I Just Bricked My Samsung Galaxy Ace - I Switch it On and It Shows Samsung Logo Forever and Im Stuck There. I Can Still Access Recovery and Download Mode Though
If Im Not Wrong, I Bricked It By Deleting Certain System Files, Is There A way to Restore The System Files via Download Mode or Recovery Mode ?
* I Deleted Samsungbootloop.qmg, And The Next time I Booted, This Happened. Could it Be A Cause ? I've Read other Forums About this File, and It Seems Like it Doesnt Brick the Phone If Deleted
Btw, My Phone Model Is GT-S5830i
U only shot is to flash through odin dont worry nothings wrong yet ...your phone is not even close to being bricked try rom manager and report rom manager is the best brick tool out there
Flash Through Odin ? You Mean Flash My Stock Firmware?
Try Rom Manager ? But I Cant Even Use The App on My Mobile?
Im Actually Quite New To Android, Cant Really Grasp What You're Saying
kyrogex said:
Flash Through Odin ? You Mean Flash My Stock Firmware?
Try Rom Manager ? But I Cant Even Use The App on My Mobile?
Im Actually Quite New To Android, Cant Really Grasp What You're Saying
Click to expand...
Click to collapse
I was just kidding dude
dont use Rom Manager it will brick your phone
Why dont u google a bit ? There are many Odin tutorials out there on you tube
Yes i mean u should flash your stock rom through odin ..
And dont worry we are here to help you ...so can u google?
Thanks For The Help So Far,
I Thought About Flashing My Stock Firmware, But Does it Include Restoring System Files?
Yea I Googled Before Opening This Thread
kyrogex said:
Thanks For The Help So Far,
I Thought About Flashing My Stock Firmware, But Does it Include Restoring System Files?
Yea I Googled Before Opening This Thread
Click to expand...
Click to collapse
Yes ...your system files will be restored but your data will get wiped off then again beggers cant be choosers ...
Download your stock rom at samfirmware.com ...odin youll find anywhere ...
Doesnt Matter, I Only Used My Phone For Abt 3 Wks Now... No Important Infomation Inside
Haha Cool! Got Odin v1.85 Working on My Computer, Just Wondering About The Firmwares... Does CSC and PDA Matter ?
So I've Connected My Phone To The Computer, While My Phone Is In Download Mode. My Computer Cant Seem to Install the Driver, Can I Still Use Odin ?
*Sorry I know I Ask Alot Of Qns, But I Just Wanna Be Extra Careful
No problem its good to be careful than be sorry
No u cant proceed until odin shows that "yellow box " .
About your pc not recognizng your phone you should have the samsung usb drivers ull find them at samfirmware.com
And also when u use odin u must "run as admin " or "run as vista executable( i hope u have seen some odin tutorial ) first keep odin open then connect your phone
I m sorry for the late replies...i know how excited/ sad u are ..please bear with me
You know you are rooted when you use XDA more than FB
I dont know about csc and pda . Whenever i flashed it was always a " one package " file ...google it ...dont worry u cant brick your phone via odin unless you flash a rom not meant for your phone xD
You know you are rooted when you use XDA more than FB
Dragonoid said:
U only shot is to flash through odin dont worry nothings wrong yet ...your phone is not even close to being bricked try rom manager and report rom manager is the best brick tool out there
Click to expand...
Click to collapse
why is rom manager on market etc. if it bricks? I even seen posts on this site people using it.
You Must Have Been In The Same Situation as I Am Right Now Before ( About The Excitement And All )
Your Right About That, Im Waiting For Your Replies, However Dont Feel Sorry... You're Already Helping Me ! And Its Not Like Waiting For Your Replies Are Unbearable. Im Guilty For Doing The Same Right? Replying Late
Yea It Does Come Out The Yellow Box, Odin Can Detect My Phone. But About The Firmware, Does CSC and PDA Matter?
kyrogex said:
You Must Have Been In The Same Situation as I Am Right Now Before ( About The Excitement And All )
Your Right About That, Im Waiting For Your Replies, However Dont Feel Sorry... You're Already Helping Me ! And Its Not Like Waiting For Your Replies Are Unbearable. Im Guilty For Doing The Same Right? Replying Late
Yea It Does Come Out The Yellow Box, Odin Can Detect My Phone. But About The Firmware, Does CSC and PDA Matter?
