if that don't work try 2012 but always use the pit file if none of these work then it means your internal sdcard gave out. Also before trying all of this try doing a factory reset in recovery and if you get errors post a screenshot of it so I get a better idea of what happened. Hope this helps
EDIT: sorry just read the part where u already did the factory reset and wipe cache was it in stock recovery? And did you get any errors?
Sent from my SPH-L710 using xda premium

Yes i did try factory resetting and wiping off cache data every flash/recovery i do, but it doesnt help. when i reset userdata, it always says that it cannot access "system/csc/via/something", and rfs format failed on /dev/block/stl10. I know i'm doing something wrong and i just cant figure it out because there are thousands of threads here, sticky posts doesn't help..im no techie guy but im trying to deal with the situation with positive thinking.. anyway thanks for the help bud, please bear with me until i fix this off..thank you so much..

chir0n said:
Yes i did try factory resetting and wiping off cache data every flash/recovery i do, but it doesnt help. when i reset userdata, it always says that it cannot access "system/csc/via/something", and rfs format failed on /dev/block/stl10. I know i'm doing something wrong and i just cant figure it out because there are thousands of threads here, sticky posts doesn't help..im no techie guy but im trying to deal with the situation with positive thinking.. anyway thanks for the help bud, please bear with me until i fix this off..thank you so much..
Click to expand...
Click to collapse
Oh I see what happened has this tablet previously been rooted or on a custom ROM? Because normally when on a custom ROM specially with our tablets the partition format changes from rfs to ext4 because its faster and more reliable. That being said what your experiencing is your tablet trying to boot but its not the right format because touch wiz only runs on rfs format. This happened to my tablet too when I tried to restore to stock and all I did was flash the pit and the stock firmware in Odin and it booted right up. Took my tablet about 20 minutes the first time to boot up though but it eventually did.
Sent from my SPH-L710 using xda premium

oh, is that the case? but my sister's tab isnt rooted nor had any custom roms before i flashed it. it was on stock firmware.. would it really take that long (20mins+) for a newly flashed device to boot up? approximately how long would should i keep it stuck at the samsung logo before i quit? im willing to wait hours, just for the tab to work. im gonna flash it again using 2.3.6 gingerbread firmware and a pit file using odin, and gonna let it stand until i wake up later and report the results. thank you so much!

chir0n said:
oh, is that the case? but my sister's tab isnt rooted nor had any custom roms before i flashed it. it was on stock firmware.. would it really take that long (20mins+) for a newly flashed device to boot up? approximately how long would should i keep it stuck at the samsung logo before i quit? im willing to wait hours, just for the tab to work. im gonna flash it again using 2.3.6 gingerbread firmware and a pit file using odin, and gonna let it stand until i wake up later and report the results. thank you so much!
Click to expand...
Click to collapse
I would say wait 20 minutes or just stare at the Samsung logo if it appears to blink and stay at the Samsung logo then your still in a boot loop BTW how did you update the tab? If you did it correctly it should have been just OTA correct? Or did you flash it manually in stock recovery?
Sent from my SPH-L710 using xda premium

jazz995756 said:
I would say wait 20 minutes or just stare at the Samsung logo if it appears to blink and stay at the Samsung logo then your still in a boot loop BTW how did you update the tab? If you did it correctly it should have been just OTA correct? Or did you flash it manually in stock recovery?
Sent from my SPH-L710 using xda premium
Click to expand...
Click to collapse
i flashed it using odin the first time, using a german firmware+pit file i downloaded at sammobile. is that called stock recovery? YES, the samsung logo blinks, so i am in a boot loop now..how can i fix this.. my sister's getting angry now i really need to fix this asap
ps. what is OTA?

chir0n said:
i flashed it using odin the first time, using a german firmware+pit file i downloaded at sammobile. is that called stock recovery? YES, the samsung logo blinks, so i am in a boot loop now..how can i fix this.. my sister's getting angry now i really need to fix this asap
ps. what is OTA?
Click to expand...
Click to collapse
OTA stands for over the air update and well do you still get errors in recovery? And did you flash that pit file with all the other firmwares u had?
Sent from my SPH-L710 using xda premium

i fixed it, finally.
i followed instructions from the Overcome Rom 4.0 tutorials by sos_sifou which is located on the samsung galaxy tab general forum.
first, i downloaded the GB-stock-safe-v5 rom, flash the pda, pit, and the phone modem.bin file. i think what my error really is was i wasn't adding a modem file. after flashing, still i got a couple of errors in recovery mode BUT after it restarted by itself, it booted right away, no 20 minute waiting time. then from there, i was really happy that i managed to fix it but i had gone for a little more. i installed overcome kernel and rom which i was glad i did, its really fast now, and really stable. instructions are easy to follow, you cant miss anything but as pre se, you have to follow everything carefully.
thanks anyway for all the help dude, i wish you also could fix your bricked tab? i read your thread a while back, good luck to you

