Related
oK So i rooted my phone using Odin.
can anyone tell me is there anything wrong with my kernel Version or anything??
im afraid that i might have done something wrong because i cant use Rom toolbox ,it would suddenly force close whenever i try to use it. My phone also easily overheats when i play games. is it because of the rooting?? what should i do to set it right? any kind advices would be helpful.thanks!
please do check on the image i attached since im a new user and cant put links.
its the "About Phone".
If iI am not mistaken you are still using stock KKA kernel and its not rooted yet. Find CF kernel that will match your firmware under development.
..
You are not suppose to Root it using Odin, How you rooted? mention steps you have followed
Can you see yellow triangle on Boot?
jon3sh said:
If iI am not mistaken you are still using stock KKA kernel and its not rooted yet. Find CF kernel that will match your firmware under development.
..
Click to expand...
Click to collapse
i think it is rooted because i have the superuser App and i can explore to the system files?? *confused*
Sent from my GT-N7000 using XDA App
dr.ketan said:
You are not suppose to Root it using Odin, How you rooted? mention steps you have followed
Can you see yellow triangle on Boot?
Click to expand...
Click to collapse
sorry i cannot paste the link.
the steps i followed is on the site named Hackapc.com
just search in google 'Hackapc how to root galaxy note'
and i had the yellow triangle once but i was able to remove it using the steps you gave me..
Sent from my GT-N7000 using XDA App
Sent from my GT-N7000 using XDA App
If you use Titanium Backup (Pro): just lauch it and at first screen it will tell you your Note is rooted or not. Simple to test.
crz2uf said:
sorry i cannot paste the link.
the steps i followed is on the site named Hackapc.com
just search in google 'Hackapc how to root galaxy note'
and i had the yellow triangle once but i was able to remove it using the steps you gave me..
Sent from my GT-N7000 using XDA App
Sent from my GT-N7000 using XDA App
Click to expand...
Click to collapse
Ok got it now, you did wrong.
You have rooted note with Netchip method, You shud not do it. Thats why you have got yellow triangle. Just check you binary counter, it may also get raised. You can see it during download mode (Vol down + Home + Power), you can see it on Lt upper corner, if it raised, you can reset it with JIG only.
Oh no... can i make that usb jig? ... do you think this link is good ? http://forum.xda-developers.com/showthread.php?t=819551
"Custom Binary download: YES (1count)
Current Binary: Samsung Official"
im doooommed... >.<
dr.ketan said:
Ok got it now, you did wrong.
You have rooted note with Netchip method, You shud not do it. Thats why you have got yellow triangle. Just check you binary counter, it may also get raised. You can see it during download mode (Vol down + Home + Power), you can see it on Lt upper corner, if it raised, you can reset it with JIG only.
Click to expand...
Click to collapse
So i did the Netchip method? ... what is the other method?
crz2uf said:
So i did the Netchip method? ... what is the other method?
Click to expand...
Click to collapse
Yes I have check that link too. It is Netchip method, later on Netchip also said 'Dont use it, otherwise it will raise binary count'
Correct method is, just read 1st link of my signature.
You can masde JIG yourself too, you have shown link is correct, OR you may purchase from market. You may find on Ebay, hardly it may cost 3-4 $
Dr. Ketan, i made my usb jig . i used it, it opened to the download mode but it did not reset. the only difference is that it written, Factory mode instead of Odin mode. What to do??
Dr.Ketan, I made my USB jig. my phone opened in download mode but the binary is not reset?..But instead of Odin Mode it is written Factory Mode.... what to do??'
have you followed this?
http://forum.xda-developers.com/showthread.php?t=1354888
Confirm JIG is working properly, n you have to follow last 3 steps blindly(in screen off)
timing is very important.
repeat procedure.
is this true?
http://pinoydroid.net/enable-usb-jig-binary-counter-reset-installing-firmware
that i have a new bootloader and i cant reset my binary counter?..
do you have any old bootloader i can use for my note?
I dont advise it. Just follow the link i have provided, many of Note user have successfully reset it.
Dr. Ketan, Thanks a bunch. Ill be doing it in a couple of days. Ill get some sleep and do this when "im in a peacful mind" .. i hope it will work.
once i will be able to reset it, can i unroot it and the maybe root it again without using the netchip method?.. or, it wouldnt matter anymore?... because cannot even change the boot animation, i think the rooting i did is bad.
Ya of course You can get Unroot / Root again.
And you have to follow right method to Root (find from my signature)
GudLuck !
I followed your link.. and YES!! my binary count has been reset.. ;D thank you thank you!! will follow your post to unroot..
