Problem with flashing XWHTH/XWKT9 - Samsung Galaxy Mini

I sent it into warranty because I removed the data cable while it was flashing (Odin Multi Downloader (Android) was writing in the black box and it was stuck at MIBIB)
It had 2.3.6 XWHTH/XWKT4 installed.
When I recieved it I noticed it has 2.2.1 XXKB1/XWKA8. When connected to ODIN, it detects it, it adds it but in the black box mentioned above is still Odin Multi Downloader (Android)
I am afraid to start the update because .. you know.. I don't wanna send it again 300 miles away from here.
Is it safe to proceed?
ODIN v4.38
Tass v.1.0
.tar/.md5 file OK
:angel:

why not use the Odin created for galaxy mini which show gt-s5570

... Can you explain me.. A little more.. Like a link or something? :/
Sent from my GT-S5570 using xda app-developers app

I guess this Tutorial (http://forum.xda-developers.com/showthread.php?t=1255305) should be fair enough.
Follow the steps as mentioned there, with your current downloaded firmware.

coolsandie said:
I guess this Tutorial (http://forum.xda-developers.com/showthread.php?t=1255305) should be fair enough.
Follow the steps as mentioned there, with your current downloaded firmware.
Click to expand...
Click to collapse
Well... This is happening on my screen, it is the same like when the update failed.
I just want to know If I will not wreck my phone if I go with it.
www.flickr.com/photos/[email protected]3/7703931556/

Ginga:| said:
Well... This is happening on my screen, it is the same like when the update failed.
I just want to know If I will not wreck my phone if I go with it.
www.flickr.com/photos/[email protected]/7703931556/
Click to expand...
Click to collapse
I guess it fine, whether it shows Android or GT-S5570 (happened to me at times) Just use Tass_v1.0.ops and the one package system, your screenshot looks fine.
Just check whether your downloaded firmware is good, just try extracting.
Even I got the same error that you've mentioned in your first post, that MIBIB error message. Just try again. If it doesn't work download another version and try flashing it.
EDIT: Probably you won't brick your device because Odin will not flash the firmware past that MIBIB error.