chir0n said:
i fixed it, finally.
i followed instructions from the Overcome Rom 4.0 tutorials by sos_sifou which is located on the samsung galaxy tab general forum.
first, i downloaded the GB-stock-safe-v5 rom, flash the pda, pit, and the phone modem.bin file. i think what my error really is was i wasn't adding a modem file. after flashing, still i got a couple of errors in recovery mode BUT after it restarted by itself, it booted right away, no 20 minute waiting time. then from there, i was really happy that i managed to fix it but i had gone for a little more. i installed overcome kernel and rom which i was glad i did, its really fast now, and really stable. instructions are easy to follow, you cant miss anything but as pre se, you have to follow everything carefully.
thanks anyway for all the help dude, i wish you also could fix your bricked tab? i read your thread a while back, good luck to you
Click to expand...
Click to collapse
Its still at Samsung they charge me $170 cuz I got a suggestion to flash overcome and I bricked it so I just bought a different one
Sent from my SPH-L710 using xda premium

That is because yours is CDMA tab.
Overcome is for GSM only.
Sent from my GT-P1000 using xda app-developers app

jazz995756 said:
Its still at Samsung they charge me $170 cuz I got a suggestion to flash overcome and I bricked it so I just bought a different one
priyana:
That is because yours is CDMA tab.
Overcome is for GSM only.
Click to expand...
Click to collapse
That's some really bad thing that's gone, anyway if you can afford the $170 then why not? instead of just forsaking the tab away. again thanks for all the help dude, it was my first time flashing android devices, but not nokias. it was different in someway, anyhow just always be cautious of what you do always. please close thread tnx

i need help
chir0n said:
i fixed it, finally.
i followed instructions from the Overcome Rom 4.0 tutorials by sos_sifou which is located on the samsung galaxy tab general forum.
first, i downloaded the GB-stock-safe-v5 rom, flash the pda, pit, and the phone modem.bin file. i think what my error really is was i wasn't adding a modem file. after flashing, still i got a couple of errors in recovery mode BUT after it restarted by itself, it booted right away, no 20 minute waiting time. then from there, i was really happy that i managed to fix it but i had gone for a little more. i installed overcome kernel and rom which i was glad i did, its really fast now, and really stable. instructions are easy to follow, you cant miss anything but as pre se, you have to follow everything carefully.
thanks anyway for all the help dude, i wish you also could fix your bricked tab? i read your thread a while back, good luck to you
Click to expand...
Click to collapse
after years with this tab, i decide to upgrade to ics so i can have bbm installed.
i flashed (root) the device with odin and now i am stuck in boot-loop.
please, where do i start?
---------- Post added at 11:29 PM ---------- Previous post was at 11:28 PM ----------
jazz995756 said:
Its still at Samsung they charge me $170 cuz I got a suggestion to flash overcome and I bricked it so I just bought a different one
Sent from my SPH-L710 using xda premium
Click to expand...
Click to collapse
after years with this tab, i decide to upgrade to ics so i can have bbm installed.
i flashed (root) the device with odin and now i am stuck in boot-loop.
please, where do i start?
---------- Post added at 11:33 PM ---------- Previous post was at 11:29 PM ----------
jazz995756 said:
You need to restore via Odin first download Odin then head over to this link
http://allkindfile.blogspot.com/2012/07/odin-flasher-and-original-ops-pit-file.html?m=1 scroll down to the bottom and find the Samsung galaxy tab pit for the gt-p1000 after that go to this link http://www.sammobile.com/firmwares/ and search your tablet in the search box and it should say Germany on it download that file. Boit into download mode i believe its voljme down + power. Open Odin and click pit and open the pit file you downloaded. Then click PDA and find the firmware you got from the last link. Then just hit start and you should be good to go
Sent from my SPH-L710 using xda premium
Click to expand...
Click to collapse
please can i have the link to the pit file, the link is hosted on hotfile which is now down.

You may want to use the Overcome Method: http://forum.xda-developers.com/showthread.php?t=1881981
Sent from my GT-P1000 using XDA Premium 4 mobile app

tunjicool said:
after years with this tab, i decide to upgrade to ics so i can have bbm installed.
i flashed (root) the device with odin and now i am stuck in boot-loop.
please, where do i start?
---------- Post added at 11:29 PM ---------- Previous post was at 11:28 PM ----------
after years with this tab, i decide to upgrade to ics so i can have bbm installed.
i flashed (root) the device with odin and now i am stuck in boot-loop.
please, where do i start?
---------- Post added at 11:33 PM ---------- Previous post was at 11:29 PM ----------
please can i have the link to the pit file, the link is hosted on hotfile which is now down.
Click to expand...
Click to collapse
Ensure that you flashed a correct ROM for your tablet model, and that you cleared data when you flashed (from recovery).

xz124 said:
Ensure that you flashed a correct ROM for your tablet model, and that you cleared data when you flashed (from recovery).
Click to expand...
Click to collapse
thank you for this reply. though it came a bit late.
the device is dead!!!
if i on it now, it will only on the camera flash light as long as i hold the power button and then off the light when i release the button.
i don't know what to do.
i guess i can still get help on reviving it somehow or else i should start planning the burial .