Hi,
Yesterday I've rooted my Samsung Galaxy Note GT-N7000 with Phillz JPLSB prerooted kernel. The problem is that I've used the .md5 version (not the .zip one) and flashed the kernel with Odin.
Now I have the annoying yellow triangle and my counter is setted to 1. I tried using Chainfire's Triangle away, but it asks to boot in special mode and then the mobile model number isn't correctly detected, it shows n7000b and mine is n7000.
I don't want to brick my phone 'cause I've read that if the model isn't correctly detected, using Triangle away may brick the phone.
That's the reason I'm here and asking, can I go ahead and it won't brick the phone? or I must wait for a newer version, of Triangle away by Chainfire? Is there any difference between n7000b and the n7000?
Alternatively, is there another method to get rid of the triangle and reset the counter ?
Details of my Device :
Samsung Galaxy Note GT-N7000
ROM : Stock 4.1.2 N7000JPLSB_N7000OJPLSA_TMC (Algeria)
Kernel : PhilZ-cwm6-JPLSB-UAE-4.89.4
Thanking you
You know, I've wondered about the flash triangle problem.
Granted, my phone is OUT of warranty, so I never worry about the yellow bang when it boots.
Is there any reason, if out of warranty, to even bother getting rid of the yellow bang, other than
someone that has a bad case of OCD?
It doesn't seem to affect the performance of my phone, so I wonder, unless your device is under
warranty, does it matter if it has the yellow ! showing up on boot?
3abboud said:
Hi,
Yesterday I've rooted my Samsung Galaxy Note GT-N7000 with Phillz JPLSB prerooted kernel. The problem is that I've used the .md5 version (not the .zip one) and flashed the kernel with Odin.
Now I have the annoying yellow triangle and my counter is setted to 1. I tried using Chainfire's Triangle away, but it asks to boot in special mode and then the mobile model number isn't correctly detected, it shows n7000b and mine is n7000.
I don't want to brick my phone 'cause I've read that if the model isn't correctly detected, using Triangle away may brick the phone.
That's the reason I'm here and asking, can I go ahead and it won't brick the phone? or I must wait for a newer version, of Triangle away by Chainfire? Is there any difference between n7000b and the n7000?
Alternatively, is there another method to get rid of the triangle and reset the counter ?
Details of my Device :
Samsung Galaxy Note GT-N7000
ROM : Stock 4.1.2 N7000JPLSB_N7000OJPLSA_TMC (Algeria)
Kernel : PhilZ-cwm6-JPLSB-UAE-4.89.4
Thanking you
Click to expand...
Click to collapse
yes, you can use a jig to get rid of it and reset the counter....http://forum.xda-developers.com/showthread.php?t=1354888
p51d007 said:
It doesn't seem to affect the performance of my phone, so I wonder, unless your device is under
warranty, does it matter if it has the yellow ! showing up on boot?
Click to expand...
Click to collapse
It's essentially the warranty problem, I have it for more 3 months. Also, I really love perfection end the yellow triangle bothers me, I know that it doesn't alter performance :cyclops:
glevitan said:
yes, you can use a jig to get rid of it and reset the counter....http://forum.xda-developers.com/showthread.php?t=1354888
Click to expand...
Click to collapse
Can't buy a jig, and making one isn't really an option for me, thank you for your help.
Any help please!
Ynt: Device model not properly detected -Triangle away-
3abboud said:
Any help please!
Click to expand...
Click to collapse
Edited, i search and saw i'm wrong,so changed the post.sorry.
GT-N7000 cihazımdan Tapatalk 2 ile gönderildi
maktama said:
Edited, i search and saw i'm wrong,so changed the post.sorry.
Click to expand...
Click to collapse
no problem, thanks !
Problem solved
3abboud said:
Now I have the annoying yellow triangle and my counter is setted to 1. I tried using Chainfire's Triangle away, but it asks to boot in special mode and then the mobile model number isn't correctly detected, it shows n7000b and mine is n7000
Click to expand...
Click to collapse
Hi, I'm here to tell you that Triangle Away didn't brick the phone.