Related

Flickering screen while flashing via ODIN

Any help with this? I rooted & installed CWM on my Wildfire with no issues, but it seems like this phone's a tough nut. Can't start it up now, screen keeps flickering if I try to turn it on, don't think it can even boot up.
Your prompt reply is much appreciated!
Serenadier said:
Any help with this? I rooted & installed CWM on my Wildfire with no issues, but it seems like this phone's a tough nut. Can't start it up now, screen keeps flickering if I try to turn it on, don't think it can even boot up.
Your prompt reply is much appreciated!
Click to expand...
Click to collapse
Wildfire wrong section, this mini thread
apisfires said:
Wildfire wrong section, this mini thread
Click to expand...
Click to collapse
I mean I've done it before on my Wildfire, but there's a problem with this on the Galaxy Mini. Problem phone in question is the Galaxy Mini now.
Sorry for the misunderstanding.. any help you can offer me?
installed from where and how?
kandros said:
installed from where and how?
Click to expand...
Click to collapse
Okay so first I downloaded the OPS, Gingerbread firmware and ODIN. Then I installed Kies for drivers, and then I opened ODIN, inserted the OPS and Gingerbread firmware file, started the process.
Somehow when it came to the reboot part, the phone just kept rebooting (screen lights up, turns off, pause, repeats again) and it hasn't worked since.
Then now there's an error with setup connection which presumably has something to do with the drivers, so I reinstalled it but now setup connection keeps occurring...
Okay, now, I tried doing the whole process again... I'm stuck at 'Close serial port and wait until rebooting' as the phone constantly flickers on and off repeatedly with no sign of anything going on.
Somebody please help :/
Still the same?
Firmware from Sammobile.com?
Wait...prob is while installing cwm or GB?
Are you using the right version of odin,i think it's 4.31...?
Sent from my GT-S5570 using XDA App
Small_town_boy said:
Are you using the right version of odin,i think it's 4.31...?
Sent from my GT-S5570 using XDA App
Click to expand...
Click to collapse
Yup, 4.31, TASS v1.0 as OPS. S5570DXKPD_S5570OLBKPD for the firmware.
Problem now is I think the flashing works.. but somehow, the phone is somehow corrupt in a way that boot is not possible - nothing's possible except download mode.
I haven't played around with Samsungs, mostly HTCs so this is uncharted territory for me.
roofrider said:
Still the same?
Firmware from Sammobile.com?
Wait...prob is while installing cwm or GB?
Click to expand...
Click to collapse
Yup, firmware from Sammobile.com. Problem is while installing GB. Will trying to install CWM first at least alleviate some of the problem?
In fact... I can't even boot into the original recovery. All that happens is the phone boots... and goes into an insane loop. Can't do anything else other than that.
Thanks guys..
download again the firmware Nd retry.. till downloading mode works you are safe.. in general section FAQ post there is link and guide
Sent from my GT-S5570 using Tapatalk
Serenadier said:
Yup, 4.31, TASS v1.0 as OPS. S5570DXKPD_S5570OLBKPD for the firmware.
Problem now is I think the flashing works.. but somehow, the phone is somehow corrupt in a way that boot is not possible - nothing's possible except download mode.
I haven't played around with Samsungs, mostly HTCs so this is uncharted territory for me.
Yup, firmware from Sammobile.com. Problem is while installing GB. Will trying to install CWM first at least alleviate some of the problem?
In fact... I can't even boot into the original recovery. All that happens is the phone boots... and goes into an insane loop. Can't do anything else other than that.
Thanks guys..
Click to expand...
Click to collapse
list full name file you downloaded
1?
2?
3?
sometime, the name is wrong
Fixed?
Try flashing a multi package 2.3.x file if the latest is a one package...
Btw are u Latin and using a Latin version?
kandros said:
download again the firmware Nd retry.. till downloading mode works you are safe.. in general section FAQ post there is link and guide
Sent from my GT-S5570 using Tapatalk
Click to expand...
Click to collapse
Even when the firmware is being flashed, the screen constantly flashes on and off. Is this normal?
I'd try that, but I don't know if it would work...
roofrider said:
Fixed?
Try flashing a multi package 2.3.x file if the latest is a one package...
Btw are u Latin and using a Latin version?
Click to expand...
Click to collapse
I'm on Asia version, I downloaded a 2.3.4 Asian version too.
apisfires said:
list full name file you downloaded
1?
2?
3?
sometime, the name is wrong
Click to expand...
Click to collapse
1. From ODIN 4.38 + Tass.Ops.rar -
a. Tass_V1.0.ops
b. S5570_Odin Multi Downloader v4.38.exe
2. S5570DXKPD_S5570OLBKPD.zip
I don't think it's wrong, is it...?
Check for Tass_ops file sometimes it might be a possibility that ur using a wrong one.
dkn91 said:
Check for Tass_ops file sometimes it might be a possibility that ur using a wrong one.
Click to expand...
Click to collapse
I downloaded everything again from the Gingerbread update thread, redid everything as instructions... the phone is still in a really fast bootloop.
Serenadier said:
I downloaded everything again from the Gingerbread update thread, redid everything as instructions... the phone is still in a really fast bootloop.
Click to expand...
Click to collapse
Try flashing a 2.3.3 multi package firmware
roofrider said:
Try flashing a 2.3.3 multi package firmware
Click to expand...
Click to collapse
Doing that right away.
Is it normal for the phone to flicker on and off during the flash process, and after the flash process is complete, with ODIN showing PASS?
Okay, so installing a multi package firmware didn't work either. Now what. )': at wit's end here.
It won't flicker.
And when it's done it'll show pass.
While in download mode, Odin shows connected rite? A yellow box Appears?