Click to expand...
Click to collapse
Dont think so use pda it sounds better
You know you are rooted when you use XDA more than FB
chrcol said:
why is rom manager on market etc. if it bricks? I even seen posts on this site people using it.
Click to expand...
Click to collapse
Rom Manager is compatible with some phones..not with Ace ...though i have heard that now the compatibilty is improved ...
I have bricked my phone using Rom manager too ( i was a noob then flashed the wrong recovery luckily for me the service centre guys repaired it for me ) ...
and i think you are late you have not seen the many threads that were here due to Rom manager bricking
You know you are rooted when you use XDA more than FB
-____- dude you could have googled check my screenshot and always always always remember
GOOGLE B4 YOU ASK SOMETHING
GOOGLE is your best friend
You are lucky i m in a good mood any other day i would have not cared to reply to such questions...
You know you are rooted when you use XDA more than FB
And read this if u want to know about any more terminology
http://galaxy551.wordpress.com/2012/01/08/the-stock-rom-and-odin-thread/
You know you are rooted when you use XDA more than FB
Lol Wow I Did Google Before I asked, Just That They Gave me A Bunch Of Stuff That my Brain Couldnt Comprehend
So Now, I Have Downloaded The Stock Firmware and It Seems Like There is Only One File, Unlike In Tutorials Which Have the CSC PDA MODEM File. So I Dont know How to Use The File in Odin.
I Have Seen Tutorials Where The Stock Firmware Consist Of One File Like Mine Also, Where They Input That One Big File Into The PDA Slot. However Mine Doesnt Seem To Work.
There Could Be Afew Outcomes While Flashing that One File into PDA with Odin ( The message in Odin, Telling me what it is doing currently)
1. Setup Connection... ( And Then Stucks There )
2. Flash Failure
Mind Helping Me Abit, Seems Disastrous Lol.. Much Thanks
I think yours is a "one package " file ...there is an option in odin ..tick it and navigate to the file
You know you are rooted when you use XDA more than FB
Dragonoid said:
I think yours is a "one package " file ...there is an option in odin ..tick it and navigate to the file
You know you are rooted when you use XDA more than FB
Click to expand...
Click to collapse
Agree. Put that file in the bottom right line and go on! You've almost done it.
I can't resist of asking you why are you using capital letters on every word?
Sent from my Ace using XDA
TheArt. said:
I can't resist of asking you why are you using capital letters on every word?
Sent from my Ace using XDA
Click to expand...
Click to collapse
Lol yeah i didnt notice that untill u pointed out
You know you are rooted when you use XDA more than FB
So I've Downloaded Many Versions Of Odin3 and Odin Multi Downloader Cause So Many Of Em Dont Work for Me
All Versions for Odin Multi Downloader ( Even 4.38, A Version For The Ace )
- Cant Detect My Phone
Odin3
- Has The Yellow Box When I Plug In Phone
- However, It Justs Stucks There Forever as The Message Says SetupConnection...
Lol Cause Typing Like These Looks Awesome To Me
Related
Hey guys ive been trying to get all i need to flash xxjpy firmware just one question?
i saw (by complete accident i might add) a guide to ''how to flash with odin'' and the guy or whatever said i need an unlocked sgs - simlock free phone as it wer, is that true? Mine is a branded vodafone 100% locked on it. Will something unspeakable happen if i try to flash it this way? (Brand new phone so im kinda nervous)
Any help may be exchanged for sexual favors xD
ps: Only hot women are elligible for the above
It's probably safer to unlock your phone before you flash it using ODIN, for obvious reasons..
P.S. I pass on thy offer.
EDIT: To unlock your phone, try this tool: http://forum.xda-developers.com/showthread.php?t=803682
So i should unlock then flash with odin......ok
one last questio Is it a permanent unlock or is it more like the iphone ultrasn0w type of deal? which needs to be unlocked everytime you update/restore?
Might be easier just to reg hack kies to get xxjpy?
jgclifton said:
Might be easier just to reg hack kies to get xxjpy?
Click to expand...