I followed your unrooting video it was completed and the phone restarted but then when i check, i still have superuser app and i can still see the word "root" in my kernel version... any advice?
i found out that my phone still has SuperUser app but then i get this
so, my phone is rooted? or? ..as you can see i also have the circular battery display which normally are for rooted phones right?
Sent from my GT-N7000 using XDA App
I flashed via CWM MUI v.3 cuz the v.4 needed v3 due a bug but it hang on flashing boot.IMG. so i had to took out battery. Since then no charging / detection / download mode by buttons. Possible Ultimate brick?
Can access recovery mode?
Thanks
dr.ketan said:
Can access recovery mode?
Click to expand...
Click to collapse
Dr. Ketan,
Black screen no detection no recovery
First make sure your battery is not completely empty. Try to charge with external charger or manage for other battery
Still nothing then manage for JIG as last option
Dr. KEtan,
I bricked the note with 95% then removed battery to prevent drain while briked. Will try JIG tonight., Will let u know
jeroen180 said:
Dr. KEtan,
I bricked the note with 95% then removed battery to prevent drain while briked. Will try JIG tonight., Will let u know
Click to expand...
Click to collapse
Jigged it... Its confirmed. It is the SUPER-brick. Superbrick via CWM wattaf...
jeroen180 said:
Jigged it... Its confirmed. It is the SUPER-brick. Superbrick via CWM wattaf...
Click to expand...
Click to collapse
What do you think it is related with brick? Is it your fault of kernel or ROM fault. It is really annoying situation... Im sorry for your loss man...
Im not really an expert on android, but i would consider myself an advanced user so correct me if im wrong....
Couldnt it be, that the boot.img from the rom got corrupted somehow and thats the reason why it hanged while flashing it? Coz as of how i understood what the boot.img is used for, it would explain why u cant boot in recovery/dl-mode. Simply coz there is no bootloader on ur phone. Just an idea...
Sent from my GT-N7000 using xda premium
shrooms90 said:
Im not really an expert on android, but i would consider myself an advanced user so correct me if im wrong....
Couldnt it be, that the boot.img from the rom got corrupted somehow and thats the reason why it hanged while flashing it? Coz as of how i understood what the boot.img is used for, it would explain why u cant boot in recovery/dl-mode. Simply coz there is no bootloader on ur phone. Just an idea...
Sent from my GT-N7000 using xda premium
Click to expand...
Click to collapse
Well, im not a pro too to understand that since CWM erased bootloader and did not replaced it with the other version. How about SSC? Will they notice since my counter was not reset?
Worth a try
Sent from my GT-N7000 using xda premium
nokiamodeln91 said:
Worth a try
Sent from my GT-N7000 using xda premium
Click to expand...
Click to collapse
If they found out its my fault.. .will they charge or call me to fix it foor like.... 200 ~ 300 EU?
I have warned in hydracore thread that CWM 6.0.1.2 caused me and another user from a different thread to softbrick.
I got bashed by the fanatics in return.
Sorry to hear about your incident.
praetorius said:
I have warned in hydracore thread that CWM 6.0.1.2 caused me and another user from a different thread to softbrick.
I got bashed by the fanatics in return.
Sorry to hear about your incident.
Click to expand...
Click to collapse
LoL i should read that..... Im getting JTAGGED soon..
jeroen180 said:
Well, im not a pro too to understand that since CWM erased bootloader and did not replaced it with the other version. How about SSC? Will they notice since my counter was not reset?
Click to expand...
Click to collapse
Looks like MIUI bug
Look hère : http://miuiandroid.com/community/index.php?threads/17408/
Envoyé depuis mon GT-N7000
@jeroen180 send it in, they wont notice, just tell them ur phone got slow sow u did a factory reset and now it refuses to boot send my sgs in that way, before the jig was know, and my gf sent her sgs plus in abot 2 weeks ago with the same story
Sent from my GT-N7000 using xda premium
Yeah, I agree, if you tell them you just had to do a factory reset because it got really slow and laggy than they shouldn't have a problem. They wouldn't bill you either unless they had prior authorization.
netopyr said:
Looks like MIUI bug
Look hère : http://miuiandroid.com/community/index.php?threads/17408/
Envoyé depuis mon GT-N7000
Click to expand...