[Q] How to root galaxy note GT-N7000BDULB3 version

Hello xda developers
I am wondering if someone can answer a few questions i have about rooting my samsung note?
I'm in Australia and just got my note with vodafone on Saturday. I have been doing some searching in the dev section and I haven't found my kernel version (2.6.35.7-N7000BDULB3-CL977082) to download from dr.ketan I have also searched for it on sammobile.com with no luck also.
So from the above statement does anyone know where i can get a copy of it from or know how i can backup mine from my phone atm?
I have found a root solution however It is for the GT-N7000 model which is at rootgalaxynote.com/galaxy-note-root/how-to-root-galaxy-note-gt-n7000-method-2odinheimdall
If I followed this above method would I end up bricking the phone as the phone version are different? I found nothing on a search when comparing the two
Sorry for an the essay of a post too.
Looks like you're the only guy in the whole wide world with the exotic N7000BDULB3 GB, mate.
https://www.google.com/search?client=opera&rls=en&q=N7000BDULB3&sourceid=opera&ie=utf-8&oe=utf-8
Anyway, you can always flash and root and older Rom, then upgrade to whatever you want whilst keeping your root. Here's a little guide to downgrading and rooting I wrote some time ago, hope it helps.
You'll have a rooted KK9 rom after you're done. Then you can download any new GB version (LC1 is the latest) from here and flash it with Mobile Odin, with Everroot and Inject Superuser options ticked. That will keep your root.
Good luck.
chasmodo said:
Looks like you're the only guy in the whole wide world with the exotic N7000BDULB3 GB, mate.
https://www.google.com/search?client=opera&rls=en&q=N7000BDULB3&sourceid=opera&ie=utf-8&oe=utf-8
Anyway, you can always flash and root and older Rom, then upgrade to whatever you want whilst keeping your root. Here's a little guide to downgrading and rooting I wrote some time ago, hope it helps.
You'll have a rooted KK9 rom after you're done. Then you can download any new GB version (LC1 is the latest) from here and flash it with Mobile Odin, with Everroot and Inject Superuser options ticked. That will keep your root.
Good luck.
Click to expand...
Click to collapse
Thanks for your help I will try it as soon as I get some more free time.
I have read your post y'day, but have not replied b'coz, i was waiting for input.
As you have describe method is not safe, It will give you raise flash counter
here is review of one user from thread you have mentioned.
raj says:
March 26, 2012 at 9:42 pm
Thanks so much, and your posts are one of the easiest to follow and gives a great head start for noobs! Great Job really!
I used this method and now I see a yellow triangle.
1. Will this yellow triangle during boot up, disappear if I follow your unroot method?
2. Will my phone can be updated to ICS once Samsung officially provides upgrade to ICS for Galaxy Note?
3. I tried SetCPU, the phone became very hot, when I over clocked and it just hang. I brought it back to normal.
4. What are all the other useful, important things we can do after root, other than installing Titanium Backup etc.
Click to expand...
Click to collapse
So just follow what chasmodo have advised you.
dr.ketan said:
I have read your post y'day, but have not replied b'coz, i was waiting for input.
As you have describe method is not safe, It will give you raise flash counter
here is review of one user from thread you have mentioned.
So just follow what chasmodo have advised you.
Click to expand...
Click to collapse
Thanks for all the input really appreciated, will let ya know how i go on the weekend when i have some time to do it
chasmodo said:
Looks like you're the only guy in the whole wide world with the exotic N7000BDULB3 GB, mate.
https://www.google.com/search?client=opera&rls=en&q=N7000BDULB3&sourceid=opera&ie=utf-8&oe=utf-8
Anyway, you can always flash and root and older Rom, then upgrade to whatever you want whilst keeping your root. Here's a little guide to downgrading and rooting I wrote some time ago, hope it helps.
You'll have a rooted KK9 rom after you're done. Then you can download any new GB version (LC1 is the latest) from here and flash it with Mobile Odin, with Everroot and Inject Superuser options ticked. That will keep your root.
Good luck.
Click to expand...
Click to collapse
This might be a stupid question chasmodo so bare with me.
With the KKA firmware when extracted I get the 2 files like you said the .tar.md5 and the dll file.
In odin do i just select the .tar.md5 file under the pda option? or do i have to put the dll file in an option as well.
mattybxda said:
In odin do i just select the .tar.md5 file under the pda option? or do i have to put the dll file in an option as well.