Click to collapse
Its not like i diddnt think of that, i wanted the bujp5 modem
So.... im on froyo, need to backup my rom(warranty reason if i screw anything up) before i unlock and root the phone can i do that without flashing with odin?
calexus1182 said:
Its not like i diddnt think of that, i wanted the bujp5 modem
So.... im on froyo, need to backup my rom(warranty reason if i screw anything up) before i unlock and root the phone can i do that without flashing with odin?
Click to expand...
Click to collapse
which rom version are you on now ? you can always get the same version from samfirmware.com(you need to sign up to d/l the firmware) that your currently on.
If you really need to back up your rom then you'll need ROM manager & the phone needs to be rooted as well, the easiest way is to use One click root.
You don't need to have an unlocked/unbranded phone to use odin, you just need to have kies installed for the usb drivers & for kies to be exited whilst using odin.
Here is a pretty good guide for how to use odin, take you time read it throughly, make sure you understand it & remember your doing this at your own risk
calexus1182 said:
Its not like i diddnt think of that, i wanted the bujp5 modem
So.... im on froyo, need to backup my rom(warranty reason if i screw anything up) before i unlock and root the phone can i do that without flashing with odin?
Click to expand...
Click to collapse
If its just the modem your after check Docs thread he has a list of modems for download.
where can i find th csc files you know the ususal bloatware crap?
calexus1182 said:
where can i find th csc files you know the ususal bloatware crap?
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=787163
tragusman said:
http://forum.xda-developers.com/showthread.php?t=787163
Click to expand...
Click to collapse
Thanks With this im all set right? If for any reason i have to take it to the store for repair or whatever
Well ive done it sgs is stuck on the blackscreen right after booting animation GAAHHHH
I sent it into warranty because I removed the data cable while it was flashing (Odin Multi Downloader (Android) was writing in the black box and it was stuck at MIBIB)
It had 2.3.6 XWHTH/XWKT4 installed.
When I recieved it I noticed it has 2.2.1 XXKB1/XWKA8. When connected to ODIN, it detects it, it adds it but in the black box mentioned above is still Odin Multi Downloader (Android)
I am afraid to start the update because .. you know.. I don't wanna send it again 300 miles away from here.
Is it safe to proceed?
ODIN v4.38
Tass v.1.0
.tar/.md5 file OK
:angel:
why not use the Odin created for galaxy mini which show gt-s5570
... Can you explain me.. A little more.. Like a link or something? :/
Sent from my GT-S5570 using xda app-developers app
I guess this Tutorial (http://forum.xda-developers.com/showthread.php?t=1255305) should be fair enough.
Follow the steps as mentioned there, with your current downloaded firmware.
coolsandie said:
I guess this Tutorial (http://forum.xda-developers.com/showthread.php?t=1255305) should be fair enough.
Follow the steps as mentioned there, with your current downloaded firmware.
Click to expand...
Click to collapse
Well... This is happening on my screen, it is the same like when the update failed.
I just want to know If I will not wreck my phone if I go with it.
www.flickr.com/photos/[email protected]3/7703931556/
Ginga:| said:
Well... This is happening on my screen, it is the same like when the update failed.
I just want to know If I will not wreck my phone if I go with it.
www.flickr.com/photos/[email protected]/7703931556/
Click to expand...
Click to collapse
I guess it fine, whether it shows Android or GT-S5570 (happened to me at times) Just use Tass_v1.0.ops and the one package system, your screenshot looks fine.
Just check whether your downloaded firmware is good, just try extracting.
Even I got the same error that you've mentioned in your first post, that MIBIB error message. Just try again. If it doesn't work download another version and try flashing it.
EDIT: Probably you won't brick your device because Odin will not flash the firmware past that MIBIB error.
Sorry for the long thread but please read and help me !