Click to collapse
First off before you start quoting other threads in other fourms, take a minute to get your facts in order.. Miui for the note has not been released to the public as of this date because it has the possibility to brick you device as it has the unsafe Samsung kernel (yes the same kernel as your stock note ), so if your running Miui on your note than your running a leaked version (then in that case you should know the risk involved) that is either running the stock kernel or it has one of the hydracore versions as it is the only option miui has at the moment unless your on one of the cm versions. So not defending either the rom/kernel he was trying to flash or what he was coming from as he really doesn't state either .. it would help if he provided such information. Sorry to the owner but before you get your device JTAGGED you may want to check with a samasung service center because the JTAGGED will void your warranty..
jeroen180 said:
Well, im not a pro too to understand that since CWM erased bootloader and did not replaced it with the other version. How about SSC? Will they notice since my counter was not reset?
Click to expand...
Click to collapse
No ,CWM will not erase or even touch the bootloaders ,only PC ODIN can do that ,boot.img refers to the kernel ,I've had a corrupted boot.img flash once ,easily solved via PC ODIN ,the phone would start up and show the logo but nothing more if that happens .I doubt that's the case here but you could try a blind flash in PC odin and see if that works .
MR.change said:
No ,CWM will not erase or even touch the bootloaders ,only PC ODIN can do that ,boot.img refers to the kernel ,I've had a corrupted boot.img flash once ,easily solved via PC ODIN ,the phone would start up and show the logo but nothing more if that happens .I doubt that's the case here but you could try a blind flash in PC odin and see if that works .
Click to expand...
Click to collapse
How you explain the phone stays black screen after hanging in CWM with boot.img? U suggest my board broke by accident? Someone can explain?
Could it be,
that,,,, i forgot to reboot after flashing the Hydrakernel... and eMMC bricked the bootloader perhaps? since the bootloader is stored on the chip as well?
Guys i have a big problem. Every time i turn of my phone or try to put it on download mode or recovery mode it stucks in black screen and dont responding like it's been bricked. But when i remove the battery for 2 min and place it again it's opening normaly. Im in stock filmware and just rooted. Can u tell me why this is happening? Maybe i have to flash the official filmware again or somethink?
bagelismar said:
Guys i have a big problem. Every time i turn of my phone or try to put it on download mode or recovery mode it stucks in black screen and dont responding like it's been bricked. But when i remove the battery for 2 min and place it again it's opening normaly. Im in stock filmware and just rooted. Can u tell me why this is happening? Maybe i have to flash the official filmware again or somethink?
Click to expand...
Click to collapse
Are you on stock kernel? If so then flash some safe kernel and try full wipe, if that too doesn't help, then flash stock firmware using pc odin.
I am assuming you are on ICS, as you didn't provide any info. You should have mentioned the method used for root and everything.
jeetu1981 said:
Are you on stock kernel? If so then flash some safe kernel and try full wipe, if that too doesn't help, then flash stock firmware using pc odin.
I am assuming you are on ICS, as you didn't provide any info. You should have mentioned the method used for root and everything.
Click to expand...
Click to collapse
Sorry man your right. I used cursed4eva way that i found on a youtube video and im in ICS your right. All my broblems start when i wanted to flash a custom rom and with android recovery i tried to install AbyssNotekerne.zip from my external sd. Since i couldn't cause i was getting some kind of error i think somethink about licence i stop cause i didnt want to brick my phone and after this all problems began. So any help is welcome thank you
bagelismar said:
Sorry man your right. I used cursed4eva way that i found on a youtube video and im in ICS your right. All my broblems start when i wanted to flash a custom rom and with android recovery i tried to install AbyssNotekerne.zip from my external sd. Since i couldn't cause i was getting some kind of error i think somethink about licence i stop cause i didnt want to brick my phone and after this all problems began. So any help is welcome thank you
Click to expand...
Click to collapse
Now i cant even get to download mode to use odin to flash GB rom. I tried flashing abyss kernel using srock ICS recovery and that's the main reason for current situation i think. Any help?
bagelismar said:
Now i cant even get to download mode to use odin to flash GB rom. I tried flashing abyss kernel using srock ICS recovery and that's the main reason for current situation i think. Any help?
Click to expand...
Click to collapse
Take it to a samsung service center and ask them to reset the phone. Tell them its too slow after the latest update using kies. If there is a problem with the motherboard they will report back and replace under warranty.
Else they will install the OS completely new and you can start from scratch to root and install other custom roms.
Try using USB jig to go to download mode, try it first. Jig is not expensive.
Sent from my U1 using xda premium
heavenhated said:
Take it to a samsung service center and ask them to reset the phone. Tell them its too slow after the latest update using kies. If there is a problem with the motherboard they will report back and replace under warranty.
Else they will install the OS completely new and you can start from scratch to root and install other custom roms.
Click to expand...