Click to expand...
Click to collapse
Just load .tar.md5 in PDA and you're good to go.
chasmodo said:
Just load .tar.md5 in PDA and you're good to go.
Click to expand...
Click to collapse
Just tried it and it FAILED please help?
mattybxda said:
Just tried it and it FAILED please help?
Click to expand...
Click to collapse
Ok so Im trying to flash to the new UK firmware now and see if it loads up if it does i will try replace the kernel to get root that way and report back.
mattybxda said:
Ok so Im trying to flash to the new UK firmware now and see if it loads up if it does i will try replace the kernel to get root that way and report back.
Click to expand...
Click to collapse
Didnt work guys , any ideas on what i can do now.
dr.ketan said:
I have read your post y'day, but have not replied b'coz, i was waiting for input.
As you have describe method is not safe, It will give you raise flash counter
here is review of one user from thread you have mentioned.
So just follow what chasmodo have advised you.
Click to expand...
Click to collapse
Hi dr ketan
Have you got any advice for me im stuck atm, my downgrade didnt work :'( it fails at the kernel part is there away around this?
mattybxda said:
Hi dr ketan
Have you got any advice for me im stuck atm, my downgrade didnt work :'( it fails at the kernel part is there away around this?
Click to expand...
Click to collapse
Do you have Sammy drivers installed on your PC? This is important. From Dr Ketan's guide:
"Install Kies on your computer, connect your phone and make sure that all the drivers installed correctly."
chasmodo said:
Do you have Sammy drivers installed on your PC? This is important. From Dr Ketan's guide:
"Install Kies on your computer, connect your phone and make sure that all the drivers installed correctly."
Click to expand...
Click to collapse
Yeh i have kies on the computer, all was working when i was using kies before.
I
'm tried a different firmware version now so once it downloads i hope it works fingers crossed anyways. If that doesnt any more ideas?
mattybxda said:
Yeh i have kies on the computer, all was working when i was using kies before.
I
'm tried a different firmware version now so once it downloads i hope it works fingers crossed anyways. If that doesnt any more ideas?
Click to expand...
Click to collapse
Yeah...try a different PC Odin version if it fails again.
chasmodo said:
Yeah...try a different PC Odin version if it fails again.
Click to expand...
Click to collapse
Thanks I will try that now I think i am also going to try uninstalling Kies then reinstalling it just as a per-caution. Will let ya know how i go.
mattybxda said:
Thanks I will try that now I think i am also going to try uninstalling Kies then reinstalling it just as a per-caution. Will let ya know how i go.
Click to expand...
Click to collapse
Also make sure that Kies is not running when you are PC Odining (ctrl+alt+del+end process).
chasmodo said:
Also make sure that Kies is not running when you are PC Odining (ctrl+alt+del+end process).
Click to expand...
Click to collapse
Thanks for the tip before about the process seemed to get further now.
Problem now it seems to be getting stuck at setup connection in odin?
the set that seems to be stuck is the setupconnection... should i just close odin and re-try?
mattybxda said:
Thanks for the tip before about the process seemed to get further now.
Problem now it seems to be getting stuck at setup connection in odin?
the set that seems to be stuck is the setupconnection... should i just close odin and re-try?
Click to expand...
Click to collapse
Did you start Odin first, then plug your Note into USB slot? Does Odin show the yellow field with the COM number in it?
chasmodo said:
Did you start Odin first, then plug your Note into USB slot? Does Odin show the yellow field with the COM number in it?
Click to expand...
Click to collapse
I have got the yellow com box wich on my computer says com4.
using odin v1.87 instead odin 1.85 like before.
using the firmware like u suggested to downgrade too as well.
seem to fail when it goes to boot.ini and the kernel section just fails there?
Think I should try flash a kernel or something?
mattybxda said:
I have got the yellow com box wich on my computer says com4.
using odin v1.87 instead odin 1.85 like before.
using the firmware like u suggested to downgrade too as well.
seem to fail when it goes to boot.ini and the kernel section just fails there?
Think I should try flash a kernel or something?
Click to expand...
Click to collapse
Don't know what else to suggest at this point. I'd leave it as it is and wait for Dr. Ketan to bail you out.
@Dr. Ketan:
Mum, help us, we're stuck here!