Sorry moderators i tried looking for my post didnt find where you placed it. so making a new and clear where i'll tell what i ve done to my tablet.
firstly my p1000 was froyo 2.2 and i didnt checked that and tried to upgrade it to jelly bean, that was the first stupidity of my.
while doing that i faced many problems and concluded that it was brick.
how ever i had rooted my phone with super one click root..
later when it was bricked i again rooted it with cwm recovery by help of cmd.
then it was more complex, i then tried to roll it back and installed the firmware but the firmware i installed was wrong region again it went more complex.
then from some thread, i again used odin and pit it and installed some other firmware. that didnt work so i did something with heimdall suite as it was instructed and mess something with zImage thing.. all failed.
now i ve finally came up with no solution and thinking what the mess i ve done.
please help me.
now odin dont recognize the phone.
the phone is booting till the samsung welcome screen i can also listen the sound.
it also goes to cwm recovery screen and also goes to downloading screen.
please tell me a way so that it can go to normal i am happy with 2.2 froyo only.
tell me a way, please give me download links so that i dont mess it again.
remember odin not accepting it, i ve charged the phone fully and also installed the samsung usb drivers but its not helping..
Follow the link in my signature.
Download the guide and gb stock safe.
Jump to page 7.
Go to download mode. Connect cable. Start Odin.
You may want to remove zadig/heimdall if possible.
Better if you can get a clean PC and install driver from gb stock safe.
Sent from my GT-P1000 using xda app-developers app
yes, i am sure it is because of heimdall suite,..
thanks a lot you are so helping i will be posting here only now
Your post was within another thread two from the top of this forum with you as the last poster but don't worry any more. As you've now created a new thread which is much clearer I've deleted the other posts so that all your questions and can answers on this subject can be kept together here.
Thanks
AvRS
AvRS said:
Your post was within another thread two from the top of this forum with you as the last poster but don't worry any more. As you've now created a new thread which is much clearer I've deleted the other posts so that all your questions and can answers on this subject can be kept together here.
Thanks
AvRS
Click to expand...
Click to collapse
i am really really sorry for all the inconvenience ,
i was a bit shocked as my tablet got bricked, so made such silly posts and created the problems.
but thanks for understanding my conditions.
priyana said:
Follow the link in my signature.
Download the guide and gb stock safe.
Jump to page 7.
Go to download mode. Connect cable. Start Odin.
You may want to remove zadig/heimdall if possible.
Better if you can get a clean PC and install driver from gb stock safe.
Sent from my GT-P1000 using xda app-developers app
Click to expand...
Click to collapse
i would like to give you a big big big thanks for helping me out..
this forum is the best forum over the web as i got my problem solved,
not only helped me to unbrick my tablet but also now its upgraded to 4.1 jelly beans.
Priyana without you my tablet would be ended with a hard brick.
Thanks a lot.
No network !!
after all the hard work and all flashing thing, i upgraded it to Android 4.1.1 Jelly Bean via CyanogenMod 10
but now the problem is i cant find the network ..
Are-you talking about wifi? If so, check this thread: http://forum.xda-developers.com/showthread.php?t=1874634&highlight=modem+bin
glussier said:
Are-you talking about wifi? If so, check this thread: http://forum.xda-developers.com/showthread.php?t=1874634&highlight=modem+bin
Click to expand...
Click to collapse
i am sorry for not being clear, i was talking about the mobile network.
i searched on forum, and what i understand is i have to copy modem.bin file to data/vendor.
but i dont know which modem file to copy.
You can extract modem.bin from the rom that you have downloaded.
uryv
glussier said:
You can extract modem.bin from the rom that you have downloaded.
Click to expand...
Click to collapse
i did that... but still not able to make any calls. my sim card is working on other phone though.
have tried flashing modem.bin and also tried copy and paste in vendor folder.
but its not working searching all over the forum but i dont know what to do
Settings>about tablet>Status> Service state : out of service / Mobile network state : disconnected / MDN : unknown
Where did you get the modem.bin from and which network you belong to.
I recommend starting by looking at gb stock safe, when you unpack there are a few modem.bin
Start with JPZ modem and stick it in /radio/ if latest cm10
Or to /system/vendor for slightly older one.
Sent from my GT-I9300 using xda app-developers app
priyana said:
Where did you get the modem.bin from and which network you belong to.
I recommend starting by looking at gb stock safe, when you unpack there are a few modem.bin
Start with JPZ modem and stick it in /radio/ if latest cm10
Or to /system/vendor for slightly older one.
Sent from my GT-I9300 using xda app-developers app
Click to expand...