Related
oK So i rooted my phone using Odin.
can anyone tell me is there anything wrong with my kernel Version or anything??
im afraid that i might have done something wrong because i cant use Rom toolbox ,it would suddenly force close whenever i try to use it. My phone also easily overheats when i play games. is it because of the rooting?? what should i do to set it right? any kind advices would be helpful.thanks!
please do check on the image i attached since im a new user and cant put links.
its the "About Phone".
If iI am not mistaken you are still using stock KKA kernel and its not rooted yet. Find CF kernel that will match your firmware under development.
..
You are not suppose to Root it using Odin, How you rooted? mention steps you have followed
Can you see yellow triangle on Boot?
jon3sh said:
If iI am not mistaken you are still using stock KKA kernel and its not rooted yet. Find CF kernel that will match your firmware under development.
..
Click to expand...
Click to collapse
i think it is rooted because i have the superuser App and i can explore to the system files?? *confused*
Sent from my GT-N7000 using XDA App
dr.ketan said:
You are not suppose to Root it using Odin, How you rooted? mention steps you have followed
Can you see yellow triangle on Boot?
Click to expand...
Click to collapse
sorry i cannot paste the link.
the steps i followed is on the site named Hackapc.com
just search in google 'Hackapc how to root galaxy note'
and i had the yellow triangle once but i was able to remove it using the steps you gave me..
Sent from my GT-N7000 using XDA App
Sent from my GT-N7000 using XDA App
If you use Titanium Backup (Pro): just lauch it and at first screen it will tell you your Note is rooted or not. Simple to test.
crz2uf said:
sorry i cannot paste the link.
the steps i followed is on the site named Hackapc.com
just search in google 'Hackapc how to root galaxy note'
and i had the yellow triangle once but i was able to remove it using the steps you gave me..
Sent from my GT-N7000 using XDA App
Sent from my GT-N7000 using XDA App
Click to expand...
Click to collapse
Ok got it now, you did wrong.
You have rooted note with Netchip method, You shud not do it. Thats why you have got yellow triangle. Just check you binary counter, it may also get raised. You can see it during download mode (Vol down + Home + Power), you can see it on Lt upper corner, if it raised, you can reset it with JIG only.
Oh no... can i make that usb jig? ... do you think this link is good ? http://forum.xda-developers.com/showthread.php?t=819551
"Custom Binary download: YES (1count)
Current Binary: Samsung Official"
im doooommed... >.<
dr.ketan said:
Ok got it now, you did wrong.
You have rooted note with Netchip method, You shud not do it. Thats why you have got yellow triangle. Just check you binary counter, it may also get raised. You can see it during download mode (Vol down + Home + Power), you can see it on Lt upper corner, if it raised, you can reset it with JIG only.
Click to expand...
Click to collapse
So i did the Netchip method? ... what is the other method?
crz2uf said:
So i did the Netchip method? ... what is the other method?
Click to expand...
Click to collapse
Yes I have check that link too. It is Netchip method, later on Netchip also said 'Dont use it, otherwise it will raise binary count'
Correct method is, just read 1st link of my signature.
You can masde JIG yourself too, you have shown link is correct, OR you may purchase from market. You may find on Ebay, hardly it may cost 3-4 $
Dr. Ketan, i made my usb jig . i used it, it opened to the download mode but it did not reset. the only difference is that it written, Factory mode instead of Odin mode. What to do??
Dr.Ketan, I made my USB jig. my phone opened in download mode but the binary is not reset?..But instead of Odin Mode it is written Factory Mode.... what to do??'
have you followed this?
http://forum.xda-developers.com/showthread.php?t=1354888
Confirm JIG is working properly, n you have to follow last 3 steps blindly(in screen off)
timing is very important.
repeat procedure.
is this true?
http://pinoydroid.net/enable-usb-jig-binary-counter-reset-installing-firmware
that i have a new bootloader and i cant reset my binary counter?..
do you have any old bootloader i can use for my note?
I dont advise it. Just follow the link i have provided, many of Note user have successfully reset it.