[Q] Bricked My Samsung Galaxy Ace GT-S5830i

I Just Bricked My Samsung Galaxy Ace - I Switch it On and It Shows Samsung Logo Forever and Im Stuck There. I Can Still Access Recovery and Download Mode Though
If Im Not Wrong, I Bricked It By Deleting Certain System Files, Is There A way to Restore The System Files via Download Mode or Recovery Mode ?
* I Deleted Samsungbootloop.qmg, And The Next time I Booted, This Happened. Could it Be A Cause ? I've Read other Forums About this File, and It Seems Like it Doesnt Brick the Phone If Deleted
Btw, My Phone Model Is GT-S5830i
U only shot is to flash through odin dont worry nothings wrong yet ...your phone is not even close to being bricked try rom manager and report rom manager is the best brick tool out there
Flash Through Odin ? You Mean Flash My Stock Firmware?
Try Rom Manager ? But I Cant Even Use The App on My Mobile?
Im Actually Quite New To Android, Cant Really Grasp What You're Saying
kyrogex said:
Flash Through Odin ? You Mean Flash My Stock Firmware?
Try Rom Manager ? But I Cant Even Use The App on My Mobile?
Im Actually Quite New To Android, Cant Really Grasp What You're Saying
Click to expand...
Click to collapse
I was just kidding dude
dont use Rom Manager it will brick your phone
Why dont u google a bit ? There are many Odin tutorials out there on you tube
Yes i mean u should flash your stock rom through odin ..
And dont worry we are here to help you ...so can u google?
Thanks For The Help So Far,
I Thought About Flashing My Stock Firmware, But Does it Include Restoring System Files?
Yea I Googled Before Opening This Thread
kyrogex said:
Thanks For The Help So Far,
I Thought About Flashing My Stock Firmware, But Does it Include Restoring System Files?
Yea I Googled Before Opening This Thread
Click to expand...
Click to collapse
Yes ...your system files will be restored but your data will get wiped off then again beggers cant be choosers ...
Download your stock rom at samfirmware.com ...odin youll find anywhere ...
Doesnt Matter, I Only Used My Phone For Abt 3 Wks Now... No Important Infomation Inside
Haha Cool! Got Odin v1.85 Working on My Computer, Just Wondering About The Firmwares... Does CSC and PDA Matter ?
So I've Connected My Phone To The Computer, While My Phone Is In Download Mode. My Computer Cant Seem to Install the Driver, Can I Still Use Odin ?
*Sorry I know I Ask Alot Of Qns, But I Just Wanna Be Extra Careful
No problem its good to be careful than be sorry
No u cant proceed until odin shows that "yellow box " .
About your pc not recognizng your phone you should have the samsung usb drivers ull find them at samfirmware.com
And also when u use odin u must "run as admin " or "run as vista executable( i hope u have seen some odin tutorial ) first keep odin open then connect your phone
I m sorry for the late replies...i know how excited/ sad u are ..please bear with me
You know you are rooted when you use XDA more than FB
I dont know about csc and pda . Whenever i flashed it was always a " one package " file ...google it ...dont worry u cant brick your phone via odin unless you flash a rom not meant for your phone xD
You know you are rooted when you use XDA more than FB
Dragonoid said:
U only shot is to flash through odin dont worry nothings wrong yet ...your phone is not even close to being bricked try rom manager and report rom manager is the best brick tool out there
Click to expand...
Click to collapse
why is rom manager on market etc. if it bricks? I even seen posts on this site people using it.
You Must Have Been In The Same Situation as I Am Right Now Before ( About The Excitement And All )
Your Right About That, Im Waiting For Your Replies, However Dont Feel Sorry... You're Already Helping Me ! And Its Not Like Waiting For Your Replies Are Unbearable. Im Guilty For Doing The Same Right? Replying Late
Yea It Does Come Out The Yellow Box, Odin Can Detect My Phone. But About The Firmware, Does CSC and PDA Matter?
kyrogex said:
You Must Have Been In The Same Situation as I Am Right Now Before ( About The Excitement And All )
Your Right About That, Im Waiting For Your Replies, However Dont Feel Sorry... You're Already Helping Me ! And Its Not Like Waiting For Your Replies Are Unbearable. Im Guilty For Doing The Same Right? Replying Late
Yea It Does Come Out The Yellow Box, Odin Can Detect My Phone. But About The Firmware, Does CSC and PDA Matter?
Click to expand...
Click to collapse
Dont think so use pda it sounds better
You know you are rooted when you use XDA more than FB
chrcol said:
why is rom manager on market etc. if it bricks? I even seen posts on this site people using it.
Click to expand...
Click to collapse
Rom Manager is compatible with some phones..not with Ace ...though i have heard that now the compatibilty is improved ...
I have bricked my phone using Rom manager too ( i was a noob then flashed the wrong recovery luckily for me the service centre guys repaired it for me ) ...
and i think you are late you have not seen the many threads that were here due to Rom manager bricking
You know you are rooted when you use XDA more than FB
-____- dude you could have googled check my screenshot and always always always remember
GOOGLE B4 YOU ASK SOMETHING
GOOGLE is your best friend
You are lucky i m in a good mood any other day i would have not cared to reply to such questions...
You know you are rooted when you use XDA more than FB
And read this if u want to know about any more terminology
http://galaxy551.wordpress.com/2012/01/08/the-stock-rom-and-odin-thread/
You know you are rooted when you use XDA more than FB
Lol Wow I Did Google Before I asked, Just That They Gave me A Bunch Of Stuff That my Brain Couldnt Comprehend
So Now, I Have Downloaded The Stock Firmware and It Seems Like There is Only One File, Unlike In Tutorials Which Have the CSC PDA MODEM File. So I Dont know How to Use The File in Odin.
I Have Seen Tutorials Where The Stock Firmware Consist Of One File Like Mine Also, Where They Input That One Big File Into The PDA Slot. However Mine Doesnt Seem To Work.
There Could Be Afew Outcomes While Flashing that One File into PDA with Odin ( The message in Odin, Telling me what it is doing currently)
1. Setup Connection... ( And Then Stucks There )
2. Flash Failure
Mind Helping Me Abit, Seems Disastrous Lol.. Much Thanks
I think yours is a "one package " file ...there is an option in odin ..tick it and navigate to the file
You know you are rooted when you use XDA more than FB
Dragonoid said:
I think yours is a "one package " file ...there is an option in odin ..tick it and navigate to the file
You know you are rooted when you use XDA more than FB
Click to expand...
Click to collapse
Agree. Put that file in the bottom right line and go on! You've almost done it.
I can't resist of asking you why are you using capital letters on every word?
Sent from my Ace using XDA
TheArt. said:
I can't resist of asking you why are you using capital letters on every word?
Sent from my Ace using XDA
Click to expand...
Click to collapse
Lol yeah i didnt notice that untill u pointed out
You know you are rooted when you use XDA more than FB
So I've Downloaded Many Versions Of Odin3 and Odin Multi Downloader Cause So Many Of Em Dont Work for Me
All Versions for Odin Multi Downloader ( Even 4.38, A Version For The Ace )
- Cant Detect My Phone
Odin3
- Has The Yellow Box When I Plug In Phone
- However, It Justs Stucks There Forever as The Message Says SetupConnection...
Lol Cause Typing Like These Looks Awesome To Me