Click to collapse
Will my warranty be still active cause my phone is rooted...? Somehow my phone start up this morning but im afraid trying to flash somethink like GB official with odin or somethink like that cause i dont know if it will open again That means that my phone isn't bricked yet cause it's open now? Thanks a lot for help
jonpaslim said:
Try using USB jig to go to download mode, try it first. Jig is not expensive.
Sent from my U1 using xda premium
Click to expand...
Click to collapse
because he tries the jig before it cost anything
bagelismar said:
Will my warranty be still active cause my phone is rooted...? Somehow my phone start up this morning but im afraid trying to flash somethink like GB official with odin or somethink like that cause i dont know if it will open again That means that my phone isn't bricked yet cause it's open now? Thanks a lot for help
Click to expand...
Click to collapse
No it's not bricked. Yes you lose your warranty, but you can unroot your Note. Don't warry Note is so good phone, that you don't need warranty
notko said:
No it's not bricked. Yes you lose your warranty, but you can unroot your Note. Don't warry Note is so good phone, that you don't need warranty
Click to expand...
Click to collapse
Then if it's not bricked why i need to remove the battery for 1 hour and wait an other 2 hours to finally open my phone after a simple turn off? Thats why i want the warranty so i can take the phone to samsung and fix this issue. And im afraid to unroot it cause when ever i try to put my phone on recovery mode its stucks and take for ever to open againm\
So im lost. I flashed the wrong rom and bricked my vzw tab. First time iv ever bricked any device unfortunately. How do i fix it? Odin? Im not boot looping and i cant get into recovery but i believe i can get into download mode. And advice and id be very thankful. Or do i have a new paperweight
Sent from my LG-LS970 using xda app-developers app
Odin/heimdall flash stock rom in download mode should take care of it.
Sent from my GT-P1000 using xda app-developers app
Thanks im.stressed because its not charging...that okay to odin on low batt
Sent from my LG-LS970 using xda app-developers app
so im working on this today and i cant get into download mode. i only see the phone and a computer with a orange triangle in the middle. i saw a video of how to fix it but i couldnt download the files. can anyone please point me to the right thread.
In that mode (secondary download mode) you should be able to flash if Odin detects.
Sometimes you need to keep trying until suddenly Odin detects it, and flash away.
priyana said:
In that mode (secondary download mode) you should be able to flash if Odin detects.
Sometimes you need to keep trying until suddenly Odin detects it, and flash away.
Click to expand...
Click to collapse
iv been messing with it all day and odin wont see it. any tricks?
Which file to flash?
priyana said:
In that mode (secondary download mode) you should be able to flash if Odin detects.
Sometimes you need to keep trying until suddenly Odin detects it, and flash away.
Click to expand...
Click to collapse
Hi priyana,
I do have the same problem with my Galaxy Tab GT-P1000 and I am getting the same screen.
Did flash my device with Odin but the wrong something cwm10.x , forgot which one I used (well done I know )
It is a Vodafone (Germany) Galaxy Tab 7 (GT-P1000).
May I ask some questions:
What do you mean with "flash it away" what do you suggest him to use for flashing?
What is it? A Recovery? A Bootloader ...? And where can one find/get it?
Stupid questions - I got confused while reading thousands of threads on different websites...
But anyway, I would be thankful if you could point me to the right file I could use to flash on my Galaxy Tab ...
Thanks
Hi Hotstart,
I mean flash a stock ROM in Odin once Odin see the tab.
One good complete ROM is gb-stock-save-v5 that Team Overcome packed together.
Follow my signature.
There is that and a PDF guide, you need the page 7 of it for what to put in Odin.
Not for ruthlessbeatle, as this is for GSM P1000 only.
Sent from my GT-P1000 using xda app-developers app
hotstart said:
Hi priyana,
I do have the same problem with my Galaxy Tab GT-P1000 and I am getting the same screen.
Did flash my device with Odin but the wrong something cwm10.x , forgot which one I used (well done I know )
It is a Vodafone (Germany) Galaxy Tab 7 (GT-P1000).
May I ask some questions:
What do you mean with "flash it away" what do you suggest him to use for flashing?
What is it? A Recovery? A Bootloader ...? And where can one find/get it?
Stupid questions - I got confused while reading thousands of threads on different websites...
But anyway, I would be thankful if you could point me to the right file I could use to flash on my Galaxy Tab ...
Thanks
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=1133590
this helped me a ton i was bricked and now im back kinda of. remember read everything 2 twice if you have to. i could use a hand again though im back to bootlooping at the vzw screen after i used the link above. i wiped after flash but still bootlooping. its not cuz i converted to ext4 because i saw others who had converted and didnt have a problem. any advice on how i get this bad boy to spot boot looping thanks
priyana said:
Hi Hotstart,
I mean flash a stock ROM in Odin once Odin see the tab.