Dr. Ketan, Thanks a bunch. Ill be doing it in a couple of days. Ill get some sleep and do this when "im in a peacful mind" .. i hope it will work.
once i will be able to reset it, can i unroot it and the maybe root it again without using the netchip method?.. or, it wouldnt matter anymore?... because cannot even change the boot animation, i think the rooting i did is bad.
Ya of course You can get Unroot / Root again.
And you have to follow right method to Root (find from my signature)
GudLuck !
I followed your link.. and YES!! my binary count has been reset.. ;D thank you thank you!! will follow your post to unroot..
I followed your unrooting video it was completed and the phone restarted but then when i check, i still have superuser app and i can still see the word "root" in my kernel version... any advice?
i found out that my phone still has SuperUser app but then i get this
so, my phone is rooted? or? ..as you can see i also have the circular battery display which normally are for rooted phones right?
Sent from my GT-N7000 using XDA App
i think i have bricked my phone.
i check in download mode that my custom binary download is 'NO'
and current binary is samsung official.
can i just not worry about the brick and give it to samsung telling them some story?
yeah provided no triangle and no binary count as you have stated..
musashiro said:
yeah provided no triangle and no binary count as you have stated..
Click to expand...
Click to collapse
where do we find triangle? i just have the big android logo and these details on upper left side.
Are you sure its not soft brick?
If its really hardbrick, flash the latest stock kernel from the firmware of your region (if you had custom kernel).
---------- Post added at 09:53 PM ---------- Previous post was at 09:50 PM ----------
Then you can safely return the phone to Samsung SVC.
Boy124 said:
Are you sure its not soft brick?
If its really hardbrick, flash the latest stock kernel from the firmware of your region (if you had custom kernel).
Click to expand...
Click to collapse
i dont know if its hardbrick or softbrick, i just didnt want to take chances of voiding the warranty.
i also wonder that how are the binary counts none because i have flashed loads of roms?
i belive u get the the triangle in the download page.
binary count in no and says samsung i think u can call warranty back, if not :/
try flashing and keep up to date
Lol is why ppl flash and root their phone so much. This is y its happening. Damnnn
Sent from my GT-N7000 using XDA
vivek2701 said:
i think i have bricked my phone.
i check in download mode that my custom binary download is 'NO'
and current binary is samsung official.
can i just not worry about the brick and give it to samsung telling them some story?
Click to expand...
Click to collapse
Run the story by us....
vivek2701 said:
i dont know if its hardbrick or softbrick, i just didnt want to take chances of voiding the warranty.
i also wonder that how are the binary counts none because i have flashed loads of roms?
Click to expand...
Click to collapse
I suggest you flash stock kernel before take your phone to samsung svc (If your phone is not stone cold dead).
You don't wanna get caught with Clockwork Recovery, do you ?
I just flashed lpf stock and its up and running again.. Visit to SVC dodged for now..
Sent from my GT-N7000 using Tapatalk 2
how did you do it?
vivek2701 said:
I just flashed lpf stock and its up and running again.. Visit to SVC dodged for now..
Sent from my GT-N7000 using Tapatalk 2
Click to expand...
Click to collapse
can you please give step by step detail? i tried to flash stock rom and it got stuck on factoryfs. tried everything. now i think battery is dead and its not charging anymore.
drgupta1981 said:
can you please give step by step detail? i tried to flash stock rom and it got stuck on factoryfs. tried everything. now i think battery is dead and its not charging anymore.
Click to expand...
Click to collapse
If it gets stuck on factoryfs, it may be a case of a bricked device which i hope isnt the case with you... I flashed stock lpf eith bootloader n pit files from dr ketan's thread.. Mine got through the factoryfs thing.. I suggest you to go through brick threads to grt more idea..
I tried to root my phone with this stupid fking website and after i did what the lamo said my phone got stuck at the SAMSUNG GALAXY NOTE GT-N700 with the yello triangle under it
it goes into download mode but thats all.. how can i fix this back to normal.. and can you show me how to root it the RIGHT way ???