Please help me

So im lost. I flashed the wrong rom and bricked my vzw tab. First time iv ever bricked any device unfortunately. How do i fix it? Odin? Im not boot looping and i cant get into recovery but i believe i can get into download mode. And advice and id be very thankful. Or do i have a new paperweight
Sent from my LG-LS970 using xda app-developers app
Odin/heimdall flash stock rom in download mode should take care of it.
Sent from my GT-P1000 using xda app-developers app
Thanks im.stressed because its not charging...that okay to odin on low batt
Sent from my LG-LS970 using xda app-developers app
so im working on this today and i cant get into download mode. i only see the phone and a computer with a orange triangle in the middle. i saw a video of how to fix it but i couldnt download the files. can anyone please point me to the right thread.
In that mode (secondary download mode) you should be able to flash if Odin detects.
Sometimes you need to keep trying until suddenly Odin detects it, and flash away.
priyana said:
In that mode (secondary download mode) you should be able to flash if Odin detects.
Sometimes you need to keep trying until suddenly Odin detects it, and flash away.
Click to expand...
Click to collapse
iv been messing with it all day and odin wont see it. any tricks?
Which file to flash?
priyana said:
In that mode (secondary download mode) you should be able to flash if Odin detects.
Sometimes you need to keep trying until suddenly Odin detects it, and flash away.
Click to expand...
Click to collapse
Hi priyana,
I do have the same problem with my Galaxy Tab GT-P1000 and I am getting the same screen.
Did flash my device with Odin but the wrong something cwm10.x , forgot which one I used (well done I know )
It is a Vodafone (Germany) Galaxy Tab 7 (GT-P1000).
May I ask some questions:
What do you mean with "flash it away" what do you suggest him to use for flashing?
What is it? A Recovery? A Bootloader ...? And where can one find/get it?
Stupid questions - I got confused while reading thousands of threads on different websites...
But anyway, I would be thankful if you could point me to the right file I could use to flash on my Galaxy Tab ...
Thanks
Hi Hotstart,
I mean flash a stock ROM in Odin once Odin see the tab.
One good complete ROM is gb-stock-save-v5 that Team Overcome packed together.
Follow my signature.
There is that and a PDF guide, you need the page 7 of it for what to put in Odin.
Not for ruthlessbeatle, as this is for GSM P1000 only.
Sent from my GT-P1000 using xda app-developers app
hotstart said:
Hi priyana,
I do have the same problem with my Galaxy Tab GT-P1000 and I am getting the same screen.
Did flash my device with Odin but the wrong something cwm10.x , forgot which one I used (well done I know )
It is a Vodafone (Germany) Galaxy Tab 7 (GT-P1000).
May I ask some questions:
What do you mean with "flash it away" what do you suggest him to use for flashing?
What is it? A Recovery? A Bootloader ...? And where can one find/get it?
Stupid questions - I got confused while reading thousands of threads on different websites...
But anyway, I would be thankful if you could point me to the right file I could use to flash on my Galaxy Tab ...
Thanks
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=1133590
this helped me a ton i was bricked and now im back kinda of. remember read everything 2 twice if you have to. i could use a hand again though im back to bootlooping at the vzw screen after i used the link above. i wiped after flash but still bootlooping. its not cuz i converted to ext4 because i saw others who had converted and didnt have a problem. any advice on how i get this bad boy to spot boot looping thanks
priyana said:
Hi Hotstart,
I mean flash a stock ROM in Odin once Odin see the tab.
One good complete ROM is gb-stock-save-v5 that Team Overcome packed together.
Follow my signature.
There is that and a PDF guide, you need the page 7 of it for what to put in Odin.
Click to expand...
Click to collapse
Hi priyana,
thank you for your advice!
Currently I am stuck because in the middle of the flashing process the tab switched off maybe due to a low battery.
But is starting with the secondary download screen again - so I am hoping to be able to load it bit better for the next try.
Will let you know whatever outcome there will be.
Cheers

[Q?] URGENT Help with Soft Brick!!