Click to collapse
in gb stock safe, it was jpz modem file.. which i used to flash and it was flashed very well and there was no problem in anything.
later on when i upgraded for 4.1.1 it was also installed normally with no problem the only problem i encountered is i cant make any calls from it.
even the imei number is changed of my phone.
i also sticked the file in system/vendor .. i tried with the both file the jpz which i had from gb stock file and another from the firmware.
well now i trying to go for the latest cyanogen 4.1.1 hope everything get normal in it, and try to stick file in radio.
can you tell me particularly which file to copy and where ?
in gb stock jpz worked fine.. should i go for it ?
yes the same jpz modem.bin file into /radio/modem.bin
the one in the CM10 might be corrupted, who knows.
priyana said:
yes the same jpz modem.bin file into /radio/modem.bin
the one in the CM10 might be corrupted, who knows.
Click to expand...
Click to collapse
hmm yea you were right.. and it was stupid of me i was using a old version cyanogen.. it downloaded the latest nightly and it worked fine..
but i think something google apps that.. the apps are limited as earlier i used to keep on scrolling and the apps list was like infinite now it seems as there are just 200 apps in it..
give me a link of latest gapps file plzz
Gapps only a few apps in it.
http://goo.im/gapps
Choose correctly, ics or jb.
Sent from my GT-P1000 using xda app-developers app
So im lost. I flashed the wrong rom and bricked my vzw tab. First time iv ever bricked any device unfortunately. How do i fix it? Odin? Im not boot looping and i cant get into recovery but i believe i can get into download mode. And advice and id be very thankful. Or do i have a new paperweight
Sent from my LG-LS970 using xda app-developers app
Odin/heimdall flash stock rom in download mode should take care of it.
Sent from my GT-P1000 using xda app-developers app
Thanks im.stressed because its not charging...that okay to odin on low batt
Sent from my LG-LS970 using xda app-developers app
so im working on this today and i cant get into download mode. i only see the phone and a computer with a orange triangle in the middle. i saw a video of how to fix it but i couldnt download the files. can anyone please point me to the right thread.
In that mode (secondary download mode) you should be able to flash if Odin detects.
Sometimes you need to keep trying until suddenly Odin detects it, and flash away.
priyana said:
In that mode (secondary download mode) you should be able to flash if Odin detects.
Sometimes you need to keep trying until suddenly Odin detects it, and flash away.
Click to expand...
Click to collapse
iv been messing with it all day and odin wont see it. any tricks?
Which file to flash?
priyana said:
In that mode (secondary download mode) you should be able to flash if Odin detects.
Sometimes you need to keep trying until suddenly Odin detects it, and flash away.
Click to expand...
Click to collapse
Hi priyana,
I do have the same problem with my Galaxy Tab GT-P1000 and I am getting the same screen.
Did flash my device with Odin but the wrong something cwm10.x , forgot which one I used (well done I know )
It is a Vodafone (Germany) Galaxy Tab 7 (GT-P1000).
May I ask some questions:
What do you mean with "flash it away" what do you suggest him to use for flashing?
What is it? A Recovery? A Bootloader ...? And where can one find/get it?
Stupid questions - I got confused while reading thousands of threads on different websites...
But anyway, I would be thankful if you could point me to the right file I could use to flash on my Galaxy Tab ...
Thanks
Hi Hotstart,
I mean flash a stock ROM in Odin once Odin see the tab.
One good complete ROM is gb-stock-save-v5 that Team Overcome packed together.
Follow my signature.
There is that and a PDF guide, you need the page 7 of it for what to put in Odin.
Not for ruthlessbeatle, as this is for GSM P1000 only.
Sent from my GT-P1000 using xda app-developers app
hotstart said:
Hi priyana,
I do have the same problem with my Galaxy Tab GT-P1000 and I am getting the same screen.
Did flash my device with Odin but the wrong something cwm10.x , forgot which one I used (well done I know )
It is a Vodafone (Germany) Galaxy Tab 7 (GT-P1000).
May I ask some questions:
What do you mean with "flash it away" what do you suggest him to use for flashing?
What is it? A Recovery? A Bootloader ...? And where can one find/get it?
Stupid questions - I got confused while reading thousands of threads on different websites...
But anyway, I would be thankful if you could point me to the right file I could use to flash on my Galaxy Tab ...