Scarfaced4 said:
I tried to root my phone with this stupid fking website and after i did what the lamo said my phone got stuck at the SAMSUNG GALAXY NOTE GT-N700 with the yello triangle under it
it goes into download mode but thats all.. how can i fix this back to normal.. and can you show me how to root it the RIGHT way ???
Click to expand...
Click to collapse
If you are feeling this a stupid site,then why are you asking here to help you solve the problem
You might have done it in a wrong way and blaming the site
And rooting procedure varies from rom to rom
You could find all stock roms here
http://forum.xda-developers.com/showthread.php?t=1424997
Download a rom(better a gb rom) and flash it using pc odin
This is the rooting guide
http://forum.xda-developers.com/showthread.php?t=1329360
Just download any stock gb via guide above, then flash with pc Odin in the pda section whilst in download mode (Vol down, Power and home).
Sent from my GT-N7000 using xda premium
[email protected]$3K#@R said:
If you are feeling this a stupid site,then why are you asking here to help you solve the problem
You might have done it in a wrong way and blaming the site
And rooting procedure varies from rom to rom
You could find all stock roms here
http://forum.xda-developers.com/showthread.php?t=1424997
Download a rom(better a gb rom) and flash it using pc odin
This is the rooting guide
http://forum.xda-developers.com/showthread.php?t=1329360
Click to expand...
Click to collapse
+1 and after that use triangle away to remove the yellow triangle... Be polite.. Calling stupid to this site its calling stupid to everyone here.. And hey who's the stupid? You messing up with your device with not enough knowledge to do so or we whom change roms and root devices and help others everyday like changing underwear
Tapatalking on my n7000
msedek said:
+1 and after that use triangle away to remove the yellow triangle... Be polite.. Calling stupid to this site its calling stupid to everyone here.. And hey who's the stupid? You messing up with your device with not enough knowledge to do so or we whom change roms and root devices and help others everyday like changing underwear
Tapatalking on my n7000
Click to expand...
Click to collapse
Not sure he was calling xda stupid...
Sent from my GT-N7000 using xda premium
Yesterday i must to root my mobile with de Rootkit toolbox because my phone don't reconize the csc code. After that progress i've just flashed the ROM again because i don't need root of that stuff only the right ROM with can be reconize bij Samsung KIES. I'm just a normal user but the AUT ROM have some problems.
Now says the downloadmode "Custom binary Download: yes (1 counts)"
How can i reset this?
Thnx,
Marco
Triangle Away
Here you go download from here you must be rooted though. It will reset binary count to 0.
http://forum.xda-developers.com/showthread.php?t=1494114
Sent from my GT-I8190 using Tapatalk 2
Thnx for the answers.
I'll need my phone this 2 days, so i''l root my phone back again Wednesday or Thursday and install Triangle Away, en flash then the original ROM again,,
Read some, learn some.
Triangle away won't make your csc:unknown "problem" go away.
Reset the binary count won't make your device take kies or ota updates neither.
What do you want to achieve here? Back to unrooted stock or what?
tys0n said:
Read some, learn some.
Triangle away won't make your csc:unknown "problem" go away.
Reset the binary count won't make your device take kies or ota updates neither.
What do you want to achieve here? Back to unrooted stock or what?
Click to expand...
Click to collapse
I have just fix my csc met the Galaxy S3 Mini Toolkit (donated version).
- Root my phone with toolkit
- Download CSC Select for Galaxy S3 (mini) from Play Store
- Reflash DBT Stock ROM so i was original, but when in download mode i see that my counter just on 1 and not at no/0
(for garantee).
So i'll root my phone back one of the days, just get triangle away to reset the counter enad reflash the originale stock rom DBT.
Then my phone is with a good CSC, counter on 0, no root (no need it), KIES just working and my garantee is not gone.
tys0n said:
Read some, learn some.
Triangle away won't make your csc:unknown "problem" go away.
Reset the binary count won't make your device take kies or ota updates neither.
What do you want to achieve here? Back to unrooted stock or what?
Click to expand...