Help me out guys i really need save my phone.
i have been trying to update my 2.3.6 to 4.3 (Jellybean) through Odin since I always got some weird stopping at 69% on Kies, but i seemed to fail on odin, Odin was failing to do it so i tried other odin ver and got stuck on the ''NAND Write Start'' thing, i exited odin and then tried something else i'm very stupid so i used a pit for the wrong version of my android to..help in whatever it was i dont remember, together with the ROM.
i didn't check if my phone was aleadry bricked after i force closed odin in patching in the first time so i don't know the root of the problem.
and i don't know if this is Soft or full brick but i get stuck at Firmware Upgrade encountered a issue, Kies does not help in it when i type the cellphone info into that option, it gives me a error so no way through kies. i didn't do any way yet to try to save it i'm really unsure what to do i checked really a bunch of different posts so its really confusing, i really get in panic when stuff like this happens so forgive me, i hope anyone can help in somehow, also, if better i need to save it in a way without having to wipe my stuff because most of my apps data are in the phone, but i dont mind if theres no other way than using wiping in one of the steps.
i don't really know how to follow if you link me over a thread so its better if you post the explanation here.
Icarusu said:
Help me out guys i really need save my phone.
i have been trying to update my 2.3.6 to 4.3 (Jellybean) through Odin since I always got some weird stopping at 69% on Kies, but i seemed to fail on odin, Odin was failing to do it so i tried other odin ver and got stuck on the ''NAND Write Start'' thing, i exited odin and then tried something else i'm very stupid so i used a pit for the wrong version of my android to..help in whatever it was i dont remember, together with the ROM.
i didn't check if my phone was aleadry bricked after i force closed odin in patching in the first time so i don't know the root of the problem.
and i don't know if this is Soft or full brick but i get stuck at Firmware Upgrade encountered a issue, Kies does not help in it when i type the cellphone info into that option, it gives me a error so no way through kies. i didn't do any way yet to try to save it i'm really unsure what to do i checked really a bunch of different posts so its really confusing, i really get in panic when stuff like this happens so forgive me, i hope anyone can help in somehow, also, if better i need to save it in a way without having to wipe my stuff because most of my apps data are in the phone, but i dont mind if theres no other way than using wiping in one of the steps.
i don't really know how to follow if you link me over a thread so its better if you post the explanation here.
Click to expand...
Click to collapse
if better i need to save it in a way without having to wipe my stuff
Click to expand...
Click to collapse
You must do factory reset when you go from GB to JB. That is why you get a bootloop probably.
So to make it short situations is like this:
1. You had problem with Kies
2. Tried with Odin and got force close of odin in Windows?
3. Retry with Kies with same ending
So what Windows do you use? Do you use 8? I read some had problem with Odin and 8.x. Did you use Odin 3.0.x?
shut_down said:
You must do factory reset when you go from GB to JB. That is why you get a bootloop probably.
So to make it short situations is like this:
1. You had problem with Kies
2. Tried with Odin and got force close of odin in Windows?
3. Retry with Kies with same ending
So what Windows do you use? Do you use 8? I read some had problem with Odin and 8.x. Did you use Odin 3.0.x?
Click to expand...
Click to collapse
Yeah, forced closed odin 2 times, kies like stopped and disconnected everything on 69% leaving only the android on downloading screen but that didnt brick it, i use windows 7, odin 3.09 only gave me fails so i used 3.07 where it got stuck on nand thing.
also, any ways to backup things even though the thing is bricked? i can go to download mode fine and i think i can go into recovery too (never tried it on this phone)
Icarusu said:
Yeah, forced closed odin 2 times, kies like stopped and disconnected everything on 69% leaving only the android on downloading screen but that didnt brick it, i use windows 7, odin 3.09 only gave me fails so i used 3.07 where it got stuck on nand thing.
also, any ways to backup things even though the thing is bricked? i can go to download mode fine and i think i can go into recovery too (never tried it on this phone)
Click to expand...
Click to collapse
Your internal data (on internal SD) will be there, but Factory reset will delete your apps and its data.
Or try to flash GB with ODIN and see what happens.
shut_down said:
Your internal data (on internal SD) will be there, but Factory reset will delete your apps and its data.
Or try to flash GB with ODIN and see what happens.
Click to expand...
Click to collapse
ehh give me a tutorial of what to do to unbrick it. i really need unbrick it. its a soft brick or full brick?
Icarusu said:
ehh give me a tutorial of what to do to unbrick it. i really need unbrick it. its a soft brick or full brick?
Click to expand...
Click to collapse
It is probably soft, you can go to Odin. Way to unbrick it is to flash stock firmware with Odin - like you did. Find GB firmware and flash it with odin like you did.
http://forum.xda-developers.com/showthread.php?t=1985398
If your phone is I9070 then use firmware for I9070, if it is I9070P use I9070P firmware. If you miss this you will hardbrick phone, and not be able to use Download mode.
And do not use Hong Kong firmware.
sammobile.com and samsung-updates.com are sites where you can find firmwares.
You were on custom ROM when you did update with Kies?
shut_down said:
It is probably soft, you can go to Odin. Way to unbrick it is to flash stock firmware with Odin - like you did. Find GB firmware and flash it with odin like you did.
http://forum.xda-developers.com/showthread.php?t=1985398
If your phone is I9070 then use firmware for I9070, if it is I9070P use I9070P firmware. If you miss this you will hardbrick phone, and not be able to use Download mode.
And do not use Hong Kong firmware.
sammobile.com and samsung-updates.com are sites where you can find firmwares.
You were on custom ROM when you did update with Kies?
Click to expand...
Click to collapse
no i wasnt
also
any of those are of my region does it matter? will i get stuck in nando writing if i try this with a GB firmware?
Icarusu said:
no i wasnt
also
any of those are of my region does it matter? will i get stuck in nando writing if i try this with a GB firmware?
Click to expand...
Click to collapse