Thanks
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=1133590
this helped me a ton i was bricked and now im back kinda of. remember read everything 2 twice if you have to. i could use a hand again though im back to bootlooping at the vzw screen after i used the link above. i wiped after flash but still bootlooping. its not cuz i converted to ext4 because i saw others who had converted and didnt have a problem. any advice on how i get this bad boy to spot boot looping thanks
priyana said:
Hi Hotstart,
I mean flash a stock ROM in Odin once Odin see the tab.
One good complete ROM is gb-stock-save-v5 that Team Overcome packed together.
Follow my signature.
There is that and a PDF guide, you need the page 7 of it for what to put in Odin.
Click to expand...
Click to collapse
Hi priyana,
thank you for your advice!
Currently I am stuck because in the middle of the flashing process the tab switched off maybe due to a low battery.
But is starting with the secondary download screen again - so I am hoping to be able to load it bit better for the next try.
Will let you know whatever outcome there will be.
Cheers
Help me out guys i really need save my phone.
i have been trying to update my 2.3.6 to 4.3 (Jellybean) through Odin since I always got some weird stopping at 69% on Kies, but i seemed to fail on odin, Odin was failing to do it so i tried other odin ver and got stuck on the ''NAND Write Start'' thing, i exited odin and then tried something else i'm very stupid so i used a pit for the wrong version of my android to..help in whatever it was i dont remember, together with the ROM.
i didn't check if my phone was aleadry bricked after i force closed odin in patching in the first time so i don't know the root of the problem.
and i don't know if this is Soft or full brick but i get stuck at Firmware Upgrade encountered a issue, Kies does not help in it when i type the cellphone info into that option, it gives me a error so no way through kies. i didn't do any way yet to try to save it i'm really unsure what to do i checked really a bunch of different posts so its really confusing, i really get in panic when stuff like this happens so forgive me, i hope anyone can help in somehow, also, if better i need to save it in a way without having to wipe my stuff because most of my apps data are in the phone, but i dont mind if theres no other way than using wiping in one of the steps.
i don't really know how to follow if you link me over a thread so its better if you post the explanation here.
Icarusu said:
Help me out guys i really need save my phone.
i have been trying to update my 2.3.6 to 4.3 (Jellybean) through Odin since I always got some weird stopping at 69% on Kies, but i seemed to fail on odin, Odin was failing to do it so i tried other odin ver and got stuck on the ''NAND Write Start'' thing, i exited odin and then tried something else i'm very stupid so i used a pit for the wrong version of my android to..help in whatever it was i dont remember, together with the ROM.
i didn't check if my phone was aleadry bricked after i force closed odin in patching in the first time so i don't know the root of the problem.
and i don't know if this is Soft or full brick but i get stuck at Firmware Upgrade encountered a issue, Kies does not help in it when i type the cellphone info into that option, it gives me a error so no way through kies. i didn't do any way yet to try to save it i'm really unsure what to do i checked really a bunch of different posts so its really confusing, i really get in panic when stuff like this happens so forgive me, i hope anyone can help in somehow, also, if better i need to save it in a way without having to wipe my stuff because most of my apps data are in the phone, but i dont mind if theres no other way than using wiping in one of the steps.
i don't really know how to follow if you link me over a thread so its better if you post the explanation here.
Click to expand...
Click to collapse
if better i need to save it in a way without having to wipe my stuff
Click to expand...
Click to collapse
You must do factory reset when you go from GB to JB. That is why you get a bootloop probably.
So to make it short situations is like this:
1. You had problem with Kies
2. Tried with Odin and got force close of odin in Windows?
3. Retry with Kies with same ending
So what Windows do you use? Do you use 8? I read some had problem with Odin and 8.x. Did you use Odin 3.0.x?
shut_down said:
You must do factory reset when you go from GB to JB. That is why you get a bootloop probably.
So to make it short situations is like this:
1. You had problem with Kies
2. Tried with Odin and got force close of odin in Windows?
3. Retry with Kies with same ending
So what Windows do you use? Do you use 8? I read some had problem with Odin and 8.x. Did you use Odin 3.0.x?
Click to expand...