Click to collapse
Please help me. Please..explain me.. my device says custom binary download yes (1) and the following two say: custom binary: Samsung Official and system status: Official. Does custom binary download yes (1) show that someone modified my device? It is bought as new from store. It's i 9305 Samsung S3 4G. One more thing..it has some Vodafone applications on it.. we don't have Vodafone in my country. If Vodafone were messing with the phone adding apps and stuff does that changes to "Custom Binary Download Yes (1)" but the phone still has the official Samsung software??
I'm asking because I can't upgrade the phone to 4.3. I't still 4.1.2. I received official update but can't be installed. It downloads completely and when installing it gets interrupted at 27% of installing with the message try kies or PC to install your update, but then another problem...my two PCs don't recognize my device. Please help. Thank you.
I tried to root my SC-03E but I ended up with increased binary counter
My binary counter now is 10. I tried to root my SC-03E 4.3 but it didn't work. Please help!
A.C.P said:
Triangle Away
Click to expand...
Click to collapse
triangle away need root but i dont have root yet
---------- Post added at 07:33 AM ---------- Previous post was at 07:29 AM ----------
hannamarcelo said:
My binary counter now is 10. I tried to root my SC-03E 4.3 but it didn't work. Please help!
Click to expand...
Click to collapse
is that japanese phone?
i have SC-06D NTT docomo develovers.
and my binary count is 21 .
need help too.
A.C.P said:
Triangle Away
Click to expand...
Click to collapse
and when the system does not start, how do I?
My device is not power
how to remove download counter using other method My Device is Samsung galaxy core I8262
I tried rooting my galaxy note 3 at&t but i ended up bricking my phone.....now my phone only boots to galaxy note 3 logo with an opened padlock with inscription "Custom"........several attempts to flash stock 4.3 and 4.4 have failed....still the same results with padlock nd "Custom" inscription. .....pleaaaaaaaase help me fix my phone back[emoji22] [emoji22] [emoji22] [emoji22] [emoji22]
Thanks a lot
de_johnny said:
I tried rooting my galaxy note 3 at&t but i ended up bricking my phone.....now my phone only boots to galaxy note 3 logo with an opened padlock with inscription "Custom"........several attempts to flash stock 4.3 and 4.4 have failed....still the same results with padlock nd "Custom" inscription. .....pleaaaaaaaase help me fix my phone back[emoji22] [emoji22] [emoji22] [emoji22] [emoji22]
Thanks a lot
Click to expand...
Click to collapse
You try Odin NC2 files? http://forum.xda-developers.com/showpost.php?p=54803130&postcount=136
Yes please....but still not working. ...same locked on Samsung Galaxy Note 3 boot logo screen
Rooted i747 said:
You try Odin NC2 files? http://forum.xda-developers.com/showpost.php?p=54803130&postcount=136
Click to expand...
Click to collapse
Please is there some other wae out
de_johnny said:
Please is there some other wae out
Click to expand...
Click to collapse
If the phone won't boot it's the only way I know is to flash the four files with Odin.
Ohk....thanks for your help mate....very much appreciated
Phone boots to ATT ERROR
I am running Alliance 9.1 rom and I was searching for my Safestrap recovery. I didn't find it and so I tried busybox "reboot into recovery" script. Doing that made my phone go crazy "go to att and let the service tech" look at it. I can't boot into recovery as it gives me this error and I have to use ODIN to flash the BL file. Now I can't get into my phone because of a Pin. I think that the script from busy box is still running and if I can get passed my pin, I want to see if I can disable the script. My main issue is, can I use the aforementioned process to just start over? I was told I cannot use ODIN to flash to stock rom. I have already found out that I have tripped my knox counter. PLEASE HELP. THIS IS MY ONLY PHONE AND MY WIFE IS GOING TO KILL ME.
Thank you for your help.
can you get into stock recovery ?
I have and have reflashed. So far so good
Sent from my SAMSUNG-SM-N900A using XDA Free mobile app
dwarftoad said:
I have and have reflashed. So far so good
Sent from my SAMSUNG-SM-N900A using XDA Free mobile app
Click to expand...
Click to collapse
sounds good.