Use region next to you, I am using Italian and I am from Serbia. I do not know if you will get nand write error, you should not get it in first place. Maybe something is wrong with it...
shut_down said:
Use region next to you, I am using Italian and I am from Serbia. I do not know if you will get nand write error, you should not get it in first place. Maybe something is wrong with it...
Click to expand...
Click to collapse
Hm, alright i'll use one firmware
but what if i get the nand thing and has to force close odin again? will i get fullbrick?
Icarusu said:
Hm, alright i'll use one firmware
but what if i get the nand thing and has to force close odin again? will i get fullbrick?
Click to expand...
Click to collapse
I am not 100% sure about that. Maybe try other ODIN versions. But I used 3.0.7 without problem. Search for nand write problem to see what is it about.
P.S. Redownlaod firmware maybe, is it the same size as shown on the page when you started download?
shut_down said:
I am not 100% sure about that. Maybe try other ODIN versions. But I used 3.0.7 without problem. Search for nand write problem to see what is it about.
P.S. Redownlaod firmware maybe, is it the same size as shown on the page when you started download?
Click to expand...
Click to collapse
Yeah um it was, as i said Odin 3.09 only failed while 3.07 got stuck in nando. isnt there someone that knows about that nando thing? i readed alot but i dont think i can really find a good answer.
alright so, downloaded a 2.3.6 firmware, i download which odin? i do need download that ''odin tools'' from that link you linked me ? because it has a very old ver of odin but skipping that it has a PIT file that i dont really know what it is for.
Icarusu said:
Yeah um it was, as i said Odin 3.09 only failed while 3.07 got stuck in nando. isnt there someone that knows about that nando thing? i readed alot but i dont think i can really find a good answer.
alright so, downloaded a 2.3.6 firmware, i download which odin? i do need download that ''odin tools'' from that link you linked me ? because it has a very old ver of odin but skipping that it has a PIT file that i dont really know what it is for.
Click to expand...
Click to collapse
Sorry, use this for downgrade: http://forum.xda-developers.com/showthread.php?t=2195673
I think no matter what Odin. I used 3.07 without any problems so far.
shut_down said:
Sorry, use this for downgrade: http://forum.xda-developers.com/showthread.php?t=2195673
I think no matter what Odin. I used 3.07 without any problems so far.
Click to expand...
Click to collapse
downgrade? i was updating from 2.3.6 to Jelly bean when i bricked. i dont know if i even got to jelly bean when i bricked.
jumping to a downgrade subject of sudden is abit weird..i was just going flash it with the same version of my android and see if it would work.
do i need really to folow that method or i can keep going and flash it how you told me to?
Icarusu said:
downgrade? i was updating from 2.3.6 to Jelly bean when i bricked. i dont know if i even got to jelly bean when i bricked.
jumping to a downgrade subject of sudden is abit weird..i was just going flash it with the same version of my android and see if it would work.
do i need really to folow that method or i can keep going and flash it how you told me to?
Click to expand...
Click to collapse
Follow the whole procedure from that thread. Except the part of 16GB version, if you do not have one.
shut_down said:
Follow the whole procedure from that thread. Except the part of 16GB version, if you do not have one.
Click to expand...
Click to collapse
alright i'll do it just tell me if theres any way to backup my storage from my soft bricked cellphone because some of my stuff was in the internal storage.
Icarusu said:
alright i'll do it just tell me if theres any way to backup my storage from my soft bricked cellphone because some of my stuff was in the internal storage.
Click to expand...
Click to collapse
I am not sure if that method formats internal storage. And if you get adb shell you could do it with command or with total commander with adb plugin (for that go to my profile, to all threads I started and you will see one about it).
shut_down said:
I am not sure if that method formats internal storage. And if you get adb shell you could do it with command or with total commander with adb plugin (for that go to my profile, to all threads I started and you will see one about it).
Click to expand...
Click to collapse
mm tried adb well it dont detect it since its bricked it only turns off android to the firmware upgrade screen thing. well i'll use the method now. wish me luck
shut_down said:
I am not sure if that method formats internal storage. And if you get adb shell you could do it with command or with total commander with adb plugin (for that go to my profile, to all threads I started and you will see one about it).
Click to expand...
Click to collapse
Oh, well it worked, thanks.
still, its all gone now but i can install each app again, there wasn't much important things that i lost.
well since its normal again but without nothing, when i decide to try update it again which way you would recommend me off? i mean, a really good one that isnt by Kies?
Icarusu said:
Oh, well it worked, thanks.
still, its all gone now but i can install each app again, there wasn't much important things that i lost.
well since its normal again but without nothing, when i decide to try update it again which way you would recommend me off? i mean, a really good one that isnt by Kies?
Click to expand...
Click to collapse
Odin. Like you did now, just with JB firmware for your I9070 model (P or non P, if you miss that you will hard brick, for example if you flash P firmware on non P phone, and otherwise).
Just follow this http://forum.xda-developers.com/showthread.php?t=1985398
Simple as - put firmware in PDA, hit flash. And check if you have unchecked/checked as it is written there.
Probably Kies was the problem, because that nand write error. He messed up, and now this fixed it.
shut_down said:
Odin. Like you did now, just with JB firmware for your I9070 model (P or non P, if you miss that you will hard brick, for example if you flash P firmware on non P phone, and otherwise).
Just follow this http://forum.xda-developers.com/showthread.php?t=1985398
Simple as - put firmware in PDA, hit flash. And check if you have unchecked/checked as it is written there.
Probably Kies was the problem, because that nand write error. He messed up, and now this fixed it.
Click to expand...
Click to collapse
mmm. alright so i should get the jelly bean firmware from that website then use it on odin as its listed. should i use the odin listed in that thread or any ver. will do? any region will work?

Categories

Resources