Click to collapse
Yeah, forced closed odin 2 times, kies like stopped and disconnected everything on 69% leaving only the android on downloading screen but that didnt brick it, i use windows 7, odin 3.09 only gave me fails so i used 3.07 where it got stuck on nand thing.
also, any ways to backup things even though the thing is bricked? i can go to download mode fine and i think i can go into recovery too (never tried it on this phone)
Icarusu said:
Yeah, forced closed odin 2 times, kies like stopped and disconnected everything on 69% leaving only the android on downloading screen but that didnt brick it, i use windows 7, odin 3.09 only gave me fails so i used 3.07 where it got stuck on nand thing.
also, any ways to backup things even though the thing is bricked? i can go to download mode fine and i think i can go into recovery too (never tried it on this phone)
Click to expand...
Click to collapse
Your internal data (on internal SD) will be there, but Factory reset will delete your apps and its data.
Or try to flash GB with ODIN and see what happens.
shut_down said:
Your internal data (on internal SD) will be there, but Factory reset will delete your apps and its data.
Or try to flash GB with ODIN and see what happens.
Click to expand...
Click to collapse
ehh give me a tutorial of what to do to unbrick it. i really need unbrick it. its a soft brick or full brick?
Icarusu said:
ehh give me a tutorial of what to do to unbrick it. i really need unbrick it. its a soft brick or full brick?
Click to expand...
Click to collapse
It is probably soft, you can go to Odin. Way to unbrick it is to flash stock firmware with Odin - like you did. Find GB firmware and flash it with odin like you did.
http://forum.xda-developers.com/showthread.php?t=1985398
If your phone is I9070 then use firmware for I9070, if it is I9070P use I9070P firmware. If you miss this you will hardbrick phone, and not be able to use Download mode.
And do not use Hong Kong firmware.
sammobile.com and samsung-updates.com are sites where you can find firmwares.
You were on custom ROM when you did update with Kies?
shut_down said:
It is probably soft, you can go to Odin. Way to unbrick it is to flash stock firmware with Odin - like you did. Find GB firmware and flash it with odin like you did.
http://forum.xda-developers.com/showthread.php?t=1985398
If your phone is I9070 then use firmware for I9070, if it is I9070P use I9070P firmware. If you miss this you will hardbrick phone, and not be able to use Download mode.
And do not use Hong Kong firmware.
sammobile.com and samsung-updates.com are sites where you can find firmwares.
You were on custom ROM when you did update with Kies?
Click to expand...
Click to collapse
no i wasnt
also
any of those are of my region does it matter? will i get stuck in nando writing if i try this with a GB firmware?
Icarusu said:
no i wasnt
also
any of those are of my region does it matter? will i get stuck in nando writing if i try this with a GB firmware?
Click to expand...
Click to collapse
Use region next to you, I am using Italian and I am from Serbia. I do not know if you will get nand write error, you should not get it in first place. Maybe something is wrong with it...
shut_down said:
Use region next to you, I am using Italian and I am from Serbia. I do not know if you will get nand write error, you should not get it in first place. Maybe something is wrong with it...
Click to expand...
Click to collapse
Hm, alright i'll use one firmware
but what if i get the nand thing and has to force close odin again? will i get fullbrick?
Icarusu said:
Hm, alright i'll use one firmware
but what if i get the nand thing and has to force close odin again? will i get fullbrick?
Click to expand...
Click to collapse
I am not 100% sure about that. Maybe try other ODIN versions. But I used 3.0.7 without problem. Search for nand write problem to see what is it about.
P.S. Redownlaod firmware maybe, is it the same size as shown on the page when you started download?
shut_down said:
I am not 100% sure about that. Maybe try other ODIN versions. But I used 3.0.7 without problem. Search for nand write problem to see what is it about.
P.S. Redownlaod firmware maybe, is it the same size as shown on the page when you started download?
Click to expand...
Click to collapse
Yeah um it was, as i said Odin 3.09 only failed while 3.07 got stuck in nando. isnt there someone that knows about that nando thing? i readed alot but i dont think i can really find a good answer.
alright so, downloaded a 2.3.6 firmware, i download which odin? i do need download that ''odin tools'' from that link you linked me ? because it has a very old ver of odin but skipping that it has a PIT file that i dont really know what it is for.