One good complete ROM is gb-stock-save-v5 that Team Overcome packed together.
Follow my signature.
There is that and a PDF guide, you need the page 7 of it for what to put in Odin.
Click to expand...
Click to collapse
Hi priyana,
thank you for your advice!
Currently I am stuck because in the middle of the flashing process the tab switched off maybe due to a low battery.
But is starting with the secondary download screen again - so I am hoping to be able to load it bit better for the next try.
Will let you know whatever outcome there will be.
Cheers
Hi,
Yesterday I've rooted my Samsung Galaxy Note GT-N7000 with Phillz JPLSB prerooted kernel. The problem is that I've used the .md5 version (not the .zip one) and flashed the kernel with Odin.
Now I have the annoying yellow triangle and my counter is setted to 1. I tried using Chainfire's Triangle away, but it asks to boot in special mode and then the mobile model number isn't correctly detected, it shows n7000b and mine is n7000.
I don't want to brick my phone 'cause I've read that if the model isn't correctly detected, using Triangle away may brick the phone.
That's the reason I'm here and asking, can I go ahead and it won't brick the phone? or I must wait for a newer version, of Triangle away by Chainfire? Is there any difference between n7000b and the n7000?
Alternatively, is there another method to get rid of the triangle and reset the counter ?
Details of my Device :
Samsung Galaxy Note GT-N7000
ROM : Stock 4.1.2 N7000JPLSB_N7000OJPLSA_TMC (Algeria)
Kernel : PhilZ-cwm6-JPLSB-UAE-4.89.4
Thanking you
You know, I've wondered about the flash triangle problem.
Granted, my phone is OUT of warranty, so I never worry about the yellow bang when it boots.
Is there any reason, if out of warranty, to even bother getting rid of the yellow bang, other than
someone that has a bad case of OCD?
It doesn't seem to affect the performance of my phone, so I wonder, unless your device is under
warranty, does it matter if it has the yellow ! showing up on boot?
3abboud said:
Hi,
Yesterday I've rooted my Samsung Galaxy Note GT-N7000 with Phillz JPLSB prerooted kernel. The problem is that I've used the .md5 version (not the .zip one) and flashed the kernel with Odin.
Now I have the annoying yellow triangle and my counter is setted to 1. I tried using Chainfire's Triangle away, but it asks to boot in special mode and then the mobile model number isn't correctly detected, it shows n7000b and mine is n7000.
I don't want to brick my phone 'cause I've read that if the model isn't correctly detected, using Triangle away may brick the phone.
That's the reason I'm here and asking, can I go ahead and it won't brick the phone? or I must wait for a newer version, of Triangle away by Chainfire? Is there any difference between n7000b and the n7000?
Alternatively, is there another method to get rid of the triangle and reset the counter ?
Details of my Device :
Samsung Galaxy Note GT-N7000
ROM : Stock 4.1.2 N7000JPLSB_N7000OJPLSA_TMC (Algeria)
Kernel : PhilZ-cwm6-JPLSB-UAE-4.89.4
Thanking you
Click to expand...
Click to collapse
yes, you can use a jig to get rid of it and reset the counter....http://forum.xda-developers.com/showthread.php?t=1354888
p51d007 said:
It doesn't seem to affect the performance of my phone, so I wonder, unless your device is under
warranty, does it matter if it has the yellow ! showing up on boot?
Click to expand...
Click to collapse
It's essentially the warranty problem, I have it for more 3 months. Also, I really love perfection end the yellow triangle bothers me, I know that it doesn't alter performance :cyclops:
glevitan said:
yes, you can use a jig to get rid of it and reset the counter....http://forum.xda-developers.com/showthread.php?t=1354888
Click to expand...
Click to collapse
Can't buy a jig, and making one isn't really an option for me, thank you for your help.
Any help please!
Ynt: Device model not properly detected -Triangle away-
3abboud said:
Any help please!
Click to expand...
Click to collapse
Edited, i search and saw i'm wrong,so changed the post.sorry.
GT-N7000 cihazımdan Tapatalk 2 ile gönderildi
maktama said:
Edited, i search and saw i'm wrong,so changed the post.sorry.
Click to expand...
Click to collapse
no problem, thanks !
Problem solved
3abboud said:
Now I have the annoying yellow triangle and my counter is setted to 1. I tried using Chainfire's Triangle away, but it asks to boot in special mode and then the mobile model number isn't correctly detected, it shows n7000b and mine is n7000
Click to expand...
Click to collapse
Hi, I'm here to tell you that Triangle Away didn't brick the phone.