Icarusu said:
Yeah um it was, as i said Odin 3.09 only failed while 3.07 got stuck in nando. isnt there someone that knows about that nando thing? i readed alot but i dont think i can really find a good answer.
alright so, downloaded a 2.3.6 firmware, i download which odin? i do need download that ''odin tools'' from that link you linked me ? because it has a very old ver of odin but skipping that it has a PIT file that i dont really know what it is for.
Click to expand...
Click to collapse
Sorry, use this for downgrade: http://forum.xda-developers.com/showthread.php?t=2195673
I think no matter what Odin. I used 3.07 without any problems so far.
shut_down said:
Sorry, use this for downgrade: http://forum.xda-developers.com/showthread.php?t=2195673
I think no matter what Odin. I used 3.07 without any problems so far.
Click to expand...
Click to collapse
downgrade? i was updating from 2.3.6 to Jelly bean when i bricked. i dont know if i even got to jelly bean when i bricked.
jumping to a downgrade subject of sudden is abit weird..i was just going flash it with the same version of my android and see if it would work.
do i need really to folow that method or i can keep going and flash it how you told me to?
Icarusu said:
downgrade? i was updating from 2.3.6 to Jelly bean when i bricked. i dont know if i even got to jelly bean when i bricked.
jumping to a downgrade subject of sudden is abit weird..i was just going flash it with the same version of my android and see if it would work.
do i need really to folow that method or i can keep going and flash it how you told me to?
Click to expand...
Click to collapse
Follow the whole procedure from that thread. Except the part of 16GB version, if you do not have one.
shut_down said:
Follow the whole procedure from that thread. Except the part of 16GB version, if you do not have one.
Click to expand...
Click to collapse
alright i'll do it just tell me if theres any way to backup my storage from my soft bricked cellphone because some of my stuff was in the internal storage.
Icarusu said:
alright i'll do it just tell me if theres any way to backup my storage from my soft bricked cellphone because some of my stuff was in the internal storage.
Click to expand...
Click to collapse
I am not sure if that method formats internal storage. And if you get adb shell you could do it with command or with total commander with adb plugin (for that go to my profile, to all threads I started and you will see one about it).
shut_down said:
I am not sure if that method formats internal storage. And if you get adb shell you could do it with command or with total commander with adb plugin (for that go to my profile, to all threads I started and you will see one about it).
Click to expand...
Click to collapse
mm tried adb well it dont detect it since its bricked it only turns off android to the firmware upgrade screen thing. well i'll use the method now. wish me luck
shut_down said:
I am not sure if that method formats internal storage. And if you get adb shell you could do it with command or with total commander with adb plugin (for that go to my profile, to all threads I started and you will see one about it).
Click to expand...
Click to collapse
Oh, well it worked, thanks.
still, its all gone now but i can install each app again, there wasn't much important things that i lost.
well since its normal again but without nothing, when i decide to try update it again which way you would recommend me off? i mean, a really good one that isnt by Kies?
Icarusu said:
Oh, well it worked, thanks.
still, its all gone now but i can install each app again, there wasn't much important things that i lost.
well since its normal again but without nothing, when i decide to try update it again which way you would recommend me off? i mean, a really good one that isnt by Kies?
Click to expand...
Click to collapse
Odin. Like you did now, just with JB firmware for your I9070 model (P or non P, if you miss that you will hard brick, for example if you flash P firmware on non P phone, and otherwise).
Just follow this http://forum.xda-developers.com/showthread.php?t=1985398
Simple as - put firmware in PDA, hit flash. And check if you have unchecked/checked as it is written there.
Probably Kies was the problem, because that nand write error. He messed up, and now this fixed it.
shut_down said:
Odin. Like you did now, just with JB firmware for your I9070 model (P or non P, if you miss that you will hard brick, for example if you flash P firmware on non P phone, and otherwise).
Just follow this http://forum.xda-developers.com/showthread.php?t=1985398
Simple as - put firmware in PDA, hit flash. And check if you have unchecked/checked as it is written there.
Probably Kies was the problem, because that nand write error. He messed up, and now this fixed it.
Click to expand...
Click to collapse
mmm. alright so i should get the jelly bean firmware from that website then use it on odin as its listed. should i use the odin listed in that thread or any ver. will do? any region will work?